I've recently implemented OpenVPN under FreeBSD
For our team, it's been rock solid
I found the OpenVPN docs were excellent for Windohs/Linux but were lacking a
little for BSD
while i don't know openvpn i use mpd (for windows interoperability) and
vtun (for unix only) both works excellent.
Wojciech Puchar wrote:
2) ZFS RAID-z turns your X drives to single drive performance both on read
and write. every normal RAID-5 implementation will give you random read
speed of X-1 times single drive speed, while slow random write speeds (but
still at least half of single drive). but this is
What im trying to figure out is the best way to install the OS on a compact
flash, put it as read only, then install a 2nd HDD to store the mysql
data,etc. What is the best way to do this?
you have to use tmpfs for /tmp, /var/tmp, /var/run and probably /var/log.
__
random write speeds (but still at least half of single drive). but
this is advertised as a feature
Is this because of checksum verification (the need to read all
components) or something else? Any documentation/references?
RAID-Z stores a single checksum over the whole stripe, instead of
check
On Mon, Jun 9, 2008 at 6:22 AM, Novembre <[EMAIL PROTECTED]> wrote:
> Hi,
>
> Is there any way to answer the posts in the mailing lists if one is not
> subscribed to the list and does not receive them in his mailbox? From time
> to time, I see posts which I can actually answer and contribute to, bu
noahwallach wrote:
>
> Okay I am not understanding something with stunnel. it appears that
> stunnel cant start because it cant create a pid file. It happens every
> time I upgrade it.
>
> # /usr/local/etc/rc.d/stunnel restart
> stunnel not running? (check /var/run/stunnel/stunnel.pid).
> S
try sslexplorer, http://n3ncy.com/UNIX/FreeBSD/SSLExplorer.htm
Schiz0 wrote:
>
> Hey,
>
> I'm looking for information on how to setup a Virtual Private Network
> on a FreeBSD 7.0-RELEASE system. The only VPNs that I've worked with
> previously is Hamachi on windows and linux, so I have no expe
On Sun, 8 Jun 2008 21:40:17 -0600
James <[EMAIL PROTECTED]> wrote:
> I have a high pitched whine coming from my motherboard when the EHCI
> USB 2.0 controller is enabled in the BIOS. The whine only starts once
> FreeBSD 7.0-RELEASE is halfway through booting.
>
> The whine also goes away when I
hi, stunnel 4.25 does not kill all stunnel instances after issuing "stop";
you have to kill all old stunnel jobs before restarting it.
noahwallach wrote:
>
> Just upgraded stunnel and getting the following error message in the
> /var/log/messages file. It appears that when I restart stunnel it
Hello everyone,
are there any experiences with FreeBSD being an NFSv4 client out there?
And furthermore, is there any further development of NFSv4 functionality
within FreeBSD to come closer to RFC 3530?
Thanks for any reply and best regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen,
Just did some tests and found out the same -
csup freezes when the Free memory ends (the virtual machine has 512 MB RAM).
Is this a known issue, and is there a workaround?
Thank you,
Iv
___
freebsd-questions@freebsd.org mailing list
http://lists.freeb
Hello all,
I have the following configuration -
FreeBSD 6.2 (minimal install)
Running in VMware 6.x
Windows VISTA BUSINESS 64-bit guest (core duo 3 GHz, 4 GB RAM)
supfile-stable is edited just with the domain (cvs.at) and the version
(6_3 or 7_0).
csup with this supfile runs for some time, t
Iv Ray wrote:
After restarting the 6.2 host
guest
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[E
Iv Ray wrote:
Windows VISTA BUSINESS 64-bit guest (core duo 3 GHz, 4 GB RAM)
^
host
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
On Sun, 8 Jun 2008 22:22:24 -0500
Novembre <[EMAIL PROTECTED]> wrote:
> Hi,
>
> Is there any way to answer the posts in the mailing lists if one is not
> subscribed to the list and does not receive them in his mailbox? From time
> to time, I see posts which I can actually answer and contribute to
Novembre wrote:
> Hi,
>
> Is there any way to answer the posts in the mailing lists if one is not
> subscribed to the list and does not receive them in his mailbox? From time
> to time, I see posts which I can actually answer and contribute to, but
> since I'm not subscribed to the lists, even if
Hello,
I am also (very) interested in running FreeBSD under HyperV since HyperV will
liberate itself from Windows Server soon after the final release (it will not
depend
on an preliminary Windows Server installation but will be "standalone" and
practically free of charge, which makes it (for me)
On Sun, 8 Jun 2008 20:19:04 -0600
Andrew Falanga <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I have, for some time, been able to ssh into my father's FreeBSD
> machine in the Road Runner network in Central New York. Last night,
> I tried so that I could fix a problem for him and ssh timed out. No
>
Ok heres the best solution, Im not even a big linux fan but install Ubuntu
Server KVM,
then install windows and FreeBSD 6, 7 or 8 Linux KVM just works, ive had 0
issues
with FreeBSD under KVM with bridged networking.
