Hi,
I'd like to confirm my understanding of current status on this NIC. It
seems, based on some searching, the current Realtek driver in FreeBSD
doesn't support the 8111C, and that although the vendor-supplied driver
_may_ work for older 5.x and 6.0 releases (if one can get it compiled, I
cou
Oliver Fromme wrote:
Sebastian <[EMAIL PROTECTED]> wrote:
> I'd like to confirm my understanding of current status on this NIC. It
> seems, based on some searching, the current Realtek driver in FreeBSD
> doesn't support the 8111C, and that although the vendor-suppl
thin here. :)
Would you be able to send me your successful 6.3 driver? I'd like to
test it on FreeNAS.
Thanks,
Sebastian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Sebastian wrote:
Da Rock wrote:
I have used the compiled driver on 6.3 with success- but then I've used
the driver linked in a post to drivers list. 7.0 is a no go.
I tried to compile the current OEM Realtek driver under (v176) on fbsd
6.3, but couldn't get it to build. My foo i
Andrew Falanga wrote:
On Saturday 20 September 2008 12:14:57 Sebastian wrote:
Da Rock wrote:
I have used the compiled driver on 6.3 with success- but then I've used
the driver linked in a post to drivers list. 7.0 is a no go.
I tried to compile the current OEM Realtek d
A4, UDMA5,
all seemingly without errors. But when I use UDMA6, the machine
immediately dies when the disk gets written to.
So my question:
What's the best way to tell FreeBSD to always use UDMA5 mode on that
disk at boot time (before it attempts to use the drive)?
Markus Trippelsdorf wrote:
Are you sure that your hard drive is not dying?
Run smartctl -a /dev/ad0 and see if any errors were being logged.
(smartctl is part of the smartmontools port)
You should also try another cable.
Thanks for the response. I'm reasonably sure, the disk is brand new, an
Sebastian wrote:
Markus Trippelsdorf wrote:
Are you sure that your hard drive is not dying? Run smartctl -a
/dev/ad0 and see if any errors were being logged.
(smartctl is part of the smartmontools port)
You should also try another cable.
Thanks for the response. I'm reasonably sure
Sebastian wrote:
Hi,
Installing 6.0-RELEASE on a new machine. (Have tried 5.4 too). Using a
PCChips M848ALU motherboard with onboard SiS
IDE controller, and a Hitachi 160gb disk.
When my disk is in UDMA6 (133) mode, FreeBSD dies painfully with many
errors like:
ad0: WARNING
> I have spent 20 minutes or so googling around to find the best way to
> _move_ a complete directory hierarchy. But must admitt that I haven't
> foundmany good answers.
>
> The best suggestion was from
> http://badgertronics.com/knowledge/one.adp?parent=25:
>
> To move /tmp/blarg to /var:
> % cd /
hi,
i wonna spin down an ata drive which is used as backup drive so it
doesnt need to "run" all the time. i googled the bit and found a lot of
people having the same problem - but no solution :(
with scsi it is no problem (i read) but ata ? is there any stable
solution ?
thx
try "man 1 vidcontrol"
hth
seb
On Mon, 2003-12-08 at 21:35, Aleksander Rozman - Andy wrote:
> Hi !
>
> I have just installed FreeBSD onto my notebook. I am using FreeBSD for
> quite some time, and now I decided to install it on my notebook (I got
> tired of both RedHat and Windows 2000, which
Hello,
You can store whole db files too. It's faster to run database from scratch
than use mysqldump and mysql "source".
Best regards,
Shamrock
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
T
Hi,
I'm not sure but I think you can try use "sharedscripts" in yor logrotete
script.
Another solution is make script which unlink/link logs.
Best regards,
Shamrock
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinf
Hello,
Yes you're right but what I meant was something like this ;))
http://www.mysqlperformanceblog.com/2006/08/21/using-lvm-for-mysql-backup-and-replication-setup/
It's simple, safe and faster than mysqldump.
On 3 GB database it takes only 3-5 seconds.
Best regards,
Sebast
Hi,
I use it and it works fine for me. I don't need any third party software to
run/restart process.
Recently I used daemontools for respawn process but it was uncomfortable to
install and configure for me.
Best regards,
Sebastian Tymkow
2008/11/27 Jonathan McKeown <[EMAIL PROTECTED
seem to be giving any clues as
to why ipdivert won't load... What am I doing wrong?
Regards, Sebastian Ramadan.
