Hi,
Installed Gnucash 5.5 for Windows.
I notice that running the included report Net Worth Linechart (under Assets &
Liabilities) almost immediately crashes the UI - no message that I can see.
The LCK file is left open as well.
I found this out when I tried to run one of my saved report confi
Hello John
I uninstalled the GNU cash completely after saving my account files.
And then downloaded exe file again from sourceforge and reinstalled again.
After reinstall, the problem and error message i reported earlier disappeared.
I think some thing might have gone wrong during my earlier in
Hello Adrien
Thanks a lot for sparing your time to check on my problem. Really appreciate
your support.
I did what you have suggested and i could get back my balance column and along
with the balance amount in my bank account ! 😁😁.
This made me think, in order to prevent this from recurring
Your welcome, and I'm glad you were able to recover the column.
Your suggestion sounds like a good idea. But what would be even nicer
would be a menu option to restore default widths for any register in one
click. (this is currently possible with invoice/bill column widths, but
not registers,
I just tested the flatpak in a Linux Mint Vanessa VM and it works fine
with no crash.
I am getting some console messages when it runs reports that seem to
indicate some issues, but the report(s) otherwise show up just fine.
Those could just be specific to flatpak.
Your crash is either Window
This is the second thread about reports crashing on Windows. I'm not
sure if that is relevant, but like the other thread, I just tested the
Net Worth Linechart with a simple file using the flatpak in a Linux VM
and it does not crash. It produces the Linechart as expected.
So this is either som
I also have Gnucash crashing in Window 11 in when opening an
Expense/Income chart in Reports/Saved/Report Configuration.
Restarting Gnucash displays "Could not obtain the lock for C:" Task
Manager does not show
Gnucash as running. "Open anyway" does open Gnucash as expected but
attempting t
Thank you for that excellent insight.
I'll review the code to see if there is anything glaring that I can see before
going on the code modification/compile/test cycles. If I have query in regards
to the C++ code, shall I do so here or shall I switch over to the
gnucash-devel?
-Original
On 2023-12-19 02:43, Anthony Vanson wrote:
> Restarting Gnucash displays "Could not obtain the lock for C:" Task
> Manager does not show
> Gnucash as running. "Open anyway" does open Gnucash as expected but
> attempting trying to open the above report, crashes again. Any fix please?
Restarting GC
On 2023-12-19 00:33, Paras Desai wrote:
> This made me think, in order to prevent this from recurring by some
> careless guys like me, is it possible to restrict the width of each
> column to a minimum dimension of pixels?
That _looks_ like an idea, but I would not support it because sometimes
Hi everyone,
I've been using version 2.6.xx (11, I think) for a long time, but read the
recommendation for everyone to upgrade to a newer version. I also read the
recommendation to upgrade in steps from the last stable release of each
version to the next: 2.6.21, 3.11, 4.14.
I was able to u
Haha…😊
Honey Butter Cinnamon Sweet Potato Fries, please … two of them.
From: G R Hewitt
Sent: Monday, December 18, 2023 3:32 PM
To: Kalpesh Patel ; GnuCash User List
Subject: Re: [GNC] Accounting Period Change issue
Will you want fries with that?
On Mon, 18 Dec 2023 at 20:13,
Thank you, for being flameless. My ears are all yours to listen to the
explanation...
I actually didn’t tell the whole story ... I did software development for good
chuck of my early career in the computer field (worked with through
MIL-STD-2167/A when it was de-facto).
I am concurring that DA
On 12/19/2023 10:40 AM, Kalpesh Patel wrote:
Thank you, for being flameless. My ears are all yours to listen to the
explanation...
I actually didn’t tell the whole story ... I did software development for good
chuck of my early career in the computer field (worked with through
MIL-STD-2167/A
On 2023-12-19 07:40, Kalpesh Patel wrote:
> I am concurring that DATA is in a file of "program data" that gets read
> in when the "program" starts and that the "change accounting period"
> function changes this data.
But it doesn't. The accounting period is a setting, not data. Changing
the acc
Paras,
Thanks for the followup.
Regards,
John Ralls
> On Dec 19, 2023, at 00:17, Paras Desai wrote:
>
> Hello John
>
> I uninstalled the GNU cash completely after saving my account files.
>
> And then downloaded exe file again from sourceforge and reinstalled again.
>
> After reinstall,
Kalpesh,
That code is in C. If the question is along the lines of "how does this
function work" it's probably better in gnucash-devel or on IRC. If you find
something specific to the problem at hand it's better to keep it in this thread
for context.
Regards,
John Ralls
> On Dec 19, 2023, at 0
> On Dec 19, 2023, at 00:04, WR D wrote:
>
> Hi,
>
> Installed Gnucash 5.5 for Windows.
