Hello,
Can anyone point me in the right direction of a tutorial on setting up a VPN
between 2 FreeBSD 4.6 servers.
I cannot find much in the handbook or on search engines, although I have
found references to either PPTP or vpnd.
Cheers for your help.
Lee
To Unsubscribe: send mail to [EMAIL
x27;m having the same problem. Anyone have a solution?
---
Lee Capps
Technology Specialist
[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to &q
Good afternoon, FreeBSD enthusiasts. For FreeBSD release 6.2, does anyone
know if there is any simpler way of using sound cards containing either a
Realtek ALC262 chip or a Via ENVY24 chip than installing the Linux
emulator, and then using the alsa a.p.i.? Many thanks. Yours truly, L e e
_ S h
ppears as
if delayed by about 3 seconds, but does seem to move to a reasonable position. While
moving, the pointer disappears, and then it re-appears when the mouse is stationary.
Thanks for any clues.
Sincerely,
Lee Hinkleman
___
[EMAI
I installed XFree86, then i run XFree86 -configure, then i run XFree86
-xf86config XF86Config.new.
Everything is ok. Than i cp XF86Config.new to /etc/X11/XF86Config (i tried
to copy and to
/usr/X11R6/etc/X11/XF86Config but there is no directory X11). then, when i
run startx i get the
next error:
Just ran my weekly cvsup program followed by portsbd -Uu. Tried running
portsversion -l and received a message indicating that I should run
pkgdb -F to deal with a stale dependency. Note following:
Stale dependency: sgmlformat-1.7_2 -> docbook-3.1_2 (textproc/docbook-310):
docbook-xsl-1.62.3 (sco
I think if it were me, I would check to see if the docbook-310 port
were still
installed correctly, and if not, install it and then try pkgdb -F again.
Not sure I understanad the need to examine docbook-310. When I run
pkg_info -ro sgmlformat-1.7_2, I get the following:
Information for sgmlformat-
I am tring to run Enemy Territory using linux emulation, and the program
fails telling my it can't find libGL.so.1. I believe I need the linux
version of this library, but I don't know where to get it. Any help would
be great.
# cat /usr/ports/graphics/linux_mesa3/pkg-plist
usr/X11R6/lib/libGL.so
Is docbook-3.0_2 still registered as installed on your system? I think
that
is the one it is looking for. It is possible that when upgrading one
of the
others, that one was removed inadvertently.
No, it is not registered as installed. As a matter of fact, none of the
docbooks mentioned
are install
I normaly install from ports but wanted to over come this issue anyhow..
I cant install from /sys/standinstall it says that my vertion could not be
found on the ftp server..
?? im looking for the conf file that handles that..
Which version are you using?
In sysinstall, look in the menu ...
Opti
> Could you anyone send me the output from a normal (ie succesful)
> cvsup-ports session ? I keep getting 'killed' appearing
> Add delta 1.12 2003.08.04.10.54.02 kris
> Add delta 1.13 2003.08.16.01.56.43 kris
> Add delta 1.14 2003.10.19.07.17.46 kris
> Killed
> trinidad#
Having just sent t
Hmm... interesting. I've done everything described in man/handbook. The
drives
shows up (correctly) in dmesg and with camcontrol. So *why* will cdbakeoven
not detect the drives?
> > Could anyone point me to some documentation for cdbakeoven, or help
me
> > get started?
I did find *some* document
it would be even
better but I haven't been able to find any. The last is a
viewer for AutoCAD. I've found a couple but have no experience
with any of them. Does anyone have a suggestion.
Thanks, for you help,
Lee
_
Crave some
When I enable xdm in /etc/ttys, it starts twm by default.
With startx and xinitrc it starts whatever is there. How can the
default window manager be changed when starting with xdm?
Thanks,
_
Great deals on high-speed Internet access
Miguel,
Thanks a lot. I knew there was a simple way.
muy agradecido,
From: Miguel Mendez <[EMAIL PROTECTED]>
To: "Lee Mx" <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED]
Subject: Re: Starting KDE from ttys and xdm.
