Hello -questions:
I have a failing hdd and could use some input/advice as to a
strategy for replacing it. See below for system/configuration
information (more on request). Based on reported/logged
information and on usage patterns, da1 is the failing drive & I
need to replace it.
Notes:
This sy
On Thu, May 12, 2005 at 03:59:24PM -0500, Ben Hockenhull wrote:
> I only want certain (large, broad) groups of people to be able to login to
> a given server, and I believe I'm looking to implement netgroups to do
> that, but I haven't been able to find any documentation on how to do that
> with F
> Howdy,
> My server has an 18 gig drive in it. I'm looking to do incremental backups
> every night, where my entire /ext partition will be mirrored elsewhere
> (/ext is the only thing with anything special on it that would need to be
> recreated).
> I was thinking of either backing up to my h
"Fafa Hafiz Krantz" <[EMAIL PROTECTED]> writes:
> I'm experiencing a rather unusual delay in between login as:
> and Password: when I SSH in via PuTTY -- it lasts for about 1
> minute, maybe a bit more. How can this be?
Sounds like your name resolution isn't quite what it should be. Delays
like
Hello!
I have a bunch of configuration files which all contain the word,
or the reference to, my dysfunctional network interface lnc0. I used
to have this simple script -- to replace a word in all ASCII files
containing it -- with another word. In this case, I need to replace
the string `lnc0' wi
I have the same experience as Fafa on the login delay, and as Peter
said. It is due to the name resolution process. Is there a way to
disable the lookup for clients who come from an IP with a proper reverse
lookup?
Peter N. M. Hansteen wrote:
"Fafa Hafiz Krantz" <[EMAIL PROTECTED]> writes:
I
Hello :)
For some strange reason, this morning the delay disappeared!
> Define this a bit more. IE: from a remote PC, a remote site, etc.
> If its the latter, then the lagg would be the latency between point
> A and point B. Meaning, if the remote box is miles away, the route
> to it may be d
find / -name '*' -print | xargs grep "lnc0"
- gives you all files in your system with lnc0 ...
perl -pi.bak -pe 's/lnc0/rl0/' file1 file2 ... fileN
- will replace lnc0 - rl0 in all specified files, with backuping of old
files in *.bak
> Hello!
>
> I have a bunch of configuration files which all
Hi,
When trying to install FreeBSD 5.3 on my computer, I get the following error
"No disks found".
But I can install without any problem Linux or Windows on that computer. The
hard disk is IDE 160 GB (Western Digital).
Does anyone have an idea on a solution?
Thanks,
Simon
Hervé Kergou
simon butsana wrote:
When trying to install FreeBSD 5.3 on my computer, I get the following error "No disks found".
But I can install without any problem Linux or Windows on that computer. The hard disk is IDE 160 GB (Western Digital).
Does anyone have an idea on a solution?
5.4 just came out,
> find / -name '*' -print | xargs grep "lnc0"
> - gives you all files in your system with lnc0 ...
>
> perl -pi.bak -pe 's/lnc0/rl0/' file1 file2 ... fileN
> - will replace lnc0 - rl0 in all specified files, with backuping of old
> files in *.bak
Thank you!
*nods in burning respect*
--
Fafa H
On Fri, 2005-05-13 at 05:23 -0500, Fafa Hafiz Krantz wrote:
> > find / -name '*' -print | xargs grep "lnc0"
> > - gives you all files in your system with lnc0 ...
> >
> > perl -pi.bak -pe 's/lnc0/rl0/' file1 file2 ... fileN
> > - will replace lnc0 - rl0 in all specified files, with backuping of ol
* Sergey S. Ropchan [2005-05-13 12:40 +0300]
> find / -name '*' -print | xargs grep "lnc0"
> - gives you all files in your system with lnc0 ...
