Dear Massimo and Kolusu,
Thank you for your help. I got the results I wanted. The results are as follows.
MSGID NUMREC
$HASP000 20
$HASP001 10
..
>DISTINCT COUNT: 530
I also appreciate Kevin McKenzie's reply.
Th
Terri,
The HOME is only used for DEVICE/LINK. You specify the "home address-es"
on the interface.
For example
INTERFACE IFPORTCP6
DEFINE IPAQENET6
CHPIDTYPE OSD
PORTNAME PORTA
INTFID 2:2:2:2
* IPADDR FC00:2::2:2:2 *
INTERFACE IFPORTCP6
ADDADDR 2001:DB8::9
The doc also says
Hi,
Our z/OS system has a physical ip address and a VIPA address.
We set TCPSTACKSOURCEVIPA so that the origin address is always the VIPA address.
We have a new server that is in the same network as the z/OS system's physical
address. We need to send information from z/OS to this server.
Since z/
Gadi,
I was not sure of the problem, and where the specific started task comes in.
Can you ping the RHEL server from z/OS?
If the ping fails it could be due to two reasons
1. z/OS does not know about the RHEL address
2. The ping request got to RHEL, but RHEL does not know the route to get
back to
The problem was solved using Firewall definitions.
Apparently not all people who work on firewall are created equal.
Gadi
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Colin Paice
Sent: יום ה 27 יולי 2023 12:03
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Network ques
Jason,
as usually, it depends.
About Operlog analysis, it depends on the response-time you need.
At different customer sites I use automation product (BMC, IBM, Broadcom)
in order to catch specific messages and react asap with specific actions or
simply sending SMS/Mail.
Some others use external
I take it that you can't read. "I would have expected" is not a claim of fact.
Or did you know that and choose to lie about it?
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on beh
z/OS uses a DIAG to communicate with the HMC; this is true even when running on
a bare LPAR. I'm not aware of any publicly available documentation.
Do you have a CONSOLE with DEVNUM(HMCS) or DEVNUM(SYSCONS)?
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
Thanks. I think what I have is correct, its just looks different now, because
a plain hometest, shows loopback first, but if you NETSTAT HOME under FLG is my
primary INTERFACE.
Ms Terri E Shaffer
Senior Systems Engineer,
z/OS Support:
ACIWorldwide - Telecommuter
H(412-766-2697) C(412-519-2592)
Dear Max
I am writing to you regarding two questions that I have.
The first question is about how to monitor and alert the system issues. We can
monitor most of the issues and send alerts to our phones. However, when we
cannot provide a complete list of msgids to the monitoring system, some
cr
Thank you
Sent from my iPhone
No one said I could type with one thumb
> On Jul 27, 2023, at 01:22, david rintoul wrote:
>
> Hi,
> They are all 4k.
> Yes i have to move my head.
> Its largely historical - I started with a 43". then 1x43" with 2x27" in
> portrait mode.
> And now 2x43" and 2x2
Jason,
for you first question I could say experience.
All my customer sites have different "hot messages" to look at.
Others are only warning, others (the most of) are simply ignored.
I cannot simply share them.
I could give you some "generic hints" like:
- JES Spool over x% then add a spool v
Classification: Confidential
WS/SFTP?
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Steve Estle
Sent: Wednesday, July 26, 2023 4:07 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Preferred FTP Client for Windows
[CAUTION: This Email is from outside the Organization. Unl
>> Can dfsort delete the last word if the first position is M and the last word
>> is a number?
Jason,
Quite simple, you need to show me an example, the length of the last word and
the DCB properties of the input file and I can show you how to do it.
Thanks,
Kolusu
DFSORT Development
IBM Corpo
Long ago and far away I helped an IBM customer set up his new 148 VS1
machine to use CICS. At that time it had the macro interface, but as an
assembly programmer that was good for me. 3270s were very new at the time
and controlling the screen appearance was important. The customer was an
Electric
When the OAM address space initializes we get the list of libraries that are
"connected" to the system from the active SMS SCDS. Based on that list we try
and obtain information about the library resulting in the error messages being
displayed. Since the libraries no longer exist, you can eith
On Wed, 26 Jul 2023 17:50:40 -0500, Wendell Lovewell wrote:
>Thanks Bill, that's very helpful.
>
>Please let me see if I have this straight yet:
>
>- If there is a format-8 DSCB, there will be a format-9 DSCB.
