Re: [Gimp-user] Question on Layer Blending Modes

On Thu, May 19, 2011 at 8:39 AM, kevin gilbert wrote: > In the section "5.8 Practical Uses of Blending Modes" of the book "Grokking > the GIMP" (see, e.g., http://www.dig.cs.gc.cuny.edu/manuals/Gimp2/Grokking- > the-GIMP-v1.0/node57.html ) there is an example of how to use blending modes > to alte

[Gimp-user] Question on Layer Blending Modes

In the section "5.8 Practical Uses of Blending Modes" of the book "Grokking the GIMP" (see, e.g., http://www.dig.cs.gc.cuny.edu/manuals/Gimp2/Grokking- the-GIMP-v1.0/node57.html ) there is an example of how to use blending modes to alter the colour of a cat. Specifically, I refer to Figure 5.29(

[Gimp-user] Question about the rendering engine

I'm not a developer, so please don't slate me. I'm merely querying. I have six gigs of DDR3 RAM, an i7, and have allocated Gimp three gigs of RAM. My understand is that Gimp should run pretty smoothly. And it does. Except for when my file sizes increase. Let's say I'm working on an A3 page,

[Gimp-user] Question regarding guides

I am using Gimp version 2.6.8 on a Solaris SPARC system. I am able to drag guides in from the rulers, and Image->Guides->New Guides from Selection does work, immediately applying the four guides to the current selection. However, when I select Image->Guides->New Guide or Image->Gu

Re: [Gimp-user] question about hyperlinking

Am 22.11.2010 22:15, schrieb Li M. Terrell: > I am not a programmer and have basically taught myself gimp by trial and > error and what i can recall from Photoshop, so excuse me if this seems like > a dumb question. (I also use a wondows version of Gimp, but there is no > longer a windows forum, so

[Gimp-user] question about hyperlinking

I am not a programmer and have basically taught myself gimp by trial and error and what i can recall from Photoshop, so excuse me if this seems like a dumb question. (I also use a wondows version of Gimp, but there is no longer a windows forum, so here I am) ... Is GIMP made to have any kind of

Re: [Gimp-user] question

David, Since my interpretation of what you wrote > I have a picture jps file. I would like to make a circle and > then copy it and then paste it at various places onthe picture. What do > I have to do to accomplish this goal. is a bit different from what Saul answered, here's my answer: 1) Ope

Re: [Gimp-user] question

Quoting Healing Pathways : > Dear Tutorial, I have Gimp Image Manipulation Program Version 2.6. > on my computer. I have a picture jps file. I would like to make a > circle and then copy it and then paste it at various places onthe > picture. What do I have to do to accomplish this goal.

[Gimp-user] question

Dear Tutorial, I have Gimp Image Manipulation Program Version 2.6. on my computer. I have a picture jps file. I would like to make a circle and then copy it and then paste it at various places onthe picture. What do I have to do to accomplish this goal. Thanks very much. David Seltzer ___

[Gimp-user] Question about: Batch removal of date stamp from JPG in Gimp

Dear All, My wife has returned from holiday with 1,000 photographs on her new camera. Sadly, she left the date stamp on and each photograph in the bottom right hand corner has the date stamped there in coloured orange. Does anyone know any macros/ filters / effects/ batch jobs or other ideas

Re: [Gimp-user] Question: How to....

On Wednesday 28 January 2009, rlt46...@aol.com wrote: > I have Gimp 2.6. It says I need to "install the additional help package". > Where do I find the download? > > Rebecca Usually at the same place you found GIMP itself, which usually depends on your operating system. Daniel signature.asc

Re: [Gimp-user] Question: How to....

On Wed, Jan 28, 2009 at 3:04 PM, wrote: > I have Gimp 2.6. It says I need to "install the additional help package". > Where do I find the download? Wherever you downloaded the Gimp itself. :) If you installed a binary package, there should be a help package nearby. For Ubuntu Linux, "sudo apt

[Gimp-user] Question: How to....