>
> perl -pi.bak -pe 's/lnc0/rl0/' file1 file2 ... fileN
> - will replace lnc0 - rl0 in all specified files, with backuping of old
> files in *.ba
* Svein Halvor Halvorsen [2005-05-13 12:43 +0200]
> Or one could use with the -i option, since sed is in the base system
^
sed
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
Hi there,
can anyone explain why in the FreeBSD version of tar there isn't any
--delete option?
in the GNU versione of the tar archiving utility we have:
--delete
delete from the archive (not for use on mag tapes!)
(http://unixhelp.ed.ac.uk/CGI/man-cgi?tar)
in the FreeBSD version th
Sergey S. Ropchan wrote:
[ ... ]
Why when you send message - always 2 messages in maillist !?
Sometimes people CC: questions and freebsd-questions.
Otherwise, Mailman sometimes double-posts messages if an error happens,
depending on the granularity of the list batchsize delivery to SMTP, and how
On Fri, 13 May 2005 13:26:09 +0200
Pietro Cerutti <[EMAIL PROTECTED]> wrote:
> can anyone explain why in the FreeBSD version of tar there isn't any
> --delete option?
no idea
> Is there a workaround to make tar deleting a file in the archive
> (without extracting, deleting, re-tarring) ?
gnu
Kris Kennaway a écrit :
On Thu, May 12, 2005 at 02:24:51PM +0200, Herv? Kergourlay wrote:
I change the kernel with the following command
sysctl kern.corefile="/cores/%U/%P%N.core"
Make sure those directories exist and are writable by the user. They
won't be created automatically.
Perica Veljanovski <[EMAIL PROTECTED]> wrote:
> I'm thinking of buying a Fujitsu-Siemens AMILO Pro V2020 laptop which
> has a Pentium M 725 (centrino) processor, Inter 855GME chipset with
> integrated Intel PRO/Wireless 2200BG Fast Ethernet LAN.
>
> Since I'm not at all familiar with with the w
On Friday 13 May 2005 07:52, Mac Mason wrote:
> I run kdm on ttyv8, as recommended by the handbook.
>
> % grep kdm /etc/ttys
> ttyv8 "/usr/local/bin/kdm -nodaemon"xterm on secure
>
> I'm also using the closed-source nvidia drivers. To upgrade them requires
> that I unload nvidia.ko.
>
>
ravi <[EMAIL PROTECTED]> writes:
> On 05/07/05 11:12, Lowell Gilbert wrote:
> > Hmm. Are you sure that you deleted the imake ports before building
> > X.Org? You shouldn't have stale imake dependencies from X.Org if you
> > rebuilt both. And the stale dependencies from other X ports should
>
When its runs ask me for login and password and i dont know them.What to type
for login and password?
And i have on second hard disk windows operating system.
How to swich between them( from FreeBSD to windows and windows to FreeBSD )?
Marko
___
freebs
On Sun, May 15, 2005 at 07:00:43PM +0200, Marko Bukovinsky wrote:
> When its runs ask me for login and password and i dont know them.What to type
> for login and password?
When you installed the system it asked for a root password. Use this
password with the root account. If you added other acc
Ewald Jenisch <[EMAIL PROTECTED]> writes:
> Hi,
>
> For some time one of my machines in plaged be becoming completely
> unresponsive after different amounts of time (several hours up to
> several days).
>
> Symptoms:
> Machine is PINGable, but no access over the network is possible
> (neither ss
fredthetree <[EMAIL PROTECTED]> writes:
> Is there a control somewhere to flip the stereo signal of the soundcard?
I don't think so;
why wouldn't you just flip the inputs instead of the outputs?
