Re: tetex, latex, dvips

At 2005-05-16T23:11:22+02:00, Florian Hengstberger wrote: > ===> Installing for dvips-5.76 > > ===> dvips-5.76 conflicts with installed package(s): > teTeX-base-2.0.2_2 > teTeX-texmf-2.0.2 My ports tree, which is already a few weeks old, provides teTeX 3.0. You may want to upgrad

highpoint rocketraid 454 - RAID 1

OK, I'm seriously stuck. I have searched every resource exhaustively, found bits and pieces, but not what I'm after. This is *honestly* my last resort. I have a HighPoint RocketRAID 454 with two Western Digital 200GB disks (I was hoping to boot FBSD off of these). I've setup a RAID 1 array under th

RE: The availability of socketbits.h?

Dan Nelson wrote: > It looks like missing.h was added in 1.1.15, but the author didn't run > all the necessary autoconf commands afterwards. Try running > "autoheader253" (you will see that a HAVE_FTRUNCATE placeholder gets > added to config.h.in), and rerun configure and make. > > It looks like

RE: The availability of socketbits.h?

Xu Qiang wrote: > Thanks for your suggestions. Yes, this error is overcome after > running "autoheader". But now another error of the same type appears: > - > mink.c:22: error: conflicting types for 'random' > /usr/include/stdlib.h:200: error: pr

RE: highpoint rocketraid 454 - RAID 1

Hi Eugene, OK, let me explain "supported" just a bit, here. ;-) There's 2 kinds of driver support we are talking about. The first is driver support where the driver can talk directly to the hard drives on the IDE controller. That's what you got. The second is the support where the drive

Creating a specific/own installation set

Hello out here. My intention is as follows. I would like to create an installation DVD for FreeBSD/AMD64 with a specific set of packages. I would like to do so because I have a set of AMD64 machines which are not connected to a fast internet wire (some due to security reasons, others in privat

Re: Daemon Process

Hi All, Thank you very much for the feedback. Now, suppose I want to write a daemon for Unix in C whose job is to monitor other daemons and restart dead daemons. The daemon may take the list of such daemons to monitor from a file. I want to know how can this be programmatically achieved. Thank

Re: IPSec and Racoon between 5.4 and 4.11

Mike Tancsa wrote: > On Mon, 16 May 2005 12:51:50 +0100, in sentex.lists.freebsd.questions > you wrote: > > >>Hi, >> >>Has anybody got 5.4 <-> 4.11 talking in this config, or does anybody >>know of any pitfalls because of kernel changes? > > > There should not be any issues as I have 90+ RELENG

power off button

Is there any way to control what command is executed when I push the power off button on my laptop? Currently it seems as if it executes a halt or shutdown -h when I push the button. In 5.4-RELEASE this does not power my system off ... but halt -p does. Should be some sort of ACPI configuratio

Re: Daemon Process

On Tue, May 17, 2005 at 01:57:28PM +0530, Gowtham wrote: > Hi All, > Thank you very much for the feedback. Now, suppose I want to write a daemon > for Unix in C whose job is to monitor other daemons and restart dead > daemons. The daemon may take the list of such daemons to monitor from a > file

RE: How to use snapshots

(B (B-Original Message- (BFrom: [EMAIL PROTECTED] (B[mailto:[EMAIL PROTECTED] Behalf Of Joel (BSent: Monday, May 16, 2005 11:47 PM (BTo: freebsd-questions@FreeBSD.ORG (BSubject: Re: How to use snapshots (B (B (B(reformatted, to maintain the thread) (B (B> > > ftp://current.free

nfs send error 32

Hi all, I've an NFS-mounted filesystem (server runs deadrat linux) on a lot of my FreeBSD systems (4.11R), mount options are "bg,rw,intr,-T,-r32768,-w32768". Using TCP and 32k buffers does enhance performance notably. But I've a couple of error messages in /var/log/messages of my clients each da

Re: nfs send error 32

Konrad Heuer wrote: Hi all, I've an NFS-mounted filesystem (server runs deadrat linux) on a lot of my FreeBSD systems (4.11R), mount options are "bg,rw,intr,-T,-r32768,-w32768". Using TCP and 32k buffers does enhance performance notably. But I've a couple of error messages in /var/log/messages of m