My uname -a, /boot/loader.conf, kldstat and a successful load of ipdivert
using kldload after boot time:
domU-12-31-39-02-15-3A# uname -a
FreeBSD domU-12-31-39-02-15-3A 8.2-RELEASE
ton detected: disabling emulate3Button
[ 49888.691] (II) config/hal: removing device Microsoft 2.4GHz Transceiver
v8.0
[ 49888.696] (II) UnloadModule: "kbd"
[ 49888.696] (II) Unloading kbd
Question is: how to prevent this behavior in X and how to reload module
'kbd' under working X sess
nglists, looked in to the
Handbook and did not find a solution.
I would realy appreciate your help.
thx
Sebastian
--
If you share pain
there is less of it.
If you share joy
there is more of it.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org
u posed to freebsd-questions. I'd be happy
to hear whether you found a solution to your problem or know how to do what I
need. Thanks a lot in advance.
Greetings,
Sebastian
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/l
Hi,
I'm trying to install an Imation Travan 3 parallel tape backup in a
FreeBSD 4.10 box. Has FreeBSD support for it?
I tried several things, including using the mt command with /dev/ppi0:
# mt -f /dev/ppi0 status
mt: Inappropriate ioctl for device
And i don't know what that could mean. Any id
Bill,
Well... external drives ain't that cheap in Argentina, and we
already got this tape (which fits well with the amount of data we want
to backup), so we would really like to have it working.. :)
Thanks anyway for the advice.
Bill Campbell wrote:
My experience with Travan tape drives ha
Hi,
if you have a bootebel CD-Rom installed you can get a live CD from
http://www.freesbie.org/ and boot with it. then you can mount your
root-FS and edit the boot.config file.
Sebastian
On Sun, 1 Feb 2004 13:06:04 +0200
Mike Jackson <[EMAIL PROTECTED]> wrote:
> Hi,
> I was doi
Hi,
On Sun, 1 Feb 2004 14:00:50 +0200
Mike Jackson <[EMAIL PROTECTED]> wrote:
> ext Sebastian Kutsch ([EMAIL PROTECTED]) wrote:
> > Hi,
> >
> > if you have a bootebel CD-Rom installed you can get a live CD from
> > http://www.freesbie.org/ and boot with it. th
l the volume. I can turn the volume off or
on, but that all I can do.
Has anyone an Idea what the problem is?
Sebastian
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to &q
On Sun, 1 Feb 2004 20:49:11 +0100
Melvyn Sopacua <[EMAIL PROTECTED]> wrote:
> On Sunday 01 February 2004 16:17, Sebastian Kutsch wrote:
>
> > I have a onboard soundcard with a sis 7012 soundchipset.
> > I have compiled the kernel with the pcm device-driver and the
> &
On Mon, 2 Feb 2004 00:39:27 +0100
Melvyn Sopacua <[EMAIL PROTECTED]> wrote:
> On Sunday 01 February 2004 21:59, Sebastian Kutsch wrote:
> > On Sun, 1 Feb 2004 20:49:11 +0100
> >
> > Melvyn Sopacua <[EMAIL PROTECTED]> wrote:
> > > On Sunday 01 February 200
hi,
i am running fbsd 5.1. when i try to mount a samba share on a debian
system i get :
smbfs: server name "x.y" too long
the server name is 16 chars long and i found out (looking at the
sources) that there is a limit of 15.
my question: why is there such a limit? (i used this share from several
l
hi,
On Sat, 2003-09-13 at 11:46, Ian Todd wrote:
> I have a gforce 2 mx 400 and trying to run x windows. I have
> downloaded and installed the latest drivers for it and i am still
> getting the same error message before i installed it. what could the
> problem be the error is:
>
> Fatal server er
t; any other idea?
>
> On 13 Sep 2003 11:59:59 +0200 sebastian ssmoller
> ([EMAIL PROTECTED]) wrote:
>
> >hi,
> >
> >On Sat, 2003-09-13 at 11:46, Ian Todd wrote:
> >> I have a gforce 2 mx 400 and trying to run x windows. I have
> >> downloaded
On Sat, 2003-09-13 at 15:04, Dancho Penev wrote:
> On Sat, Sep 13, 2003 at 11:22:57AM +0200, sebastian ssmoller wrote:
> >From: sebastian ssmoller <[EMAIL PROTECTED]>
> >To: [EMAIL PROTECTED]
> >Date: 13 Sep 2003 11:22:57 +0200
> >Subject: smbmount problem
> >
hi,
another newbie question :)
i am running freebsd 5.1 release.
each time i want to use the logout menuitem of the gnome menu the gnome
panel hangs. i searched the web and found several infos about it but no
solution. any gnome2 user here having solved the probem ?
thx
seb
ps: gnomepanel
Am Son, 2003-09-14 um 16.31 schrieb Lewis Thompson:
> Hi,
>
> I'm trying to setup a vinum mirrored root fs. I've not got very far
> (although I have some excellent help once I get past this stage ;) --
> I'm trying to duplicate my disk.
why do u want to double ur disk ? i have no knowledge about
sers at the list ??
thx
seb
> Hope this helps.