I have Gimp 2.6. It says I need to "install the additional help package". Where do I find the download? Rebecca *~*~*~*~*~*~*~*~*~*~*~*~* "Belief" is compatible with respect and tolerance for other beliefs. "Certainty" is an arrogance that leads to intolerance, disrespect and, all too o

Re: [Gimp-user] Question about Gimp 2.6.1 on Ubuntu Linux

Martin Nordholts wrote: > Nathan Lane wrote: > >> On Wed, Nov 12, 2008 at 9:14 AM, Tom Williams <[EMAIL PROTECTED] >> > wrote: >> >> I'm running Gimp 2.6.1 on Ubuntu 8.10 (64-bit) and I've noticed when I >> load an image, the image window stays behind the toolbo

Re: [Gimp-user] Question about Gimp 2.6.1 on Ubuntu Linux

Nathan Lane wrote: > Go to Edit > Preferences, select Window Management, change the Hints > for the Toolbox and Docks to Normal Window. > > On Wed, Nov 12, 2008 at 9:14 AM, Tom Williams <[EMAIL PROTECTED] > > wrote: > > I'm running Gimp 2.6.1 on Ubuntu 8.10 (64-bit)

Re: [Gimp-user] Question about Gimp 2.6.1 on Ubuntu Linux

Nathan Lane wrote: > On Wed, Nov 12, 2008 at 9:14 AM, Tom Williams <[EMAIL PROTECTED] > > wrote: > > I'm running Gimp 2.6.1 on Ubuntu 8.10 (64-bit) and I've noticed when I > load an image, the image window stays behind the toolbox and the > layers > window

Re: [Gimp-user] Question about Gimp 2.6.1 on Ubuntu Linux

Go to Edit > Preferences, select Window Management, change the Hints for the Toolbox and Docks to Normal Window. On Wed, Nov 12, 2008 at 9:14 AM, Tom Williams <[EMAIL PROTECTED]> wrote: > I'm running Gimp 2.6.1 on Ubuntu 8.10 (64-bit) and I've noticed when I > load an image, the image window stay

[Gimp-user] Question about Gimp 2.6.1 on Ubuntu Linux

I'm running Gimp 2.6.1 on Ubuntu 8.10 (64-bit) and I've noticed when I load an image, the image window stays behind the toolbox and the layers window all the time. I didn't see a preference where I could control "always on top" behavior. This makes it challenging for me to work with images. I

Re: [Gimp-user] Question re. tool slider settings

John Coppens <[EMAIL PROTECTED]> writes: >On Thu, 3 Jan 2008 12:47:55 GMT >[EMAIL PROTECTED] (Jeffery Small) wrote: >> I get the following values: 0.0, 4.8, 9.6, 14.4, 19.2, 24.1, >> 28.9, etc. >Make the tool pane wider, and you'll get other values. The slider simply >subdivides the range int

Re: [Gimp-user] Question re. tool slider settings

On Thu, 3 Jan 2008 12:47:55 GMT [EMAIL PROTECTED] (Jeffery Small) wrote: > I get the following values: 0.0, 4.8, 9.6, 14.4, 19.2, 24.1, > 28.9, etc. Make the tool pane wider, and you'll get other values. The slider simply subdivides the range into the number of steps the slider can make. John

[Gimp-user] Question re. tool slider settings

This is just a general question regarding the values from the various tool sliders. As an example, when I drag the Threshold slider for the Fuzzy Select tool, I get the following values: 0.0, 4.8, 9.6, 14.4, 19.2, 24.1, 28.9, etc. Similar odd sequences of numbers appear for other tool options suc

Re: [Gimp-user] Question about keyboard shortcuts for brush selection

Sven Neumann <[EMAIL PROTECTED]> writes: >On Fri, 2007-11-23 at 05:52 +, Jeffery Small wrote: >> In gimp 2.2 I was able to set keyboard shortcuts for selecting "previous >> brush" and "next brush". I do not see these items listed in the keyboard >> shortcut menu for 2.4. Are these options st

Re: [Gimp-user] Question about keyboard shortcuts for brush selection

Hi, On Fri, 2007-11-23 at 05:52 +, Jeffery Small wrote: > In gimp 2.2 I was able to set keyboard shortcuts for selecting "previous > brush" and "next brush". I do not see these items listed in the keyboard > shortcut menu for 2.4. Are these options still available, and if so, > how are they

[Gimp-user] Question about keyboard shortcuts for brush selection

In gimp 2.2 I was able to set keyboard shortcuts for selecting "previous brush" and "next brush". I do not see these items listed in the keyboard shortcut menu for 2.4. Are these options still available, and if so, how are they set? Thanks. Regards, -- Jeffery Small __