Date: Mon, 17 Nov 2003 17:28:49 +0100
begin electrogram
From: Alex de Kruijff <[EMAIL PROTECTED]>
To: Lee Mx <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED]
Subject: Re: Changing a company from 100% Windows to 100% FreeBSD.
Date: Mon, 17 Nov 2003 19:32:23 +0100
On Mon, Nov 17, 2003 at 06:27:25AM -0800, Lee Mx wrote:
> I am switching abo
From: Barry Skidmore <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: FreeBSD-Questions <[EMAIL PROTECTED]>
Subject: OpenOffice 1.1.0 Install Problem
Date: Mon, 17 Nov 2003 14:10:58 -0500
I am installing OpenOffice 1.1.0 on a system on which I just did a fresh
install of FreeBSD-4.9-RELEASE-i
From: "C. Ulrich" <[EMAIL PROTECTED]>
To: Lee Mx <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED]
Subject: Re: Changing a company from 100% Windows to 100% FreeBSD.
Date: Mon, 17 Nov 2003 15:48:24 -0500
On Mon, 2003-11-17 at 09:27, Lee Mx wrote:
> I am switching about 40 de
From: Eric F Crist <[EMAIL PROTECTED]>
You can also use the KDE login manager, see man kdm.
Thanks, Eric. I don't seem to have a manual entry for kdm but I'm going to
do some greping
and find out more about the KDE login manager.
Thanks for the start,,
ed
--
Eric F Crist
President
AdTech I
Hi there,
I just started my FreeBSD journal since last month, so please forgive me if
I ask something that is already asked and answered. Here is my problem, I
would like to setup a LAN base Radius Server that work as the following:
1. LAN Client open up their browser and try to go to http://www
I'd have to say Squirrel Mail
http://www.squirrelmail.org/
I'm partial to http://www.horde.org AWESOME
lee
_
Share holiday photos without swamping your Inbox. Get MSN Extra Storage
now! http://join.msn.com/?PAGE=f
aring this up for me.
lee
_
Set yourself up for fun at home! Get tips on home entertainment equipment,
video game reviews, and more here.
http://special.msn.com/home/homeent.armx
___
[
From: Matthew Seaman <[EMAIL PROTECTED]>
To: Lee Mx <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED]
Subject: Re: results of compiling with -lmysqlclient
Date: Thu, 27 Nov 2003 12:32:47 +
On Thu, Nov 27, 2003 at 03:39:05AM -0800, Lee Mx wrote:
> I just realized that when
From: Matthew Seaman <[EMAIL PROTECTED]>
To: Lee Mx <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED]
Subject: Re: results of compiling with -lmysqlclient
Date: Thu, 27 Nov 2003 18:27:23 +
On Thu, Nov 27, 2003 at 09:39:28AM -0800, Lee Mx wrote:
> THanks a lot, Matthew. I assumed as
From: Herculano de Lima Einloft Neto <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Subject: portupgrade overkill?
Date: Sat, 29 Nov 2003 05:16:43 -0200
Hello people,
Check this out, if you will:
]# portinstall -RPv urwfonts
Have you checked
# man portinstall
with a /-R
From: "Aaron Myles Landwehr" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: "Charles Swiger" <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED]
Subject: Re: Make world problems from 4.9 to 5.1
Date: Sat, 29 Nov 2003 05:04:40 - (GMT)
What exactly does "make world" do?...i know sometimes i acciden
MPlayer interrupted by signal 4 in module: decode_audio
- MPlayer crashed by an 'Illegal Instruction'.
It may be a bug in our new runtime CPU-detection code...
Please read DOCS/bugreports.html.
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb'
||
||
||Just checking... do you have
||
||options CPU_ENABLE_SSE
||options CPU_ATHLON_SSE_HACK
||
||in your kernel config?
||
Neither of these are set.
That could be the problem. I have an athlon and could not get mplayer
to do much of anything before I build a kernel wi
I've got both 4.9 and 5.1 loaded on my new ASUS A7N8X Deluxe
with two 160Gb disks on the primary ATA controller.
it hangs during kernel boot after the
message:
ad1: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices
Yup. I have the same thing.