> --
> phil
>
> Sebastian Ssmoller wrote:
>
> >hi,
> >another newbie question :)
> >
> >i am running freebsd 5.1 release.
> >
> >each time i want to use the logout menuitem of the gnome menu t
On Mon, 15 Sep 2003 14:37:02 +0500
"Vyacheslav M." <[EMAIL PROTECTED]> wrote:
> Dear sirs,
> I'm looking for FreeBSD emulator for Windows. Could you please to help
> me with mu request? Thank you in advance.
hi,
what about www.vmware.com ?
seb
>
>
>
> --
> Best regards,
> Vyacheslav
On Sat, 2003-09-20 at 08:25, FreeBSD MAIL wrote:
> I want to use PuTTY and ssh to port forward and map a samba share across the
> internet. From what I have read on the net it almost seems possable.
i guess u have to set up ssh port forwarding for the ports 137,138 and
139.
which box shall provi
hi,
i use tdsl with my fbsd 5.1 release box. to establish the connection i
run:
$ ppp -auto tdsl
$ ppp -v /var/run/internet dial# i used "set server
/var/run/internet" in /etc/ppp/ppp.conf
so everything works fine but one thing is missing: on my linux box i
used pppd which logged the bytes s
> I am using FreeBSD 4.8 and Samba 2.2.8 as the server, I would like to use any
> windows operating system for the client side, but probably XP.
> (I want to map the samba share to the windows box)
>
so one idea could be to start three ssh tunnels from client side. which
command line u may wonna
great script ! that's what i was looking for :)
thx
seb
On Sat, 2003-09-20 at 18:09, jimmie james wrote:
> >$ ppp -auto tdsl
> >$ ppp -v /var/run/internet dial# i used "set
> server
> >/var/run/internet" in /etc/ppp/ppp.conf
>
> >logged the bytes sent and received so i could calc
> the
> >d
hi,
recently i set up a new freebsd current. i want to use xfce4 as
desktop/window manager but also evolution as mail client. i had a look
at the dependencies of evolution and found out that evolution depends on
the whole gnome2 desktop (!)
can anyone explain me why evolution depends on things lik
uer wrote:
> > On Sunday 02 November 2003 19:00, Joe Marcus Clarke wrote:
> > > On Sun, 2003-11-02 at 08:46, sebastian ssmoller wrote:
> > > > hi,
> > > > recently i set up a new freebsd current. i want to use xfce4 as
> > > > desktop/window m
On Sun, 2003-11-02 at 20:06, Joe Marcus Clarke wrote:
> On Sun, 2003-11-02 at 15:06, sebastian ssmoller wrote:
> > hi,
> > so i have to install a lot of gnome stuff to be able to use evolution
> > right ? thats bad :( ... i wonder if all these dependencies are
On Sun, 2003-11-02 at 20:25, Joe Marcus Clarke wrote:
> On Sun, 2003-11-02 at 15:26, sebastian ssmoller wrote:
> > On Sun, 2003-11-02 at 20:06, Joe Marcus Clarke wrote:
> > > On Sun, 2003-11-02 at 15:06, sebastian ssmoller wrote:
> > > > hi,
> > > > so i
solve this problem.
thx
Sebastian
--
If you share pain
there is less of it.
If you share joy
there is more of it.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hi,
if have have configured static NAT on machine A do the TCP/IP-packeges
get injectet into the firewall of the machine A or do they reach machine
B unfiltered?
Sebastian
--
If you share pain
there is less of it.
If you share joy
there is more of it
ed it).
But if I change to X I encounter problems. I.E. when I'm using rox-filer
or nautilus files/directorys with non-ASCI-charakters in their
name created in the shell show up with the note "not valid UTF-8". The
other way around I get the same result.
