Message: 37 Date: Tue, 17 May 2005 21:58:51 +0200 From: Joseph Borg <[EMAIL PROTECTED]> Subject: Newbie Questions To: <freebsd-questions@freebsd.org> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="us-ascii"
Hi, I've got a couple of questions I was hoping someone could help me with:
- I've got an (extremely old) HP Scanjet 4c Scanner hooked up via an Adaptec
SCSI card to my system. Freebsd seems to recognize this scanner at boot: May 17 20:48:36 cronus kernel: pass0 at ahc0 bus 0 target 2 lun 0
May 17 20:48:36 cronus kernel: pass0: <HP C2520A 3503> Fixed Processor
SCSI-2 device
May 17 20:48:36 cronus kernel: pass0: 3.300MB/s transfers
Would you know of any software (preferably under gnome/X that I can use to
operate this scanner)?
I've never used it, but the standard answer seems to be SANE:
/usr/ports/graphics/xsane /usr/ports/graphics/sane-frontends
- Secondly, I've also got a NEC IDE DVD-RW drive hooked up which the system recognizes fine. What software can I use to burn DVDs? All I'm looking for is some software (preferably also under X/gnome) that would allow me to make backup DVD's of files I have on the drive (i.e. Data DVDs).
I use dvd+rw-tools (which is not limited to dvd+rw devices, that's just how it started life):
/usr/ports/sysutils/dvd+rw-tools
- Finally, I've just installed gnome and when it starts up, I get the following error: No volume control elements and/or devices found. The A8V Motherboard on which the system is installed has an inbuilt 8.0 sound card. Is there any way I can test this is working under Freebsd. Provided this is the case, how can I eliminate the error in gnome?
First make sure your sound is working. By default, no sound drivers are loaded. See http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/sound-setup.html
The summary is, edit /boot/loader.conf to add the line "kldload snd_driver", then reboot. That loads most of the sound card drivers, so it will probably get it working, although not in the most efficient manner. I'm assuming you are using FreeBSD 5.x, under 4.x the answer may be different.
Thanks for all your help.
Joe
It's best to post one question per message, with a descriptive subject line. Someone who knows the answer is more likely to notice it that way.
Good luck.
- Bob
_______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
