> f you allocate a DD in your JCL with SYSOUT going to SMTP, and specify
> FREE=CLOSE,
> then your emails will be sent to SMTP when you close the DD in REXX, (EXECIO
> with FINIS option).
> You can use the same DD over and over as long as you don't FREE it.
Closing it will free it. Also, you rea
You can also use the SDSF/REXX interface to issue console commands and retrieve
the response.
IBM provides several examples of this.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
ITschak Mugzach
Sent: Monday, May 18, 2020 1:37 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subjec
Don't forget to assign yourself the right security definitions for, e.g.,
CONSOLE, MVS.SET.SMS and MVS.SETSMS.SMS resources, OPERPARM segment.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV
Eileen, the issue is not how to issue the command, but the fact that the
activation completes asynchronously from the command itself.
Easiest way but not exact would be to issue a the command, then use something
like OSHELL sleep command for some number of seconds in the jobstream.
With SDSF you can check the job logs and SYSLOG for messages and issue
additional commands against the job to interrogate it if it is supported.
You can also wait for responses and do a lot of other things with SDSF/REXX or
SDSF/Java.
-Original Message-
From: IBM Mainframe Discussion Li
Surely a simple answer is: you have to do it yourself.
In general, it is likely impossible because you do not know if the
customer might be setting the clock to their local time and not using the
protocols such as having the clock be UTC with the timezone being the
offset from UTC.
The custo
I forgot about the IANA Time-Zone database. That does seem to be the
standard.
I don't see that Unix has anything to do with it.
sas
On Mon, May 18, 2020 at 1:41 AM Mike Schwab wrote:
> East Bank Palestinians and Israelites use different times for the same
> location
> Line Islands in Kiribat
But make sure that uss & mvs clocks are the same.
בתאריך יום ב׳, 18 במאי 2020, 15:28, מאת Steve Smith :
> I forgot about the IANA Time-Zone database. That does seem to be the
> standard.
>
> I don't see that Unix has anything to do with it.
>
> sas
>
> On Mon, May 18, 2020 at 1:41 AM Mike Schwa
Java has several classes and API methods to get the time zone.
Where does the JVM determine this info -is is not from the Unix settings?
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
ITschak Mugzach
Sent: Monday, May 18, 2020 8:33 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Sub
On 2020-05-18 8:40 PM, Barkow, Eileen wrote:
Java has several classes and API methods to get the time zone.
Where does the JVM determine this info -is is not from the Unix settings?
Yes, but you better make sure the TZ, _TZ variables are set correctly!
ISO-8601 flattens this issue somewhat as
Excuse me, but IMHO RECOVERY does "format" CIs within CA - that means
proper values are written into CIDF and RDF (in any).
That means VSAM knows the CI is empty, or partially filled. Unused space
within CI is not cleared, there is no need for that.
From the other hand physically full block is wr
Speaking of TZ, by coincidence I just stumbled across its full
documentation in UNIX System Services Command Reference Appendix I.
Format
TZ= standardHH[:MM[:SS]] [daylight[HH[:MM[:SS:]]]
[,startdate[/starttime],enddate[/endtime]] ]
It describes all those elements. I wasn't even aware of the DS
On 5/17/2020 9:48 PM, Glenn Miller wrote:
I have a question or two for the group.
Does anyone still use the ASAP (Automatic Software Alert Process) "application" of IBM Servicelink?
My reason for asking...it appears (is) broke. The last Email I received from the ASAP application was on
April 2
W dniu 16.05.2020 o 21:54, esst...@juno.com pisze:
I am Not a DASD Administrator -
.
