upgraded during the update wit relation to
sound is "media-sound:phonon" (4.3.50_pre20090520 -> 4.3.80-r1)
Any suggestions?
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
On Saturday 20 February 2010 18.57:20 Stroller wrote:
> On 20 Feb 2010, at 16:45, Dan Johansson wrote:
> > ...
> > If I start Amarok with the --debug flag I see the following output:
> > --8
> > <--
> on. Thanks.
And I have the exact opposite on one of my rigs. Viewing man pages as a normal
user and it get cluttered with ESC..., but view the same page after doing a
'sudo su -' everything is OK.
--
Dan Johansson, <http://www.dmj.nu>
*
3 /usr/portage/packages/sys-
apps/portage-2.1.7.17.tbz2 -> ../All/portage-2.1.7.17.tbz2
prod:
# ll /usr/portage/packages/sys-
apps/portage-2.1.7.17.tbz2._checksum_failure_.IJVYZY
-rw-r--r-- 1 root root 568929 Mar 5 17:53 /usr/portage/packages/sys-
apps/portage-2.1.7.17.tbz2._checksum_failure_.IJVYZY
What
the
monitors and the "Desktop effects" works great. And the other GUI's does not
give me that Xlkib error message. But now the only way to start a GUI on the
second Monitor is to prefix it with DISPLAY=:0.1 or use --display :0.1.
Does someone have any suggestion how I
Hallo,
Someone knows what's up with gentoo-wiki.com?
I get a "Connection to 207.98.216.138 Failed" and downforeveryoneorjustme.com
reports "It's not just you! http://gentoo-wiki.com looks down from here."
Regards,
--
Dan
On Friday 02 April 2010 16.50:56 erdun...@gmail.com wrote:
> On Fri, Apr 02, 2010 at 09:34:12AM -0500, Paul Hartman wrote:
> > On Fri, Apr 2, 2010 at 8:24 AM, Dan Johansson
wrote:
> > > Hallo,
> > >
> > > Someone knows what's up with gentoo-wiki.com?
&g
On Friday 02 April 2010 17.06:31 Dan Johansson wrote:
> On Friday 02 April 2010 16.50:56 erdun...@gmail.com wrote:
> > On Fri, Apr 02, 2010 at 09:34:12AM -0500, Paul Hartman wrote:
> > > On Fri, Apr 2, 2010 at 8:24 AM, Dan Johansson
>
> wrote:
> > > > Hallo,
ted
again after local. What would be the correct syntax for /etc/conf.d/net for
this setup (still at baselayout-1).
Regards,
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
split
(burst) a PDF, combine two or more PDFs, Rotate PDFs and so on)?
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
ut I can not figure out how to enable
this "flag" on host-B.
Suggestions?
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
On Saturday 12 June 2010 18.22:06 Daniel Pielmeier wrote:
> Dan Johansson schrieb am 12.06.2010 17:28:
> > I have two Gentoo Hosts that are (should be) 100% equal except on the
> > following points:
> > a) Hostname
> > b) IP
> > c) One Host has FEATURES="
card) in addition.
> How to access this internal SD card or how to debug the problem.
>
> Many thanks for a hint,
> Helmut.
Do you have the " Probe all LUNs on each SCSI device"
(CONFIG_SCSI_MULTI_LUN=y) kernel parameter set
[OT] Does anybody know if the "4 PORT SATA II RAID PCI-KARTE"
http://www.conrad.ch/goto.php?artikel=973451 works with (Gentoo-) Linux. On
the product description page it only lists Wintendo.
And if yes, which kernel driver?
--
Dan Johansson, <http
On Tue, September 22, 2009 09:52, Mike Kazantsev wrote:
> On Sun, 20 Sep 2009 14:44:54 +0200
> Dan Johansson wrote:
>
>> [OT] Does anybody know if the "4 PORT SATA II RAID PCI-KARTE"
>> http://www.conrad.ch/goto.php?artikel=973451 works with (Gentoo-)
>> Linu
following components:
keycodes: evdev+aliases(qwerty)
types: complete
compat: complete
symbols:pc+ch(de_nodeadkeys)+inet(evdev)
geometry: pc(pc104)
Error loading new keyboard description
Any suggestion on what could be wrong?