Re: [Gimp-user] question

Hi, On Fri, 2007-11-16 at 15:44 +1030, David Gowers wrote: > The short answer is: The smudge tool uses a different painting > backend, and so the 'scale' setting did not take appropriate effect > (since changing brush size during smudging is not a very sensible > thing to be able to do, the smudg

Re: [Gimp-user] question

Hi Elwin, On Nov 16, 2007 1:04 PM, Elwin Estle <[EMAIL PROTECTED]> wrote: > I have been busy with other projects and haven't really had a chance to sit > down and play > with 2.4.1. It's pretty impressive. I do have one question. Why can't one > scale the > smudge tool? I am guessing that sm

[Gimp-user] question

I have been busy with other projects and haven't really had a chance to sit down and play with 2.4.1. It's pretty impressive. I do have one question. Why can't one scale the smudge tool? I am guessing that smudging complicates things too much, but I am still curious. ___

Re: [Gimp-user] Question about involuntary resizing

Simon, Maybe you can post a page for us to see the original, unedited, then the page where you see the resizing. I use ImageMagick and others use other programs to do auto-resizing (size, quality, etc) of uploaded images to ensure that they fit within the space intended. -Bob Simon Roberts w

[Gimp-user] Question about involuntary resizing

Hi all, I created a headshot for a friend, but the website she's posted it on, which is essentially out of her control, does some automatic resizing. Actually, I'm not sure if the resizing occurs in the server, or on the client browser. Anyway, the original image has been offered at a variety o

Re: [Gimp-user] Question about GIMP CMYK support.

On Tuesday 14 August 2007, John R. Culleton wrote: > On Tuesday 07 August 2007, Chris Mohler wrote: > > On 8/7/07, Bhavin Suthar <[EMAIL PROTECTED]> wrote: > > > Can someone tell me the truth behind this? Does this also mean > > > that if you write text on image (like your jpeg Canon photos) > > >

Re: [Gimp-user] Question about GIMP CMYK support.

On Tuesday 07 August 2007, Chris Mohler wrote: > On 8/7/07, Bhavin Suthar <[EMAIL PROTECTED]> wrote: > > Can someone tell me the truth behind this? Does this also mean > > that if you write text on image (like your jpeg Canon photos) > > then they can't be printed properly? > > Point #1 is almost a

Re: [Gimp-user] Question about GIMP CMYK support.

On Wednesday 08 August 2007 09:19, Owen wrote: > 2. Do you really need to make cmyk plates? Printing companies do, yes. Cheers; Leon -- http://cyberknights.com.au/ Modern tools; traditional dedication http://www.taslug.org.au/ Member, Tasmania Linux User Group http://slpwa.asn.au/

Re: [Gimp-user] Question about GIMP CMYK support.

Thanks all for your replies. From below answers I guess I am ok with sRGB and do not required CMYK seperation. -Bhavin On 8/7/07, Chris Mohler <[EMAIL PROTECTED]> wrote: > > On 8/7/07, Bhavin Suthar <[EMAIL PROTECTED]> wrote: > > > Can someone tell me the truth behind this? Does this also mean th

Re: [Gimp-user] Question about GIMP CMYK support.

On 8/7/07, Bhavin Suthar <[EMAIL PROTECTED]> wrote: > Can someone tell me the truth behind this? Does this also mean that if you > write text on image (like your jpeg Canon photos) then they can't be printed > properly? Point #1 is almost accurate. The true part: GIMP does not natively support C

Re: [Gimp-user] Question about GIMP CMYK support.

On Tue, 7 Aug 2007 16:39:00 -0400 "Bhavin Suthar" <[EMAIL PROTECTED]> wrote: > Hello All, > > I was evaluating GIMP and found below article about Adobe and GIMP > > http://www.labnol.org/internet/pictures/adobe-photoshop-vs-gimp-for-serious-photographers/920/ > > I was mainly concerned about be

[Gimp-user] Question about GIMP CMYK support.