___
freebsd-questions@freebsd.org mailing list
http://lis
"mojo fms" <[EMAIL PROTECTED]> writes:
> I did a reinstall recently and since then i can not connect the
> internet using dhclient on that machine. I looked around on google for
> a bit but found nothing that fixed the problem. I checked the PnP OS
> option in the bios, it is already set to No, an
"Reginaldo Tavares" <[EMAIL PROTECTED]> writes:
> I just installed FSB5.4-RELEASE in my laptop, a compaq nx9005. It has
> an ATI video adpter. But something is wrong. The Xserver puts the following
> message:
>
> error: [drm:pid551:radeon_cp_init] * ERROR*radeon_cp_init called without lock
Did
Congratulations on your latest release. We'd love to have this release
listed in our screenshot gallery (http://shots.osdir.com). Posting your
screenshots is an excellent way to promote your product, as submitting
is free and our screenshots are seen by thousands of people daily
(http://www.s
Benjamin Keating wrote:
> I'm running a generic install of FreeBSD 5.4 and would like to setup
> ntpd. ntpdate doesn't do me much good as I rarely reboot, but I took
> the handbooks suggestion of using it anyway (and I've verified it
> works)). Anyway, I'm having trouble setting up ntpd and it'd be
Subhro wrote:
> On 5/13/2005 8:28, Jeff Bethke wrote:
>
>> Hi All,
>> I have a host that has been super relilable without issues. Then,
>> I had a power outage. After that, the host has stayed stable for
>> anywhere from 6 to 48 hours... Then the host mysteriously reboots
>> itself. I swappe
>
> Congratulations on your latest release. We'd love to have this release
> listed in our screenshot gallery (http://shots.osdir.com). Posting your
> screenshots is an excellent way to promote your product, as submitting
> is free and our screenshots are seen by thousands of people daily
>
On Fri, May 13, 2005 at 09:39:36AM -0400, Jerry McAllister wrote:
> >
>
> Since your whole site seems to be about Linux distros, maybe you
> do not understand that FreeBSD is NOT Linux. It is not based on Linux.
> It does not use a Linux kernel.
Not only that but "Why would anyone care what a
Michal Mertl wrote:>
> /etc/ntp directory isn't used by default on 5.4.
> The default location for ntp.drift file is /var/db.
> I've never created it by hand (not even by
> 'touching' it), it gets created automatically.
No, there's no such default as "/var/db/ntp.drift".
It's either "/etc/ntp.dri
On 05/13/05 08:50, Lowell Gilbert wrote:
> ravi <[EMAIL PROTECTED]> writes:
>> On 05/07/05 11:12, Lowell Gilbert wrote:
>
>> > Hmm. Are you sure that you deleted the imake ports before building
>> > X.Org? You shouldn't have stale imake dependencies from X.Org if you
>> > rebuilt both. And the
Back in the day...4.9-RELEASE you were able to install
apache+mod_ssl and mod_php4. Now 5.4-RELEASE requires
apache as a dependency to install mod_php4 and fails
with apache+mod_ssl already installed. Don't know if
this is a problem just I am having. I would like to
end up with my 4.9 config on 5.4
* Joe Capali <[EMAIL PROTECTED]> [20050513 17:21]: wrote:
> Back in the day...4.9-RELEASE you were able to install
> apache+mod_ssl and mod_php4.
Yes.
> Now 5.4-RELEASE requires apache as a dependency to install mod_php4
So what do you want mod_php4 for if not for use with Apach
ravi <[EMAIL PROTECTED]> writes:
> unfortunately, 'pkgdb -F' does not suggest the redirections. perhaps, as
> you seem to suspect ;-), i messed up (or plain forgot) the deletion of
> the imake ports. now that i am in the state i am in, would you consider
> it safe to run 'pkgdb -F' (or -s) and pro
5.4 stable release has finally made
it to the FreeBSD FTP mirror sites.
But the miniinst.iso file is missing.
What gives here?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
I just got a new desktop machine, and I'm reviewing the supported hardware
list on freebsd.org. I don't see anything at all about video cards. Are
they listed in some other place?
I found two messages in the hardware mailing list that mention the ati
radeon x300 card, but the only thing I cou
Jerry McAllister wrote:
>>Congratulations on your latest release. We'd love to have this release
>>listed in our screenshot gallery (http://shots.osdir.com). Posting your
>>screenshots is an excellent way to promote your product, as submitting
>>is free and our screenshots are seen by thousan
On Fri, 2005-05-13 at 09:49 -0500, Paul Schmehl wrote:
> I just got a new desktop machine, and I'm reviewing the supported hardware
> list on freebsd.org. I don't see anything at all about video cards. Are
> they listed in some other place?
