> I cannot solve your problem because I know little of X and nothing
> about compiz (which I consider futile), but for this kind of problem,
> you may want to know about the magic SysRq key. It allows you to at
> least reboot your system cleanly when the system seems locked, and
> some times can ev
On 3/2/07, Daniel Iliev <[EMAIL PROTECTED]> wrote:
CapSel wrote:
> On 3/1/07, *Boyd Stephen Smith Jr.* <[EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>> wrote:
>
> That would be correct, since every forwarded packet passes though
> both the
> pre
On 3/1/07, Boyd Stephen Smith Jr. <[EMAIL PROTECTED]> wrote:
That would be correct, since every forwarded packet passes though both the
pre-routing and post-routing chains, so you are counting every packet (at
least those that are not dropped in the FORWARD chain) twice.
I don't fully underst
Values taken from ifconfig shows same values as my firewall :)
Why
On 3/1/07, CapSel <[EMAIL PROTECTED]> wrote:
I'm trying to count bandwidth and number of packets on my router with
rules like:
iptables -t mangle -A PREROUTING -i eth0 -j stats
iptables -t mangle -A POSTROUTING
I'm trying to count bandwidth and number of packets on my router with rules
like:
iptables -t mangle -A PREROUTING -i eth0 -j stats
iptables -t mangle -A POSTROUTING -o eth0 -j stats
iptables -t mangle -A stats -p tcp -s $ip -j ACCEPT
iptables -t mangle -A stats -p udp -s $ip -j ACCEPT
iptables
If it isn't luck it seems that some part of portage coused this error.
I untared wine tarball from distfiles and I've done everything
according to README inside. It compiled successfully. How can I check
what part of portage couse this?
On 1/9/07, CapSel <[EMAIL PROTECTED]> wro
e can couse these errors?
On 1/8/07, Richard Fish <[EMAIL PROTECTED]> wrote:
On 1/7/07, CapSel <[EMAIL PROTECTED]> wrote:
> ... what else can I do?
I don't see anything obviously wrong. It looks like the problem
appears when autoconf/automake are run to generate the Makefiles.
S
lcms -ldap
-nas -scanner -xml" 0 kB
Total size of downloads: 0 kB
#
... what else can I do?
On 1/7/07, Richard Fish <[EMAIL PROTECTED]> wrote:
On 1/7/07, CapSel <[EMAIL PROTECTED]> wrote:
> What is going on? How can I compile wine and solve this problem? I'm
> running
What is going on? How can I compile wine and solve this problem? I'm
running out of ideas.
Whenever I try to emerge wine for my laptop I get error similar to this:
make[2]: Leaving directory
`/var/tmp/portage/wine-0.9.22/work/wine-0.9.22/dlls/oleacc'
make[2]: Entering directory
`/var/tmp/portage/
What is going on? How can I compile wine and solve this problem? I'm
running out of ideas.
Whenever I try to emerge wine for my laptop I get error similar to this:
make[2]: Leaving directory
`/var/tmp/portage/wine-0.9.22/work/wine-0.9.22/dlls/oleacc'
make[2]: Entering directory
`/var/tmp/portage/
I'm getting this kind of error with wine 0.9.25 and 0.9.27. On .25 it
is on same directory, and on .27 on different. My friend _compiled_
wine with same USE flags, but he has pre 4.1 gcc.
I can't find on google similar bug with wine, but there were same
errors in other projects but soloved by re-u
I use reiserfs (version 3.x, if correctly recall 3.6), haven't even touched reiser4(resierfs 4.X).On 10/28/06, Hemmann, Volker Armin <
[EMAIL PROTECTED]> wrote:On Saturday 28 October 2006 19:16, CapSel wrote:
> I wrote five because I started to count 5 times ago. My RAM is in g
It's now more than five times when reiserfs has "sucked my data into
/dev/null". At the begining I thout that was a hardware problem -
disk, ram... but now I am almost 100% sure that reiserfs IS NOT stable
file system. It doesn't matter if I have gentoo-sources or
hardened-sources, if I compile fo
My server crashed twice with same Oops info. It runs apache,mysql,nfs
(client only), it has more than 2GB swap partition (does not use it
very much), 2GB ram, disk is Raptor on SATA...