Where is the Problem? What did I
http://www.mirekw.com/winfreeware/mwsnap.html
--
If you share pain
there is less of it.
If you share joy
there is more of it.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Hello ppl,
I want to setup an encrypted vpn between a
winxp and a freebsd5 box with both having
dynamic ips. Does someone know a piece of
software that is able to manage this?
Thanks in advance...
...Sebastian
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe fr
Hello,
how do I make buildworld and let it compile
the MIT Kerberos V port as the system kerberos
instead of heimdal?
thanks in advance...
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
On Mon, 28 Oct 2002 21:49:48 +0200
"D. Penev" <[EMAIL PROTECTED]> wrote:
> On Mon, Oct 28, 2002 at 09:08:01PM +0100, Sebastian Boldt wrote:
> >Date: Mon, 28 Oct 2002 21:08:01 +0100
> >From: Sebastian Boldt <[EMAIL PROTECTED]>
> >To: [EMAIL PROTECTED]
&g
Hello,
when I make buildworld and install MIT kerberos 5
port afterwards, is there any chance to let the
ssh utility(or other client utilities wich can't
be pam'nized) authenticate through kerberos?
... S.Boldt
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" i
Hello ppl,
I got two different machines, a PIII 500 and a AMD k6-2 300.
I want the PIII to build a release for the AMD machine with
optimizations. Is this possible with a simple make release,
or do I have to do some sort of cross compiling?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "uns
Hallo,
could you tell me how to download FreeBSD from your site?
Gruß
Sebastian
"Ein Herz für Kinder" - Ihre Spende hilft! Aktion: www.deutschlandsegelt.de
Unser Dankeschön: Ihr Name auf dem Segel der 1. deutschen America&#
ecause the FreeBSD box is my fileserver storing my whole
media library. Many thanks for help in advance!
greetings,
Sebastian Pahlke
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscri
8 I get 3416071 bytes/sec.
But this is still very poor. The system is a PIII 800MHz and a SCSI-3 disc
in single user mode booted from FreeBSD release 5.4 live-cd.
Any ideas how to analyze this? Thanks in advance!
greetings,
Sebastian Pahlke
___
fr
y partitions, but
the Windows version only supports one.
This is the story so far. Please help me find a happy end. Thank you
very much.
--
Sebastian Reichelt
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
r: It also crashes
when I just do:
echo "Hello" >/dev/cuaa0
Any ideas?
--
Sebastian Reichelt
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
a normal computer
Oops, that should read: "a normal computer user". :-)
--
Sebastian Reichelt
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I changed some BIOS settings, and now it works. Thanks for your help.
--
Sebastian Reichelt
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
have
better SATA-handling I've been told.
Sebastian Holmqvist
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
t report anything.
Please get back to me if you manage to survive any large data-transfers :)
In that case; "5.3 HERE I COME" :p
Sebastian Holmqvist
On Mon, 8 Nov 2004 13:42:57 -0500, Louis LeBlanc <[EMAIL PROTECTED]> wrote:
> On 11/08/04 06:57 PM, Sebastian Holmqvi
On Mon, 8 Nov 2004 14:25:18 -0500, Louis LeBlanc <[EMAIL PROTECTED]> wrote:
> On 11/08/04 08:04 PM, Sebastian Holmqvist sat at the `puter and typed:
>
>
> > "I've been getting WRITE_DMA timeouts in /var/log/messages though,
> > typically 1 to 3 of them before
On Mon, 8 Nov 2004 21:04:31 +0100, Sebastian Holmqvist
<[EMAIL PROTECTED]> wrote:
> On Mon, 8 Nov 2004 14:25:18 -0500, Louis LeBlanc <[EMAIL PROTECTED]> wrote:
>
>
> > On 11/08/04 08:04 PM, Sebastian Holmqvist sat at the `puter and typed:
> >
> >
> &g
On Wed, 10 Nov 2004 13:25:18 -0500, Louis LeBlanc
<[EMAIL PROTECTED]> wrote:
> On 11/10/04 07:13 PM, Sebastian Holmqvist sat at the `puter and typed:
> > >
>
>
> >
> > Gah!!
> > This drives me mad!
> >
> > My cvsup didn't go as I plann
On Wed, 10 Nov 2004 14:18:39 -0500, Louis LeBlanc
<[EMAIL PROTECTED]> wrote:
> On 11/10/04 07:29 PM, Sebastian Holmqvist sat at the `puter and typed:
>
>
> > On Wed, 10 Nov 2004 13:25:18 -0500, Louis LeBlanc
> > <[EMAIL PROTECTED]> wrote:
> > > On 11/
How come I saw that 5.x had support several months ago, and when I
look today, it's gone?