>
>- If there are > 3 extents (which are handled by the format-1) but < 133
>extents, t
? By the time the 370/148 came out 3270s were old hat.
3270-1? Did you mean 3277-1? I never saw one in the flesh, and it was way to
small.
OS/VS1 did have some things that MVS did not
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM M
Thanks for the MOVEit Freely suggestion, but it doesn't actually work in
passive mode with our z/OS communications server.
MOVEit Freely is sending command PASV. The server returns:
227 Entering Passive Mode (128,212,110,33,238,85)
Which results in a MOVEit error: Invalid response to PASV.
Ho
Hi Michael,
Try winscp.com command interface.
Works like a charm with MVS dataset.
Ciao,
--
Raphael Dal Pos / z/OS Support
GOSP Generali Operations Services Platform
Infrastructure Services/Technologie et Services Locaux France
11-17, Avenue F
In the days when 3270-2 was the best available, and 3279s with colour were
just announced, a team from a bank came round to see these new machines.
One of the executives asked "why do we need colour?" The reply from a
quick thinking developer was "so you can display overdrawn accounts in
red!" - a
When I got into systems work in 1982, I was at an engineering shop. All of
the terminals were 3278-2s aside from a few leftover 3277-2s. There was
exactly one 3279-S3G, in the general manager's office so he could do GDDM
charts.
On Thu, Jul 27, 2023 at 11:02 AM Colin Paice wrote:
> In the days w
Hi, Jason. If all you’re looking to do is summarize log data, I can give you
some options, at least.
There was/is a tool that Kevin Kelley, since retired, wrote to help clients do
log analysis that would do exactly what you want, on platform, in batch; I’m
trying to find it again. It was avai
I don't have the spare time to run tests proving things but there is absolutely
no doubt in my mind that I have used it successfully in passive mode, running
against the IBM Dallas datacenter z/OS.
CM
On Thu, 27 Jul 2023 15:39:57 +, Schmitt, Michael
wrote:
>Thanks for the MOVEit Freely s
I tested it extensively and hit too many issues with the MVS side. I worked
with the developer, who tried to fix them, but ultimately he gave up.
For example, CD to a subfolder and then enter CD 'node'.
And the more you CD the worse it gets, because WinSCP keeps a cache of past
directories. You
On Thu, 27 Jul 2023 16:27:23 +, Schmitt, Michael wrote:
>...
>And, WinSCP makes incorrect assumptions about what data looks like coming back
>from listing PDS libraries. For example, you can not use WinSCP to download a
>member of a PDS that does not have ISPF statistics.
>
How much of t
Back in the 1990's I attended several classes at IBMon Diagonal
Highway.
Well back then the property was overrun by prairie dogs. And IBM boulder
Could not get the permits to poison them out of existence.
Some really smart guy to bring in maybe 2 dozen Barn Owle's and them
Funny how great nature is at keeping a balance. Except humans.
Sent from Yahoo Mail for iPhone
On Thursday, July 27, 2023, 12:58 PM, Steve Beaver
wrote:
Back in the 1990's I attended several classes at IBM on Diagonal
Highway.
Well back then the property was overrun by prairie
z/OS MVS team doesn't want to install NFS.
Here's another problem: We used to be able to view MVS data sets and members
using the IBM web server. I think this is mod_mvsds?
Anyway, this only works with basic authentication. But basic authentication has
been removed from the web browsers for se
Found it. The tool that should do what you want, with a bit of figuring out
the syntax of the JCL, is
https://github.com/IBM/IBM-Z-zOS/tree/main/zOS-Tools-and-Toys/msglg610. Among
other things, given a syslog, it will print out the number of times each
message ID appears in the syslog.
Note
What about z/OSMF?
--
Kevin McKenzie
External Phone: 845-435-8282, Tie-line: 8-295-8282
z/OS Test Services - Test Architect, Provisioning
z/OS Hardware/Software Interlock
From: IBM Mainframe Discussion List on behalf of
Schmitt, Michael
Date: Thursday, July 27, 2023 at 1:19 PM
To: IBM-MAIN@L
Also not installed.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Kevin Mckenzie
Sent: Thursday, July 27, 2023 1:05 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Preferred FTP Client for Windows
What about z/OSMF?
--
Kevin McKenzie
External Phone: 845-435-8282, Ti
On Thu, 27 Jul 2023 11:58:42 -0500, Steve Beaver wrote:
>Back in the 1990's I attended several classes at IBMon Diagonal
>Highway.