What I do is go in to the BIOS a
Looks like my system is running out of free pty's. There are a bunch of
users on the system running screen, so we are using up a ton of the
ptys.
How do I find out the limit of ptys on my system? (sysctl doesn't
seem to show anything relevant.)
How do I increase that value? The pseudo-pty value in
From: "KURT BUFF" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Subject: scp between windows and freebsd
Date: Wed, 10 Dec 2003 13:50:01 -0700 (MST)
All,
I'm following the directions here:
http://www.unixwiz.net/techtips/postfix-exchange-users.html
to improve the gateway to our Exchange box, an
Recommendations welcome. I'm not sure I'm asking this in the best
place, but I know a lot of people here use CVS, and particularly the
one that comes with FreeBSD. (I run FreeBSD 4-STABLE in case it
matters.)
Thanks much.
--
Doug Lee [EMAIL PROTECTED]http://www.dl
On Sun, Dec 21, 2003 at 08:58:30PM +, Daniela wrote:
> On Sunday 21 December 2003 17:25, Doug Lee wrote:
> > I'm trying to use FreeBSD's CVS (v1.11.5) to manage DOS/Windows
> > projects, which of course means files with CR/LF line endings. The
> > docs claim
192.168.1.1/249.
All of which are illegal, /xx cannot exceed 32 in value (32 bits to a IPv4
internet address). Hence
the "bad width" error message.
-lee
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
. but an
oversight amid all that would be MUCH easier to fix if I could do the
above things.
--
Doug Lee [EMAIL PROTECTED]http://www.dlee.org
Bartimaeus Group [EMAIL PROTECTED] http://www.bartsite.com
"If you refuse to be made straight when you are green,
you will n
"Compartir el conocimiento es una accion de seres inteligentes, que han
comprobado que el conocimiento
es un bien que crece a medida que se lo comparte"
From: Jesse Guardiani <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: ZOT Print Server
Date: Tue, 30
From: Eric F Crist <[EMAIL PROTECTED]>
To: "Lee Mx" <[EMAIL PROTECTED]>,
[EMAIL PROTECTED],[EMAIL PROTECTED]
Subject: Re: ZOT Print Server
Date: Tue, 30 Dec 2003 18:30:14 -0600
On Tuesday 30 December 2003 06:23 pm, Lee Mx wrote:
> I looked quickly at the link and th
From: Eric F Crist <[EMAIL PROTECTED]>
To: "Lee Mx" <[EMAIL PROTECTED]>, [EMAIL PROTECTED],
[EMAIL PROTECTED]
Subject: Re: ZOT Print Server
Date: Tue, 30 Dec 2003 18:30:14 -0600
On Tuesday 30 December 2003 06:23 pm, Lee Mx wrote:
> I looked quickly at the li
From: Eric F Crist <[EMAIL PROTECTED]>
To: "Lee Mx" <[EMAIL PROTECTED]>,
[EMAIL PROTECTED],[EMAIL PROTECTED]
Subject: Re: ZOT Print Server
Date: Tue, 30 Dec 2003 19:42:51 -0600
On Tuesday 30 December 2003 07:22 pm, Lee Mx wrote:
> I forgot to ask in the previous ema
From: Eric F Crist <[EMAIL PROTECTED]>
To: "Lee Mx" <[EMAIL PROTECTED]>,
[EMAIL PROTECTED],[EMAIL PROTECTED]
Subject: Re: ZOT Print Server
Date: Tue, 30 Dec 2003 23:12:22 -0600
On Tuesday 30 December 2003 08:52 pm, Lee Mx wrote:
>
> The only difference between y
Is there a secret to getting kmplayer to play dvds and mpeg files? I have
mplayer, gmplayer, kmplayer all installed. If I enter mplayer
from within KDE, I get an initial image on the screen, but don't know the
keyboard shortcuts to get it to play (but I can pause it!). gmplayer and
kmplayer bot
Reading some forums, I discovered I could use the following options in
my kernel configuration (5.2):
options CPU_ATHLON_SSE_HACK
options CPU_ENABLE_SSE
I looked at the GENERIC kernel config but there were no mention of those
2 options. Where can I find an exhaustive list of available
options/devic
tting a cookie, but thats
> just a guess ... could it be OS related?