--
Sebastian Holmqvist
Webprogrammer / HL2 modder
http://cae.hl2files.com
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/fr
On Wed, 10 Nov 2004 20:42:43 +0100, Sebastian Holmqvist
<[EMAIL PROTECTED]> wrote:
> On Wed, 10 Nov 2004 14:18:39 -0500, Louis LeBlanc
>
>
> <[EMAIL PROTECTED]> wrote:
> > On 11/10/04 07:29 PM, Sebastian Holmqvist sat at the `puter and typed:
> >
> >
On Wed, 10 Nov 2004 16:40:13 -0500, Louis LeBlanc
<[EMAIL PROTECTED]> wrote:
> On 11/10/04 10:29 PM, Sebastian Holmqvist sat at the `puter and typed:
> > >
> >
> > Hey, I found this just now, might be something?
> > http://lists.freebsd.org/pipermail/freebsd-b
SATA-ports
instead of the PATA on the card.
--
Sebastian Holmqvist
Webprogrammer / HL2 modder
http://cae.hl2files.com
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Wed, 10 Nov 2004 17:54:21 -0500, Louis LeBlanc
<[EMAIL PROTECTED]> wrote:
> On 11/10/04 10:54 PM, Sebastian Holmqvist sat at the `puter and typed:
>
>
> > On Wed, 10 Nov 2004 16:40:13 -0500, Louis LeBlanc
> > <[EMAIL PROTECTED]> wrote:
> > > On 11/
On Sat, 13 Nov 2004 12:04:47 -0500, Louis LeBlanc
<[EMAIL PROTECTED]> wrote:
> Well Sebastian, it looks like 5.3 has solved all my problems.
>
> I put my drive under extreme duress last night with a sustained load
> of about 22M/s with spikes up to 24 (according to the gkrellm
81: error: label at end of compound statement
*** Error code 1
Stop in /usr/ports/irc/psybnc/work/psybnc.
*** Error code 1
Stop in /usr/ports/irc/psybnc.
I run 5.3 ISO-image and a cvsupped ports-tree.
--
Sebastian Holmqvist
Webprogrammer / HL2 modder
http://
Every time I transfer something over proftpd, the server looses
contact with the network.
I can't ping it, it can't ping back.
Only resolution is to restart..
Why?
--
Sebastian Holmqvist
Webprogrammer / HL2 modder
http://cae.hl2files.com
I get vr0: rx packet lost when I transfer files.
I did not get these signals when I ran other networks-cards using ed and rl.
I've tested the sdram with memtest86+.
--
Sebastian Holmqvist
Webprogrammer / HL2 modder
http://cae.hl2files.com
___
[
On Sat, 13 Nov 2004 20:52:49 +0100, Sebastian Holmqvist
<[EMAIL PROTECTED]> wrote:
> On Sat, 13 Nov 2004 12:04:47 -0500, Louis LeBlanc
>
>
> <[EMAIL PROTECTED]> wrote:
> > Well Sebastian, it looks like 5.3 has solved all my problems.
> >
> > I put my dr
D 8BBB EB03 BA83 5DB4 3B88 86FC F03A 90A1 BE8F
> _
> ASCII ribbon campaign ( )
> - against HTML, vCards and X
>
Had some bad experience with my previous one: Promise SATA150 TX2Plus,
so I would like some tips.
Two harddrives will be attached for now, maybe more later.
Alot of data transfer.
I have an 5.3-can running.
--
Sebastian Holmqvist
Webprogrammer / HL2 modder
http://cae.hl2files.com
t
before battery power goes out it will do a clean shutdown and also
restart the system when AC power is restored (see apcupsd).
That is what I'm using.
Regards,
Sebastian Seidl
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.o
nstead.
If the the freezer doesn't work I suggest finding an identical drive and
replace the electronic board. Worked for many damaged drives.
Regards,
Sebastian Seidl
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/ma
Hello,
If you don't want to do this using server features you should do it in your
program
(like in config file).
Best regards,
Shamrock
2008/12/10 pugal pugal <[EMAIL PROTECTED]>
> Hi all
> I will explain the scenario clearly.
>
> I have a server program say server.c listening on some XXX por
Hi,
I did a freebsd-update to 7.1-RELEASE as described in the release notes.