Regards,
--
Dan Johansson, <http://www.dmj
On Tuesday 13 October 2009 20.51:52 Dan Johansson wrote:
> After upgrading to KDE4 the other day my keyboard mapping stopped working.
> I traced it back to setxkbmap. Manually entering setxkbmap (with extra
> verbosity) gives the following:
>
> $ setxkbmap -model logicd -lay
ycode 133 (keysym 0xffeb, Super_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
8<-------
Any suggestions?
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
-8<------
I can not see why it works if I first deletes all USE flags (-*) and the just
sets the USE flags I need again.
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
On Thursday 29 October 2009 19.52:52 Dirk Heinrichs wrote:
> Am Donnerstag 29 Oktober 2009 19:39:27 schrieb Dan Johansson:
> > Today when I do an update world on one of my serves I get the following:
> >
> >
On Thursday 29 October 2009 20.16:24 Alan McKinnon wrote:
> On Thursday 29 October 2009 21:08:27 Dan Johansson wrote:
> > On Thursday 29 October 2009 19.52:52 Dirk Heinrichs wrote:
> > > Am Donnerstag 29 Oktober 2009 19:39:27 schrieb Dan Johansson:
> > > > Today when
In KDE3 I was having some of the sub-menus from the "Application Menu" direct
accessible from the Panel. I can not figure out how to do this in KDE4. I can
only add the complete Application Menu" to the Panel but not a sub-menu.
Any tips on how to solve this?
--
Dan J
.cgi?id=266678 but that did
not help.
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
On Sunday 31 January 2010 12.02:23 Helmut Jarausch wrote:
> On 30 Jan, Dan Johansson wrote:
> > As of lately my Firefox-bin (running on AMD64) does not find any of my
> > CUPS Printers, only "Print to File" and "LPR" are available for printing.
> > From
e old kernel again with
full functionality?
Regards,
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
pgpdAZT9lAn7Q.pgp
Description: PGP signature
On Thursday 19 May 2005 22.27, Zachary Medico wrote:
> --- Dan Johansson <[EMAIL PROTECTED]> wrote:
> > Hi,
> >
> > After I've done an upgrade of my kernel I have to
> > re-emerge some kernelmodules
> > (madwifi-driver among other). BUT when I do thi
On Saturday 21 May 2005 14.55, Jason Stubbs wrote:
> On Saturday 21 May 2005 21:48, Dan Johansson wrote:
> > On Thursday 19 May 2005 22.27, Zachary Medico wrote:
> > > --- Dan Johansson <[EMAIL PROTECTED]> wrote:
> > > > Hi,
> > > >
> >
On Saturday 21 May 2005 15.46, Jason Stubbs wrote:
> On Saturday 21 May 2005 22:08, Dan Johansson wrote:
> > On Saturday 21 May 2005 14.55, Jason Stubbs wrote:
> > > What portage version are using?
> >
> > My portage version is sys-apps/portage-2.0.51.19 on x86.
>
On Saturday 21 May 2005 18.04, Dan Johansson wrote:
> On Saturday 21 May 2005 15.46, Jason Stubbs wrote:
> > On Saturday 21 May 2005 22:08, Dan Johansson wrote:
> > > On Saturday 21 May 2005 14.55, Jason Stubbs wrote:
> > > > What portage version are using?
> &g
I'm having some problems with deadkeys in OO. In every other application the
deadkeys works fine (like Kmail) to enter chars like åäö. But in OO nothing
happens when i try to enter a special char (¨ + a to create a ä).
Any suggestions on what could be the problem.
Regards,
--
Dan Joha
re/lib/i386/classic:
+ export LD_LIBRARY_PATH
+ for LIBASPELL_DIR in /usr/local/lib /opkg/lib
+ test -f /usr/local/lib/libaspell.so.15
+ for LIBASPELL_DIR in /usr/local/lib /opkg/lib
+ test -f /opkg/lib/libaspell.so.15
++ cat /home/da
On Friday 17 June 2005 13.36, Dan Johansson wrote:
> Hi,
>
> After upgrading from Opera 8.00 to 8.01 it won't start any more.
> While trying to start I'm getting a "Segmentation fault"
> from /opt/opera/lib/opera/8.01-20050615.5/opera.
