Hello All,
I installed 8.1 yesterday on vmware exsi, all seemed to go fine, but
today I noticed when I fired up phpsysinfo a lot of dropped packets.
Device Received Sent Err/Drop
em0 0.00 KB 0.00 KB 343/0
plip0 0.00 KB 0.00 KB 0/0
lo0 0.00 KB 0.00 KB 0/0
%ifconfig
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
ether 00:0c:29:6d:51:a9
inet 192.168.1.120 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
The machine that vmware runs on has intel gb based nics and I also run
pfsense as my router firewall on the same vmware exsi machine and it has
not dropped a packet.
Device Received Sent Err/Drop
em0 725.40 MB 1.19 GB 0/0
em1 3.49 GB 2.46 GB 0/0
lo0 375.63 KB 375.63 KB 0/0
enc0* 0.00 KB 0.00 KB 0/0
pfsyn 0.00 KB 0.00 KB 0/0
pflog 0.00 KB 146.35 MB 0/0
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
ether 00:0c:29:f0:0c:c3
inet 192.168.1.250 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::20c:29ff:fef0:cc3%em1 prefixlen 64 scopeid 0x2
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
The only difference I can see is according to phpsysinfo the 8.1 machine
shows - Intel Corporation - Gigabit Ethernet Controller (copper)
(82545EM)
Where as the pfsense vm shows em0: Intel(R) PRO/1000 Network Connection
6.9.6
Any one any ideas why this is showing dropped packets.
Regards
Graeme
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[email protected]"