Hello All, I was evaluating GIMP and found below article about Adobe and GIMP http://www.labnol.org/internet/pictures/adobe-photoshop-vs-gimp-for-serious-photographers/920/ I was mainly concerned about below statements === If you use Photoshop to create artwork for print, then you can forget a

Re: [Gimp-user] Question about saving jpeg images

gimp uses 85% quality as a default one for a jpeg image, it might be that your camera is using a 100% quality by default, try changing this setting (use the Save As option). the DPI is just a way of telling other application how big (in dimensions, not the filesize) the image really should be (afte

[Gimp-user] Question about saving jpeg images

I am using the 2.3.18 development version of gimp on a SPARC Solaris system, but I also see this with the 2.2.15 version as well. I have a 4MB jpeg file created with my Minolta 7D camera. I load it into Gimp and then immediately save it. The resulting file is now only 482kB in size! When I use

Re: [Gimp-user] question

On Friday 30 March 2007 16:40, Steven Howe wrote: > Thanks Manish; > next question, where is the list of 'gimp' calls? the pdb didn't > report this item. Under linux, In an ordinary terminal when I run > python and import gimp, and type (help gimp) the process terminates > with an error messgae. Is

Re: [Gimp-user] question

Thanks Manish; next question, where is the list of 'gimp' calls? the pdb didn't report this item. Under linux, In an ordinary terminal when I run python and import gimp, and type (help gimp) the process terminates with an error messgae. Is there a list of 'gimp' calls some where? Thanks Steven

Re: [Gimp-user] question

On Fri, Mar 30, 2007 at 12:10:15PM -0700, Steven Howe wrote: > pdb.gimp_get_image_list() > returns a list of ids, which are 32bit integers, not a list of images. I Use gimp.image_list() instead, which returns a list of Image objects. -Yosh ___ Gimp-use

[Gimp-user] question

pdb.gimp_get_image_list() returns a list of ids, which are 32bit integers, not a list of images. I know this as I tried in a pygimp console (with two images open): ( listLen, theList) = pdb.gimp_image_list() print listLen 2 print theList (3,2) for item in theList: prin

Re: [Gimp-user] Question

Sorry about the to copies - I forgor to hit 'reply-all'... Go to Image -> Mode and select RGB. My guess is that you're working in grayscale. It should (I think) say 'grayscale' or 'RGB' in the title bar of your image window. Let us know if that's it... Chris __

[Gimp-user] Question

This was sent last from my yahoo! account as hotmail gobbled it down and wouldn't let it send.  Maybe this time it will actually get where it's supposed to go.   I would like to know how to actually get and use colour with the GIMP when photo-editing or filling spaces in drawings, etc.  Plain, sim

Re: [Gimp-user] Question about Gimp2.2

On Tuesday 31 October 2006 09:07, Jude Sutton wrote: > I have downloaded and installed Gimp2.2 from an outside source. > > When I click on the desktop Icon, the program starts to intialize > but during that process it tells me there is No Disk in my CD drive. > > Is there a CD available? Where do I

[Gimp-user] Question about Gimp2.2

I have downloaded and installed Gimp2.2 from an outside source.   When I click on the desktop Icon, the program starts to intialize but during that process it tells me there is No Disk in my CD drive.   Is there a CD available? Where do I get that?   Jude Sutton ___

Re: [Gimp-user] Question about Gimp 2.4 and incorporation of the EXIF browser plugin

Sven Neumann wrote: Hi, On Sun, 2006-10-15 at 00:05 -0700, Tom Williams wrote: I see that Gimp 2.3.12 has just been released and I was wondering what are the chances of getting the EXIF browser plugin incorporated as a plugin that's part of the Gimp distribution? The plan was to fini

Re: [Gimp-user] Question about Gimp 2.4 and incorporation of the EXIF browser plugin

Hi, On Sun, 2006-10-15 at 00:05 -0700, Tom Williams wrote: > I see that Gimp 2.3.12 has just been released and I was wondering what > are the chances of getting the EXIF browser plugin incorporated as a > plugin that's part of the Gimp distribution? The plan was to finish the metadata plug-in f

Re: [Gimp-user] Question about TIFF error message

Hi, On Thu, 2006-10-12 at 13:14 -0400, [EMAIL PROTECTED] wrote: > I get the following error message when I bring a TIFF image into the > GIMP application: "TIFF IMAGE MESSAGE- unknown field with tag 34665 > (0x8769 encountered)". This TIFF image was converted from a RAW file > with the Fuji FineP