>
> I found two messages in the hardware mailing list
In the last episode (May 13), Paul Schmehl said:
> I just got a new desktop machine, and I'm reviewing the supported
> hardware list on freebsd.org. I don't see anything at all about
> video cards. Are they listed in some other place?
FreeBSD only uses the text mode of video cards, so it's compa
I've been given some PDF's that contain annotations, and I need to print them
out. The problem is that the annotations rely on covering up the contents of
the original PDF. Are there any utilities available that will allow me to
incorporate the comments into the pdf and hence get them to print
--On Friday, May 13, 2005 10:14:06 AM -0500 Dan Nelson
<[EMAIL PROTECTED]> wrote:
FreeBSD only uses the text mode of video cards, so it's compatible with
anything. You want to look at www.X.org or www.XFree86.org for X
support.
Duh. Thanks, Dan, and Jason too, for answering so quickly. Should h
These speakers have to be backwards (desk layout & short cords), so if
I could get the mixer to switch the channels, I wouldn't have to worry
about each individual program/input. :)
On 13 May 2005 09:17:07 -0400, Lowell Gilbert
<[EMAIL PROTECTED]> wrote:
> fredthetree <[EMAIL PROTECTED]> writes:
I tryed loading the system with ACPI disabled and it worked just fine. I
have looked through the handbook but i cant seem to find a way to permently
disable it or how to fix the problem through it. Any help on the issue would
be great...
From: Lowell Gilbert <[EMAIL PROTECTED]>
Reply-To: freebs
I have a freeBSD 4.10-RELEASE installation.
On that system, I have, running, a jail with a
4.10-RELEASE userland that is _identical_ to the base
host. It is identical because I dumped the base
systems filesystem and restored it inside the jail.
Everything is working fine. I have never touched a
Gert Cuykens wrote:
i have a the output of the hole building process if necesary
Just to check the obvious, you are doing this as root, yes?
Beyond that I don't think I have any more ideas. Send the *end* of the
build log and we can look at it again and see if anything obvious
strikes. I've
Timothy Smith wrote:
Or try:
setenv LIBIDL_CONFIG `which libIDL-config-2`
or it {ba,z}sh equivalent.
--Alex
ok i just did the following ( i must have mis typed the first tiem or
something ) and the ./configure finished, but it get "Makefile", line
406: Missing dependency operator
Error expandin
Nope, pf is turned off on this host as is all other non-essential* parts
like linux compat and daemons I don't really-really-really need.
I've read through archives and it seems that when the FreeBSD kernel
hits *any* kind of hardware fault.. it reboots! Is there any daemon out
there that catches
Jeff Bethke wrote:
I've read through archives and it seems that when the FreeBSD kernel
hits *any* kind of hardware fault.. it reboots!
Nonsense. If, for example, your memory was duff or overheating, and
that caused a bad dereference in kernel code, then it might, quite
understandably, cause a
Hi all,
seems that tripwire is not updated to run 5.4...
Are there any plans to have the port updated ?
Is it possible to compile it anyways ???
Thanks,
Tim.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-
How to get the best results from FreeBSD questions.
===
Last update $Date: 2004/09/19 02:40:48 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that a
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception. Inev
I was wondering if there is a setting in there under the tag like you
have for the standard-supfile to where its set for 5.4? Or do you just
keep it up-to-date with the current releases everyday?
___
freebsd-questions@freebsd.org mailing list
http://lists
"mojo fms" <[EMAIL PROTECTED]> writes:
> I tryed loading the system with ACPI disabled and it worked just
> fine. I have looked through the handbook but i cant seem to find a way
> to permently disable it or how to fix the problem through it. Any help
> on the issue would be great...
According to
Although quite a bit of time has gone by, I thought I would follow up
this thread with my fix so that future searches of this thread will turn
up the solution.