On Mon, Jun 9, 2008 at 6:59 PM, Nejc Škoberne <[EMAIL PROTECTED]> wrote:
> Hello
On Behalf Of Jason Morgan
> On Sun, Jun 08, 2008 at 09:40:17PM -0600, James wrote:
>> I have a high pitched whine coming from my motherboard when the EHCI
>> USB 2.0 controller is enabled in the BIOS. The whine only starts
once
>> FreeBSD 7.0-RELEASE is halfway through booting.
>>
>> The whine al
ifconfig
This looks ok. Mind you, I'm not all that up on wireless, so I don't
know if that could be part of your issue.
arp
? (192.168.1.3) at (incomplete) on ath0 [ethernet]
? (192.168.1.254) at (incomplete) on ath0 [ethernet]
This is generally telling you that you have recently attemp
On Thu, Jun 05, 2008 at 04:07:23PM +0200, Kris Kennaway wrote:
> Anton Shterenlikht wrote:
> >g95.out:
> >libm.so.5 => /lib/libm.so.5 (0x280c5000)
> >libc.so.7 => /lib/libc.so.7 (0x280db000)
>
> ^-- this one doesn't link to a dynamic fortran library, so it is
> presumably statical
In the Gmail web interface:
Settings -=> Forwarding and POP/IMAP -=> Enable POP for all mail
This isn't a Thunderbird issue.
On Mon, Jun 9, 2008 at 7:44 AM, Aryeh M. Friedman <[EMAIL PROTECTED]>
wrote:
> I just switched machines and want to force thunderbird to download
> everything in my "A
Hello everybody,
I am trying to build a VMware twin of an existing production server
running FreeBSD 6.2. I have a 6.2 boot only ISO. The installation from
FTP works well, but I have some strange issues - (i. e. csup when
pulling the 6.3 sources freezes the OS and completes after two restarts,
Same here.
--
Robi
Outback Dingo wrote:
Ok heres the best solution, Im not even a big linux fan but install Ubuntu
Server KVM,
then install windows and FreeBSD 6, 7 or 8 Linux KVM just works, ive had 0
issues
with FreeBSD under KVM with bridged networking.
On Mon, Jun 9, 2008 at 6:59 PM, Nej
video.cgi is not the video you were watching it is a partial code segment
from the web server you were browsing.
there is no such video encapsulation type as a .cgi file, they are common
gateway interface scripts/executables.
On Sun, Jun 8, 2008 at 11:57 PM, <[EMAIL PROTECTED]> wrote:
> I just di
On Sun, Jun 08, 2008 at 11:39:06PM -0700, Steve Quinn wrote:
> --- On Sun, 6/8/08, Gonzalo Nemmi <[EMAIL PROTECTED]> wrote:
>
> > Please _do_ send them to this list or throw a pointer at
> > where they are at !
> > I'm sure more people than you can think of will find
> > them usefull.
> > I, for o
Hi FreeBSD users
Currently in /usr/ports/sysutils/syslog-ng there is version syslog-ng
1.6.12. I need version syslog-ng 1.6.5 (the same as in production
environment) to test configuration changes.
Is there an archive of the ports tree? Whats the FreeBSD way to
install this old version integrated
Simon Jolle wrote:
What is the FreeBSD way to
install this old version integrated in the rest of the system?
If 1.6.12 was already installed, I would use portdowngrade.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/
In response to "Simon Jolle" <[EMAIL PROTECTED]>:
> Hi FreeBSD users
>
> Currently in /usr/ports/sysutils/syslog-ng there is version syslog-ng
> 1.6.12. I need version syslog-ng 1.6.5 (the same as in production
> environment) to test configuration changes.