However I used the following JCL to move a PDS -
//STEP1EXEC PGM=ADRDSSU
//SYSPRINT DDSYSOUT=A
//DASD1DDUNIT=3390,VOL=(PRIVATE,SER=USER12),DISP=OLD
//DASD2DDUNIT=3390,VOL=(PRIVATE,SER=USE
Easy to read, if you're authorized.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of
R.S. [r.skoru...@bremultibank.com.pl]
Sent: Monday, May 18, 2020 9:03 AM
To: IBM-MAIN
Offset, yes, but not zone name.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of
David Crayford [dcrayf...@gmail.com]
Sent: Monday, May 18, 2020 8:45 AM
To: IBM-MAIN@LIST
On Mon, 18 May 2020 08:16:20 -0400, Peter Relson wrote:
>
>... the protocols such as having the clock be UTC ...
>
More precisely, the PoOps under TOD Programmable Register
suggests (actually avers) that the TOD be set not to UTC but
to TAI-10 seconds; currently about half a minute faster.
>The c
I've been staying out of this conversation; sometimes I fail to read carefully,
but this time I actually understood the question, so I kept my mouth shut, not
knowing the answer.
...Except for the obvious possibility, of course. But no one seems to have
mentioned that possibility yet, except M
On Mon, 18 May 2020 10:15:55 +, Seymour J Metz wrote:
>> f you allocate a DD in your JCL with SYSOUT going to SMTP, and specify
>> FREE=CLOSE,
>> then your emails will be sent to SMTP when you close the DD in REXX, (EXECIO
>> with FINIS option).
>> You can use the same DD over and over as l
On Mon, 18 May 2020 09:38:01 -0400, Steve Smith wrote:
>Speaking of TZ, by coincidence I just stumbled across its full
>documentation in UNIX System Services Command Reference Appendix I.
>
>Format
>TZ= standardHH[:MM[:SS]] [daylight[HH[:MM[:SS:]]]
>[,startdate[/starttime],enddate[/endtime]] ]
>
On Sun, 17 May 2020 12:21:20 -0700, Charles Mills wrote:
>The heck with it! I wanted it for the "Date:" line in an outgoing e-mail but
>it appears that SMTP provides a sent timestamp if I don't, so the heck with
>it!
>
>Thanks all for your efforts. Why should something so basic be so hard?
>
>Cha
> You would think that IBM's "Premiere OS" would be able to provide something
> this simple! :-)>
Not when it's still missing features from OS/VS1 and z/VSE.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion List [
FSVO needed. If you want the space freed when the e-mail is sent instead of
waiting for the job to end, then you need SPIN=UNALLOC. If you don't care then
you don't.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion
Ed,
This has been a headscratcher to me for a long time. I tried similar example:
//OMVS EXEC PGM=BPXBATCH,REGION=128M
//SYSPRINT DD SYSOUT=*
//SYSTSPRT DD SYSOUT=*
//SYSOUT DD SYSOUT=*
//STDPARM DD *
Peter,
Thanks for your comments and questions. As I replied later in the thread, I
was incorrect in posing my original question because the file to be sent is
actually a VSAM file. Not sure at this time if it is KSDS or ESDS, as the
question was posed to me by a co-worker in another applicati
On Mon, 18 May 2020 11:26:17 -0500, Dale R. Smith wrote:
>
>z/VM has a CP QUERY TIMEZONE command:
>query timezone
>Zone Direction Offset Status
>UTC 00.00.00 Inactive
>GMT 00.00.00 Inactive
>EDT West 04.00.00 Active
>EST We
On Mon, 18 May 2020 16:37:09 +, Jousma, David wrote:
>...
>Yet, I only see PID's associated my own UID instead of UID(0)
>...
It's a security feature, enforced mostly by IBM. SDSF may allow
finer-grained control. From the Command Ref. for ps:
... However, these op
SDSF? I don’t think so.
If I run this way.
//STDPARM DD *
SH echo 'ps -ef' | su
/*
Then I get the expected results...