Is your Mailman web interface served over https? If so, you might want
to check that DEFAULT_URL_PATTERN is set correctly in mm_cfg.py, for
instance:
DEFAULT_URL_PATTERN = 'https://%s/mailman/'
--
Benjamin Lee
signature.asc
Description: OpenPGP digital signature
To get libxml2 reinstalled before the port is bumped you'll want to try
'make -DDISABLE_VULNERABILITIES reinstall'.
In general, it's easier to use portupgrade(1). See "Using the Ports
Collection"[1] in the FreeBSD Handbook.
[1]
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ports-using.html
--
Benjamin Lee
signature.asc
Description: OpenPGP digital signature
Is there any way that I can gain root? I know the root password and
> everything, but I just can't get to it. The user is not in the wheel
> group, and root login is disabled in SSH.
>
> Thanks for any help/advice.
Login as the unprivileged user and run:
$ su
See su(1).
--
nd hacking V4L into
the FreeBSD kernel. That's why I eventually made the decision to run
MythTV on Linux, even though I'd *much* rather administer a machine
running FreeBSD.
--
Benjamin Lee
signature.asc
Description: OpenPGP digital signature
from scratch (pkg_delete -af please) when upgrading between
> major FreeBSD versions (e.g. 6.x -> 7.x).
Is there a particular reason that you recommend using pkg_delete? I
just did 'portupgrade -aRf' for my 6.2 -> 7.0 upgrades.
--
Benjamin Lee
http://www.b1c1l1.com/
sig
eed to make to get the
> port to complie in the patch file?
You should read the FreeBSD Porter's Handbook [1]. In particular,
you'll probably be interested in section 4.4, "Patching" [2].
[1]
http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/index.html
[2]
http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/slow-patch.html
--
Benjamin Lee
http://www.b1c1l1.com/
signature.asc
Description: OpenPGP digital signature
it
> therefore I would like to downgrade ports to try install an older version.
>
>
> Any advise?
See portdowngrade(1) -- it doesn't do what you think it does. Use it to
fetch an earlier version of the port and then reinstall it however you
wish, e.g. using portupgr
ell R900 with 4 CPU, 64GB RAM
> ESX 4.0 installed on R900
> FreeBSD 7.2 amd64
>
> What is this mean?
Did you create the guest with a 64-bit CPU?
--
Benjamin Lee
http://www.b1c1l1.com/
signature.asc
Description: OpenPGP digital signature
Dear Sir,
I would be a FreeBSD open source committer.
But I don't know how to do.
Could you teach me ?
Best regards.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
s Use Netif Expire
> localhost link#11UH 00lo0
[...]
What happens if you run 'route add default 192.168.1.1' instead of DHCP?
What is the output of '/etc/rc.d/routing restart'?
--
Benjamin Lee
http://www.b1c1l1.com/
signature.asc
Description: OpenPGP digital signature
ture well
enough to understand whether this patch represents a bugfix or a
workaround of some local configuration issue. Has anyone run into this
issue before? If this is a config issue, any hints on what might be
going on or how to dope it out?
Thanks for your help,
Lee Thomas
The details:
#date
Freebsddiary.orgface="Verdana, sans-serif"> Team,
I
thought you might like to know some reasons why you are not getting
enough Social Media and Organic search engine traffic
for Freebsddiary.org
1. Your
website Freebsddiary.org is
not ranking top in Google organic searches for many competitive
style="font-style:normal">Freebsddiary.org style="font-style:normal">style="font-weight:normal">Team,
style="font-weight:normal">I
thought you might like to know some reasons why you are not getting
enough Social Media and Organic search engine traffic fo
t, and I would not be
surprised if it won't work with VMWare either.
Lee
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Thu, 2006-02-09 at 14:32 +1030, Brian Astill wrote:
> Greetings, all.
> Can anyone help with this issue?
>
Please don't cc: moderated lists when posting to public lists.
"You are not allowed to post to this mailing list, and your message has
been automatically rejected. If you think that you
Hi all
I'm currently running FreeBSD.4.11-p14 on by box at home.
