Yea, with an athlon 2600+ it might not be worth it. But when every
CPU cycle is precious like it is for me, having that mpeg decoding
would be a plus. In the more general sense it may be of use if the
computer was of the silent fanless type and at a low clock speed. But
yes, if its a full power
Little update on what I said about the VIA mini-itx boards. Been
looking at them a little. Thie via EPIA SP, one of their newest
boards has a graphic processor with integrated MPEG-2 decoder and
MPEG-4 accelerator, not 100% sure what that is.
http://www.viaembedded.com/product/epia_sp_spec.jsp?mo
I have a inspiron 8200 with a radeon mobility 9000. I currently have
xorg 6.7.0-r3 installed. Last night I tried to upgrade to 6.8.
Because of blocking issues I had to unmerge xorg and remerge it.
Thank god for quickpkg. Once 6.8 was emerged I started x and things
were ugly. All sorts of corr
> I have a inspiron 8600 with a radeon mobility 9600 and use
> xorg-x11-6.8.2-r1 without corruption. It runs at 1920x1200. But there is
> no 3D graphic. Here are the relevant parts of my xorg.conf:
> Section "Module" # kdm does not start without this, even if empty
> SubSection "extmod" #
t;[EMAIL PROTECTED]> wrote:
> Lucien D. wrote:
>
> >>Section "ServerFlags"
> >>Option "off time" "4"
> >>EndSection
> >>
> >>
> >
> >I have nothing in ServerFlags. Whats this setting for? mon
xorgs log.
Almost there, any more suggestions would be great. I'll start digging
through forums at work tomorrow, right now I must go somewhere else,
the monitor is already giving me a headache.
I attached my new xorg.conf for ur viewing pleasure.
On 4/21/05, Lucien D. <[EMAIL PROTECT
Lucien
On 4/22/05, Richard Fish <[EMAIL PROTECTED]> wrote:
> Lucien D. wrote:
>
> >Ok, making progress. I installed 6.8.2-r1, did X -configure and its
> >working, well mostly. Two problems.
> >
> >well first, it seems like its running at a really high resolu
he
> audio and video look good. I cannot figure out yet how to tune
> channels from the command line so hopefully Myth will get that job
> done for me tomorrow.
>
> Take care and thanks,
> Mark
>
> On 4/22/05, Lucien D. <[EMAIL PROTECTED]> wrote:
> > no problem
Make sure the card is recognized in lspci, heres the output from mine
000:00:10.0 Multimedia video controller: Internext Compression Inc
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Flags: bus master, medium devsel, latency 64, IRQ
no problem, its nice to be able to answer questions occasionally
instead of just asking them.
On 4/22/05, Mark Knecht <[EMAIL PROTECTED]> wrote:
> On 4/22/05, Nick Rout <[EMAIL PROTECTED]> wrote:
> > On Fri, 2005-04-22 at 16:15 -0700, Mark Knecht wrote:
>
> > > Is that driver required before the
that netstat command should be enough, on my box I get this:
tv root # netstat -apn | grep 6543
tcp0 0 0.0.0.0:65430.0.0.0:*
LISTEN 6678/mythbackend
tcp0 0 127.0.0.1:6543 127.0.0.1:1115
ESTABLISHED 6678/mythbackend
tcp
I believe you have to have Load "extmod" in ur x config. Mine was
there automatically after X -config, but I'm pretty sure thats the
module u need for xvideo.
On 4/23/05, Mark Knecht <[EMAIL PROTECTED]> wrote:
> Hello again,
>
> SHORT FORM: What is 'Xv support' and how do I set it up? xvinfo say
ocate extmod | grep modules
> /usr/lib/modules/extensions/libextmod.a
> [EMAIL PROTECTED] ~ $ slocate extmod | grep lib
> /usr/lib/modules/extensions/libextmod.a
> [EMAIL PROTECTED] ~ $
>
> Do you happen to know where it might be in make menuconfig? Or is it
> by chance com
his morning. nuvinfo gives
> reasonable data but numexport wouldn't run for me. I wanted to convert
> the Myth recorded files to mpeg to see how they work.
>
> Take care,
> Mark
>
> On 4/24/05, Lucien D. <[EMAIL PROTECTED]> wrote:
> > Not a kernel module, i
STREAM CONNECTED 371642 31921/mythbackend
> unix 3 [ ] STREAM CONNECTED 371640 31921/mythbackend
> unix 3 [ ] STREAM CONNECTED 371638 31921/mythbackend
> dragonfly ~ #
>
> Should those IP addresses be all 0's
>
>
.
Lucien
On 4/25/05, Mark Knecht <[EMAIL PROTECTED]> wrote:
> On 4/24/05, Lucien D. <[EMAIL PROTECTED]> wrote:
> > >
> > This is just a guess, but it looks like that nuvinfo only looks at the
> > file information, which seem ok, but that nuvexport looks at the sql
Look at nuvexport, its in portage though masked. Its a frontend to
convert nuv files to various formats.
On 5/3/05, Nanayakkara, Pubudu <[EMAIL PROTECTED]> wrote:
> Anyone knows how to fix this?
>
> regards,
> Pubudu.
>
> --
> gentoo-user@gentoo.org mailing list
>
>
--
gentoo-user@gentoo.org
On 7/27/05, Justin Patrin <[EMAIL PROTECTED]> wrote:
> On 7/27/05, Alexander Skwar <[EMAIL PROTECTED]> wrote:
> > Hello.
> >
> > I finally bought myself a somewhat low end notebook on which I want
> > to install Gentoo as well. Since this is a "low end" box and since
> > my main system is not "low
On 7/29/05, Alexander Skwar <[EMAIL PROTECTED]> wrote:
> Lucien D. schrieb:
>
> > computer for that one. Whichever you choose there is plenty of
> > documentation for either.
>
> Care to point me to one you like especially well? :)
http://www.gentoo.org/doc/en/dis
phaedrus lu # cardmgr
cardmgr[10882]: no device drivers defined
cardmgr[10882]: no cards defined
cardmgr[10882]: no sockets found!
This is my problem, I've been troubleshooting it off and on for a
while now with no luck.
I'm running 2.6.11 gentoo-sources and version 3.2.8-r2 of pcmcia-cs.
Right
t; On Thursday 04 August 2005 09:17, Lucien D. wrote:
> > phaedrus lu # zgrep CONFIG_PCMCIA /proc/config.gz
> > # CONFIG_PCMCIA_DEBUG is not set
> > CONFIG_PCMCIA=y
> > CONFIG_PCMCIA_PROBE=y
> > # CONFIG_PCMCIA_AHA152X is not set
> > # CONFIG_PCMCIA_
I had the same problem recently, I solved it by manually downloading it
with wget, just do wget --no-check-certificate URL, then copy over to
/usr/portage/distfiles and rerun emerge command.
Lucien
On 17:29 Tue 15 Nov , James wrote:
> Hello
>
> I've been trying to emerge (install):
> media-
This problem has been irking me for some time now.
Whenever I try to build packages manually i.e. not emerge. They fail
when executing ./configure with the following error:
Invalid configuration `i686-pc-linux-': machine `i686-pc-linux' not
recognized
configure: error: /bin/sh ./config.sub i686-
23 matches
Mail list logo