>
> Is there an archive of the ports tr
On Sun, 8 Jun 2008 16:07:12 -0700, Bill Campbell <[EMAIL PROTECTED]> wrote:
> On Mon, Jun 09, 2008, Raphael Becker wrote:
>>On Sun, Jun 08, 2008 at 10:15:50PM +0200, Wojciech Puchar wrote:
>>> find . -type f -print0|xargs -0 grep
>>
>>There's no more need for find | xargs
>>
>>Try:
>>
>>find . -t
Hello,
when I want to install www/apache22 then following
error appears:
beastie# make install clean
===> Installing for apache-2.2.8
===> apache-2.2.8 conflicts with installed
package(s):
apr-db42-1.2.8_2
They install files into the same place.
Please remove them first with
On Sun, 08 Jun 2008 22:23:19 +0200, Simon Jolle sjolle <[EMAIL PROTECTED]>
wrote:
> On 06/08/2008 10:12 PM, Bill Campbell wrote:
>> On Sun, Jun 08, 2008, Jos Chrispijn wrote:
>>> I tried to make a grep script on find a string in all files on path
>>> ./ and down. It does anything exept searching i
I use ports/lang/gcc42.
I set WITHOUT_JAVA=yes in the Makefile.
However, with each tree update this option is
overwritten, so I have to edit the Makefile
each time I update the port.
What is the best way to preserve my custom setting,
add an environment variable?
many thanks
anton
--
Anton Sht
Hello,
I'm new to FreeBSD and really attracted to it because of the
performance and stability it provides. So I am looking to develop a
high performance system that may need to process over 100K UDP
messages per second and be able to store information quickly. I
couldn't find much documentation on
Hi,
I recently upgraded a machine from FreeBSD 6.3 to 7.0. Everything is
working fine except for the OpenVPN server. I had it set up with a
bridge configuration, but now even with a basic tunnel I can't get
successful ping across the VPN. I can make a connection from both
Linux and OS X b
Unga <[EMAIL PROTECTED]> writes:
> How to do regression on libc to verify the correctness?
There are conformance test suites out there.
The decent ones all seem to cost money, but
you might want to look at the "Open POSIX"
project.
___
freebsd-quest
On Sat, Jun 07, 2008 at 05:09:08PM -0700, Tobias Hoellrich wrote:
> [Disclaimer: I work for Adobe Systems. I have nothing to do with the
> Flash Player. I'm a grunt who works on other stuff. This is my personal
> opinion as a long-time FreeBSD user and I'm not making any statements
> for Adobe.]
>
On Behalf Of cpghost
> On Sun, 8 Jun 2008 21:40:17 -0600
> James <[EMAIL PROTECTED]> wrote:
>
>> I have a high pitched whine coming from my motherboard when the EHCI
>> USB 2.0 controller is enabled in the BIOS. The whine only starts
once
>> FreeBSD 7.0-RELEASE is halfway through booting.
>>
>>
Sean Cavanaugh wrote:
Date: Fri, 6 Jun 2008 15:48:46 -0500
To: freebsd-questions@freebsd.org
From: [EMAIL PROTECTED]
Subject: Re: vmware timekeeping
At 03:23 p.m. 06/06/2008, you wrote:
I'm running FreeBSD 6.3-release as a guest on VMware ESX 3
Uwe Laverenz wrote:
On Fri, Jun 06, 2008 at 04:23:41PM -0400, Jeff Dickens wrote:
option turned on in ESX's .vmx file, and I have "hint.apic.0.disabled=1"
in my FreeBSD guest's /boot/loader.conf.
This shouldn't be necessary in FreeBSD >= 6.2.
hmm.
I used to have "kern.hz=100" i
Hello,
Greetings,
Iam new to this forum and to the Unix.My interest is to install and configure
freeBSD on my desktop computer.I have downloaded the iso for i386.
and burn on the CD and DVD.My problem is when I boot from the CD or DVD ,it
didnt send me to the screen for selection options as it is
Hello all,
I have a FreeBSD 7 machine that I am running gmirror on (ad4 and ad6).
there is an /exports and /home that need to be resized.
(right now they each are about 55G and /home needed to have been 100G
and exports 10G)
what do I need to do to fix this.
