Hello all
I currently have machine with 6x500gb hdd`s running under ZFS RaidZ
everything is working just fine, I have bought 2x3bay ICY Dock bays for
this machine, my questions is do I have to make sure the drives go back
on to the same sata ports as they are currently on or will ZFS sort it
se
-Original Message-
From: krad [mailto:kra...@googlemail.com]
Sent: 04 November 2009 09:19
To: Steve Polyack
Cc: Derrick Ryalls; FreeBSD Questions
Subject: Re: ZFS disk replacement questions
2009/11/3 Steve Polyack
> Derrick Ryalls wrote:
>
>> On Tue, Nov 3, 2009 at 10:21 AM, Steve Pol
Hi List
I have encountered a problem with samba and I cant seem to find a
solution to it.
I re-installed my 3 BSD servers over the last week and am now running
8.0 amd 64.
I`ll use the machine names as it will make it less confusing to explain,
Proteus AMD64 3500+ 4GB 3 x 500GB ZF
Hello List
Having upgraded to FreeBSD 8.0 everything is running fine, I decided to
try the ahci_load="YES" in /boot/loader.conf
The first machine was fine after a reboot,
zpool status
pool: tank
state: ONLINE
scrub: scrub completed after 0h14m with 0 errors on Thu Dec 10 07:19:
I am trying to get ezjail running on bds 8.0 and I keep hitting the same
wall
FreeBSD amalthea.galaxy.lan.lcl 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Sat
Nov 21 15:02:08 UTC 2009 /usr/obj/usr/src/sys/GENERIC amd64
I have update /usr/src using csup
When I issue a ezjail-admin update -ip
Hi
Hope everyone had a good new year, sorry I am going to have to stress
your brains this early in 2010.
I have been trying for a day or two to get
/usr/ports/multimedia/handbrake to install on 8.0-Release AMD64, the
port just stops bleating about wanting i386, I did some googling and
foun
:48
To: Graeme Dargie
Cc: freebsd-questions@freebsd.org
Subject: Re: This could be a wild goose chase but ...
On Sat, Jan 02, 2010 at 02:03:10PM -, Graeme Dargie wrote:
> Hi
>
> I have been trying for a day or two to get
> /usr/ports/multimedia/handbrake to install on 8.0-Releas
Hello All
I thought I would just give you an update and solution to a problem I
was having with the above.
Basically the machine would show no hard disks when AHCI driver was
loaded, with the following showing up at boot.
ahcich0: Poll timeout on slot 0
(aprobe0:ahcich0:0:0:0): SIGNATURE:
error log has this
2012-03-02 18:20:09: (mod_fastcgi.c.2699) FastCGI-stderr: PHP Fatal error:
Call to undefined function mssql_connect() in /usr/local/www/data/
Php -m shows mssql as installed.
Regards
Graeme Dargie
___
freebsd-questions@freebsd.org
Graeme Dargie => To
'freebsd-questions@freebsd.org' :
GD> I am just looking for some advice or hints if anyone has a clue how to make
a FreeBSD server running lighttpd + php5 connect to an instance of MS SQL 2008
R2.
GD>
GD> I have already installed php-extensions for mssql
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Bruno Comerci
Sent: 09 March 2012 04:56
To: freebsd-questions@freebsd.org
Subject: Suggestion
Hi guys.
Instead of wasting your time and man power, why wont you join
Been here ... cursed that, your TV is not seeing the folders directly at least
not in the traditional sense, it is likely that it is using WMP as a DLNA
server which will transcode the media in to a format that your TV can play by
streaming.
You solution is in ports /net/serviio
You can find
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Arthur Chance
Sent: 14 March 2012 10:27
To: FreeBSD
Cc: Carmel
Subject: Re: Making Music / Video folders on FreeBSD visible on HD TV
On 03/13/12 19:54, Carmel wrote:
>
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Karel Miklav
Sent: 30 March 2012 16:39
To: freebsd-questions@freebsd.org
Subject: Printer recommendation please
Could you please recommend me a home printer that works
I have a problem with Samba, well I "think" it is samba as one machine I have
access to when I try to perform an action like create a new folder in my home
folder windows spouts that I need permission and would I like to try again.