Yesterday, I tried to update its ports collection (I mean /usr/port)
with cvsup, then installed Firefox but I can't. "make install clean"
returned me with error.
--- snipped of my supfile ---
*default host=cvsup2.jp.freebsd.org
*
From: Kris Kennaway <[EMAIL PROTECTED]>
To: Supote Lee <[EMAIL PROTECTED]>
CC: freebsd-questions@freebsd.org
Subject: Re: How to update port collection properly ?
Date: Thu, 9 Mar 2006 22:16:49 -0500
On Fri, Mar 10, 2006 at 03:13:56AM +0000, Supote Lee wrote:
> Hi all
>
nfamiliar with how all of these can happen while my actual
Internet connection (and other TCP connections for example) seems
fine, I am wondering if any of this could represent a security
issue--packet snooping/redirection/"man-in-the-middle" attacks, etc.
Thanks in advance for any i
Good morning dear person at FreeBSD questions. I am trying to install
FreeBSD 5.3 on a Compaq Proliant 5000 with multiple Pentium Pro processors
and SMART-SCSI 2/P hardware RAID array. It contains a flash-ROM BIOS. The
BIOS does not follow the conventions of fixed-ROM BIOSes such as are
install
. I am unable to find, in the man
page for this pseudo-device-driver, the acronym to insert into the
configuration file to have it loaded into the operating system. Any
suggestion is appreciated. Thank you. Yours truly, Lee Shackelford
___
freebsd
I am in a small lan and want to use fb 6.0 as a router to share internet
access. I use mpd 3.18 to dial adsl on demand. I configured ipnat with :
map rl0 10.0.0.0/8 -> 0.0.0.0/32 portmap tcp/udp auto
map rl0 10.0.0.0/8 -> 0.0.0.0/32
And then I use my client compute(windows 2000 Pro) to acces
Nikos, thank you. I appended " mssclamp 1440 " in ipf.rule, it works
now! And I have tried not use it but add "set link mtu 1440" in mpd.conf, and
failed. Yes, the problem occurs when NATing, and mssclamp 1440 is the key.
fbsd, thank you anyway.
Arnol
The message I get is:
httpd cannot start
I cannot find the file you mention.
There is no apache dir. there
usr/local/etc/apache has no error log
> >
> >!DSPAM:40d111b0915279889095524!
>
> LW:
>
> What is the output of: /usr/local/apache/bin/apachectl start
>
> Also, paste the output of: tail -10
The error log is as follows:
[Sun Jun 13 18:18:32 2004] [alert] mod_unique_id: getaddrinfo failed for
"Ginger.Osoleon" (hostname nor servname provided, or not known)
[Mon Jun 14 03:15:48 2004] [alert] mod_unique_id: getaddrinfo failed for
"Ginger.Osoleon" (hostname no
Dear All,
I installed a clean 4.10-RC2 and CVSUP to the latest,
while makeing world, I encountered this error
and tried a few times but same error. Please advise.
I'm using a P4 2.8Ghz 1U server system.
>>> stage 1: bootstrap tools
--
cd
Dear All,
I installed a clean 4.10-RC2 and CVSUP to the latest,
while makeing world, I encountered this error
and tried a few times but same error. Please advise.
I'm using a P4 2.8Ghz 1U server system.
>>> stage 1: bootstrap tools
--
cd
hi, i have 7 ips on one box, however they can't connect internally
to each other IP ports. please advise.
here's my setup:
rc.conf:
defaultrouter="63.223.65.1"
ifconfig_sis0="inet 63.223.65.192 netmask 255.255.255.0"
/etc/ips.added:
ifconfig sis0 inet 63.223.65.193/32 alias
ifconfig sis0 inet 6
Why does it always coredump?
Connecting to cvsup3.jp.FreeBSD.org
Connected to cvsup3.jp.FreeBSD.org
Server software version: SNAP_16_1h
Negotiating file attribute support
Exchanging collection information
Establishing multiplexed-mode data connection
Running
Updating collection src-all/cvs
make bu
EMAIL PROTECTED]:/root] uname -a
FreeBSD spock.dilkie.com 4.10-STABLE FreeBSD 4.10-STABLE #0: Sat Jun 19 15:16:03 EDT
2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SPOCK i386
Any ideas??? Does anyone need more info?
