On 12/27/2009 2:36 PM, Len Conrad wrote:
Take a look here:
http://www.freebsd.org/doc/en/books/handbook/config-network-setup.html
thanks, I've been setting up FreeBSD for 10 years, and have multimple FreeBSD
VMs running in several ESXi hosts.
Sorry, I didn't mean to offend you. I just didn't
On Sun, Dec 27, 2009 at 10:13:11PM -0500, APseudoUtopia wrote:
>
> # /usr/libexec/atrun
> /libexec/ld-elf.so.1: Shared object "libpam.so.4" not found, required by
> "atrun"
>
> # find / -type f -name "libpam*" -ls
> 3274162 284 -r--r--r--1 root wheel
> 143412 Dec 5 04:48 /us
On 12/28/2009 7:46 AM, Victor Sudakov wrote:
To cut a long story short, I would rather continue using cvs, perhaps
until there is subversion-light in the base system.
I use successfully cvs for the same reasons. Most of the time I use the
French mirror and I have also used the two USA ones. I h
Nikos Vassiliadis wrote:
> >To cut a long story short, I would rather continue using cvs, perhaps
> >until there is subversion-light in the base system.
>
> I use successfully cvs for the same reasons. Most of the time I use the
> French mirror and I have also used the two USA ones. I haven't both
Victor Sudakov wrote:
> ... [svn] needs python26, perl and tcl - all the three of them ...
It seems you may have discovered the significance of the name:
it subverts the sysadmin's sanity. Maybe it can find practical
use as a meta-port for scripting languages, if someone cares to
add ruby to the
On Sunday 27 December 2009 18:16:47 krad wrote:
> fairly easy if you read the man page 8) I wrote this howto for sun
> boxes at work but it was using openssh so same rules should apply.
> Make sure chroot support was compiled in though
>
>1. Dont bother with sun ssh it wont work. Opensolaris a
Коньков Евгений wrote:
Здравствуйте, Matthew.
Вы писали 27 декабря 2009 г., 20:46:05:
MS> Коньков Евгений wrote:
Здравствуйте, Freebsd-questions.
when
tar -cf file.tar /home/*
It always says:
tar: Removing leading '/' from member names
man tar
-P Preserve pathnames...
But I do not need to pr
On Mon, Dec 28, 2009 at 11:46:37AM +0600, Victor Sudakov wrote:
> Victor Sudakov wrote:
>
> [dd]
>
> > > I would be happy to use svn as I do for my own projects.
> >
> > To run a cvs repository, you just need /usr/bin/cvs started from
> > inetd. It is even in the base system.
> >
> > To run a
Erik Trulsson wrote:
> >
> > > > I would be happy to use svn as I do for my own projects.
> > >
> > > To run a cvs repository, you just need /usr/bin/cvs started from
> > > inetd. It is even in the base system.
> > >
> > > To run a subversion repository, you need much more infrastructure and
>
How is this rewrite correct?
Users with Microsoft/Windows knowledge of how a hard drive is configured
may have a terminology issue with FreeBSD. Microsoft/Windows and FreeBSD
use the word partition to mean different (but related) things.
The Microsoft/Windows fdisk program is used to alloca
On Mon, 28 Dec 2009 21:04:57 +0800, Fbsd1 wrote:
> The Microsoft/Windows fdisk program is used to allocate partitions on
> the hard drive. This program allocated two types of partitions “primary
> dos partition” and “extended dos partition”.
Just a formal addition: "primary DOS partition" - DOS
I use fetchmail
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/mail-fetchmail.html
to download all my mail from the Uni mail
server to my fbsd box.
I typically run it in daemon mode, which requires
having my mail server password in plain text in .fetchmailrc
I'm a little worried about
Здравствуйте, Matthew.
Вы писали 28 декабря 2009 г., 12:04:47:
#cd /
# ls -l
total 5111
-rw-r--r-- 2 root wheel 786 7 сен 2008 .cshrc
-rw-r--r-- 2 root wheel 253 7 сен 2008 .profile
drwxrwxr-x 2 root operator 512 8 окт 2008 .snap
-r--r--r-- 1 root wheel
cronfy writes:
> How can I calculate max kernel dump size? I want to create my swap partition
> as small as possible, just to fit kernel dump needs.