>
> Any suggestions
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
While doing an "emerge --update --deep --verbose world" today it fails
while compiling kdenetwork. Here are the last few lines from the compile
run:
i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/kde/3.3/include
- -I/usr/qt/3/include
On Monday 20 June 2005 20.58, Zac Medico wrote:
> Dan Johansson wrote:
> > While doing an "emerge --update --deep --verbose world" today it fails
> > while compiling kdenetwork. Here are the last few lines from the compile
> > run:
>
> What version of net-wi
On Monday 20 June 2005 22.26, Dan Johansson wrote:
> On Monday 20 June 2005 20.58, Zac Medico wrote:
> > Dan Johansson wrote:
> > > While doing an "emerge --update --deep --verbose world" today it fails
> > > while compiling kdenetwork. Here are the last
led BEFORE
"/etc/init.d/netmount stop" which causes "netmount stop" to just hang as it
has no network connection any more and I have to turn of the computer "by
hand". Anny suggestions on what could have gone wrong?
Regard
On Friday 24 June 2005 16.49, Richard Fish wrote:
> Dan Johansson wrote:
> >Hi,
> >
> >After upgrading the baselayout I have a strange problem when I shutdown my
> >computer. While shutting down some of the /etc/init.d scripts gets
> > executed in the wrong order -
tage
Any suggestions?
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
signature.asc
Description: This is a digitally signed message part.
is why emerge is trying to emerge ssmtp. I see that
gnupg-2.0.7-r1 has a RDEPEND on virtual/mta which courier and ssmtp PROVIDE.
Can someone share som light why emerge doesn't use the PROVIDE="virtual/mta
virtual/mda virtual/
On Friday 21 March 2008, Neil Bothwick wrote:
> On Fri, 21 Mar 2008 16:18:31 +0100, Dan Johansson wrote:
> > [ebuild N] mail-mta/courier-0.58.0 USE="crypt fam ldap nls
> > nowebadmin nowebmail -fax -ipv6 -mailwrapper -mysql -norewrite -pam
> > -postgres -spell&qu
low this cache to make direct
connections to origin servers, and
* All configured parent caches are currently unreachable.
Your cache administrator is root.
Generated Sat, 26 Apr 2008 09:53:00 GMT by none (squid/3.0.STABLE1)
-8<------
interface being used
--8<
Before the change of profile the output was clean.
Any suggestions?
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
**
file.
>
> Any suggestions on how to solve this problem? Kind of urgent cause I
> need to finish my job-application...
I had the same problem. The fix in bug
http://bugs.gentoo.org/show_bug.cgi?id=264510 solved it for me.
Regards,
--
Dan Johansson, <http://www.dmj.nu>
v a1)
05:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400 GS]
(rev a1)
Any suggestions on how to solve this?
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
smime.p7s
Description: S/MIME cryptographic signature
Is there someone out there in Gentoo-land that is using OFS
(http://offlinefs.sourceforge.net/wiki/doku.php). If yes did find a ebuild
for it in some overlay or did you just download the src and compile?
Regards,
--
Dan Johansson, <http://www.dmj
ed?
>
> I'm not seeing a ps2pdf package to emerge. Does it go by another name?
# equery b $(which ps2pdf)
[ Searching for file(s) /usr/bin/ps2pdf in *... ]
app-text/ghostscript-esp-8.15.3 (/usr/bin/ps2pdf)
--
Dan Johansson, <http://www.dmj.nu>
**
genericups'
Could you please try to explain whats wrong?
Regards,
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
signature.asc
Description: This is a digitally signed message part.
same URL as the old one.
Still a no-go :-(
I put in some dubugging lines (three print-lines), and the result is that the
first time the program reaches the following program segment (line 118 ansd
119) everything works (no error).
packages.setdefault(packagename,Package(packagename))
can select an active
configuration:
/sys/bus/usb/devices/2-1# echo 1 > bConfigurationValue
/sys/bus/usb/devices/2-1# cat bConfigurationValue
1
After this the device works as expected.
--
Dan Johansson, <http://www.dmj.nu>
***
This message is print
On Sunday 09 September 2007, Dan Johansson wrote:
> After upgrading to 2.6.22 one of my USB-devices stopped working "out of the
> box". I've found a workaround (see below) to get it working. And my
> question is how can I make this automatically?