After that, I installed Openoffice (with pkg_add) and got several warnings like
this one:
pkg_add: warning: package 'gnome-vfs-2.22.0_2' requires 'atk-1.22.0_1', but
'atk-1.20.0' is installed
Now I did
# pkg_add -r atk
]
Sent: Tue 1/13/2009 11:01 PM
To: Sebastian Setzer
Subject: Re: freebsd-update doesn't seem to update to Latest
On Tue, Jan 13, 2009 at 09:47:33PM +0100, Sebastian Setzer wrote:
>
> Hi,
> I did a freebsd-update to 7.1-RELEASE as described in the release notes.
> After that, I ins
whole link, e.g. 100Mbit/s.
I've tried to add a pipe:
$cmd pipe 50 config bw 100Mbit/s queue $queue_size
$cmd add pipe 50 all from any to any via $in_if
But when I have a look at the pipes with 'ipfw show' I can only see
packets go through the
a - I just wantet to use StarBasic Macros.
But OOo seems to need it. I can't even set the Macro security options (when I
press the button, nothing happens).
Sebastian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailma
you a PID and kill
the process?
> Also with the above code I would be waiting for 1 second even if the
> java process finished sooner. But that is a penalty I'm willing to
> pay, unless there is a more elegant solution.
>
> How do I do this?
>
Regards,
Sebastian
___
(likely) have net.inet.ip.fw.one_pass=1 .. so
> that packets exiting from pipes aren't seen by the firewall again. If
> you set one_pass=0, packets are reinjected into the firewall at the rule
> following the pipe (or queue) action, which is what you want to do here.
Actually t
ory to spare for each?
Is there any chance to get the dropped packets for _each_ queue (e.g.
logged to a file for further investigation)?
Does ipfw provide something here?
I'm mainly doing experiments with different kinds of settings (bandwidth
limitations, variable delay, dropped pa
riginal Message-
From: Kurt Buff
Sent: Thu 1/22/2009 9:54 PM
To: Sebastian Setzer
Subject: Re: OpenOffice 3.0, which java must I use?
$ uname -a
FreeBSD grimsqueaker-bsd.pigfarm.org 7.1-STABLE FreeBSD 7.1-STABLE #7:
Sun Jan 11 21:12:44 PST 2009 root@:/usr/obj/usr/src/sys/GENERIC
amd64
$ pkg_i
510 pipe?
I thought I could see any connection going through that pipe.
Regards,
Sebastian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
le to create install iso from chroot without all this
stuff
(I mean make release, even LOCAL_SCRIPT parameter doesn't help ).
I try to do my own custom iso thats why I need make it from my own
chrooted
environment.
Best regards,
Sebastian Tymkow
Hi,
I'm trying to use sed in script to append file after pattern but I couldn't
find any good example
how can I do it.
I've tried with sed -e '/PATTERN/ a\ line' file but this did'n work. There
are many axamples in internet but none
of them work on FreeBSD.
B
Hi,
This should help:
http://www.gsoft.com.au/~doconnor/FreeBSD-release.html
http://www.gsoft.com.au/~doconnor/release/install.cfg
I made my own release with ports on board without additional
post-installing.
This ports, are configured and ready to work "out of box".
Best regards,
Hello,
What is on logs ?
What do you have in your /etc/rc.conf for named ?
Best regards,
Shamrock
2008/9/3 Richard Yang <[EMAIL PROTECTED]>
> Hello,
>
> When I tried "/etc/rc.d/named forcestart", i got
> ./named: WARNING: run_rc_command: cannot run /etc/namedb/named
>
> what does it mean and h
Hello,
Have you tried cpanel or webmin ?
Or maybe you're looking for solution like ftp server and accounts in
database ?
Best regards,
Sebastian Tymków
2008/9/4 Martin Schweizer <[EMAIL PROTECTED]>
> Hello
>
> I've three FreeBSD 7.0 server. Im looking for a combina
; solution?
>
> > > I've three FreeBSD 7.0 server. Im looking for a combination where I can
> > > create/delete etc. ftp users as a non-root user (probably from a
> template).
>
>
I haven't used such solution,but you can try
Can you help me (or forward this message to proper person) about supporting filesystem
UDF versions 1.02/1.50/2.01 by FreeBSD 5.2.1
I can mount DVD disc with any of above formats, but there is a problem with reading
files written on this disc that are grater than 2GB?!
while copying using mc/cp/d
96 matches
Mail list logo