I'm not sure you really can. You'll definitely have enough if you allow
a bit more than you have memory, but these days that's going to be
overkil
Hi all!
When building "Amarok" I get the following message:
Error: shared library "sgutils.1" does not exist
How can I obtain more information about it and where can I get it?
Greetings Frank
--
GU d- s:+ a+ C+>$ UBS>$ P L- !E--- W N+@ !o K--? !w--- O !M- !V- PS+ PE
Y? !PGP- t+ 5 X !R tv- b+
2009/12/28 Tijl Coosemans
> On Sunday 27 December 2009 18:16:47 krad wrote:
> > fairly easy if you read the man page 8) I wrote this howto for sun
> > boxes at work but it was using openssh so same rules should apply.
> > Make sure chroot support was compiled in though
> >
> >1. Dont bother w
2009/12/27 Marwan Sultan
>
> Dear Krad,
> Thank you for your reply, regarding your answer, i have few questions here
>
> 1-
> in sshd_config file the default line is :
> Subsystem sftp/usr/libexec/sftp-server
>
> So should i comment out the line? or just add your line ?
> Subsystem
> > How can I calculate max kernel dump size? I want to create my swap
> partition
> > as small as possible, just to fit kernel dump needs.
>
> I'm not sure you really can. You'll definitely have enough if you allow
> a bit more than you have memory, but these days that's going to be
> overkill mo
On 12/28/2009 11:11 AM, Victor Sudakov wrote:
Are you sure you understand me? I was talking about mirroring the
whole repository with cvsup/cvsupd protocol, that's where the
"Checksum mismatch -- will transfer entire file" error occurs.
Sorry, I missed the part of conversation about cvs mode in
2009/12/27 Tsu-Fan Cheng :
> Yeah, and I found there is a switch:
>
> ts[N] Save or restore file time (modification, creation, access)
>
> but what is the [N] supposed to mean? thanks!!
>
Without myself expending the effort, I'd guess epoch time.
--
--
__
On Mon, Dec 28, 2009 at 03:15:53PM +, Anton Shterenlikht wrote:
> I use fetchmail
> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/mail-fetchmail.html
> to download all my mail from the Uni mail
> server to my fbsd box.
>
> I typically run it in daemon mode, which requires
> having
Hi list
I have this little issue with my wireless card:
No matter where I am or what I'm downloading,
I just can't download at more than 31kBps ever
(only while using BSD).
What should I do to be able to download faster?
The bandwidth should be ~400kBps
I'm using 8.0.
/boot/loader.conf:
bcmwl5
I have been trying to get xorg 7.4 first going and then updated. I have some
general questions. First using xdm it takes from 3-5 minutes to start. Second,
using hal and dbus even starting is an adventure. Once it started in well under
a minute but mostly it just locks up. In reading Xorg.0.log
Ivan Voras wrote:
Ryan Ware wrote:
Maybe someone here can distribute some enlightenment. In the press
release for 8.0 it says, "FreeBSD now supports host and guest modes in
VirtualBox". I understand what the host mode support is with the
VirtualBox port. What I don't understand is what supp
On Mon, 28 Dec 2009, d...@safeport.com wrote:
I have been trying to get xorg 7.4 first going and then updated. I have some
general questions. First using xdm it takes from 3-5 minutes to start.
Second, using hal and dbus even starting is an adventure. Once it started in
well under a minute but
On 12/28/09, Ishmael F.E. wrote:
> Hi list
>
> I have this little issue with my wireless card:
> No matter where I am or what I'm downloading,
> I just can't download at more than 31kBps ever
> (only while using BSD).
>
> What should I do to be able to download faster?
>
> The bandwidth should be
Dear Sir,
I have installed BSD 7.2 release. All the installation worked fine till the
first re-boot of the system.
The reboot gos fine until the end where it breaks:
"Warning: /usr was not properly dismounted.