I guess some background would be useful at this point, I have 3
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Kaya Saman
Sent: 04 June 2012 02:07
To: freebsd-questions@freebsd.org
Subject: Strange case of vanishing disk
Hi,
this is a very strange issue but I guess will either
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Wojciech Puchar
Sent: 07 July 2012 14:50
To: FreeBSD
Subject: Re: GUI for "gpart"
> I have heard, although I never personally saw it, a GUI for "gpart" I
> heard that
Hi All,
I have been given a laptop to look at for a friend, the hard disk is close to
death with a SMART error on POST. My initial thought was to just mount it on an
Windows 7 machine and grab what I can from the drive. No joy Windows insists
that the partition is RAW and I need to format it. I
Hello list,
I have tried putting this on the samba mail list seems that no knows or is
willing to share, having got good help with freebsd on here before, I figured
its worth a shot, apologises if it is not 100% OT.
I am sure this has been asked a million times but here goes for +1
I am
-Original Message-
From: Andi Anton [mailto:phpw...@yahoo.com]
Sent: 25 March 2011 08:19
To: freebsd-questions@FreeBSD.org
Subject: BTX loader - cant find sources
Hi guys,
Can you tell me, please, where can I found the sources for the freeBSD BTX
bootloader?
I have some BIOS SATA hd
Hi All,
I went back to a machine today that I think I had partially got samba 3.5
installed on, I need to get krb5 on so I can add the system to my AD domain.
Clearly on my previous attempt I got something wrong, but I am not overly sure
how to go about fixing this problem below, I don't need p
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Chris Hill
Sent: 27 May 2011 02:16
To: Gary Gatten; Chuck Swiger
Cc: 'questi...@freebsd.org'
Subject: Re: RAM needed for DHCP + router?
On Thu, 26 May 2011, Gary Gatten
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Robert
Sent: 17 June 2011 00:06
To: Chuck Swiger
Cc: freebsd-questions@freebsd.org
Subject: Re: OT: Strange memory reading (hardware)
On Thu, 16 Jun 2011 15:11:22 -0700
Hi All
I am sure there is a simple answer to this but I google has not overly helped.
I am trying to mount a samba share that is on a FreeBSD 8.2 server to another
FreeBSD 8.2 server,
Mount_smbfs -I //user@host/share /mountpoint
It then asks for a password, I enter the users password and then
Has anyone any experience with this media streaming port, their forums are
helpful but largely if you are using linux / os X / win, not much on FreeBSD?
Feel free to discuss off list if you feel it to be more appropriate.
Regards
Graeme
___
freebsd-que
Hi All
Must be a year or so ago I posted looking for some advice on media streaming
software that had a some specific requirements, mainly that it would transcode
media on the fly to an MPEG2 stream so the dlna enabled TV could display the
stream, I did get some good advice at the time but ulti
Hi All,
I have a system that is being problematic, I suspect but I cannot say for sure
it is maybe related to ZFS as I have a fairly large ZFS pool on the machine.
The system will just lock up, local console does not respond to the keyboard,
num lock still changes the led on the keyboard, the s
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Daniel Staal
Sent: 18 September 2011 22:59
To: 'freebsd-questions@freebsd.org'
Subject: Re: System locking up.
--As of September 18, 2011 2:29:20 PM +01
Ok this might be a bit of a newbie question but here goes.
I have a large number of directories around 300 which all have sub dirs, some
of those have sub dirs in each of these there are two further sub dirs called
pages and thumbnails, is there an easy way to remove all the pages and
thumbnai
Hi All
I have spent a good while looking for a utility that needs to perform a very
specific task, I need to take a zip file and convert it in to self-extracting
archive that can be distributed to Windows client machines.
There are some specific requirements that it has to fulfil:-
Specify the
Hi All
Upgraded 3 machines today from 9.0 to 9.1 all three run ZFS as a storage but
not as a boot file system. One machine out of the three ended up with a very
sick looking ZFS pool, not a big deal as this machine is a backup mirror for
another system. So I did a zpool destroy tank then zpool
DD image,
there was another package that works on the command line but I cannot recall
the name of it just now. Your success rate will depend on the type of data you
are trying to recover, from experience foremost works better on certain types
of files.
Regards
Graeme Dargie
-Original
Hi list,
I am trying to help a friend who is overseas install FreeBSD 8.0 i386.
