Hello,
I have a kernel with SW_WATCHDOG and simply enabled watchdog in rc.conf.
I haven't found much info on that topic but I guess when the machine hangs
(watchdogd doesn't get a result from the trivial fsck (what's that btw?)) the
kernel will reset the machine. Best would be if I never see wat
Am Samstag, 22. Januar 2005 15:52 schrieb Shunsuke Akiyama:
[...]
> Good work!
>
> I've updated your patch. If attached patch works correctly with new
> revision chip, I'll commit this. Please test attached patch, and tell
> me the result.
I tested it (after removing the DOS ^M characters) again
hi,folks:
after installed RocketPort uPCI card into my box;it
dumps the follow eror msgs:
rp0: port 0xde00-0xdeff,0xdd80-0xddff mem
0xfcedff80-0xfced
irq 19 at device 10.0 on pci2
rp0: failed: rid 0x10 is memory, requested 4
rp0: ioaddr mapping failed for RocketPort(PCI).
device_attach: rp
# [EMAIL PROTECTED] / 2005-01-20 15:26:21 -0800:
> Karl Denninger <[EMAIL PROTECTED]> wrote:
>
> > Seagate's have been getting very poor performance reviews of late.
>
> Do you have any URLs? While I haven't been following disk drives
> closely, I haven't seen anything that points at "v
At 2005-01-24 00:00:32+, "Net Virtual Mailing Lists" writes:
> Hello Stefan (and everyone else!),
>
> Thank you for your great comments! I think I have a 3c9xx card around
> here somewhere, I will give that a shot when it reboots the next time
> (just to see). It looks like for future system
On Mon, Jan 24, 2005 at 11:14:26AM +1100, Peter Jeremy wrote..
> On Mon, 2005-Jan-24 00:27:38 +0100, Stefan Eßer wrote:
> >The TX threshold messages issued by the dc driver appear more as an
> >indication that the PCI bus is under severe load, than as a hint that
> >the dc driver is causing the reb
Hello all.
I use FreeBSD 5.3-RELEASE-p5 on i386. Sometimes my system is stuck at the
last steps of shutdown. Following quoting is what I saw yesterday when my
system was stuck again (the last lines):
init: some processes would not die; ps axl advised
Waiting (max 60 seconds) for system process `v
On Sun, 23 Jan 2005, Artem Kuchin wrote:
> On Sat, 22 Jan 2005, Artem Kuchin wrote:
>
>> I cvssed just an hour ago. 5.3-STABLE and cannot build kernel with
>> WITNES. It complains:
>
> This occurs when building WITNESS without DDB in the kernel, which was not
> a tested build case when I added
Hi,
Recently (within the last 2 weeks or so) something was committed which
messed up my ability to grab pics off my canon PowerShot S200. I type "gphoto2
--auto-detect --get-all-files" on the commandline, and the following (roughly,
since it's from memory) message pops up:
WARNING: device_dest
On Mon, 24 Jan 2005, Kenneth Culver <[EMAIL PROTECTED]> wrote:
> Hi,
> Recently (within the last 2 weeks or so) something was committed which
> messed up my ability to grab pics off my canon PowerShot S200. I type "gphoto2
> --auto-detect --get-all-files" on the commandline, and the following
Rostislav Krasny wrote:
Hello all.
I use FreeBSD 5.3-RELEASE-p5 on i386. Sometimes my system is stuck at the
last steps of shutdown. Following quoting is what I saw yesterday when my
system was stuck again (the last lines):
init: some processes would not die; ps axl advised
You should try to find o
On Sun, 23 Jan 2005 22:41:34 +1000, Warren
<[EMAIL PROTECTED]> wrote:
> I recently took my primary hdd running FreeBSD 4.11-STABLE out of my main
> machine leaving my 2ndry hdd in the machine and installing FreeBSD5.3-STABLE
> on it to use as the new primary. When everything was done and i plugged
On Jan 24, 2005, at 3:11 AM, Emanuel Strobl wrote:
kernel will reset the machine. Best would be if I never see watchdog in
action but I'm seeing a panic message after some interrupt statistics
(see
below) and the machine doesn't power off (like it does without
watchdogd
enabled).
Interesting...
On Jan 18, 2005, at 7:48 PM, Kris Kennaway wrote:
Do yourself a favour and use -O2 -fno-strict-alias instead, because
some ports *are broken* with plain -O2.
I just tried this on a 5-STABLE dual opteron, and it complained about
unknown option. I had to specify the full option -fno-strict-aliasing
Am Montag, 24. Januar 2005 19:29 schrieb Vivek Khera:
> On Jan 24, 2005, at 3:11 AM, Emanuel Strobl wrote:
> > kernel will reset the machine. Best would be if I never see watchdog in
> > action but I'm seeing a panic message after some interrupt statistics
> > (see
> > below) and the machine doesn'
On Jan 24, 2005, at 1:44 PM, Emanuel Strobl wrote:
Maybe Sean Kelly can tell us how SW_WATCHDOG interacts with ACPI,
since I
think the problem occurs when the kernel disables ACPI, right? (just my
"feeling")
Next chance I get I'll play with the SW_WATCHDOG and see if that stops
the problem on my
I've been playing with vinum and gvinum with a RAID-1 boot setup (now
abandoned, hardware RAID was $29 - SM P4DC6+ with Adaptec 2005S) and with
a RAID5 array using a Compaq version of the Adaptec 39160 card.
I've found that only "geom_vinum_load="YES" works in order to get the RAID
5 array moun
On Mon, 2005-01-24 at 14:29 -0500, Michael L. Squires wrote:
> I've been playing with vinum and gvinum with a RAID-1 boot setup (now
> abandoned, hardware RAID was $29 - SM P4DC6+ with Adaptec 2005S) and with
> a RAID5 array using a Compaq version of the Adaptec 39160 card.
>
> I've found that o
> Do you have any files on ad1s1e?
>
> mount /dev/ad1s1e /mnt
> ls -lR /mnt
>
> Scot
no, there arent any files there.
--
Yours Sincerely
Shinjii
http://www.shinji.nq.nu
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinf
>>> - Писмо от [EMAIL PROTECTED] -
>>> Дата: Sun, 23 Jan 2005 07:22:20 -0500
>>> Подател: Matt Herzog <[EMAIL PROTECTED]>
>>> Отговор-До:Matt Herzog <[EMAIL PROTECTED]>
>>> Относно: loader.conf examples
>>> Получател:freebsd-stable@freebsd.org
>>>
>>> Can anyone point me to a load
in message <[EMAIL PROTECTED]>,
wrote Rostislav Krasny thusly...
>
> I use FreeBSD 5.3-RELEASE-p5 on i386. Sometimes my system is stuck
> at the last steps of shutdown. Following quoting is what I saw
> yesterday when my system was stuck again (the last lines):
>
> init: some processes would not d
21 matches
Mail list logo