I have two clones of this machine (computers with same parts, system
is copied by RSYNC) and only one of them has
On 6/19/06, fei huang <[EMAIL PROTECTED]> wrote:
This mail is written in Chinese, yes, I'm sure, for I am a Chinese..
besides, please click the report spam button to get rid of it.
regards
daniel
On 6/18/06, CapSel <[EMAIL PROTECTED]> wrote:
>
I don
I don't speak japanese at all :)
-- Forwarded message --
From: 深圳物资集团有限公司 <[EMAIL PROTECTED]>
Date: Jun 18, 2006 12:48 AM
Subject: 深圳物资集团有限公司
To: [EMAIL PROTECTED]
致贵公司财务经理收:
本公司为广东省深圳物资集团有限公司.本着为双方公司利益的出发点，可向外代开（增值税发票）
（普通商品销售发票）（服务发票）（运输专用发票），代开手续费请来电与我公司负责人详谈。
贵公司在进出项或做帐
I've found that I can scroll down page with floating flash animation
beyond page's end.
For example on http://serwisy.gazeta.pl/nauka/0,0.html
If a yellow one starts moving then scroll down :)
Is it a bug? Can this be dangerous for firefox?
--
gentoo-user@gentoo.org mailing list
On 5/25/06, Raymond Lewis Rebbeck <[EMAIL PROTECTED]> wrote:
smartmontools does in fact support SATA disks starting with kernel 2.6.15.
Use the '-d ata' argument with SATA disks and it will work fine.
For example: # smartmontools -d ata -a /dev/sda
--
Raymond Lewis Rebbeck
--
gentoo-user@gent
On 5/25/06, Jarry <[EMAIL PROTECTED]> wrote:
> Unfortunately smartmontools does not support SATA disks.
More exactly:
"Smartmontools should work correctly with SATA drives under both
Linux 2.4 and 2.6 kernels, if you use the standard IDE drivers
in drivers/ide. If you use the new libata drivers
On 5/25/06, Ryan Tandy <[EMAIL PROTECTED]> wrote:
Make a backup. Now.
When you start seeing 'end_request: I/O error', it's always (in my
experience) been a sign of a disk getting ready to pack it in.
Double check physical connections, make sure no wires are loose; if
S.M.A.R.T. is available,
Hi all,
I have sata disk sda connected to ICH7 (ata_piix). Everything worked
fine until I saw these error messages:
May 24 23:31:43 foo ata1: command 0x35 timeout, stat 0xd1 host_stat 0x21
May 24 23:31:43 foo ata1: translated ATA stat/err 0xd1/00 to SCSI
SK/ASC/ASCQ 0xb/47/00
May 24 23:31:43 foo a
On 4/6/06, Richard Fish <[EMAIL PROTECTED]> wrote:
> On 4/6/06, CapSel <[EMAIL PROTECTED]> wrote:
> > ...and it's happening again...
> > I inserrted DisplaySize in Monitor section with size in milimeters as
> > it was in man xorg.conf.
>
> The one oth
On 4/6/06, CapSel <[EMAIL PROTECTED]> wrote:
> On 4/6/06, Richard Fish <[EMAIL PROTECTED]> wrote:
> > On 4/6/06, CapSel <[EMAIL PROTECTED]> wrote:
> > > I don't know how it is possible but when I connected a monitor to my
> > > laptop, after restar
On 4/6/06, Richard Fish <[EMAIL PROTECTED]> wrote:
> On 4/6/06, CapSel <[EMAIL PROTECTED]> wrote:
> > I don't know how it is possible but when I connected a monitor to my
> > laptop, after restart, every font was about 2px bigger and the problem
> > wa
On 4/3/06, Richard Fish <[EMAIL PROTECTED]> wrote:
> On 4/3/06, CapSel <[EMAIL PROTECTED]> wrote:
> > Yes, I tried... but it's not a solution. :(
> > Can anyone tell me how to check what is causing this?