Re: How to use snapshots

(reformatted, to maintain the thread) (B> > > > > ftp://current.freebsd.org/pub/FreeBSD/snapshots/ looks like (B> > > > install disc1 (B> > > > > content. (B> > > > > (B> > > > > How or what do I need to run to use this to update my system? (B> > > > > (B> > > > > Been to the official hand

Re: IPSec and Racoon between 5.4 and 4.11

On Tue, 17 May 2005 09:33:40 +0100, in sentex.lists.freebsd.questions you wrote: >A basic tunnel (without any encryption) works fine. As soon as >ipsec_enable is set in rc.conf, it fails. > >setkey -D shows No SAD entries. > >If I start a ping from 192.168.1.254 -> 192.168.0.254, the receiving >m

RE: How to use snapshots

> > ftp://current.freebsd.org/pub/FreeBSD/snapshots/ (B> (B> I know how to use the normal FTP mirror site to fetch the .iso (Bfile (B> and burn a bootable cdrom or use cvs to build the sources to (B> recompile the complete system. (B (BThen you should, as nearly as I understand it, know how

ftp server

I am unable to get access to the ftp.freebsd.org server. Is it down? Jason King ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: highpoint rocketraid 454 - RAID 1

Hello, Use the binary driver from HighPoint http://www.highpoint-tech.com/BIOS%20%2B%20Driver/rr454/FreeBSD/374-r5-bsd-v122.tgz Though the latest kernel module is intended for 5.3-RELEASE it should work with 5.4-RELEASE. I have the SATA counterpart of this controller and it does. It might be nece

Re: Transferring dump file to tape?

>> >> > On Mon, May 16, 2005 at 11:36:18AM -0500, Viren Patel >> > wrote: >> >> Hello. I am using 'dump' to backup client filesystems >> to >> >> a >> >> disk file on an NFS mounted partition, e.g. >> >> >> >>dump -0aLu -f /bk/var-20050516 /var >> >> >> >> Now I'd like to take the backup file (

FTP

Actually, I can get onto the ftp.freebsd.org sitemy pkg_add command says this: Error: FTP Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-5.3-release/Latest/apache13.tbz: File unavailable (e.g., file not found, no access) pkg_add: unable to fetch 'ftp://ftp.freebsd.org/

Vsftpd not chown'ing uploads

Did you get an answer to this question? I want to know how to set privs to allow dir list, upload, but not delete. Vsftpd not chown'ing uploads http://lists.freebsd.org/pipermail/freebsd-questions/2003-October/021270 .html ___ freebsd-questions

Re: IPSec and Racoon between 5.4 and 4.11

Mike Tancsa wrote: > On Tue, 17 May 2005 09:33:40 +0100, in sentex.lists.freebsd.questions > you wrote: > >>A basic tunnel (without any encryption) works fine. As soon as >>ipsec_enable is set in rc.conf, it fails. >> >>setkey -D shows No SAD entries. > > >>If I start a ping from 192.168.1.254

Re: Transferring dump file to tape?

> >> >> > >> >> Any way to do this? > >> > > >> > You can use dd to write a file to a device (e.g. > >> tape). > >> > > >> > Kris > >> > > >> > >> I thought so too, but it doesn't work. When I issue > >> > >>dd if=var-20050516 of=/dev/nsa0 > >> > >> I get the following error: > >> > >> dd: /dev

Re: How to use snapshots

Top-post, don't please. "fbsd_user" <[EMAIL PROTECTED]> writes: > I have no idea what you mean by those statements. > What floppies are you talking about? The ones in the floppies directory. > How do I download the snapshot version with all the files and > sub-directors? There are many ways yo

KDE INSALL

Hi everyone, I'm new to freebsd and you have seen my previous post I do apologize, but appraretnly I am unable post from my work email-hence the hotmail address now. I ran make install clean for kde and after 4 days i *think* I'm almost done,, I am now at a promt for GNU ghostscript drivers

Re: FTP

Jason King <[EMAIL PROTECTED]> writes: > Actually, I can get onto the ftp.freebsd.org sitemy pkg_add > command says this: > > Error: FTP Unable to get > ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-5.3-release/Latest/apache13.tbz: > File unavailable (e.g., file not found, no access)