_
Dave Jous
On 5/18/2020 9:37 AM, Jousma, David wrote:
//OMVS EXEC PGM=BPXBATCH,REGION=128M
//SYSPRINT DD SYSOUT=*
//SYSTSPRT DD SYSOUT=*
//SYSOUT DD SYSOUT=*
//STDPARM DD *
SH su;
ps -ef
/*
For that I would try: echo ps -ef | su
--
Phoenix Software International
Edward E. Jaffe
831 P
Depends on the date. If it is during daylight savings, MDT, otherwise CST.
-0500 used to prevent a bit of a challenge. EST, CDT, or Indiana EST all year.
On Mon, May 18, 2020 at 5:02 PM Paul Gilmartin
<000433f07816-dmarc-requ...@listserv.ua.edu> wrote:
>
> On Mon, 18 May 2020 11:26:17 -0500,
My subsequent response was indeed that. My point though is that "su" followed
by some other commands do not appear to be executing as UID(0) authority.
_
Dave Jousma
AVP | Manager, Systems Enginee
It has been a few decades since I have created a new SMS environment.
Current environment is parallel sysplex replete with CFs and lots of lpars.
I am trying to create a simple SMS environment that will be part of a monoplex
consisting on one lpar.
I did the following:
1. Defined the new S
On 5/18/2020 10:56 AM, Jousma, David wrote:
My subsequent response was indeed that. My point though is that "su" followed
by some other commands do not appear to be executing as UID(0) authority.
Yes, that's normal and expected behavior. You can see what's happening
if you logon and issue t
Hi Bob, been a while for me also, but in my current sysplex I have systems
defined that no longer exist, my ACS routines do not check for these systems.
my base configuration has 4 systems in the plex, only 3 exists, not sure this
helps you but I think you are on the right track
Carmen Vitul
I forgot to mention, once the base is activated, you can alter the
configuration and remove systemsIIRC
Carmen Vitullo
- Original Message -
From: "Robert B. Richards" <01c91f408b9e-dmarc-requ...@listserv.ua.edu>
To: IBM-MAIN@LISTSERV.UA.EDU
Sent: Monday, May 18, 2020 1:36:2
Thanks Carmen. I'll post the results when I try an IPL of that new system and
SMS starts up
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Carmen Vitullo
Sent: Monday, May 18, 2020 3:05 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Creating new SMS environment in a m
Did anyone attend the Technical Disclosure meeting in NY?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
On Mon, 18 May 2020 at 16:04, Steve Beaver wrote:
> Did anyone attend the Technical Disclosure meeting in NY?
>
No - absolutely no one! IBM, like everyone else, has been doing pretty much
everything online lately.
Tony H.
--
F
I don't believe this is true. I know that Db2 will only "pre-format" a subset
of pages when it opens a newly created LDS, or adds a new extent, rather than
pre-formatting the entire dataset/extent.
Wayne Driscoll
Rocket Software
Note - All opinions are strictly my own.
-Original Message
OS/VS1 ... like CRJE and IEHIOSUP?
On 2020-05-18 12:32, Seymour J Metz wrote:
You would think that IBM's "Premiere OS" would be able to provide something this
simple! :-)>
Not when it's still missing features from OS/VS1 and z/VSE.
--
Shmuel (Seymour J.) Metz
https://eur02.safelinks.protect
It was yanceled due to yovid-19. SHARE in Yoston, too.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Steve Beaver
Sent: Monday, May 18, 2020 1:05 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Yechnical
Did anyone attend the Tech
Messages in z/OS do not wrap and are not formatted. Messages are written using
either WTO (single message) or MLWTO (multiple lines of a message). WTO allows
you to write a single message which I think has a max length of somewhere
around 128 bytes. Multi-line messages are multiple MLWTO's (one
[Default] On 18 May 2020 14:49:23 -0700, in bit.listserv.ibm-main
charl...@mcn.org (Charles Mills) wrote:
>It was yanceled due to yovid-19. SHARE in Yoston, too.
Share is planning an online conference. See www.share.org. I may
attend.