>Well back then the property was overrun by prairie dogs. And IBM boulder
>Could not get the permits to poison them out of existence.
>
>Some really smart guy to
It has been a while since I downloaded IBM's Tape Tools. Using the instructions
I got from our mainframe provider
does not work. The instructions assume a non AT-TLS FTP connection. Yet, when I
run the provided FTP script,
from both a batch job and TSO READ mode, I get
550 SSL/TLS required on th
On Thu, 27 Jul 2023 17:18:57 +, Schmitt, Michael wrote:
>z/OS MVS team doesn't want to install NFS.
>
Why?
>Here's another problem: We used to be able to view MVS data sets and members
>using the IBM web server. I think this is mod_mvsds?
>
Read/Write?
>Anyway, this only works with basic a
I think we had two 3279-3B’s in our branch. The rest were 3278’s.
Recall IBM had gone to PROFS-based email at that point (mid 1980’s) so
terminals were something everybody in the branch needed.
Cheers, Martin
From: IBM Mainframe Discussion List on behalf of Jay
Maynard
Date: Thursday, 27 Jul
I meant IBM doesn't have a solution for mod_mvsds using modern authentication.
Or so I was told.
I don't remember what the deal was with NFS when I asked about it 3 years ago.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Paul Gilmartin
Sent: Thursday, July 27, 2
>> Does anybody have a recent copy of their JCL to download the Tape Tools? We
>> asked the mainframe provider.
Richard,
Try this ( don’t forget to change the your.emailid in the INPUT dd sysin)
//FTP EXEC PGM=FTP,
//PARM='PUBLIC.DHE.IBM.COM (EXIT'
//OUTPUT DD SYSOUT=*
//
Hi Bill.
I can confirm that in a format-3 record with all 13 slots filled, the DS3PTRDS
field points to the CCHHR of the next format-3. And the "next" slot in the
format-9 record then points to the next format-3.
I tried to confirm that there will be a second format-9 record for a file with
>
Five out of ten top banks in the world are from China. I believe their
number of accounts is huge as there are almost 1.5 billion citizens in
china.
I looked at linkedin and none of them runs on mainframe no z/os programmers
of any kind: developers sysprogs, DBAs, etc.).
How do they run such a big
I don't know, I just responded to modify the subject line a bit.
On 7/27/2023 12:50 PM, ITschak Mugzach wrote:
Five out of ten top banks in the world are from China. I believe their
number of accounts is huge as there are almost 1.5 billion citizens in
china.
I looked at linkedin and none of the
Unfortunately, by 2021, LinkedIn shut down its flagship networking service in
China. When the Microsoft-owned networking platform cited compliance issues and
a “significantly more challenging operating environment,” it wasn’t surprising.
Chinese banks still use mainframes.
Sent from Yahoo Mai
tx, Tom
*| **Itschak Mugzach | Director | SecuriTeam Software **|** IronSphere
Platform* *|* *Information Security Continuous Monitoring for Z/OS, zLinux
and IBM I **| *
*|* *Email**: i_mugz...@securiteam.co.il **|* *Mob**: +972 522 986404 **|*
*Skype**: ItschakMugzach **|* *Web**: www.Securitea
Many other roles at these banks are still on linkedin. Why are only
mainframe profs removed from linkedin ;-) ?
*| **Itschak Mugzach | Director | SecuriTeam Software **|** IronSphere
Platform* *|* *Information Security Continuous Monitoring for Z/OS, zLinux
and IBM I **| *
*|* *Email**: i_mugz..
https://community.ibm.com/community/user/ibmz-and-linuxone/blogs/andrii-vasylchenko1/2019/02/20/cmb-zosmf-makes-ibm-mainframe-more-open-and-modern
LinkedIn, Twitter, Meta have no presence in China.
Sent from Yahoo Mail for iPhone
On Thursday, July 27, 2023, 4:10 PM, Itschak Mugzach
<03051
I would rephrase the question.
We know the 95 of top 100 banks are using mainframes. The same for
airlines, retailers, etc.
Numbers presented may differ slightly, but it doesn't matter.
The question is: WHAT ABOUT THE REST???
I would like to know in details the remaining 5 cases.
BTW: In Pol
W dniu 27.07.2023 o 21:30, Wendell Lovewell pisze:
Hi Bill.
I can confirm that in a format-3 record with all 13 slots filled, the DS3PTRDS field
points to the CCHHR of the next format-3. And the "next" slot in the format-9
record then points to the next format-3.