[Gimp-user] Question about Gimp 2.4 and incorporation of the EXIF browser plugin

I see that Gimp 2.3.12 has just been released and I was wondering what are the chances of getting the EXIF browser plugin incorporated as a plugin that's part of the Gimp distribution? EXIF browser: http://registry.gimp.org/plugin?id=4153 Thanks! Peace... Tom

Re: [Gimp-user] Question about TIFF error message

Carl Smith wrote: I get the following error message when I bring a TIFF image into the GIMP application: "TIFF IMAGE MESSAGE- unknown field with tag 34665 (0x8769 encountered)". This TIFF image was converted from a RAW file with the Fuji FinePix image converter. Can someone tell me what this

[Gimp-user] Question about TIFF error message

I get the following error message when I bring a TIFF image into the GIMP application: "TIFF IMAGE MESSAGE- unknown field with tag 34665 (0x8769 encountered)".  This TIFF image was converted from a RAW file with the Fuji FinePix image converter. Can someone tell me what this means and what I can d

Re: [Gimp-user] Question about Gimp 2.3.10 and "auto" level adjustment

Carol Spears wrote: On Sat, Aug 26, 2006 at 04:57:26PM -0700, Tom Williams wrote: Anywho, when I do an "auto" levels adjustment on the photo, the result looks quite a bit different and not as good as the original. I'm wondering if the result is actually correct or not. i do not kno

Re: [Gimp-user] Question about Gimp 2.3.10 and "auto" level adjustment

On Sat, Aug 26, 2006 at 04:57:26PM -0700, Tom Williams wrote: > Hi! I took a photo using a Canon PowerShot A75 while driving at approx > 65 mph. The shot came out ok and I didn't get into an accident. :) > very fun when there are no injuries or damage to vehicles :) > Anywho, when I do an "au

[Gimp-user] Question about Gimp 2.3.10 and "auto" level adjustment

Hi! I took a photo using a Canon PowerShot A75 while driving at approx 65 mph. The shot came out ok and I didn't get into an accident. :) Anywho, when I do an "auto" levels adjustment on the photo, the result looks quite a bit different and not as good as the original. I'm wondering if the

Re: [Gimp-user] Question about scripting

Hi, On Thu, 2006-07-13 at 08:47 -0500, Kent Tenney wrote: > Does that require writing c code or can it be scripted? It requires writing C code, but anyone can learn C in a day or two. Sven ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU

Re: [Gimp-user] Question about scripting

On 7/12/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: I am not following your use of "immutable" (it seems to contradict the statements in parentheses). Perhaps you could clarify that part. I mean that I do not want to make any changes to the image as it came from the camera/scanner, as doin

Re: [Gimp-user] Question about scripting

On 7/12/06, Sven Neumann <[EMAIL PROTECTED]> wrote: Hi, On Wed, 2006-07-12 at 08:43 -0500, Kent Tenney wrote: > A good start in this direction would be if I could automatically > save curves and levels files when applying these edits. I could > then script associating the color transforms with

Re: [Gimp-user] Question about scripting

Hi, On Wed, 2006-07-12 at 08:43 -0500, Kent Tenney wrote: > A good start in this direction would be if I could automatically > save curves and levels files when applying these edits. I could > then script associating the color transforms with the image. Feel free to contribute PDB functions that

Re: [Gimp-user] Question about scripting

On Wed, Jul 12, 2006 at 08:43:35AM -0500, Kent Tenney wrote: > > A good start in this direction would be if I could automatically > save curves and levels files when applying these edits. I could > then script associating the color transforms with the image. > > Questions: > Is it possible to scr

Re: [Gimp-user] Question about scripting

I am not following your use of "immutable" (it seems to contradict the statements in parentheses). Perhaps you could clarify that part. Also, I would caution that in GIMP parlance, the term "resize" generally refers to changing the canvas size of the image (without affecting the pixel data

[Gimp-user] Question about scripting

Howdy, I am interested in implementing a workflow capability to Gimp based on the following principles; - the original file is immutable. (any edits of it lose information) - the destination file is immutable. (assuming that lossy compression is used, (usually the case)) This implies that tha

Re: [Gimp-user] Question about Gtk-Perl and Gimp 2

Shlomi Fish wrote: On Saturday 06 May 2006 05:55, Tom Williams wrote: Hi! I'm installing Gimp 2.2.11 on my newly rebuilding Slackware Linux system and I've installed Gtk+ 2.8.17 but not Gtk 1.2.10. I tried to install Gtk-Perl via CPAN and the configuration of Gtk-Perl failed due to gtk-confi