>
> I've seen this beforebut I also can't
On 4/4/06, Christoph Eckert <[EMAIL PROTECTED]> wrote:
>
> > Can someone help me?
>
> AFAIR Firefox 1.5 supports SVG, but only a subset of the complete
> specification. I thinks that's why animations do not appear.
>
> I also created some "simple" static SVGs, but Firefoy does not display
> hatches
I wanted to make some animations not using flash so I founded svg, but
firefox 1.0.7 does not support it. I emerged adobesvg and:
1. firefox 1.0.7 (-bin) after changeing from page with svg to other
crashes all open windows. After right-click I can see menu of
adobesvg; without adobesvg it prompts f
On 4/3/06, Rafael Bugajewski <[EMAIL PROTECTED]> wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Am 02.04.2006 um 00:09 schrieb CapSel:
>
> > When I open a page and scroll it I see something like someone cuted or
> > added one row of pixels. I not
When I open a page and scroll it I see something like someone cuted or
added one row of pixels. I noticed it right after upgrading gtk+ froem
2.8.8 to 2.8.12, but I don't know if it is gtk problem. There are no
any errors/warnings.
Any idea of how to fix it?
--
gentoo-user@gentoo.org mailing list
c detected *** free(): invalid pointer: 0x08958250 ***
Przerwane
(afaik "przerwane" = "segmentation fault")
After this I have ~/.inkscape/ with file preferences.xml, and the next error is:
[EMAIL PROTECTED] ~ $ inkscape
/home/capsel/.inkscape/preferences.xml:2: parser error :
On 2/13/06, Holly Bostick <[EMAIL PROTECTED]> wrote:
> John Jolet schreef:
> >
> >> Ummm... isn't there supposed to be a system.map for the kernel as
> >> well?
> >>
> >> I myself don't manually copy my kernels after compiling it; I use
> >> make install to do so, and I have the following files in
On 2/11/06, Robert Cernansky <[EMAIL PROTECTED]> wrote:
>
> Strange. It is corect to specify workgroup in ~/.smb/smb.conf (or copy it
> from /etc/samba) so your configs are probably OK. Do you have "fuse" module
> loaded or compiled into kernel?
Yes, I do have it. smbnetfs works at least when I 'c
On 2/10/06, Robert Cernansky <[EMAIL PROTECTED]> wrote:
>
> In my case I see (I have mounted it in /mnt/smb):
>
> $ ls /mnt/smb/
>
>
> $ ls /mnt/smb/
> PC1 PC2 PC3 ...
>
> It is also possible omit , for example:
>
> $ ls /mnt/smb/PC1
> share1 share2 ...
>
> I did not force it in any way. Did you s
On 2/10/06, Robert Cernansky <[EMAIL PROTECTED]> wrote:
> On Fri, 10 Feb 2006 11:49:32 +0100 CapSel <[EMAIL PROTECTED]> wrote:
>
> C> This is my script that scans configured subnetwork for guest shares,
> C> makes entries for automount and restarts it.
> C>
&g
Thank you very much Robert, I'll try it right away.
On 2/10/06, Robert Cernansky <[EMAIL PROTECTED]> wrote:
> On Fri, 10 Feb 2006 11:49:32 +0100 CapSel <[EMAIL PROTECTED]> wrote:
>
> C> This is my script that scans configured subnetwork for guest shares,
> C&
This is my script that scans configured subnetwork for guest shares,
makes entries for automount and restarts it.
Is this script helpful to someone? Is it worth to continue making it,
or is there a better way to allow normal programs to browse smb
network.