Clark Morris
>
>Charles
>
>
>-Original Message-
>Fro
This decision was prompted by the Boston mayor's announcement that gatherings
of >100 would not be allowed until Labor Day at least. SHARE was scheduled for
early August. The event is under reconstruction.
.
.
J.O.Skip Robinson
Southern California Edison Company
Electric Dragon Team Paddler
SH
[Default] On 18 May 2020 09:38:34 -0700, in bit.listserv.ibm-main
peter.far...@broadridge.com (Farley, Peter x23353) wrote:
>Peter,
>
>Thanks for your comments and questions. As I replied later in the thread, I
>was incorrect in posing my original question because the file to be sent is
>actual
> Messages in z/OS do not wrap and are not formatted.
In the nextt paragraph you say the opposite.
> Multi-line messages are multiple MLWTO's
No, it's generally what its name suggests, a single WTO that specifies multiple
lines of text, although there is a CONNECT parameter that allows you to
CRJE
All very well for a 2741, but for a 3270 I'd much rather have SuperWylbur or
ISPF, TYVM.
> IEHIOSUP
My eyes! Take the bad thing away, Mommy!
I was thinking more of Compatibility Interface and Reverse Compatibility
Interface. Is there any good reason that I can't do sequential I/O on a PS
[Default] On 18 May 2020 18:19:07 -0700, in bit.listserv.ibm-main
sme...@gmu.edu (Seymour J Metz) wrote:
>CRJE
>
>All very well for a 2741, but for a 3270 I'd much rather have SuperWylbur or
>ISPF, TYVM.
>
>> IEHIOSUP
>
>My eyes! Take the bad thing away, Mommy!
>
>I was thinking more of Compatibi
An RCI makes it easier to, e.g., migrate PS to ESDS, since you don't have to
change all of the applications in one swell foop.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on beha
On Mon, 18 May 2020 21:41:00 -0300, Clark Morris wrote:
>...
>This gets curiouser and curiouser. Unless the receiver of the file is
>either z/OS or z/VSE, how is the file going to look? Is what is
>actually being sent a sequential copy of the file? Also the
>transmitting mechanism may well h
On 5/18/2020 4:53 PM, Jesse 1 Robinson wrote:
This decision was prompted by the Boston mayor's announcement that gatherings of
>100 would not be allowed until Labor Day at least. SHARE was scheduled for
early August. The event is under reconstruction.
You've got an extra zero there, my friend
Does anybody have an announcement or other document that I can cite for "The
source code is covered by a non-disclosure agreement or a license that allows,
for example, study and modification, but not redistribution." in the wikipedia
article [[Proprietary software]] to document IBM's licensed t
Oh SHARE... please have a free-to-attend option.
Not many people (apart from the regulars) know about SHARE to begin with (not
disrespecting, just comparing the SHARE audience count vs the number of
mainframers in real world) ... so a free-to-attend option would be a welcome
gift for those who a
https://www-03.ibm.com/software/sla/sladb.nsf/sla/home?OpenDocument
Jon.On Monday, May 18, 2020, 07:54:19 PM PDT, Seymour J Metz
wrote:
Does anybody have an announcement or other document that I can cite for "The
source code is covered by a non-disclosure agreement or a license that
Ibm have it today here in Israel.
בתאריך יום ב׳, 18 במאי 2020, 23:04, מאת Steve Beaver :
> Did anyone attend the Technical Disclosure meeting in NY?
>
>
>
>
>
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructio
Is there optional source code for any IBM software announced or released after
May, 1999? I didn't see anything there that related to permissible and
impermissible use of source code.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
From: IBM Ma
Here's the clarification from IBM... (the field being referred to is UDATASIZ,
which is where the restriction statement popped up)...
"Unfortunately that field is only valid for extended format VSAM and non-VSAM
data sets, as it is maintained in the extended format cell. It was introduced
pri
57 matches
Mail list logo