Left to his own devices the install failed, so I ran through it with him
last night, all is fine till it gets to the root password screen where
the install just hangs. He is not very techy, all I could glean was th
-Original Message-
From: Mike Clarke [mailto:jmc-freeb...@milibyte.co.uk]
Sent: 22 December 2010 21:46
To: freebsd-questions@freebsd.org
Subject: Which network driver for RTL8211 or 8201 NIC's?
I need to replace a failing motherboard. I'm aiming to keep the existing
Athlon CPU so I'm
Hello List,
I am trying to get FreeBSD to serve up coldfusion based pages, from what
I have managed to find on google I need Apache tomcat, which I have
managed to install ok. I am doing this on a VM first so I don't mess up
my current servers. This is not for a production environment, I just
w
-Original Message-
From: Bahman Kahinpour [mailto:bahman.li...@gmail.com]
Sent: 24 January 2011 11:40
To: freebsd-questions@freebsd.org
Subject: Onboard SATA Controller of Intel DH55HC Motherboard (FreeBSD 7.3 &
FreeBSD 8.1)
Hello FreeBSD people all over the world,
There is an onboard
Now I know I am going to get hung out to dry on this one, but I am
having a problem with Jon Radel and his encrypted mails to this list. I
cannot open them, I cannot get his address from the mail to talk to him
directly, or get the address so I can filter it. Yes it is not the end
of the world, b
-Original Message-
From: Chris Rees [mailto:utis...@gmail.com]
Sent: 14 February 2011 10:11
To: Mario Lobo
Cc: FreeBSD
Subject: Re: CPU heating!
On 13 Feb 2011 23:06, "Mario Lobo" wrote:
>
> Hi;
>
> I am following 8-CURRENT AMD64. I have a Phenom II 955. Up to the 3rd week
of
> January
Firstly I know this is a bit off topic for this list, please accept my
apologies in advance. I have tried asking in more relevant circles but I have
had no responses at all.
Under pfSense I have openVPN running and Squid, the vpn has rules to route
traffic on ports 119 and 563 via the VPN conne
Discover it alone. I told already enough about it but it results in attacks
from ZFS (and general "new technology") fanatics.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Gordon Cox
Sent: 12 August 2012 07:31
To: customer
Subject: Hi!
Hello customer,
You don't have to reply, this is a test.
I have a new website someurl.com
You are welc
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Robert Bonomi
Sent: 24 August 2012 03:30
To: freebsd-questions@freebsd.org
Subject: harware compatibility queustion
I need to add "more than two' internal SATA _ports_
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Olivier Nicole
Sent: 25 October 2012 10:21
To: freebsd-questions@freebsd.org
Subject: FreeBSD based, standalone, print server
Hi,
The network card on my HP 4300 is def
Hello List,
I understand this is possible but cant seem to find any how to`s or
guides out on the net, I would like to set up a jail running FreeBSD 8.0
i386 on a system that is running FreeBSD 8.0 amd64. I know this may
sound somewhat odd but I have a program that I need to run that just
will
-Original Message-
From: mailinglist [mailto:mailingl...@ucwv.edu]
Sent: 11 March 2010 01:36
To: freebsd-questions@freebsd.org
Subject: Replacing Home Router With PC
I've got an old Linksys router hanging off of my cable modem that is
several years old and is about to die (very poor wir
Hello All
I have an issue with freebsd-update, I will back track a few steps to
give you some background as to what I was doing prior to using
freebsd-update.
I have been trying to get half-life dedicated server working on one of
my machines, seemed to install ok from games/linux-steam but
-Original Message-
From: William E. Moreno A. [mailto:wmore...@yahoo.com]
Sent: 26 April 2010 01:44
To: questi...@freebsd.org
Subject: HP Proliant ML 150 G5
I tried to install FreeBSD 8.0 AMD64 on an HP Proliant ML 150 G5 Intel Xeon
quad core but fails. With CentOS 5.4 the installation
Hi all
Ok lets not go to war over this I just need some advice.