My solution was to statically compile mod_perl into httpd. Although I
thought the problem was PHP, it turned out not to be. After carefull
mojo fms <[EMAIL PROTECTED]> writes:
> I was wondering if there is a setting in there under the tag like you
> have for the standard-supfile to where its set for 5.4? Or do you just
> keep it up-to-date with the current releases everyday?
I can't parse the question, but the list of supported tags
I'm a recent convert to FreeBSD, mainly because of the jail
functionality. I am trying to figure out a good system for keeping
jails updated and am running against my lack of experience with the
compile-from-source approach as well as the different startup scripts.
I have pretty much settled o
Bill Schoolcraft <[EMAIL PROTECTED]> writes:
> So, while kde3 is still building from ports I copied both full
> iso images to my new FreeBSD box in hopes of maybe mounting them
> in loopback and offering the two ISO images up via
> /stand/sysinstall as a source for packages. I cannot seem to
> ge
Don't top-post, please.
fredthetree <[EMAIL PROTECTED]> writes:
> On 13 May 2005 09:17:07 -0400, Lowell Gilbert
> <[EMAIL PROTECTED]> wrote:
> > fredthetree <[EMAIL PROTECTED]> writes:
> >
> > > Is there a control somewhere to flip the stereo signal of the soundcard?
> >
> > I don't think so;
>
Matt Navarre <[EMAIL PROTECTED]> writes:
> This is with FreeBSD 4.11-RELEASE with no atkbd or psm drivers in the
> kernel and a SiS 5571 USB controller.
>
> Anybody have any idea how to get this working, or have a
> recommendation for a USB keyboard/mouse combo that will work with
> freeBSD and a
On Fri, May 13, 2005 at 07:20:49AM -0700, Joe Capali wrote:
> Back in the day...4.9-RELEASE you were able to install
> apache+mod_ssl and mod_php4. Now 5.4-RELEASE requires
> apache as a dependency to install mod_php4 and fails
> with apache+mod_ssl already installed. Don't know if
> this is a prob
Tim Traver <[EMAIL PROTECTED]> writes:
> seems that tripwire is not updated to run 5.4...
>
> Are there any plans to have the port updated ?
Sure. Those plans came to fruition a month ago.
Update your ports, and the tripwire port should build.
It requires an old gcc version, though, so you'll
On Thu, May 12, 2005 at 12:45:18PM -0400, Chad Morland wrote:
> I was wondering if there is a FreeBSD equivalent to /proc/net/dev from
> Linux. I am trying to get bit and packet counter info from my network
> devices.
Try getifaddrs(3). For every interface, the data you want is found in
the ifa_da
Rob wrote:
> Michal Mertl wrote:>
> > /etc/ntp directory isn't used by default on 5.4.
> > The default location for ntp.drift file is /var/db.
> > I've never created it by hand (not even by
> > 'touching' it), it gets created automatically.
>
> No, there's no such default as "/var/db/ntp.drift".
I've just found it a little inconvienent that FreeBSD dumps dmesg
output into ttyv0.
Here's why.
If you start up the system, and log in on ttyv0, all your X errors
(ie, poor mpegs) are thrown into the same console as your dmesg
output. I much prefer the way certain other unices have set things
u
Problem with this is that I have to then create a tar file on the remote
machine, because if I login with sftp from my remote machine, that account
wont have access to read all the files it needs to read.
-Matt
On Fri, 13 May 2005, Hexren wrote:
Howdy,
My server has an 18 gig drive in it. I'm l
Matt Juszczak wrote:
Problem with this is that I have to then create a tar file on the remote
machine, because if I login with sftp from my remote machine, that
account wont have access to read all the files it needs to read.