RE: How to use snapshots

"fbsd_user" <[EMAIL PROTECTED]> writes: > I have no idea what you mean by those statements. > What floppies are you talking about? The ones in the floppies directory. > How do I download the snapshot version with all the files and > sub-directors? There are many ways you could do that, but the

RE: ftp server

there are many ftp servers. use ftpX.freebsd.org where X= number 1 through 13 See handbook for listed locations of all ftp mirror sites -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jason King Sent: Monday, May 16, 2005 4:28 PM To: [EMAIL PROTECTED] Subjec

Spam/AV filtering

Good morning, I am using sendmail/qpopper and need a way to do spam and virus filtering. There seems to be a number of ports I can use in the ports collection. I was hoping to get some advice on which one you prefer. I am a bit of a novice so something easy to install would be preferable and I a

RE: FTP

to use pkg_add -r command you have to specify the port name (IE: apache13), not it's file download name. see the install guide section on ports for detailed description http://www.unixguide.net/freebsd/fbsd_installguide/index.php -Original Message- From: [EMAIL PROTECTED] [mailto:[EMA

Exec format error

Hello I recently installed the squidtimes package from ports at 5.4-R then I have such erreor message when launching it ... squidtimes: Exec format error. Binary file not executable. A bit strange as make and make install ran smoothly ... -- Cordialement/Regards Frank Bonnet ___

Re: Spam/AV filtering

Charles Lamb wrote: I am using sendmail/qpopper and need a way to do spam and virus filtering. There seems to be a number of ports I can use in the ports collection. I was hoping to get some advice on which one you prefer. Start with amavisd-new + spamassassin + clamav. -- -Chuck

RE: Spam/AV filtering

Would I want to enable milter with clamav? Also does amavisd-new actually do the handling? I had clamav installed and it scanned like a champ but that's all it did. It showed me a bunch of viruses/malware but did nothing about it. Thanks. -Original Message- From: Chuck Swiger [mail

Re: Creative Sound Blaster Audigy LS

- Original Message - From: "Luca Micali" <[EMAIL PROTECTED]> To: "Fafa Hafiz Krantz" <[EMAIL PROTECTED]> Subject: Re: Creative Sound Blaster Audigy LS Date: Mon, 16 May 2005 11:04:16 + > > On 5/16/05, Fafa Hafiz Krantz <[EMAIL PROTECTED]> wrote: > > > > Hello. > > > > I've compiled "

Re: The availability of socketbits.h?

In the last episode (May 17), Xu Qiang said: > Dan Nelson wrote: > > It looks like missing.h was added in 1.1.15, but the author didn't run > > all the necessary autoconf commands afterwards. Try running > > "autoheader253" (you will see that a HAVE_FTRUNCATE placeholder gets > > added to config.h

sharing ext3 partition

I have a laptop partitioned up into a mixture of Windows and Linux partitions. I was thinking about wiping the Ubuntu partition and putting FreeBSD 5.4 in its place. However, there are a couple of concerns that I have before doing this. 1) Everything except for the NTFS partition is inside o

Re: Spam/AV filtering

On Tue, 17 May 2005 10:06:22 -0400 "Charles Lamb" <[EMAIL PROTECTED]> wrote: > Would I want to enable milter with clamav? Also does amavisd-new > actually do the handling? amavisd-new works as a sort of in-between tool between the MTA and clamav > I had clamav installed and it scanned like >

Re: Spam/AV filtering

Charles Lamb wrote: Would I want to enable milter with clamav? Also does amavisd-new actually do the handling? I had clamav installed and it scanned like a champ but that's all it did. It showed me a bunch of viruses/malware but did nothing about it. Thanks. That depends on whether you want to

Re: How to use snapshots

fbsd_user wrote: "fbsd_user" <[EMAIL PROTECTED]> writes: I have no idea what you mean by those statements. What floppies are you talking about? The ones in the floppies directory. How do I download the snapshot version with all the files and sub-directors? There are many ways you could do that,