I have a 1u rack system that has one of these motherboards
http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DPR-iG2+.cfm
Now according to where I got the server and that page it is supposed to
have dual gigabit n
-Original Message-
From: Graeme Dargie [mailto:a...@tangerine-army.co.uk]
Sent: 02 June 2009 21:56
To: freebsd-questions@freebsd.org
Subject: Intel NIC issues
I opened the case and the motherboard does not match what was supposed
to be in the machine. I will contact the supplier and
-Original Message-
From: Paul B. Mahol [mailto:one...@gmail.com]
Sent: 30 June 2009 23:49
To: Stefan Miklosovic
Cc: freebsd-questions@freebsd.org
Subject: Re: s...@home
On 6/30/09, Stefan Miklosovic wrote:
> hi all,
>
> I would like to install s...@home client to my machine,
> There ar
Hello List.
I was trying to install VLC server from ports, all seemed simple enough
till it got to the ffmpeg port, where it stops compiling with the
following errors. Your help is greatly appreciated.
===> Building for ffmpeg-2008.07.27_11
cc -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BI
-Original Message-
From: Peter [mailto:peterp...@aboutsupport.com]
Sent: 08 July 2009 05:25
Cc: freebsd-questions@freebsd.org
Subject: Re: VLC server
Graeme Dargie wrote:
> Hello List.
>
Hi,
try upgrading the ports tree.
-Original Message-
From: Peter [mailto:peterp...@aboutsupport.com]
Sent: 08 July 2009 09:07
To: freebsd-questions@freebsd.org
Subject: Re: VLC server
Graeme Dargie wrote:
> I did that before I started the install.
>
> Regards
>
> Graeme
>
>
As a workaround,
Hi All,
I have a server in the house that has been running away fine, I noticed
today that it had rebooted 17hours or so ago, looking a little further
it also looks like it had rebooted around 23hours previously.
panic: kmem_malloc(131072): kmem_map too small: 505761792 total
alloc
I have been trying on and off to set up postgresql for undernets
gnuworld services for ircd.
Now according to the instructions below this should build with tcl
support and you should end up with the following file
/usr/local/pgsql/bin/pgtclsh
Except you dont.
Instructions
freebsd:
Hello,
I have built a machine with a Gigabyte GA-MA74GM-S2, running Freebsd
7.1. For the most part it is fine but I do have two problems
1) The NIC a realtek 8111C keeps giving watchdog timeout messages
and the link state changes from up to down and back to up again.
2) The
.org
Subject: Re: Motherboard support
On Tue, 2009-01-20 at 22:58 +0000, Graeme Dargie wrote:
> Hello,
>
>
>
> I have built a machine with a Gigabyte GA-MA74GM-S2, running Freebsd
> 7.1. For the most part it is fine but I do have two problems
>
>
>
> 1) Th
I have just had several days of issues with an SB700 chipset and drives
not behaving nicely with it. Try setting the bios to ACHI mode this
worked for me but I was not using the raid as a boot disk I merely
wanted access to all 6 sata ports on the gigabyte board.
Regards
Graeme
-Original Mes
Having upgraded my motherboard I have discovered that healthd does not
like the chipset as the values it is producing are way out eg cpu temp
255c, I wonder if anyone can recommend a good more upto date alternative
that would work with phpsysinfo or mrtg ?
Regards
Graeme
__
If you do a dmesg are you also showing a watchdog time out for the nic ?
I only ask as I am having the exact same problem with the exact same card and I
have yet to find a solution, if I come across something I will let you know.
Regards
Graeme
-Original Message-
From: FreeBSD [mailto:f
-Original Message-
From: Morgan Wesström [mailto:freebsd-questi...@pp.dyndns.biz]
Sent: 28 January 2009 13:27
To: FreeBSD Questions
Subject: Is there a trick to boot 7.1 install CD with USB keyboard?
Dell OptiPlex 745 - no PS/2 connectors.