I am assuming break the mirror,
On Sun, 8 Jun 2008 16:07:12 -0700 Bill Campbell <[EMAIL PROTECTED]> wrote:
> On Mon, Jun 09, 2008, Raphael Becker wrote:
> >On Sun, Jun 08, 2008 at 10:15:50PM +0200, Wojciech Puchar wrote:
> >> find . -type f -print0|xargs -0 grep
> >
> >There's no more need for find | xargs
> >
> >Try:
Huu Daud wrote:
Hello,
Greetings,
Iam new to this forum and to the Unix.My interest is to install and configure
freeBSD on my desktop computer.I have downloaded the iso for i386.
and burn on the CD and DVD.My problem is when I boot from the CD or DVD ,it
didnt send me to the screen for selectio
On Mon, Jun 09, 2008 at 03:33:01PM +0100, Anton Shterenlikht wrote:
> I use ports/lang/gcc42.
> I set WITHOUT_JAVA=yes in the Makefile.
> However, with each tree update this option is
> overwritten, so I have to edit the Makefile
> each time I update the port.
>
> What is the best way to preserve
On Mon, Jun 09, 2008 at 08:24:13AM -0700, Huu Daud wrote:
> Hello,
> Greetings,
> Iam new to this forum and to the Unix.My interest is to install and
> configure freeBSD on my desktop computer.I have downloaded the iso for
> i386. and burn on the CD and DVD.My problem is when I boot from the CD or
http://www.sataport.com/
i mean port multipliers
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Written by B. Cook on 06/09/08 10:23>>
> Hello all,
>
> I have a FreeBSD 7 machine that I am running gmirror on (ad4 and ad6).
>
> there is an /exports and /home that need to be resized.
>
> (right now they each are about 55G and /home needed to have been 100G
> and exports 10G)
>
> what do I n
there is an /exports and /home that need to be resized.
(right now they each are about 55G and /home needed to have been 100G and
exports 10G)
more exact info please.
gmirror status
mount or cat /etc/fstab
___
freebsd-questions@freebsd.org mailin
On Mon, Jun 09, 2008 at 08:24:13AM -0700, Huu Daud wrote:
> Hello,
> Greetings,
> Iam new to this forum and to the Unix. My interest is to install and
> configure freeBSD on my desktop computer.I have downloaded the iso for i386.
> and burn on the CD and DVD.My problem is when I boot from the CD
Wojciech Puchar wrote:
> http://www.sataport.com/
>
> i mean port multipliers
>
http://kerneltrap.org/mailarchive/freebsd-current/2008/4/11/1402054
So the answer is there is support in -CURRENT but is still in its early
stages.
Vince
> ___
> freebs
On Jun 9, 2008, at 12:12 PM, Wojciech Puchar wrote:
there is an /exports and /home that need to be resized.
(right now they each are about 55G and /home needed to have been
100G and exports 10G)
more exact info please.
gmirror status
mount or cat /etc/fstab
NameStatus Com
Jerry McAllister ha scritto:
On Mon, Jun 09, 2008 at 08:24:13AM -0700, Huu Daud wrote:
Hello,
Greetings,
Iam new to this forum and to the Unix. My interest is to install and
configure freeBSD on my desktop computer.I have downloaded the iso for i386.
and burn on the CD and DVD.My problem i
On Mon, 9 Jun 2008 at 18:33 +0200, [EMAIL PROTECTED] confabulated:
Jerry McAllister ha scritto:
On Mon, Jun 09, 2008 at 08:24:13AM -0700, Huu Daud wrote:
Hello,
Greetings,
Iam new to this forum and to the Unix. My interest is to install and
configure freeBSD on my desktop computer.I have do
On Mon, 2008-06-09 at 17:00 +, D Hill wrote:
> Likely you have burned the iso file on a windows machine? I use both Roxio
> and Nero and have NEVER had any issues. Both will automatically set up
> correctly to burn the contents of the ISO just by double-clicking on the
> ISO image.
As will
Hello,
On Sun, Jun 8, 2008 at 10:19 PM, Andrew Falanga <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I have, for some time, been able to ssh into my father's FreeBSD machine in
> the Road Runner network in Central New York. Last night, I tried so that I
> could fix a problem for him and ssh timed out.