Re: NSSwitch settings on 5.4

On Mon, May 16, 2005 at 09:18:09AM +0930, Ian Moore wrote: > passwd: files ldap > group: files ldap This is correct and sufficient for local files + ldap. > On my 5.4-Release system, the default nsswitch.conf is: AFAIK there never was a "default" nsswitch.conf in FreeBSD 5.4, I always had to c

Re: write failed filesystem full on fresh install of 5.4

On Sun, May 15, 2005 at 05:52:54PM +0200, platanthera wrote: > On Saturday 14 May 2005 23:30, Ross Adams Lippert wrote: > > I'm sorry I was not more specific. > > > > /var has 256MB > > /tmp has 256 > > / has 256 > > /usr has 4500MB > > newfs had been run on everything. > > > > ftp was passive. > >

RE: Spam/AV filtering

On Tue, 17 May 2005, Charles Lamb wrote: Would I want to enable milter with clamav? Depending on your needs, maybe. The clamav-milter lets sendmail reject mail containing viruses immediately, rather than having to receive them and then filter them later. You should also investigate greylisting,

RE: Spam/AV filtering

I'm going to butt my nose in where it doesn't belong and insert my opinion here. :) Here's the setup we run, and it works incredibly well. Sendmail mail/p5-Mail-SpamAssassin mail/spamass-milter mail/spamass-rules mail/spamass-rules_du_jour sysutils/clamav (built with miltering) Add to your .mc fi

RE: Spam/AV filtering

Oops, that should be security/clamav. Where my mind is this morning... On Tue, 17 May 2005, Tony Shadwick wrote: I'm going to butt my nose in where it doesn't belong and insert my opinion here. :) Here's the setup we run, and it works incredibly well. Sendmail mail/p5-Mail-SpamAssassin mail/spam

Re: Daemon Process

At 01:27 AM 5/17/2005, Gowtham wrote: Hi All, Thank you very much for the feedback. Now, suppose I want to write a daemon for Unix in C whose job is to monitor other daemons and restart dead daemons. The daemon may take the list of such daemons to monitor from a file. I want to know how can this be

Re: The availability of socketbits.h?

On 2005-05-17 15:59, Xu Qiang <[EMAIL PROTECTED]> wrote: >Xu Qiang wrote: >> Thanks for your suggestions. Yes, this error is overcome after >> running "autoheader". But now another error of the same type appears: >> - >> mink.c:22: error: conflict

Re: highpoint rocketraid 454 - RAID 1

Thank you Ted, and Bjorn. I really appreciate your help. I will work on this tonight since I have a vector calculus midterm today. So what you're saying Ted is that there is something wrong with my card? For instance, it might be a different revision of some kind? I was actually thinking to swap

Re: NFS read-ahead?

Am Montag, 16. Mai 2005 16:44 schrieb Andrea Venturoli: > Mike Tancsa wrote: > > Offhand, not really, but if you look around via google for > > mount_nfs freebsd "-r" a lot of people suggest r=32768,-w=32768. > > Perhaps use that as a starting point and experiment to see what gives > > you the

Re: Daemon Process

Here is a good example: http://cr.yp.to/daemontools/svc.html Download the source and examine it. >Hi All, >Thank you very much for the feedback. Now, suppose I want to write a >daemon >for Unix in C whose job is to monitor other daemons and restart dead >daemons. The daemon may take the list of

Re: Epson Stylus C86 Printer

>-- Messaggio originale -- >Date: Mon, 16 May 2005 23:02:56 +0100 >From: Chris Hodgins <[EMAIL PROTECTED]> >To: Mike Jeays <[EMAIL PROTECTED]> >Cc: freebsd-questions@freebsd.org >Subject: Re: Epson Stylus C86 Printer >Reply-To: Chris Hodgins <[EMAIL PROTECTED]> > ..