Mounting /etc/fstab filesystems failed, startup aborted
ERROR: ABORTING BOOT (sending
2009/12/28
> On 12/28/09
> > Hi list
> >
> > I have this little issue with my wireless card:
> > No matter where I am or what I'm downloading,
> > I just can't download at more than 31kBps ever
> > (only while using BSD).
> >
> > What should I do to be able to download faster?
> >
> > The bandwidt
FreeBSD-7.2
From time to time, I see a warning similar to this in
the /var/log/messages log file:
Dec 28 11:43:30 scorpio pulseaudio[3850]: module.c: module-detect is
deprecated: Please use module-udev-detect instead of module-detect!
Dec 28 11:43:30 scorpio pulseaudio[3850]: oss-util.c: '/dev/
On 12/28/09 2:38 PM, Jerry wrote:
> FreeBSD-7.2
>
> From time to time, I see a warning similar to this in
> the /var/log/messages log file:
>
> Dec 28 11:43:30 scorpio pulseaudio[3850]: module.c: module-detect is
> deprecated: Please use module-udev-detect instead of module-detect!
>
> Dec 28 1
On Mon, Dec 28, 2009 at 1:51 PM, wrote:
> Dear Sir,
>
> I have installed BSD 7.2 release. All the installation worked fine till the
> first re-boot of the system.
>
> The reboot gos fine until the end where it breaks:
>
> "Warning: /usr was not properly dismounted.
> Mounting /etc/fstab filesyste
In the last episode (Dec 25), Victor Sudakov said:
> > I cvsup the FreeBSD CVS repository daily from cvsup.ru.freebsd.org.
> > Both the client and the server run CVSup Software version: SNAP_16_1h,
> > Protocol version: 17.0.
> >
> > Recently I noticed that there are lots of messages "Checksum mi
Hi guys,
first up I hope I am in the right place as my questions are of a generic
nature about FreeBSD as I consider myself a new user not having much
mileage with the OS as of yet!
Secondly I just wanted to wish everyone a happy Christmas and New Year
also since we are in that period :-)
On Mon, Dec 28, 2009 at 3:49 PM, Kaya Saman wrote:
> Hi guys,
>
> first up I hope I am in the right place as my questions are of a generic
> nature about FreeBSD as I consider myself a new user not having much mileage
> with the OS as of yet!
>
> Secondly I just wanted to wish everyone a happy Ch
The fellow who showed some interest in my need for some kybd
feedback is a volunteer from Gallaudet U. Altho it is "unlikely"
that I'll get a free "XO" to hack on, the chances are better if I
have some kind of team.
The obvious "conflict"--if it can be c
Running with no xorg.conf is fine, but you need to make sure dbus and
hal are started at boot. Follow the handbook for best results.
http://www.freebsd.org/doc/en/books/handbook/x-config.html
I'm sure I started them as this doc is exactly what I followed.. I
think if I recall correct
On Mon, Dec 28, 2009 at 4:42 PM, Kaya Saman wrote:
> I know how strong UFS v.1 is as I use it with Solaris 9, but how about UFS
> v.2 which is what FreeBSD runs?? When compared with ext3 from a
> performance/reliability perspective which one comes on top?
>
I would say ufs2 easily wins, but reme
On Mon, Dec 28, 2009 at 14:42, Kaya Saman wrote:
>
>>
>> Running with no xorg.conf is fine, but you need to make sure dbus and hal
>> are started at boot. Follow the handbook for best results.
>>
>> http://www.freebsd.org/doc/en/books/handbook/x-config.html
>
> I'm sure I started them as this doc
I would say ufs2 easily wins, but remember this is the
freebsd-questions list ;) There are some differences though, ufs2
uses softupdates, not journaling(journaling is available and easy to
implement via gjournal). Softupdates I believe are a little faster
than journaling, but it's drawba
I can't speak to the rest, but WRT the GUI, I suspect you'll find it a
lot easier if you install a Window Manager to handle a lot of this. I
have found xfce4 to be a good one for me - gnome and kde were a bit
much. Once I installed /usr/ports/x11-wm/xfce4 with a 'make
config-recursive' then chos
On Monday 28 December 2009 22:49:31 Kaya Saman wrote:
> Hi guys,
>
> first up I hope I am in the right place as my questions are of a generic
> nature about FreeBSD as I consider myself a new user not having much
> mileage with the OS as of yet!