>
> Here's the
I've tried to restore a backup from before the reboot - but I still have the
same problem. Any suggestions on what to do to solve this?
--
Dan Johansson, <http://www.dmj.nu>
***
This message is
On Tuesday 25 September 2007, Naga wrote:
> On Tuesday 25 September 2007 09:34:58 Mick wrote:
> > On Sunday 23 September 2007, Dan Johansson wrote:
> > > Today I rebooted one of my servers and now slapd won't start (it's been
> > > running OK until this re
g00/lvol05/home/ulle 4GB
/dev/vg00/lvol06/tmp1GB
/dev/vg00/lvol07/var/vmware/WinXP 28GB
/dev/vg00/lvol08/usr/portage3GB
The main reason for me for using LVM is that I can easily extend a filesystem
on th
#x27;s Partition type (it works OK on a Wintendo
box). Someone know which partition type an iPod Nano uses?
Regards,
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 1
t;
>
>
> Any ideas? The /etc/conf.d/net file is very basic. All is has is
> config_eth1=("dhcp") then the wireless stuff. I could get eth1 to work
> if I manually assigned an address, but now that doesn't work either.
> Any help is appreciated.
You're sure
I'm having a small problem with spell checking in kmail (v. 1.9.7, KDE 3.5.8).
e.g. if a have the word beigefügte in a text, the spellchecker will treat it
as two words, beigef and gte, which of course is not in the dictionary.
Any suggestions how to solve this?
--
Dan Johansson,
On Monday 19 May 2008, Peter Ruskin wrote:
> On Sunday 18 May 2008, Dan Johansson wrote:
> > I'm having a small problem with spell checking in kmail (v.
> > 1.9.7, KDE 3.5.8). e.g. if a have the word beigefügte in a text,
> > the spellchecker will treat it as two words,
ick libwww mailwrapper mbox mcal mime mmap mmx motif mpi mysql nis
> nsplugin odbc offensive openal oscar pic posix postgres ppds ruby samba
> snmp sockets sse ssl svga symlink sysvipc tetex usb xpm xulrunner yahoo
> -firefox -seamonkey"
Is all this on o
iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24 &
up echo 1 > /proc/sys/net/ipv4/ip_forward &
up iptables -P FORWARD ACCEPT &
down iptables -D POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
What would be the corresponding file(s) on Gentoo?
Regards,
--
Dan J
On Saturday 06 September 2008, Daniel Pielmeier wrote:
> Hong Hao schrieb am 06.09.2008 15:29:
> > Dan Johansson wrote:
> >> I have bought me a new toy - an Openmoko Freerunner.
> >> Each time I connect it to my Gentoo-box I must configure the usb0
> >>
On Saturday 06 September 2008, Dan Johansson wrote:
> On Saturday 06 September 2008, Daniel Pielmeier wrote:
> > Hong Hao schrieb am 06.09.2008 15:29:
> > > Dan Johansson wrote:
> > >> I have bought me a new toy - an Openmoko Freerunner.
> > >> Each
On Sunday 07 September 2008, Remy Blank wrote:
> Dan Johansson wrote:
> > The above worked like a charm on my desktop but on my notebook it fails
> > to autoaticly bring up the usb0 interface. If I do '/etc/init.d/net.usb0
> > start' on the notebook everything works
are other ways round that problem ...
>
> What's the difference between system D-BUS (rc-update thingy) and session
> D_BUS (script in .kde/env)? I'm afraid the wiki doesn't explain it
> adequately for my humble needs.
Sorry, but I dont know - it just started to work a
same errormessage when it try it by hand. I've reemerged my
iptables (net-firewall/iptables-1.3.5-r4
USE="-extensions -imq -ipv6 -l7filter -static") but that did not help.
Any suggestions?
--
Dan Johansson, <http://www.dmj.nu>
**
On Saturday 21 April 2007 15:53, Uwe Thiem wrote:
> On 21 April 2007, Dan Johansson wrote:
> > After upgrading gentoo-sources to 2.6.20-r6 from 2.6.19-r5 today my
> > firewall won't start (shorewall).