Re: Spam/AV filtering

On Tue, May 17, 2005 at 09:37:22AM -0400, Charles Lamb wrote: > I am using sendmail/qpopper and need a way to do spam and virus > filtering. There seems to be a number of ports I can use in the ports > collection. I was hoping to get some advice on which one you prefer. I > am a bit of a novice

Ping and DUP!s

I have a simple home lan made of three networked FreeBSD PCs and a dsl router, all connected to a hub. The PCs (all pointing at the router as a gateway) have fixed IP address 192.168.10.1, 192.168.10.2, and 192.168.10.3 and the router 192.168.10.100. Now it happens that if I ping form one PC to t

RE: 5.4 install disc1 will not find hard drive

This is not an cable problem. I can use the 5.3 cdrom and the install goes with out a problem. But when I use the 5.4 cdrom on the same PC I get error message no hard drive found. Then I use the 5.3 cdrom again on the same PC and the install goes with out a problem. I have re-downloaded the 5.4 di

Re: Ping and DUP!s

[EMAIL PROTECTED] wrote: I have a simple home lan made of three networked FreeBSD PCs and a dsl router, all connected to a hub. The PCs (all pointing at the router as a gateway) have fixed IP address 192.168.10.1, 192.168.10.2, and 192.168.10.3 and the router 192.168.10.100. Now it happens that if

RE: Spam/AV filtering

On Tue, 17 May 2005, Warren Block wrote: Here's something I wrote on that a while back. It needs to be updated, but it should give an idea: Okay, I updated it. I also moved it into a directory where it should have been, so there's an Apache redirect. The old URL should work, but here's the co

buffer cache size

I think that the buffer cache on my system is not growing sufficiently and wonder if I can I tune it. Here's a snippet from the output of top on my system: Mem: 646M Active, 2905M Inact, 174M Wired, 121M Cache, 112M Buf, 5460K Free Swap: 512M Total, 192K Used, 512M Free I have a MySQL db that's m

Re: buffer cache size

On 2005-05-17 16:32, michael luch <[EMAIL PROTECTED]> wrote: > I think that the buffer cache on my system is not growing sufficiently and > wonder if I can I tune it. > > Here's a snippet from the output of top on my system: > > Mem: 646M Active, 2905M Inact, 174M Wired, 121M Cache, 112M Buf, 5460K

RE: Spam/AV filtering

Well I have amavisd and clamav installed and running but they aren't filtering the viruses I pick up when I do a clamdscan. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chuck Swiger Sent: Tuesday, May 17, 2005 10:27 AM To: Charles Lamb Cc: freebsd-q

gnome-vfs does not compile.

When I try to compile gnome-vfs-2.10.1, I get this : libtool15: link: CURRENT `1000' is not a nonnegative integer libtool15: link: `1000:1:1000' is not valid version information gmake[3]: *** [libgnomevfs-2.la] Erreur 1 That's quite surprising. Why does it say 1000 is not a nonnegative integer ???

Re: gnome-vfs does not compile.

Few really quick questions here: 1. When was the last time you cvsup'd your ports tree? 2. Have you checked to make sure the rest of your ports are current? If 1. is recently, and 2. is yes, then I'd make clean on it and try to use portinstall gnome-vfs and see what happens. If you answered "neve

FreeBSD 5.4 SMP

Hello, I have a new Dell PowerEdge Dual Xeon 2.8 server and the freebsd install 'sees' 1 cpu. It loads the HT right but doesn't see the 2nd cpu at all. I went to rebuild kernel and 'options smp' is not even a choice. I add it along with the others that are mentioned for smp and when I run config

Re: FreeBSD 5.4 SMP

Hmm..having rebuilt kernels for SMP support several times, I can't help but wonder if this is a clean install you're dealing with, or an upgrade from a previous release. In either case, I'd cvsup your src tree with tag=RELENG_5_4, and follow the handbook kernel building instructions step by ste

GimpShop and FreeBSD

Hey, I'm tring to install GimpShop on my FreeBSD laptop ( 5.3 ) but when I run configure this happens: [EMAIL PROTECTED]/configure --prefix=/usr/local checking fd_set and sys/select... yes checking for XmuClientWindow in -lXmu... yes checking for X11/Xmu/WinUtil.h... yes checking for TIFFReadSca

Re: routed daemon

Jim Pazarena <[EMAIL PROTECTED]> writes: > Can the routed daemon co-exist with a CISCO router which, by default, > also responds to routing requests? > > The reason I ask, is that I accidentally installed routed, and it > was running, and my whole network came to a grinding halt, until > I de-act