I don't have a inet page yet, but on nex
I've made a little script in perl that scans some ip's and makes
entries for automount in /var/smb and than this script makes dirs like
192.168.0.3... and in them makes links to "ghosted" dirs in /var/smb.
Any one intrested in it?
This scripts scans only guest accessible shares.
It helped me solve
I wanted to make automation script that would add correct line tu
automount config file for usb devices. I made add script and remove
script, but remove script is not started even after reinserting any
usb storage device.
I added the line:
echo $REMOVER >>/var/log/udev-log
to usb.agent just after
Hi all,
I've set up autofs to mount floppy, cdrom and other devices, and some
smb shares on /mnt/auto/*. When I enter to one of those dirs device is
mounted but, as I set up timeout of 2 secends, nautilus changes dir to
~/ or just closes window after timeout. Is there a way to "force"
nautilus to >
2005/12/27, Glenn Enright <[EMAIL PROTECTED]>:
> On Wednesday 28 December 2005 08:13, capsel wrote:
> > 2005/12/27, Richard Fish <[EMAIL PROTECTED]>:
> > > On 12/27/05, capsel <[EMAIL PROTECTED]> wrote:
> > > > title gentoo
> > >
2005/12/27, Richard Fish <[EMAIL PROTECTED]>:
> On 12/27/05, capsel <[EMAIL PROTECTED]> wrote:
> > title gentoo
> > root (hd0,0)
> > kernel /bzImage root=/dev/sdb2
> > savedefault fallback
>
> Can you post the full contents of your grub.conf/menu.
Hi group
I tryed to make config file for grub to migrate from centos to gentoo,
and even once it booted with saved I think. Some how it booted fith
entry in config file...
centos doesn't have grub-set-default so I ran grub, loaded
configfile and gave command savedefault 4... I don't remember wha
2005/12/21, Iulian <[EMAIL PROTECTED]>:
> Felipe Ribeiro wrote:
> > Where have you downloaded corel draw for linux? I've always looked for it!
> > :-)
> >
> >
> > On 12/21/05, Iulian <[EMAIL PROTECTED]> wrote:
> >
> >> Hi there,
> >> Corel Draw 9 for linux works on Gentoo?
> >>
> >> Iulian
2005/12/21, Ryan <[EMAIL PROTECTED]>:
> Here is a little trick you can use on google when looking for
> converters.. Put the file extension of the file you want to convert in
> front of the number 2. Like this: mdb2, and if you know the file
> extension of the target, add that AFTER the 2. Lik
OpenBase is part of OpenOffice... and is really slow on my laptop.
Whole OpenOffice is slow...
So I'll try that GUIs for mysql.
Do you know any replacement of OpenOffice for my laptop ? :)
BTW. Is there a tool to convert mysql (and possible other) databases
to and from ms-access *.mdb's ?
--
ge
Is there any program for makeing data bases as fast as ms access
(works fast, small) and free as openbase?
On OpenBase process of opening a wizard for form took more than 8 minutes!!
I've got only 128 MB of ram.
--
gentoo-user@gentoo.org mailing list
2005/12/14, Michael Kjorling <[EMAIL PROTECTED]>:
> On 2005-12-14 17:45 +0100, [EMAIL PROTECTED] wrote:
> > Yes, it works, cp /dev/cdrom image.iso too. But some CDs have errors
> > (scratches) that cp/cat can't handle.
>
> Tried dd with `conv=noerror'?
Not yet, but I just noticed that without -clo
2005/12/14, Neil Bothwick <[EMAIL PROTECTED]>:
> On Wed, 14 Dec 2005 16:13:59 +0100, capsel wrote:
>
> > Is there any way to bypass problem with solaris CDs or is there any
> > tool to convert images made by readcd -clone to iso image?