>
> I notice that running the included report Net Worth Linechart (under Assets &
> Liabilities) almost immediately crashes the UI - no message that I can see.
> The LCK file is left open as well.
>
>
I just installed GnuCash 5.5 yesterday (upgraded from 5.4.1) and noticed
that I am not able to change the status of Scheduled Transactions from the
Actions | Scheduled Transactions | Since Last Run dialog box. When I click
on the status field of any of the transactions in the Since Last Run..
dialo
Hello John
It seems that this issue is bit adamant.
After uninstalling and reinstalling, the message disappeared as i reported.
But when i set to enter transactions this evening, the message again reappeared.
So I restarted computer and open gnucash, it opened without error message. I
tried to
When I try to 'join' #gnucash on libera.chat I get;
Cannot join #gnucash (Channel is invite only).
--
~mark petryk
~w:http://www.lorimarksolutions.com
___
gnucash-user mailing list
gnucash-user@gnucash.org
To update your subscription preferences or
Hi,
On Tue, December 19, 2023 1:13 pm, Mark at Lorimark wrote:
> When I try to 'join' #gnucash on libera.chat I get;
>
>> Cannot join #gnucash (Channel is invite only).
We are not on libera.chat -- we are at irc.gimp.net.
-derek
> Please remember to CC this list on all your replies.
> You can d
To test this, I created a new file (new account hierarchy which includes
supplied asset and liability accounts) - put a couple of dummy asset entries
(deposit cash to wallet and to the checking account).
I then open the default Net Worth Linechart - it was empty (did not crash) so
then I went
First, what operating system and version are you using? Windows, MacOS,
Linux?
Newer versions of GnuCash will only work on newer versions of your
operating system.
From the main website:
"Version 2.6.21 is the last version for Windows XP/Vista and MacOS X
10.8 and earlier, and so the last v
Instead of going the desert route, ever tried Cumin and Cayenne on them?
That's great for sweet potato chips too.
Regards,
Adrien
On 12/19/23 9:35 AM, Kalpesh Patel wrote:
Honey Butter Cinnamon Sweet Potato Fries, please … two of them.
___
gnucash-
With the Customer Report open, click the Options button.
On the Display Columns tab, set Transaction Links to Simple or Detailed
as desired.
That will show which invoices are paid by which payments and which
payments apply to which invoices.
It isn't a list of *only* those unpaid, but it do
I've gotten it to crash for me in my VM. The stack trace says that it's
crashing several dozen frames into the javascript engine. Unfortunately the
MSYS build defaults to stripping the symbols so the trace doesn't tell me
anything more. I'm rebuilding WebKitGtk with stripping turned off, but tha
Paras,
The failure to install is probably down to the 5.4 problem of leaving the
gnucash process running. The xmlIOFTPClose entry point problem is strange. It's
optionally provided by libxml2 but MSYS-mingw doesn't build it in (neither does
the macOS build). It's (also optionally) consumed by l
Thanks a bunch for the attention to this!
In the meantime Windows users out there can grab the latest 5.4 version
here: https://code.gnucash.org/builds/win32/stable/
On Tue, Dec 19, 2023 at 4:43 PM John Ralls wrote:
> I've gotten it to crash for me in my VM. The stack trace says that it's
> cra
This just in: Somebody else has reported the xmlIOFTPClose message on
https://bugs.gnucash.org/show_bug.cgi?id=799170.
Regards,
John Ralls
> On Dec 19, 2023, at 14:05, John Ralls wrote:
>
> Paras,
>
> The failure to install is probably down to the 5.4 problem of leaving the
> gnucash proces
Perfect, thank you very much Adrien!
Changing the transaction links to "simple" works for what I am looking for.
If anyone wants this to persist, of course you can save a custom report or
leave tabs open all the time. What I did was just change the default. The
Customer Report is "new-owner-repor
I am also unable to change the SX status in the SLR dialog.
Using Linux (64 bit), Gnucash-5.5 built from source.
Also unable to enter a value for a place-holder in the SX. Double-click
on the placeholder, enter a value, press Enter and it reverts to "(Need
Value)". Release notes indicate a cha
Thanks for the tip on editing the report directly. I prefer something
other than 'none' so this will help greatly.
Regards,
Adrien
On 12/19/23 4:37 PM, Glenn Fowler wrote:
If anyone wants this to persist, of course you can save a custom report or
leave tabs open all the time. What I did was ju
I just opened bug # 799173 because GnuCash 5.5 is crashing.
I have an old old data file, lots of scheduled transactions, lots of
transactions. On upgrade to 5.5 today I was admiring the refinements to
Since Last Run, and noted in amongst all the scheduled transactions with
the "Reminder" status, t
34 matches
Mail list logo