Re: Creative Sound Blaster Audigy LS

Fafa Hafiz Krantz wrote: That didn't really work :( Any other suggestions? Thanks. -- I'm using mine just fine... I didn't include mine in the kernel yet, I just tested with a kldload, in 5.4: kldload snd_emu10k1 from /var/log/messages: May 16 18:31:34 bsdmoose kernel: pcm0: port 0xa000-0xa01f

Re: GimpShop and FreeBSD

On 5/17/05, Frank Staals <[EMAIL PROTECTED]> wrote: > Hey, > > I'm tring to install GimpShop on my FreeBSD laptop ( 5.3 ) but when I > run configure this happens: Not sure about GimpShop, although gimp is available in the ports collection. Check out /usr/ports/graphics/gimp. You should be able

Re: Creative Sound Blaster Audigy LS

On Tue, 17 May 2005 10:54:51 -0700 Matt Crossley <[EMAIL PROTECTED]> wrote: > Fafa Hafiz Krantz wrote: > > >That didn't really work :( > >Any other suggestions? > > > >Thanks. > > > >-- > > > I'm using mine just fine... > > I didn't include mine in the kernel yet, I just tested with a > kldload,

Re: Creative Sound Blaster Audigy LS

Matt Crossley wrote: Fafa Hafiz Krantz wrote: That didn't really work :( Any other suggestions? Thanks. -- I'm using mine just fine... I didn't include mine in the kernel yet, I just tested with a kldload, in 5.4: kldload snd_emu10k1 from /var/log/messages: May 16 18:31:34 bsdmoose kernel: pcm0:

Re: Creative Sound Blaster Audigy LS

Ariff Abdullah wrote: Works like a charm. It used to be that I needed to compile the emu10kx drivers. Maybe if you included some more information, it would prove to be more useful. What is your dmesg saying when you boot up now? What did it say before? What happens with a kldload snd_emu10k1, fo

Re: gnome-vfs does not compile.

Tony Shadwick wrote: On Tue, 17 May 2005, Gregory Nou wrote: When I try to compile gnome-vfs-2.10.1, I get this : libtool15: link: CURRENT `1000' is not a nonnegative integer libtool15: link: `1000:1:1000' is not valid version information gmake[3]: *** [libgnomevfs-2.la] Erreur 1 That's quite surpr

Re: Creative Sound Blaster Audigy LS

On Tue, 17 May 2005 18:03:21 + Chuck Robey <[EMAIL PROTECTED]> wrote: > Ariff Abdullah wrote: > > >>Works like a charm. It used to be that I needed to compile the > >>emu10kx drivers. > >> > >>Maybe if you included some more information, it would prove to be > >>more useful. What is your d

Video Driver

I'm kind of new to freebsd. I'm using Gnome, and the resolution doesn't go above 600x800. I assume that is because it doesn't have the exact driver for my video card. I have an Intel motherboard, and when I looked it up on Intel's site, they didn't have any FreeBSD drivers for my motherboard, on

Dual Boot question

I have a new machine with two drives. The primary drive came with Windows XP installed, so I installed FreeBSD (5.4. RELEASE) on the slave. I want to dual boot using the Windows boot manager. I found instructions in the faq:

Re: KDE INSALL

On 5/17/05, jean-paul natola <[EMAIL PROTECTED]> wrote: > Hi everyone, I'm new to freebsd and you have seen my previous post I do > apologize, but appraretnly I am unable post from my work email-hence the > hotmail address now. > > I ran make install clean for kde and after 4 days i *think* I'm

J2SE 5.0

Hi I want to install J2SE 5.0 or equivalent on FreeBSD 5.3. I have gone through the distfiles and cannot see anything which indicates there is a freebsd port available or information about incorporation of latest sun upgrades. Does anyone know what is the best way to go about this. Will the su

Re: Creative Sound Blaster Audigy LS

Ariff Abdullah wrote: Audigy *LS* is not the same *Audigy* like other Audigy series, it use different chipset, and unfortunately, not supported in current emu10k driver. -- Ariff Abdullah MyBSD Ah! My mistake. I'm not really up to date on the latest sound cards or video stuff. :) It also doesn