On Mon, Jun 09, 2008 at 06:33:56PM +0200, Filippo Moretti wrote:
> Jerry McAllister ha scritto:
> >On Mon, Jun 09, 2008 at 08:24:13AM -0700, Huu Daud wrote:
> >
> >
> >>Hello,
> >>Greetings,
> >>Iam new to this forum and to the Unix. My interest is to install and
> >>configure freeBSD on my des
Hi,
Im trying to upgrade some ports, and have a problem with libcdio. At least i
think i do.
When i try to upgrade, say, Nautilus (or a buncha other things), it dies in the
end with a "libcdio-0.78.2_2 is already installed. You may wish to make
deinstall"
etc. message.
But i did go to /usr/por
On Mon 2008-06-09 12:10:01 UTC-0500, Shelby Cain ([EMAIL PROTECTED]) wrote:
> On Mon, 2008-06-09 at 17:00 +, D Hill wrote:
>
> > Likely you have burned the iso file on a windows machine? I use both
> > Roxio and Nero and have NEVER had any issues. Both will automatically
> > set up correctly t
Thank you all for discussing this with me. I really like to here your opinions.
I wont answer to all of your posts, because half of them is off-topic,
but still interesting to read.
I haven't heard/read about any huge CPU consumptions from ZFS, not yet
at least. If you have links to benchmarks and
On Tue, 10 Jun 2008 01:44:36 +1000 (EST), Ian Smith <[EMAIL PROTECTED]> wrote:
>On Sun, 8 Jun 2008 16:07:12 -0700 Bill Campbell <[EMAIL PROTECTED]> wrote:
>>On Mon, Jun 09, 2008, Raphael Becker wrote:
>>>On Sun, Jun 08, 2008 at 10:15:50PM +0200, Wojciech Puchar wrote:
find . -type f -print0|xa
On Mon, 9 Jun 2008 20:58:10 +0200
"Anders Häggström" <[EMAIL PROTECTED]> wrote:
> For the memory I've read that ZFS use up to approximately 700MB of ram
> for caching, which is quite much, but not too much compared to my 4GB
> that is available. However there doesn't seem to be an upper limit for
Huu Daud wrote:
Iam new to this forum and to the Unix.My interest is to install and configure
freeBSD on my desktop computer.I have downloaded the iso for i386.
and burn on the CD and DVD.My problem is when I boot from the CD or DVD ,it
didnt send me to the screen for selection options as it is
On Mon, Jun 9, 2008 at 9:27 AM, Bob McConnell <[EMAIL PROTECTED]> wrote:
> On Behalf Of cpghost
>> On Sun, 8 Jun 2008 21:40:17 -0600
>> James <[EMAIL PROTECTED]> wrote:
>>
>>> I have a high pitched whine coming from my motherboard when the EHCI
>>> USB 2.0 controller is enabled in the BIOS. The wh
Hey,
I recently upgraded a machine from FreeBSD 6.3 to 7.0. Everything is
working fine except for the OpenVPN server. I had it set up with a
bridge configuration, but now even with a basic tunnel I can't get
successful ping across the VPN. I can make a connection from both Linux
and OS X but
On Mon, 9 Jun 2008, Bill Moran wrote:
In response to "Simon Jolle" <[EMAIL PROTECTED]>:
Currently in /usr/ports/sysutils/syslog-ng there is version syslog-ng
1.6.12. I need version syslog-ng 1.6.5 (the same as in production
environment) to test configuration changes.
Is there an archive of th
2008/6/9 Dick Hoogendijk <[EMAIL PROTECTED]>:
> On Mon, 9 Jun 2008 20:58:10 +0200
> "Anders Häggström" <[EMAIL PROTECTED]> wrote:
>
>> For the memory I've read that ZFS use up to approximately 700MB of ram
>> for caching, which is quite much, but not too much compared to my 4GB
>> that is available
Hi,
just noticed that I need to update a whole bunch of ports due to
gettext issue, I am used to portmaster and henceforth exec portmaster
-uBdr gettext\* -x avifile to server this need. however, the update is
interrupted and needed to restart, I noticed an option (-R) to allow
skipping ports al
On Mon, Jun 09, 2008 at 09:45:43PM +0200, Jos Chrispijn wrote:
> Huu Daud wrote:
> >Iam new to this forum and to the Unix.My interest is to install and
> >configure freeBSD on my desktop computer.I have downloaded the iso for
> >i386.
