ifconfig
This looks ok. Mind you, I'm not all that up on wireless, so I don't know if that could be part of your issue.
arp ? (192.168.1.3) at (incomplete) on ath0 [ethernet] ? (192.168.1.254) at (incomplete) on ath0 [ethernet]
This is generally telling you that you have recently attempted to communicate to the IP's, and address resolution is in progress (and in your case, most likely will timeout).
The rest of your message is irrelevant at this point, since you can't even resolve the layer 2 addresses on the local link.
I'd have to say at this point that either there is a problem with the wireless config on the FreeBSD machine, or there is a firewall on the machine blocking your traffic.
Does the linksys show you as connected? If you enable DHCP on the linksys, does it register a client lease for the box?
If you cable yourself directly to the Linksys (as opposed to wireless) with the same IP configuration, does it work then?
Steve _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