Re: KDE INSALL

jean-paul natola wrote: I ran make install clean for kde and after 4 days i *think* I'm almost done,, I am now at a promt for GNU ghostscript drivers and have NO CLUE as to what to select , my purpose for the FREEBSD install is to run mailscanner , what should I select , if any, for the GN

Re: GimpShop and FreeBSD

On Tue, 17 May 2005 19:28:38 +0200 Frank Staals <[EMAIL PROTECTED]> wrote: > I'm tring to install GimpShop on my FreeBSD laptop ( 5.3 ) but when I > run configure this happens: -- cut -- > configure_tmp: WARNING: *** TIFF plug-in will not be built (TIFF > library not found) *** -- cut -- > I hop

Re: KDE INSALL

Well since i'm totally new to this, I wanted some type of gui, the machine specs are 450 mhz with 256 ram so I guess I should remove the kde install?? I have verified my reverse DNS and it all checks out, and when I subscribed I did get the confirmation request from the list and activated it,

Re: KDE INSALL

On Tue, 2005-05-17 at 14:38 -0400, jean-paul natola wrote: > Well since i'm totally new to this, I wanted some type of gui, > > the machine specs are 450 mhz with 256 ram > > so I guess I should remove the kde install?? > > I have verified my reverse DNS and it all checks out, and when I > s

Re: Creative Sound Blaster Audigy LS

On Tue, 17 May 2005 11:29:26 -0700 Matt Crossley <[EMAIL PROTECTED]> wrote: > Ariff Abdullah wrote: > > > Audigy *LS* is not the same *Audigy* like other Audigy series, > > > >it use different chipset, and unfortunately, not supported in > >current emu10k driver. > > > >-- > > > >Ariff Abdullah

Re: Dual Boot question

--On Tuesday, May 17, 2005 01:14:35 PM -0500 Paul Schmehl <[EMAIL PROTECTED]> wrote: When I select FreeBSD, the box boots to a prompt, flashing F1 and goes no further, periodically beeping. Never mind. It was waiting for me to hit enter. Now all I have to do is change the default boot to FreeBS

Re: Exec format error

Frank Bonnet <[EMAIL PROTECTED]> writes: > Hello > > I recently installed the squidtimes package from ports at 5.4-R > then I have such erreor message when launching it ... > > squidtimes: Exec format error. Binary file not executable. > > A bit strange as make and make install ran smoothly ...

FreeBSD 5.4 EM64T question

HEllo, I just realized my cpu's in my server are xeon em64t's but I used the i386 iso's to install FSD 5.4. Do I have to use the amd64 iso's??? I realized this after running 'portsbd -Uu' and the system dumped in the middle of the operation saying something about the scsi bus reset. -- Jason

Re: FreeBSD 5.4 EM64T question

On May 17, 2005, at 12:51 PM, Jason Lieurance wrote: HEllo, I just realized my cpu's in my server are xeon em64t's but I used the i386 iso's to install FSD 5.4. Do I have to use the amd64 iso's??? I don't know about the EM64T, but I assume they are i386 compatible. I run the i386 ISOs on my op

PR kern/78968 MBuf cluster exhaustion. RFC (solutions)

Hi All, I am seeing this problem as well: a. The kernel is in a tight loop via the fxp driver since there are frames that need to be DMA'd but cannot be because 'b.' b. The fxp driver calls m_getcl( ) which returns ENOBUFS since there are no clusters to satisfy the request. This goes on constan

Re: Epson Stylus C86 Printer

On Monday 16 May 2005 02:35, Mike Jeays wrote: > I have just bought one of these printers, and am having trouble getting > it to work with ghostscript. It is connected via a USB port, and it > responds momentarily when I send anything directly to /dev/ulpt0.   > > I would appreciate the correct par

portaudit is being stubborn

This is driving me nuts. I just downloaded the latest portaudit database and ran it on my system: mx02# portaudit -ad Database created: Tue May 17 13:40:02 CDT 2005 Affected package: wget-1.8.2_7 Type of problem: wget -- multiple vulnerabilities. Reference:

Re: Ping and DUP!s

Alle 18:02, martedì 17 maggio 2005, hai scritto: > [EMAIL PROTECTED] wrote: > > I have a simple home lan made of three networked FreeBSD PCs and a dsl > > router, all connected to a hub. The PCs (all pointing at the router as a > > gateway) have fixed IP address 192.168.10.1, 192.168.10.2, and > >

Newbie Questions

Hi, I've got a couple of questions I was hoping someone could help me with: - I've got an (extremely old) HP Scanjet 4c Scanner hooked up via an Adaptec SCSI card to my system. Freebsd seems to recognize this scanner at boot: May 17 20:48:36 cronus kernel: pass0 at ahc0 bus 0 target 2 lun 0 May 1

RE: NVIDIA Driver on 5.4 RC3

-Original Message- From: Mike Jeays [mailto:[EMAIL PROTECTED] Sent: 10 May 2005 22:00 To: Rod Person Cc: [EMAIL PROTECTED]; freebsd-questions@freebsd.org Subject: Re: NVIDIA Driver on 5.4 RC3 On Tue, 2005-05-10 at 12:37, Rod Person wrote: > On Tue, 10 May 2005 12:24:30 -0400, Joseph Borg

RE: 5.4 install disc1 will not find hard drive

I have been using the same workbench PC to test the building of the install cdrom from disc1.iso and miniinst.iso since version 3.0 through 5.3 without any problems. The 5.3 miniinst and disc1 work as expected. 5.4 does not have an miniinst.iso so used disc1. When 5.4 disc1 install cdrom is used,

Re: Newbie Questions

Joseph Borg wrote: Hi, I've got a couple of questions I was hoping someone could help me with: [snip] - Finally, I've just installed gnome and when it starts up, I get the following error: No volume control elements and/or devices found. The A8V Motherboard on which the system is installed has an i

Re: Newbie Questions

On Tue, May 17, 2005 at 09:58:51PM +0200, Joseph Borg wrote: > Hi, > I've got a couple of questions I was hoping someone could help me with: > > - I've got an (extremely old) HP Scanjet 4c Scanner hooked up via an Adaptec > SCSI card to my system. Freebsd seems to recognize this scanner at boot:

Re: scanner software, dvd software, Gnome sound problem (was:Newbie Questions)

Message: 37 Date: Tue, 17 May 2005 21:58:51 +0200 From: Joseph Borg <[EMAIL PROTECTED]> Subject: Newbie Questions To: Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="us-ascii" Hi, I've got a couple of questions I was hoping someone could help me with: - I've got an (extrem

Re: Video Driver

On Tue, May 17, 2005 at 02:14:46PM -0400, Adam Stern wrote: > I'm kind of new to freebsd. I'm using Gnome, and the resolution doesn't > go above 600x800. I assume that is because it doesn't have the exact > driver for my video card. Try Ctrl+Alt+Keypad-Plus and see if it switches to a higher r

ssh to new ip...

Hi, I'm moving my new freebsd 5.3 box to a new static ip address and I'm worried that once I put it at the isp, I won't be able to ssh to it or anything. Right now it's still at home and has dhcp. I'm not able to ssh from my windoze box over to it thru my router. I'm getting a connection refused

FreeBSD Releng 5.2 => 5.4 Upgrade make Buildworld Failure

I found some information on google about this error being caused with MAKEOBJDIRPREFIX defined in /etc/make.conf but we havent done that. I couldnt find much else. Any help greatly appreciated. Updated the source tree with cvsup: # change "RELENG_4" to "RELENG_3" or "RELENG_2_2" respectively.

Re: FreeBSD Releng 5.2 => 5.4 Upgrade make Buildworld Failure

This may be a 'well duh', so forgive me if it is, but have you tried: (cvsup the src tree, tag=RELENG_5_4) cd /usr/src make clean cd /usr/obj chflags -R noschg * rm -rf * cd /usr/src make buildworld etc etc etc ? Tony On Tue, 17 May 2005, Mikeal Clark wrote: I found some information on google about

Re: ssh to new ip...

Hmm...from home, visit http://www.whatismyip.com Go to work (or whatever the remote site is) and nmap that ip address ssh open? You could also pay a visit to http://www.dyndns.org, set up an account (it's free) and set a client on your freebsd box to update the ip address as it changes to make su

  1   2   >