> >and burn on the CD and DVD.My problem is when I boot from
People,
This is a bit hard to figure out how to phrase, so please bear
with me. I want to put-back a BBS/forum type app somewhere on my
site so that members of my writing group can continue to help me
with their suggestions and edits of my Jottings projec
I haven't heard/read about any huge CPU consumptions from ZFS, not yet
as i already said. most people today have problems as they have too fast
CPU and too much RAM ;)
they don't see high CPU load on quad core machine with 16GB RAM having not
big load :)
For the memory I've read that Z
This limit can be tuned. At least on solaris.
Also, ZFS definitely prefers a 64 bit kernel.
That's good to know, thanks! Do you have any reference/link that
describes how to manage that? It's good to know for the future.
when i tested it i was able to run it on 256MB machine stable after
read
I've recently noticed slow performance on a machine that runs amanda and stores
backups for our network on a RAID-5. It was running 6.2. I upgraded to 6.3 just
today, so it is completely up to date on the 6 branch. Here's hopefully most of the
relevant info:
6.3-STABLE FreeBSD 6.3-STABLE #0: M
On Jun 9, 2008, at 2:09 PM, Adam Bayless wrote:
[ ... ]
Unit UnitType Status %Cmpl Stripe Size(GB) Cache
AVerify IgnECC
--
u0RAID-5OK - 64K 2095.44 OFF
OFF OFF
C
On Mon, 9 Jun 2008 23:31:35 +0200 (CEST)
Wojciech Puchar <[EMAIL PROTECTED]> wrote:
> UFS use what's unused. works on 16MB and 16GB.
It's difficult to tell about consumed memory in ZFS vs UFS since UFS
can be quite agressive at caching as well. -(although this caching is
often hidden by system to
Caching is off; that will kill performance especially for small
transactions. If you've got battery backup for this system, consider
enabling the onboard cache...?
Chuck, that made an immediate and huge difference:
# tw_cli set cache c0 u0 on
# dd if=/dev/zero of=testfile
5649235+0 r
On Jun 9, 2008, at 3:09 PM, Adam Bayless wrote:
Caching is off; that will kill performance especially for small
transactions. If you've got battery backup for this system,
consider enabling the onboard cache...?
Chuck, that made an immediate and huge difference:
# tw_cli set cache c0 u0
dd if=/dev/zero of=testfile
165760+0 records in
165759+0 records out
84868608 bytes transferred in 25.028232 secs (3390915 bytes/sec)
I think I ought to be able to get more than 3.2MB/sec out of this card,
with default 512 bytes blocks - not much more
_
> Hi,
>just noticed that I need to update a whole bunch of ports due to
> gettext issue, I am used to portmaster and henceforth exec portmaster
> -uBdr gettext\* -x avifile to server this need. however, the update is
> interrupted and needed to restart, I noticed an option (-R) to allow
> skipp
Running 40 sparse zones is hardly noticable.
Try that with 40 jails;-)
you probably don't have your jails configured right. my 1GB pentium 4
machine runs 20 jails, and it is hardly noticable.
___
freebsd-questions@freebsd.org mailing list
http://lis
On Monday 09 June 2008 16:33:01 Anton Shterenlikht wrote:
> I use ports/lang/gcc42.
> I set WITHOUT_JAVA=yes in the Makefile.
> However, with each tree update this option is
> overwritten, so I have to edit the Makefile
> each time I update the port.
>
> What is the best way to preserve my custom
On Mon, 9 Jun 2008, Bob McConnell wrote:
On Behalf Of cpghost
On Sun, 8 Jun 2008 21:40:17 -0600
James <[EMAIL PROTECTED]> wrote:
I have a high pitched whine coming from my motherboard when the EHCI
USB 2.0 controller is enabled in the BIOS. The whine only starts
once
FreeBSD 7.0-RELEASE is
[Please cc in replies, not currently subscribed. Thank you.]
I have a quick question that I can't seem to find an answer to via Google
so far.
I've had a few people complain that when they telnet/ssh/ftp/web to our
server, it's slow... I've traced the problem to them having no reverse on
the
At 08:57 PM 6/9/2008, Jake Evans wrote:
[Please cc in replies, not currently subscribed. Thank you.]