Re: [Gimp-user] Question about Gtk-Perl and Gimp 2

On Saturday 06 May 2006 05:55, Tom Williams wrote: > Hi! I'm installing Gimp 2.2.11 on my newly rebuilding Slackware Linux > system and I've installed Gtk+ 2.8.17 but not Gtk 1.2.10. I tried to > install Gtk-Perl via CPAN and the configuration of Gtk-Perl failed due > to gtk-config not being found

[Gimp-user] Question about Gtk-Perl and Gimp 2

Hi! I'm installing Gimp 2.2.11 on my newly rebuilding Slackware Linux system and I've installed Gtk+ 2.8.17 but not Gtk 1.2.10. I tried to install Gtk-Perl via CPAN and the configuration of Gtk-Perl failed due to gtk-config not being found. Will Gtk-Perl be updated to work with GTK+ 2.x? Whe

Re: [Gimp-user] Question about Photo CD (.PCD) file suppor t in Gimp 2.2 or 2.4

> Von: Tom Williams <[EMAIL PROTECTED]> > What are my options for getting Photo CD image support in Gimp 2.2 or 2.4? The best approach would be to update one of the existing Photo CD plug-ins, for example http://registry.gimp.org/plugin?id=358 or http://registry.gimp.org/plugin?id=1285 The fir

[Gimp-user] Question about Photo CD (.PCD) file support in Gimp 2.2 or 2.4

Hi! I'm looking for a plugin to add support for Kodak Photo CD (.PCD) files and I'm not having any luck. What are my options for getting Photo CD image support in Gimp 2.2 or 2.4? Thanks! Peace... Tom ___ Gimp-user mailing list Gimp-user@lists.XCF.

[Gimp-user] question about gimp

I have a question. When I go to paint the pic it blends all together. Do you know how you can turn off blending? TYIA.   Jeri ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user

Re: [Gimp-user] Question Smart Erasing

Ctrl+K erases selection On Fri, 20 Jan 2006 02:39:57 +0200, Peter Diks <[EMAIL PROTECTED]> wrote: Hallo Gimp Users, I am using Gimp 2.2.9 on a dualboot duron 1200, 400 Mb, with Suse9.1 - WindowsME. I am looking for a way to erase a ( inverted ) selection with a tool like bucket-fill. I

[Gimp-user] Question Smart Erasing

Hallo Gimp Users,   I am using Gimp 2.2.9 on a dualboot duron 1200, 400 Mb, with Suse9.1 - WindowsME. I am looking for a way to erase a ( inverted ) selection with a tool like bucket-fill. I don't know how to use script-fu to program it.  I did split an short MPEG to frames, and made a selec

Re: [Gimp-user] Question about scaling digital photos for prints

JC Dill wrote: Tom Williams wrote: A friend of mine took a bunch of photos using her Vivitar 3.2MP digital camera with the camera set at 640x480 resolution. She wanted 4x6 prints of those and printed a bunch that came out looking all pixelated and basically like crap. Since then, we've set

Re: [Gimp-user] Question about scaling digital photos for prints

Steve Stavropoulos wrote: On 12/8/05, Tom Williams wrote: My question: is there anyway to use Gimp to scale the 640x480 images so they look as best as possible (no pixelation if possible) as 4x6 prints? You can look at http://www.greyc.ensicaen.fr/~dtschump/greycstoration/index.html and

Re: [Gimp-user] Question about scaling digital photos for prints

On 12/8/05, Tom Williams wrote: > My question: is there anyway to use Gimp to scale the 640x480 images so > they look as best as possible (no pixelation if possible) as 4x6 > prints? You can look at http://www.greyc.ensicaen.fr/~dtschump/greycstoration/index.html and use that program for resizin

Re: [Gimp-user] Question about scaling digital photos for prints

Tom Williams wrote: A friend of mine took a bunch of photos using her Vivitar 3.2MP digital camera with the camera set at 640x480 resolution. She wanted 4x6 prints of those and printed a bunch that came out looking all pixelated and basically like crap. Since then, we've set her camera back