>
> Secondly I just wanted to wish everyone a happy C
On Mon, Dec 28, 2009 at 15:29, Kaya Saman wrote:
>
>> I can't speak to the rest, but WRT the GUI, I suspect you'll find it a
>> lot easier if you install a Window Manager to handle a lot of this. I
>> have found xfce4 to be a good one for me - gnome and kde were a bit
>> much. Once I installed /us
The most common cause is that either hald (sysutils/hal) or dbus (devel/dbus)
isn't running. Xorg needs them both to detect mouse and keyboard. Add
dbus_enable="YES" and hald_enable="YES" to rc.conf to get them to start
automatically.
We'll see what the issue actually is - as I mentione
Kurt Buff wrote:
On Mon, Dec 28, 2009 at 15:29, Kaya Saman wrote:
I see I didn't completely read your original message. Indulge me a
moment while I ramble here, and probably expose my ignorance...
Xorg/X11 <> Gnome
Gnome runs on Xorg: Xorg/Xfree runs X11
Xfree is now obsolete as Xor
My bad, it was the gateway the one
limiting the bandwidth : |
Tanks anyway
Have a nice day
2009/12/28
> 2009/12/28
>
>> On 12/28/09
>>
>> > Hi list
>> >
>> > I have this little issue with my wireless card:
>> > No matter where I am or what I'm downloading,
>> > I just can't download at more th
Polytropon wrote:
On Mon, 28 Dec 2009 21:04:57 +0800, Fbsd1 wrote:
The Microsoft/Windows fdisk program is used to allocate partitions on
the hard drive. This program allocated two types of partitions “primary
dos partition” and “extended dos partition”.
Just a formal addition: "primary DOS p
Adam Vande More wrote:
> On Mon, Dec 28, 2009 at 3:49 PM, Kaya Saman > wrote:
>
>> Hi guys,
>> I attempted an install of 7.2 stable on my laptop and subsequently
>> installed X11also. Now I didn't have any Xorg.conf file but each time I
>> tried to start X from the CLI using the normal startx com
On Mon, Dec 28, 2009 at 16:23, Kaya Saman wrote:
So, given what you've written below, you probably know more about this
stuff than I do. Cool. I will echo the advice already given, however:
add
dbus_enable="YES"
hald_enable="YES"
to your /etc/rc.conf. That will most likely clear your problem.
Dan Nelson wrote:
> In the last episode (Dec 25), Victor Sudakov said:
> > > I cvsup the FreeBSD CVS repository daily from cvsup.ru.freebsd.org.
> > > Both the client and the server run CVSup Software version: SNAP_16_1h,
> > > Protocol version: 17.0.
> > >
> > > Recently I noticed that there are
Nikos Vassiliadis wrote:
> >Are you sure you understand me? I was talking about mirroring the
> >whole repository with cvsup/cvsupd protocol, that's where the
> >"Checksum mismatch -- will transfer entire file" error occurs.
>
> Sorry, I missed the part of conversation about cvs mode in cvsup.
> I
[...]
add
dbus_enable="YES"
hald_enable="YES"
to your /etc/rc.conf. That will most likely clear your problem.
[...]
I will give this a go soon :-)
That's what I do with mine under FreeBSD, for both servers and workstations.
Having both servers and workstations is cool as both of
In freebsd-questions Digest, Vol 291, Issue 3, Message: 1
On Mon, 28 Dec 2009 21:04:57 +0800 Fbsd1 wrote:
> Content-Type: text/plain; charset=windows-1252; format=flowed
First up, you'd be better off using a non-Windows charset here, as they
use weird characters just for ordinary things like q
On Mon, 28 Dec 2009, Warren Block wrote:
On Mon, 28 Dec 2009, d...@safeport.com wrote:
I wouldn't install old versions of xdm. If there's a doubt about one of
the many things xdm depends on, you can do 'portupgrade -Rf xdm'. It'll
take quite a while.
It may be somehting like this. The syste
53 matches
Mail list logo