-lee
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
:22, Joey Mingrone wrote:
>> -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA1
>>
>> You're not alone. I'm seeing the same problem on my FreeBSD systems.
>>
>> Joey
>>
>> On July 1, 2004 17:11, Lee Dilkie wrote:
>> > Well, I&#
>-Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of Joey Mingrone
>Sent: Thursday, July 01, 2004 4:35 PM
>To: [EMAIL PROTECTED]
>Cc: Bruce Hunter
>Subject: Re: portupgrade fails on every port, undefined method 'each'
>fornil:NilClass
>
>
>-BEGIN PGP SIGNED
dear all,
i'm using a freebsd 4.10-stable server with 50 IP addresses.
Is there any program i can install that will be able to tell me:
- how much bandwidth (ie. kbps) each individual IP is using?
trafcount seems to count total traffic only, any idea?
thanks.
John
_
i'm getting flooded by these errors in /var/log/messages
Jul 9 21:10:03 web /kernel: arpresolve: can't allocate llinfo for
63.23.70.1rt
Jul 9 21:10:04 web /kernel: arpresolve: can't allocate llinfo for
63.23.70.1rt
Jul 9 21:10:05 web /kernel: arpresolve: can't allocate llinfo for
63.23.70.1rt
Ju
I have set FBSD up on an old pentium II MMX 233 MHZ machine and everything
works fine except for the mouse (serial). When using X the mouse behaves
crazy i cant get it to move in any useful way.
Ive checked and checked and found: edit /etc/XF86Config and
set Protocol to "Sysmouse" and Device to
I've got a corrupted drive which i am unable now to clear. Whenever i
try to fdisk it then relabel it i get an error that partition c does not
cover the entire disk and that this might interfere with system utilities.
I've tried:
dd if=/dev/zero of=/dev/ad1 bs=512 count=1
and various combinatio
hi, is there anyway i can stop receiving these errors
Jul 10 10:00:40 web /kernel: arplookup 63.171.211.198 failed: host is not on
local network
Jul 10 10:02:37 web last message repeated 82 times
--
thx
john
___
[EMAIL PROTECTED] mailing list
http://li
Convert the /[/ to /\[/ and see if that works. Generally brackets mean a
character class in perl regexs. You could also use single quotes. E.g.
split('[', $line).
Good luck,
Lee
> -Original Message-
> From: Steve Bertrand [mailto:[EMAIL PROTECTED]
> Sent: Friday, Jul
On 2004-08-03, Maksym Marchenko <[EMAIL PROTECTED]> wrote:
> And what you can do with "headless" PC? Can you control this PC only in
> command prompt? Or (may be) you can use anything like X - twm?
>
Sure. You would use the headless machine to run X clients.
I have a headless PC that serves X se
On 2004-08-03, Steve Kargl <[EMAIL PROTECTED]> wrote:
> Anyone have a tip on using rrestore with ssh instead
> of the rexecd and rcmd facility? My attempts at using
> rrestore result in
>
> dhcp-78-74:kargl[207] rrestore -x -b 64 -f troutmask:/dev/nsa0
> Connection to troutmask.apl.washington.edu
have seen.
I'm asking the list because, if this works, I'll probably buy a box
just like it for myself.
Please Cc me directly.
--
Doug Lee [EMAIL PROTECTED]http://www.dlee.org
Bartimaeus Group [EMAIL PROTECTED] http://www.bartsite.com
"The best executive is
PPPoE, I was
using mpd. I use ipfw/natd for firewalling and NAT. I can surely
provide more details to anyone who needs them.
Please Cc me on replies (I hope this is not rude to ask; I'm just
afraid of missing answers).
Thanks much.
--
Doug Lee [EMAIL PROTECTED]http:
On Mon, Dec 27, 2004 at 07:30:41PM -0600, Dan Nelson wrote:
In the last episode (Dec 27), Doug Lee said:
> I use FreeBSD 4.10-STABLE as a nat/firewall box. When connected to
> DSL, I got fast web surfing but many gaps in incoming audio traffic
> using some audio software. I switched
I'll need paragraphs, bold, italics,
superscripts for TM, and hyperlinks, but probably not much more.