Re: [Gimp-user] Question about scaling digital photos for prints

On Thu, Dec 08, 2005 at 07:50:15AM -0800, Tom Williams wrote: > A friend of mine took a bunch of photos using her Vivitar 3.2MP digital > camera with the camera set at 640x480 resolution. She wanted 4x6 prints > of those and printed a bunch that came out looking all pixelated and > basically li

[Gimp-user] Question about scaling digital photos for prints

A friend of mine took a bunch of photos using her Vivitar 3.2MP digital camera with the camera set at 640x480 resolution. She wanted 4x6 prints of those and printed a bunch that came out looking all pixelated and basically like crap. Since then, we've set her camera back to the max resolutio

Re: [Gimp-user] Question

On Thu, Sep 22, 2005 at 03:24:11AM +, Cody McLean wrote: > I was just wondering how I could change > some settings in the program. I would like to change a few of > the File Extensions so that certain graphics and such aren't opened in the > GIMP when I double click. I tried reinstalling the

Re: [Gimp-user] Question

Cody McLean wrote: > I was just wondering how I could change some settings in the > program. I would like to change a few of the File Extensions so that > certain graphics and such aren't opened in the GIMP when I double > click. I tried reinstalling the program to change these options > through t

[Gimp-user] Question

I was just wondering how I could change some settings in the program. I would like to change a few of the File Extensions so that certain graphics and such aren't opened in the GIMP when I double click. I tried reinstalling the program to change these options through there but they are all checked

Re: [Gimp-user] Question about the exif browser

Ok, I'll try re-building to see if that fixes it. Thanks! Peace... Tom falolaf wrote: I have EXIF browser working with the same Gimp version as you are on MandrivaLinux 2005LE. /Anders Tom Williams wrote: Hi! I'm running Gimp 2.2.8 on Linux and I just noticed the EXIF browser doesn't

Re: [Gimp-user] Question about the exif browser

I have EXIF browser working with the same Gimp version as you are on MandrivaLinux 2005LE. /Anders Tom Williams wrote: > Hi! I'm running Gimp 2.2.8 on Linux and I just noticed the EXIF browser > doesn't seem to be working. I've got an image that is known to have > EXIF data yet the EXIF browser

[Gimp-user] Question about the exif browser

Hi! I'm running Gimp 2.2.8 on Linux and I just noticed the EXIF browser doesn't seem to be working. I've got an image that is known to have EXIF data yet the EXIF browser reports there is none attached. Does the EXIF browser work for anyone else? Peace... Tom ___

Re: [Gimp-user] Question about using psd format.

Hi, Don Rozenberg <[EMAIL PROTECTED]> writes: > So I do my gimp thing and build an 8.5x11 inches image with a > resolution of 300 px/inch. I then store it as a psd file. > > However, when I open the psd in Photoshop 7, Photoshop declares that > the image is 35.4x45.8 inches with a resolution of 7

Re: [Gimp-user] Question about using psd format.

> I build my print images in gimp on my Knoppix box but have to send it to > my wife's apple where the color printer is attached. It seems logical > to use > Photoshop 7 to print the photo on the apple. So I do my gimp thing and > build an 8.5x11 inches image with a resolution of 300 px/inch. I th

[Gimp-user] Question about using psd format.

Hi, I am new to gimp and am running on Knoppix/Debian with Gimp 2.2.7. I build my print images in gimp on my Knoppix box but have to send it to my wife's apple where the color printer is attached. It seems logical to use Photoshop 7 to print the photo on the apple. So I do my gimp thing and b

[Gimp-user] Question about colors with GIMP Print...

Hi all...glad to see everybody. Well, as y'all know I am sure, sound and printing are the biggest choking points with Redhat Linux--the things that stop non-techies from using it and saying it's "too complicated". I'm not a techie but I've found folks in different forums to be very helpful in get

Re: [Gimp-user] Question about Flares in Gimp

Hello Tom! You can create your on and new flare and play with the values at the tab "Config". Also, you can play with light effects and improve yours flare. By now, I can´t help you properlly(I´m at college, so, no gimp...) sorry :( On Mon, 21 Feb 2005 20:39:05 -0800, Tom Williams <[EMAIL PR

[Gimp-user] Question about Flares in Gimp

Hi! Ok, I've used the GFlares that come with Gimp (I use Gimp 2.2.3 on Linux) and they're cool. I'm looking for some more "basic" flares, like the one in this image: http://www.missingimages.com/photoshopjokes/images/lens_flares.jpg or one like that in a "+" shape. Is it difficult to make fla