>
> Have you tried creating t
I made a copy of 6 cdroms with
readcd -clone f=iso -noerror retries=1
and only two of them I can
mount -t udf,iso9660 ./iso /mnt/cdrom -o loop
These two are a copy of a "protected" game CD and others are images of
solaris CDs.
I can mount solaris' CDs with
mount -t iso9660 /dev/cdrom /mnt/cdrom
b
Or maybe bind / to a subdir and tar from it. It's like
--one-filesystem but it works always (for me).
2005/11/4, Neil Bothwick <[EMAIL PROTECTED]>:
> On Fri, 4 Nov 2005 14:29:17 +0100, Hemmann, Volker Armin wrote:
>
> > you need to --exclude /proc, or you'll run into problems.
> > You should exclu
Hi all,
I am writing some program... simple program and I've got some code:
j=strcmp( "log", *(lines+i) );
printf( "ble\n" );
if( strcmp( "log", *(lines+i) ) == 0 )
{
printf( "ble2\n" );
it is in for loop. "b
thank you very much :)
--
gentoo-user@gentoo.org mailing list
1. I have 2 computers, first is directly connected to lan with IP
10.0.0.3 and gateway 10.0.0.1 and has second NIC with IP 10.0.0.4
connected to second computer with IP 10.0.0.5
{LAN}--[10.0.0.3|GENTOO|10.0.0.4]---[10.0.0.5]
Is it possible to set up routing from .5 to 10.0.0.0/24 (lan)? I
I managed to make a script to start /etc/init.d/bluetooth after I
connect my usb-bluetooth but I don't know how to force
hotplug/udev/kernel to execute remove action.
Every time I connect bluetooth my script creates executable script
with name from $REMOVER. When I manually execute it it works but
I tryed to do links to directories on other partition on my
experimental server with SELinux. It had some problems with labeling
filesystem.
Is it possible to solve this issue?
2005/10/7, Neil Bothwick <[EMAIL PROTECTED]>:
> On Fri, 07 Oct 2005 09:07:41 +0800, W.Kenworthy wrote:
>
> > If you want
I'm not sure but if it shouldn't be Genux <- Gentoo and Fedora ->
Redhat. Note directions of arrows :)
2005/10/4, Frank Schafer <[EMAIL PROTECTED]>:
> This will be the Gentoo -> Genux equivalent to the Fedora -> Redhat ?
>
> Sounds impressive.
>
> On Mon, 2005-10-03 at 14:44 -0400, Dave Nebinger
Where should I put my own script which is started after I hotplug my
usb bluetooth so that /etc/init.d/bluetooth is started after that?
and how to name it or how to findout the name?
--
gentoo-user@gentoo.org mailing list
AFAIK:
packets can not reach destinations in other subnet (except 0.0.0.0)
than the subnet of your IP. You must have assigned an IP address from
same subnet as destination host.
so client can ping all 10 and two sides of server
Please check if you can ping other IP from 192.168.0.0 subnet.
My
2005/9/18, Holly Bostick <[EMAIL PROTECTED]>:
> Well, that should work, but the 'better' way is simply to recompile the
> kernel so that ide-cd is statically compiled (* or Y, rather than M),
> and then it would be automatically loaded by the kernel when the device
> is discovered (which would also
port_pc is loaded automaticly.
What can I do to force hotplug/coldplug to load ide-cd and so to force
udev to create hdc? I added ide-cd to
/etc/modules.autoload.d/kernel-2.6.
2005/9/18, Bob Sanders <[EMAIL PROTECTED]>:
> On Sat, 17 Sep 2005 20:01:41 +0200
> capsel <[EMAIL PROTECTED]
t;error" does not depend on RC_DEVICE_TARBALL, hardware,
kernel (gentoo-sources, vanilla-sources)...
2005/9/17, Rumen Yotov <[EMAIL PROTECTED]>:
> capsel wrote:
> > 2005/9/17, Dave Nebinger <[EMAIL PROTECTED]>:
> >
> >>>So for example lp* stays (it'
2005/9/17, Dave Nebinger <[EMAIL PROTECTED]>:
> > So for example lp* stays (it's another one that disappears), all hdc?