USB keyboard works on boot menu but during ker
-Original Message-
From: FreeBSD [mailto:free...@optiksecurite.com]
Sent: 04 February 2009 21:55
Cc: freebsd-questions@freebsd.org
Subject: Re: Link UP/DOWN problem with re0 on FreeBSD 7.1
FreeBSD a écrit :
> Graeme Dargie a écrit :
>> If you do a dmesg are you also showing a
-Original Message-
From: FreeBSD [mailto:free...@optiksecurite.com]
Sent: 06 February 2009 16:47
To: Graeme Dargie
Cc: freebsd-questions@freebsd.org
Subject: Re: Link UP/DOWN problem with re0 on FreeBSD 7.1
Graeme Dargie a écrit :
> -Original Message-
> From: F
-Original Message-
From: FreeBSD [mailto:free...@optiksecurite.com]
Sent: 10 February 2009 17:22
To: Graeme Dargie
Cc: freebsd-questions@freebsd.org
Subject: Re: Link UP/DOWN problem with re0 on FreeBSD 7.1
Graeme Dargie a écrit :
>
> -Original Message-
> From
-Original Message-
From: Elliot Finley [mailto:efinleyw...@efinley.com]
Sent: 05 March 2009 17:57
To: Christopher Key
Cc: questi...@freebsd.org
Subject: Re: SATA Port Multipliers in FreeBSD (6.3)
Christopher Key wrote:
> Hello,
>
> I'm looking to substantially expand the storage on my
-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
You could try re-seating the ram should be located in one of the hatches on the
underside of the unit, its fr
-Original Message-
From: APseudoUtopia [mailto:apseudouto...@gmail.com]
Sent: 14 April 2009 20:23
To: FreeBSD Questions
Subject: 7.1 System Crashing
My FreeBSD 7.1-RELEASE-p3 system has gone down a few times in the last
two days. I'm trying to figure out why, but there is nothing in
/va
-Original Message-
From: Glen Barber [mailto:glen.j.bar...@gmail.com]
Sent: 18 May 2009 22:58
To: lcon...@go2france.com
Cc: freebsd-questions@freebsd.org
Subject: Re: dell broadcom nic & fbsd 7.1 AMD64
On Mon, May 18, 2009 at 5:37 PM, Len Conrad wrote:
>>
>>Could you paste the output o
-Original Message-
From: Howard Jones [mailto:howard.jo...@network-i.net]
Sent: 25 May 2009 14:58
To: freebsd-questions@freebsd.org
Subject: FreeBSD & Software RAID
Hi,
Can anyone with experience of software RAID point me in the right
direction please? I've used gmirror before with no
Hi All
I am trying to update 2 7.1 systems to 7.2.
sun3# freebsd-update upgrade -r 7.2RELEASE
Looking up update.FreeBSD.org mirrors... 2 mirrors found.
Fetching metadata signature for 7.1-RELEASE from update4.freebsd.org...
done.
Fetching metadata index... done.
Inspecting system... done.
-Original Message-
From: Wojciech Puchar [mailto:woj...@wojtek.tensor.gdynia.pl]
Sent: 25 May 2009 18:09
To: FreeBSD-Questions@freebsd.org
Cc: Howard Jones; Graeme Dargie; Valentin Bud
Subject: Re: FreeBSD & Software RAID
>
> I have looked at ZFS recently. Appears to be a
-Original Message-
From: Wojciech Puchar [mailto:woj...@wojtek.tensor.gdynia.pl]
Sent: 25 May 2009 18:54
To: Graeme Dargie
Cc: FreeBSD-Questions@freebsd.org; Howard Jones; Valentin Bud
Subject: RE: FreeBSD & Software RAID
> Ok granted this is a server sat in my house and it i
-Original Message-
From: ill...@gmail.com [mailto:ill...@gmail.com]
Sent: 25 May 2009 22:39
To: Graeme Dargie
Cc: freebsd-questions@freebsd.org
Subject: Re: updating from 7.1 to 7.2 AMD64
2009/5/25 Graeme Dargie :
> Hi All
>
> I am trying to update 2 7.1 systems to 7.2.
>
-Original Message-
From: Wojciech Puchar [mailto:woj...@wojtek.tensor.gdynia.pl]
Sent: 26 May 2009 02:20
To: Graeme Dargie
Cc: ill...@gmail.com; freebsd-questions@freebsd.org
Subject: RE: updating from 7.1 to 7.2 AMD64
>> I am trying to update 2 7.1 systems to 7.2.
>>
&
Hello List,
I was wondering if anyone out there knew of a port that is capable of
doing media streaming to a LCD TV which is apparently DLNA compliant.
