I've found that only "geom_vinum_load="YES" works in order to get the RAID 5 array mounted at boot time; "vinum_load" with or without "vinum.autostart" doesn't work. (Doesn't work means that the boot fails when /dev/vinum/raid can't be mounted as per /etc/fstab, and I have to execute "vinum" before I can mount it while running single user after the crash).
I've seen one other message that "vinum_load" didn't work for one other 5.3-R user, but I don't know if we both made the same mistake or if something else is wrong.
(The Compaq card won't configure on my system; I found that I could flash it using the v2.57 Adaptec BIOS update and after that I could set the bus speed and turn off the BIOS (otherwise the disks are all attached "async" and the system tries to boot off the 39160). Adaptec warns of dire consequences, and the flash does not remove the identification of the card as a Compaq OEM version, but I haven't had problems after the BIOS update).
Mike Squires
_______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