Re: [Gimp-user] Question about scaling images in Gimp 2.2.1

Carol Spears wrote: okay, i am responding to my own email, i read somewhere that this is not the best way to start your day or something. the discussion was on this list and the promise was that it would be fixed in the 2.2.2 release which was out yesterday. i guess i just wish that it be restored

Re: [Gimp-user] Question about scaling images in Gimp 2.2.1

On Mon, Jan 10, 2005 at 10:09:08AM -0800, Carol Spears wrote: > On Sun, Jan 09, 2005 at 11:35:46PM -0800, Tom Williams wrote: > > Ok, so I was trying to scale an image and I right-clicked and clicked > > "Image", then "Scale Image", and when the scale image dialog appears I > > changed the units

Re: [Gimp-user] Question about scaling images in Gimp 2.2.1

On Sun, Jan 09, 2005 at 11:35:46PM -0800, Tom Williams wrote: > Ok, so I was trying to scale an image and I right-clicked and clicked > "Image", then "Scale Image", and when the scale image dialog appears I > changed the units from pixels to percentage and the number changed from > pixels to som

[Gimp-user] Question about scaling images in Gimp 2.2.1

Ok, so I was trying to scale an image and I right-clicked and clicked "Image", then "Scale Image", and when the scale image dialog appears I changed the units from pixels to percentage and the number changed from pixels to some LARGE number (like over 2000). When I specify a percentage that I wa

Re: [Gimp-user] Question about save the line coordinates of the pencil or airbrush only

Hi. Use the Path Tool (and don't forget to open the Paths dialog to be able to deal weith it properly). Pinpoint your needed coordinates as nodes of a path, and them save that path to disk. It will be in SVG format (for gimp>=2.0 ) , but the coordinates can be read inside there. Regards,

[Gimp-user] Question about save the line coordinates of the pencil or airbrush only

Hi, All,   I just started to use GIMP to trace the boundary  of some objects on an image. I have used the (transparent) layer to (hand) draw the boundary so that I can save the traced boundary only.   I do have a question. I do not know how to save the traced boundary in a text file with t

[Gimp-user] Question about printing images

I'm running Gimp 2.0.4 on Linux with glib-2.4.6, gtk+-2.4.7, XFree86 4.4.0, and gimp-print 4.2.6. When I open an image (JPEG), it looks perfect. When I print it to my Epson Stylus Photo 700, the image prints ok but it has a red tint to it. Would this be a problem with gimp-print or Gimp? Th

Re: [Gimp-user] Question about settings colors with the Text Tool in gimp 2.0.4

On Sat, Aug 21, 2004 at 12:37:32PM -0700, Tom Williams wrote: > I'm running Gimp 2.0.4 on Linux and I've got an image with some colored > text loaded and I want to create a new image with different text with > the same color. So, here is what I do: > > 1. Load the image with the colored text >

Re: [Gimp-user] Question about settings colors with the Text Tool in gimp 2.0.4

Hi, Tom Williams <[EMAIL PROTECTED]> writes: > I'm running Gimp 2.0.4 on Linux and I've got an image with some > colored text loaded and I want to create a new image with different > text with the same color. So, here is what I do: > > 1. Load the image with the colored text > 2. Use the color

[Gimp-user] Question about settings colors with the Text Tool in gimp 2.0.4

I'm running Gimp 2.0.4 on Linux and I've got an image with some colored text loaded and I want to create a new image with different text with the same color. So, here is what I do: 1. Load the image with the colored text 2. Use the color chooser tool to choose the color of the text 3. Create a

Re: [Gimp-user] Question about Exif browser plug-in

David Neary wrote: Hi Tom, (snip) Alternatively, and perhaps simpler for a "normal" user, is to open the plug-in details plug-in (Xtns->Plugin details), and search for exif in the list view, then switch to the tree view to see where it is in the menu tree. Thanks for this info! I was able to

Re: [Gimp-user] Question about Exif browser plug-in

Jean-Luc Coulon (f5ibh) wrote: Le 23.05.2004 20:57:24, Tom Williams a écrit : Hi! I was installing various Gimp 2.0 plugins on Linux this morning and installed the Exif browser so I could check it out: http://registry.gimp.org/plugin?id=4153 I can't seem to find any information on how to actual

  1   2   >