I currently have a FreeBSD 8.0 machine which runs ushare with all my
media on it, which works a treat with an xbox 360 and also (sorry)
win
-Original Message-
From: Carl Chave [mailto:c...@chave.us]
Sent: 27 May 2010 00:48
To: Graeme Dargie
Cc: freebsd-questions@freebsd.org
Subject: Re: Media streaming
Graeme,
No answer from me unfortunately, but, possibly mediatomb?
I had a question for you about ushare though - I use
-Original Message-
From: Dale Scott [mailto:dalesc...@shaw.ca]
Sent: 27 May 2010 20:23
To: Graeme Dargie; freebsd-questions@freebsd.org
Subject: RE: Media streaming
> ... So I am search of a media
> server that can transcode from native format to MPEG2 on the fly that
>
From: Adam Vande More [mailto:amvandem...@gmail.com]
Sent: 28 May 2010 01:25
To: Graeme Dargie
Cc: freebsd-questions@freebsd.org
Subject: Re: Media streaming
On Thu, May 27, 2010 at 6:14 PM, Graeme Dargie
wrote:
Okies well so far I have tried mediatomb, the TV sees the server but
-Original Message-
From: James Phillips [mailto:anti_spam...@yahoo.ca]
Sent: 28 May 2010 18:23
To: freebsd-questions@freebsd.org
Subject: RE: Media streaming
> Date: Fri, 28 May 2010 00:14:09 +0100
> From: "Graeme Dargie"
> Subject: RE: Media streaming
-Original Message-
From: Jerry Bell [mailto:je...@nrdx.com]
Sent: 18 June 2010 06:11
To: freebsd-questions@freebsd.org
Subject: Need help with SATA disk timing out in 8.1 Beta
I am having all sorts of problems with drives in a new server.
I have a 450G sata drive that hold my root parti
Something caught my eye on a dmesg output the other day, and it got me
wondering if this was going to cause me a problem in the near future.
ad4: 476940MB at ata2-master SATA300
ad8: 476938MB at ata4-master SATA300
I had a check of another machine I have with the same make and model of
h
To all who replied to this, I just have to say I have not laugh so hard
in ages.
Regards
Graeme
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-que
Hello All,
I installed 8.1 yesterday on vmware exsi, all seemed to go fine, but
today I noticed when I fired up phpsysinfo a lot of dropped packets.
Device ReceivedSentErr/Drop
em0 0.00 KB 0.00 KB 343/0
plip0 0.00 KB 0.00 KB 0/0
lo0 0.00 KB 0.00 KB 0/0
%ifconfig
em0: flags
-Original Message-
From: Dick Hoogendijk [mailto:d...@nagual.nl]
Sent: 10 August 2010 21:10
To: FreeBSD Questions
Subject: ZFS woes
FreeBSD-8.1/amd64 -> I spend all evening trying to create a ZFS mirror
on my two 1Tb sata2 drives formerly used under opensolaris (zfs22) I
wiped out t
-Original Message-
From: Ryan Coleman [mailto:ryan.cole...@cwis.biz]
Sent: 11 August 2010 20:30
To: User Questions
Subject: HPT RocketRaid 2320 mobo support
List,
Is anyone running the HPT RR 2320 controller? What's the Motherboard
that you're running on?
My ABIT AB9 QuadGT's etherne
-Original Message-
From: Mark Terribile [mailto:materrib...@yahoo.com]
Sent: 12 August 2010 03:32
To: freebsd-questions@freebsd.org
Subject: Page fault in kernel when using CD, BSD 7.2
Hi,
In the last two days I've had two nasty problems on two machines. The
first started dumping cor
-Original Message-
From: Dick Hoogendijk [mailto:d...@nagual.nl]
Sent: 16 August 2010 21:49
To: Roland Smith
Cc: freebsd-questions@freebsd.org
Subject: Re: ZFS not usable on FreeBSD-8.1
On 16-8-2010 20:14, Roland Smith wrote:
> On Mon, Aug 16, 2010 at 10:35:58AM +0200, Dick Hoogendijk
From: Gil Vidals [mailto:gvid...@gmail.com]
Sent: Tue 07/09/2010 03:55
To: freebsd-questions@freebsd.org
Subject: zfs enabled freebsd requires root zfs partition?
I'm new to both FreeBSD and ZFS and need some guidance. The only way I could
get zfs to work was
88 matches
Mail list logo