I think I would use an entity ref for TM. For example in
html it would be ™
_
FREE pop-up blocking with the new MSN Toolbar - get it
In fact I have converted my mp3 files to wav following a tutorial I
found on the net -using mplayer too-
I just want to burn them and I thought this was the way (1st create an
ISO, 2nd burn the ISO)
Anyway I have the same problem:
192# burncd -t -f /dev/acd0 audio *.wav fixate
Well... I am going t
Any help is greatly appreciated. Thank you.
Best regards,
Lee Hanxue
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
i was clearing out some files in /usr and accidentally did something and
now
command such as: clear, make, whereis no longer work ... how can i get
them
back to working ?
You could try doing an upgrade from the CD.
/stand/sysinstall
If you have a working system, you could try copying the
files
> >i was clearing out some files in /usr and accidentally did something
and
> >now
> >command such as: clear, make, whereis no longer work ... how can i get
> >them
> >back to working ?
>
> You could try doing an upgrade from the CD.
>
> /stand/sysinstall
Will this change any of the all ready in
Any help is greatly appreciated. Thank you.
Best regards,
Lee Hanxue
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I want to install FreeBSD 5.2R within Bochs.
I inserted FreeBSD bootable CD , and created a new 500Mb image file
for virtual HD via bximage.exe tools.
When I dedicated bochs boot from cd-rom , it seems un-bootable.
Alternatively, I copied boot.flp to Bochs folder and booted from
virutal flop
all.
On Fri, Feb 25, 2005 at 10:09:14PM -0800, Michael C. Shultz wrote:
On Friday 25 February 2005 09:26 pm, Doug Lee wrote:
> System: FreeBSD-STABLE (4.10). Ports updated recently, but I've had
> trouble with the database and probably never straightened it out.
>
> Problem: &quo
On Sat, Mar 12, 2005 at 01:58:58PM -0800, Michael C. Shultz wrote:
On Saturday 12 March 2005 12:16 pm, Doug Lee wrote:
> You said simply to try sysutils/portmanager. I must have really made
> a mess here:
>
> Kirk 3# po
ncyDir, "\n" ) - portDependencyDir;
(gdb) print portDependency
$1 = 0x8050049 "cclient-2001a,1"
(gdb)
Core size 417 K. If you need it, I'll email it privately. I doubt
there's anything compromising in there...
--
Doug Lee [EMAIL PROTECTED]http://www.d
I think there is no big difference between just running portupgrade vs
portmanager. I would say portmanager is better and faster because you
don't need to baby sit, it is really automagical, and there is no
messing with an index.
I keep hearing great things about portmanager, but I have
not been
> I keep hearing great things about portmanager, but I have
> not been able to run it... when I try, I get:
>
>
> # portmanager -s
> -
>--- PMGRrStatus 0.2.9_3 info: Creating inital data bases
>
day-to-day activities on this old
box. I'm hoping the unicode evasion will help with that, though I
don't know how likely this is.
Please Cc replies to me.
Thanks much for any advice.
--
Doug Lee [EMAIL PROTECTED]http://www.dlee.org
Bartimaeus Group [EMAIL PROTECTED]
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/multimedia.html
http://www.google.com/search?q=mixer%3A+%2Fdev%2Fmixer%3A+Device+not+configured
_
Express yourself instantly with MSN Messenger! Download today it's FREE!
http:
Hi All,
When I try to boot from CD-ROM to install my FreeBSD 4.8 i386
my computer stops to work. I do:
1) Booting from CD-ROM
2) Skip kernel configuration.
3) Then I see:
[...something before...]
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: on ppc0
plip0: on ppbus0
[That is all. Now he stop
kaudiocreator is a nice program for extracting audio tracks and
converting them w/ almost any encoder. Only pittfall is hat kde is
needed.
Is there another program that comes close to the abilities and easy of
use of this kaudicreator?
I have actually had some trouble with kaudiocreator lately
(ta
1 - 100 of 480 matches
Mail list logo