> >
> > The here's the error:
> > iptables: In
On Saturday 21 April 2007 20:34, Mark Shields wrote:
> On 4/21/07, Dan Johansson <[EMAIL PROTECTED]> wrote:
> > On Saturday 21 April 2007 15:53, Uwe Thiem wrote:
> > > On 21 April 2007, Dan Johansson wrote:
> > > > After upgrading gentoo-sources
ups for hosts in the company network, I can still
connect to the hosts using IP.
Any suggestions on how to make dhcpcd not to override the resolv.conf from the
cisco-vpn-client?
Regards,
--
Dan Johansson, <http://www.dmj.nu>
***
This message i
On Thursday 17 May 2007 16:37, Dan Farrell wrote:
> On Thu, 17 May 2007 16:08:00 +0200
>
> Dan Johansson <[EMAIL PROTECTED]> wrote:
> > I'm having some trouble with dhcpcd and CiscoVPN. This is what I do
> > and what's happening.
> >
> > Compu
This should manage the resolv.conf dynamically and merge information about
> different nameservers for different networks. Works fine for me with the
> very same situation.
Sorry for the late Answer - I was over in the States last week.
Thanks
g-utils --verbose --pretend I get
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild U ] x11-misc/icon-naming-utils-0.8.2 [0.8.1] 65 kB
Why does not --update world include this package?
Regards,
--
On Wednesday 20 June 2007 20:23, Neil Bothwick wrote:
> On Wed, 20 Jun 2007 19:20:49 +0200, Dan Johansson wrote:
> > If I do an emerge x11-misc/icon-naming-utils --verbose --pretend I get
> > These are the packages that would be merged, in order:
> >
> > Calcu
On Thursday 21 June 2007 19:24, Bo Ørsted Andresen wrote:
> On Thursday 21 June 2007 19:18:15 Dan Johansson wrote:
> > > > If I do an emerge x11-misc/icon-naming-utils --verbose --pretend I
> > > > get These are the packages that would be merged, in order:
> > >
choose (which is more "up to date"). I am mainly
using NFSv4.
Regards,
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
dcast 192.168.1.255
ether 00:18:de:e1:c9:71 txqueuelen 1000 (Ethernet)
RX packets 128 bytes 21081 (20.5 KiB)
RX errors 0 dropped 20 overruns 0 frame 0
TX packets 143 bytes 24546 (23.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
An
On Sunday 26 February 2012 10.52:58 Willie WY Wong wrote:
> On Sun, Feb 26, 2012 at 11:34:01AM +0200, Penguin Lover Alan McKinnon
> squawked:
> > On Sun, 26 Feb 2012 10:19:56 +0100
> > Dan Johansson wrote:
> > > After running an update yesterday (about 50 packages) on
ntly the culprit is /etc/init.d/netmount
> I am not sure how it got into the default run level, since I don't use
> any network file systems on my netbook.
And on my laptop the culprit seems to be /etc/init.d/sshd
--
Dan Johansson, <http://www.dmj.nu>
**
On Sunday 26 February 2012 17.52:13 Dan Johansson wrote:
> On Sunday 26 February 2012 15.19:54 Willie WY Wong wrote:
> > On Sun, Feb 26, 2012 at 10:35:35AM +0100, Penguin Lover Willie WY Wong
> > squawked:
> > > Can someone help me figure out how to find the offending i
On Sunday 26 February 2012 13.43:13 Dan Johansson wrote:
> On Sunday 26 February 2012 10.52:58 Willie WY Wong wrote:
> > On Sun, Feb 26, 2012 at 11:34:01AM +0200, Penguin Lover Alan McKinnon
> > squawked:
> > > On Sun, 26 Feb 2012 10:19:56 +0100
> > > Dan Johans
I still want to be able to boot it.
When these two "issues" are solved I'm going to let my system update udev.
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
ectrons!
***
On Thursday 05 April 2012 00.36:33 Neil Bothwick wrote:
> On Wed, 04 Apr 2012 18:58:38 +0200, Dan Johansson wrote:
>
> > I have a similar thing on my ~x86, but the difference is that I know
> > why I get it. I have su
ow more
> reversability?
>
> Have I left out any steps, between 6 and 7 or anywhere else?