> > stays, but hdc still is not there. File devices.tar.bz2 is updated by
> > system and it has not hdc.
> > What else can I do?
>
> Not use the tarball option?
>
> I mean, seri
On 9/16/05, Dave Nebinger <[EMAIL PROTECTED]> wrote:
> > I did something like that:
> > -I set up RC_DEVICE_TARBALL="no"
> > -rebooted, all hdcX disappeard, and hdc appeard
> > -I set up RC_DEVICE_TARBALL="yes"
> > -rebooted
> > -there is no hdc*
> >
> > what else can I do?
>
> Go to the udev migr
On 9/16/05, Dave Nebinger <[EMAIL PROTECTED]> wrote:
> > When I create /dev/hdc it stays for one reboot.
> > These values I've got in /etc/conf.d/rc:
> >
> > RC_DEVICES="udev"
> > RC_DEVICE_TARBALL="yes"
> >
> > hdc is a cdrom on my laptop. What can cause this?
>
> Turn off the tarball option, o
As in subject - on every restart hdc, cdrom (link), dvd (link)
disappear from /dev
I'm using udev.
I haven't found anything about hdc in /etc/udev.
I don't know when exactly it stoped work, it worked after last emerge
-uDN world.
When I create /dev/hdc it stays for one reboot.
These values I've got
works fine, thanks for help :)
Should I post a bug with solved status or not?
On 9/9/05, Mariusz Pękala <[EMAIL PROTECTED]> wrote:
> On 2005-09-09 11:30:55 +0200 (Fri, Sep), capsel wrote:
> > grub hangs while booting and there are no errors when I install it on
> > mbr (BIOS
> Re-emerge and re-install Grub. If Grub hangs when you try to install
> it, which I assume is what is happening, then you can try starting as: #
> grub --no-floppy, to see if it works. Grub hanging basically implies
> that there's a hardware hick up of some sort.
>
> If Lilo works fine regardle
> Ok, now we're talking. When you enter Grub this way it doesn't care
> about an existing configuration - so IMHO no problem there. Here's what
> I would do:
>
> 1. Check if top shows reasonable results - if not step 3
> 2. Re-emerge grub - if that doesn't help - step 3
> 3. memtest86 for a day
>
current:
hda1 swap
hda2 reiserfs /
---previous1---
hda1 ext2 /boot
hda2 reiserfs /
hda3 swap
---previous2---
hda1 swap
hda2 ext2 /boot
hda3 reiserfs /
swap is 258MB, /boot is about 24MB, / is rest of disk which is 10GB
Should I post output of echo -ne "p\nq\n" | fdisk /dev/hda?
device map:
(fd0)
It is second time i'm posting about this problem on this group, maybe
I did it wrong last time...
so the problem is GRUB
it doesn't matter what partitions I have or how do I install it
(always "successfull")
it still shows no memory at all (run grub from bash, delete "grub>",
put zeros where amoun
please check it this is a flash animations proble. if it is then set
XLIB_SKIP_ARGB_VISUALS=yes
--
gentoo-user@gentoo.org mailing list
I have /boot with ext2 on hda1
/ with reiserfs hda2
swap on hda3
some time ago grub worked fine (maybe with different configuration of devices)
through last year I was using lilo (everywhere, on my servers too)
today I tryed to install grub on mbr:
root (hd0,0)
setup (hd0)
quit
it installed itse
I have /boot with ext2 on hda1
/ with reiserfs hda2
swap on hda3
some time ago grub worked fine (maybe with different configuration of devices)
through last year I was using lilo (everywhere, on my servers too)
today I tryed to install grub on mbr:
root (hd0,0)
setup (hd0)
quit
it installed itse
73 matches
Mail list logo