I tried to confirm that ther
Erika Dawson wrote:
>When the OAM address space initializes we get the list of libraries
>that are "connected" to the system from the active SMS SCDS. Based on
>that list we try and obtain information about the library resulting in
>the error messages being displayed. Since the libraries no longer
If you no longer have any tape libraries in your environment and don't use OAM
for other reasons, then it should be safe to shut it down.
Mark Jacobs
Sent from ProtonMail, Swiss-based encrypted email.
GPG Public Key -
https://api.protonmail.ch/pks/lookup?op=get&search=markjac...@protonmail.c
Hi Jon,
You said: "...Detaching a "console" requires a "DEFINE CONSOLE" ..."
AFAIK, (since VM R6.0) this statement has never been true.
Regards,
David
On 2023-07-26 23:37, Jon Perryman wrote:
> On Tuesday, July 25, 2023 at 07:14:21 PM PDT, Steve Horein
wrote:
Just out of curiosity, is ther
Jon Perryman wrote:
>"detach" is a generic command that eliminates a virtual address
>regardless of how the virtual address was defined. "attach" is for
>attaching real VM addresses to a user at a virtual address. Detaching
>a "console" requires a "DEFINE CONSOLE". Detaching a "GRAF" requires a
>"D
David is, of course, correct that DETACH doesn't require a DEFINE. I think Jon
meant they were the opposites for the virtual console, rather than
DETACH/ATTACH.
If you want, say, a real tape drive attached to your virtual machine (remember
tape drives?), you (or more likely an operator or servi
Worst job: the poor guy who had to put the wee IBM badges on the owls!
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
> On Thursday, July 27, 2023 at 03:22:06 AM PDT, Seymour J Metz
> wrote:
> I take it that you can't read. "I would have expected" is not a claim of fact.
Your many expectations are too often silly wild ass guesses. More than once in
this thread alone, you've spewed absolute non-sense that le
> On Thursday, July 27, 2023 at 04:03:52 PM PDT, David Spiegel wrote:
> You said: "...Detaching a "console" requires a "DEFINE CONSOLE" ..."
> AFAIK, (since VM R6.0) this statement has never been true.
Hi David,
Can you explain why this is false or how I have this wrong? Steve said device
but h
Jon Perryman wrote:
>Can you explain why this is false or how I have this wrong? Steve said
>device but he really meant to say virtual device. The antonym of
>ATTACH is DETACH but strangely DETACH has many antonyms (e.g. ATTACH,
>DEFINE CONSOLE, DEFINE GRAF, ...). If you detach a console, then the
Dear Kevin,
Thank you very much for your time and effort to help me find useful tools for
log analysis. I appreciate your detailed and informative response. I will try
each of the tools you suggested and see which one works best for me.
By the way, I have a question about IBM Z Operational Log
Hi Jon,
A SPECIAL (in the directory) can also be DETACHd.
Regards,
David
On 2023-07-27 20:51, Jon Perryman wrote:
> On Thursday, July 27, 2023 at 04:03:52 PM PDT, David Spiegel wrote:
You said: "...Detaching a "console" requires a "DEFINE CONSOLE" ..."
AFAIK, (since VM R6.0) this statement h
Dear Max,
Thank you very much for your effort and help to provide me with a complete
solution for my problem using SORT. That is exactly what I needed. I appreciate
your expertise and generosity in sharing your sample JCL. It was very helpful
and clear. I will use it as a reference and tailor i
I believe that many Chinese banks ran mainframe but were limited to DOS/VSE
not MVS due to technology embargoes.
I also heard that huge numbers were running bootleg versions, including
Hercules.
When I worked in Indonesia, the company I worked at (A state enterprise)
ran lots of unlicensed softwa
Mike Schwab said:
*One thong that helps ImMS is that everything related to a root key
isstored together, where as DB2 each segment is a separate database.*
Thinging the wrong thong methinks.
For starters, a DB2 database can have many tables/tablespaces. From a
physical POV an IMS DB can be a si
PKB. The fact that you don't understand something doesn't make it silly.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of Jon
Perryman [jperr...@pacbell.net]
Sent: Thursd
Given past discussions I should've mentioned this information a while ago, when
it was announced in September, 2022. Better now than never! :-)
IBM offers an additional physical tape storage option for z/OS (and other
operating systems). It's available with this combination of equipment:
1. IBM
63 matches
Mail list logo