I have done also something like this.
I still have /usr in fstab (with the noauto option) just for reference.
The only thing (that I have noticed yet) is that the /etc/init.d/lvm fails due
to the fac
new terminal emulator
with tabs that work like I want it).
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
On Saturday 14 April 2012 12.01:13 Dan Johansson wrote:
> Yesterday I did the upgrade of KDE (4.7.4 -> 4.8.1) on my "stable"
> workstation.
> Now the "new tab button" in Konsole opens a new tab with the _default_
> profile instead of opeing a new tab wit
eq
Any suggestion short of reverting to 2.4.23?
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
On Sunday 20 February 2011 13.25:31 Dan Johansson wrote:
> Today after updating openldap from 2.4.23 to 2.4.24, slapd will not start.
>
> # /etc/init.d/slapd start
> * Starting
I know this is Off-topic but I also know there are a lot of smart people
"lurking" on this list.
I have a PHP-script that does not run from a web-server but directly in a
shell. When I run it I get the following error:
# ./dj.php
PHP Fatal error: Allowed memory size of 100663296 bytes exhauste
On Thursday 14 April 2011 03.12:34 Michael Orlitzky wrote:
> On 04/13/2011 02:42 PM, Dan Johansson wrote:
> > I know this is Off-topic but I also know there are a lot of smart people
> > "lurking" on this list.
> >
> > I have a PHP-script that does not ru
t;> Is there something like that in Gentoo?
> >
> > app-admin/lib_users
And do not forget app-admin/checkrestart
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
sson
torsson.dmj.nu:/Queen/tmp on /home/dan/tmp_torsson type nfs4
(rw,proto=tcp,soft,intr,addr=192.168.1.3,clientaddr=192.168.1.11)
Any idea why the diskless client can not mount it's root-FS?
Regards,
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
t the web-sites open-iscsi seems dead, last update of web-site
2005 and latest release from July 2009.
iscsitarget does not look much better - latest release July 2010.
So, what are you using and are you happy with it?
Regards,
--
Dan Johansson, <http:
it.
Regards,
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
with only the 'ATTR{dev}=191:...' rule)
And if I change the order in the rules-file:
/dev/capi20 191,31
Can some udev-crack (or someone else) tell my what I am doing wrong?
Regards,
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
On Sunday 21 August 2011 20.26:40 Dan Johansson wrote:
> Hi,
>
> I need some help with writing udev-rules for capi.
> After playing around some I decided to ask for help here as can't really
> get it to work.
>
> What I want ist the following:
> /dev/capi20
xlibs-20110129::gentoo, installed)
-8<
What would be the correct way to resolve this issue?
I am a little bit afraid to start unmerging any of these packages as among
other things sys-boot/grub depends on some of them.
Regards,
--
Dan Johansson, <http://
-On Saturday 03 September 2011 12.31:01 Mick wrote:
> On Saturday 03 Sep 2011 10:17:19 Dan Johansson wrote:
> > Since some time I am getting the following errors while doing update
> > world on my dektop machine (running amd64 stable):
> > -
e a MAJOR issue if /usr needs to be on /.
Just my 2 cents.
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
le googling for a solution I found a workaround: Use the "ioctl" backend
instead of the "external" backend.
For me this workaround works.
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
; or press +. I have not set any
special parameters for these skipped folders. All my messages and folders
reside on a local IMAP-server (courier).
Any suggestion why some folders are skipped and where to look for a solution.
Regards,
--
Dan Johansson
o penguin) are
the fastest underwater swimming penguins, reaching speeds of 36 km/h. Gentoo
are adapted to very harsh cold climates."
--
Dan Johansson, <http://www.dmj.nu>
***
This message is printed on 100% recycled electrons!
***
ase-meta:4.5[-kdeprefix] ("kde-base/kdebase-
meta:4.5[-kdeprefix]" is blocking kde-base/kdebase-meta-4.4.5)
[blocks b ] kde-base/kdebase-meta:4.4[-kdeprefix] ("kde-base/kdebase-
meta:4.4[-kdeprefix]" is blocking kde-base/kdebase-meta-4.5.1)
Any suggestion on what I have
1 - 100 of 249 matches
Mail list logo