I have a quick question that I can't seem to find an answer to via Google
so far.
I've had a few people complain that when they telnet/ssh/ftp/web to our
server, it's slow... I've traced the
On Mon, 2008-06-09 at 11:27 -0400, Bob McConnell wrote:
> On Behalf Of cpghost
> > On Sun, 8 Jun 2008 21:40:17 -0600
> > James <[EMAIL PROTECTED]> wrote:
> > I'm no specialist and it may be an urban legend, but from
> > what I gathered, some coils could exhibit the behavior of
> > generating those
On 9-Jun-08, at 3:49 PM, Nejc koberne wrote:
I do. I don't use bridging, though. Do you have a good reason to use
it?
I was using it because I could then assign my laptop the same IP
easily through my router (a separate device with DHCP) and also have
hostnames pushed through DHCP. But I
On 9-Jun-08, at 5:31 PM, Gary Kline wrote:
This is a bit hard to figure out how to phrase, so please bear
with me. I want to put-back a BBS/forum type app somewhere on my
site so that members of my writing group can continue to help me
with their suggestions and
Hi all
Where is the source directory of /lib/libm.so.x in /usr/src/?
grep -lr LIB=m /usr/src/ does not show any result.
Kind regards
Unga
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-question
On Mon, Jun 9, 2008 at 3:42 AM, Odhiambo Washington <[EMAIL PROTECTED]>
wrote:
> On Mon, Jun 9, 2008 at 6:22 AM, Novembre <[EMAIL PROTECTED]> wrote:
> > Hi,
> >
> > Is there any way to answer the posts in the mailing lists if one is not
> > subscribed to the list and does not receive them in his m
[mailed and posted]
On Jun 9, 2008, at 8:57 PM, Jake Evans wrote:
I've had a few people complain that when they telnet/ssh/ftp/web to
our server, it's slow... I've traced the problem to them having no
reverse on their IPs.
You should configure your servers to not do the reverse lookup. No
On Mon, Jun 9, 2008 at 5:40 AM, Randy Pratt <[EMAIL PROTECTED]> wrote:
> On Sun, 8 Jun 2008 22:22:24 -0500
> Novembre <[EMAIL PROTECTED]> wrote:
>
> > Hi,
> >
> > Is there any way to answer the posts in the mailing lists if one is not
> > subscribed to the list and does not receive them in his mai
On Mon, 9 Jun 2008 21:02:52 -0700 (PDT), Unga <[EMAIL PROTECTED]> wrote:
> Hi all
> Where is the source directory of /lib/libm.so.x in /usr/src/?
>
> grep -lr LIB=m /usr/src/ does not show any result.
Try using a few spaces or TABs around '=' :)
The directory you want is `/usr/src/lib/msun'.
___
> well it applied almost clean to FreeBSD 6.3!
>
> almost means i have to skip 2 patches to sctp_* files, as sctp doesn't
> exist in FreeBSD 6.*, everything else patched
>
> we will see after compiling.
Did it work? Did it work? Did it work?
(Or is the absence of a giant WOOOHOOO! the indicato
On Mon, Jun 09, 2008 at 11:50:45PM -0400, Andrew Berry wrote:
> On 9-Jun-08, at 5:31 PM, Gary Kline wrote:
>
> > This is a bit hard to figure out how to phrase, so please bear
> > with me. I want to put-back a BBS/forum type app somewhere on my
> > site so that members of my writing
--- On Tue, 6/10/08, Giorgos Keramidas <[EMAIL PROTECTED]> wrote:
> From: Giorgos Keramidas <[EMAIL PROTECTED]>
> Subject: Re: Source directory of libm.so?
> To: freebsd-questions@freebsd.org
> Date: Tuesday, June 10, 2008, 12:19 PM
> On Mon, 9 Jun 2008 21:02:52 -0700 (PDT), Unga
> <[EMAIL PROTECT
exist in FreeBSD 6.*, everything else patched
we will see after compiling.
Did it work? Did it work? Did it work?
(Or is the absence of a giant WOOOHOOO! the indicator that it didn't
work at all?)
unfortunately not with 6.*, i was unable to complete patching by hand.
but it works in 7.*
___
97 matches
Mail list logo