you can:
- create a password-protected ssh cert for root
- load key int
Hi Folks,
I have had a Redhat box that was running my radius authentication and
sendmail. Several weeks ago the hard drive in this box crashed. Naturally
:-( I didn't have a backup. This created an emergency - my users could not
get authenticated and could not get email. I didn't have time to s
Karol Kwiatkowski writes:
> For what it's worth (since nobody replied yet) I've got these in
> make.conf (5.4-RELEASE, 5.2.1-5.3-R previously):
>
> SENDMAIL_CFLAGS+= -I/usr/local/include -DSASL=2
> SENDMAIL_LDFLAGS+= -L/usr/local/lib
> SENDMAIL_LDADD+=-lsasl2
Th
The installation of mysql 4.1 went smoothly, and it is running fine
(unlike when I tried to install it on my SUSE 9.1 laptop ), however when
I tried to install mysqlcc I got this:
../../../../../local/include/mysql/mysql.h:469: error: too few arguments
to function `int mysql_shutdown(MYSQL*, my
Alex Zbyslaw wrote:
Timothy Smith wrote:
Or try:
setenv LIBIDL_CONFIG `which libIDL-config-2`
or it {ba,z}sh equivalent.
--Alex
ok i just did the following ( i must have mis typed the first tiem or
something ) and the ./configure finished, but it get "Makefile", line
406: Missing dependency ope
Any word on a driver for this chipset? It doesn't seem to be detected at
all. I have read here: http://sources.zabbadoz.net/freebsd/if_sk.html
that it's not yet supported by the "sk" driver, however other chips of a
similar type are supported. Is there any word on if it's supported
anywhere by
Marko Bukovinsky wrote:
When its runs ask me for login and password and i dont know them.
What to type for login and password?
Well, without sounding too "mean" or "antagonistic", have you
tried your login account name and the corresponding password?
Is it *your* computer? When FreeBSD was inst
Lisa Casey wrote:
Hi Folks,
I have had a Redhat box that was running my radius authentication and
sendmail. Several weeks ago the hard drive in this box crashed. Naturally
:-( I didn't have a backup. This created an emergency - my users
could not
get authenticated and could not get email. I didn'
Hi
Is there a port of Sun's latest Netbeans IDE j2se + v 1.4.2_08 SDK WITH
Netbeans available for freebsd 5.3?
If not has anyone successfully installed Sun's package with linuxemulation? Or
are there any alternative solutions?
Thanks
David
___
freeb
If you had to choose amongst the available filesystems on 5.4 to contain
just about 500kB to a MB, which would you use, and with what parameters ?
Which of these has the lowest administration overhead, the lowest space
overhead ?
TIA
George
___
f
Hello All,
Is there are better driver for my video card than the
standard, generic vga0 driver? My video card is a Diamond
Viper v550 vidoe card which uses the nVidia Riva TNT chip.
The card uses the AGP interface and has 8 MB of SDRAM. The
rest of the important parts of my system are as follow
In the last episode (May 13), [EMAIL PROTECTED] said:
> Is there a port of Sun's latest Netbeans IDE j2se + v 1.4.2_08 SDK
> WITH Netbeans available for freebsd 5.3? If not has anyone
> successfully installed Sun's package with linuxemulation? Or are
> there any alternative solutions?
Netbeans 4.0
Hi
Sorry first postedthis without a subject line
Is there a port of Sun's latest Netbeans IDE j2se + v 1.4.2_08 SDK WITH
Netbeans available for freebsd 5.3?
If not has anyone successfully installed Sun's package with linuxemulation? Or
are there any alternative solutions?
Thanks
David
_
>
> From: Dan Nelson <[EMAIL PROTECTED]>
> Date: 2005/05/13 Fri PM 03:30:08 PDT
> To: [EMAIL PROTECTED]
> CC: freebsd-questions@freebsd.org
> Subject: Re: your mail
>
> In the last episode (May 13), [EMAIL PROTECTED] said:
> > Is there a port of Sun's latest Netbeans IDE j2se + v 1.4.2_08 SDK
>
In the last episode (May 13), [EMAIL PROTECTED] said:
> From: Dan Nelson <[EMAIL PROTECTED]>
> > In the last episode (May 13), [EMAIL PROTECTED] said:
> > > Is there a port of Sun's latest Netbeans IDE j2se + v 1.4.2_08
> > > SDK WITH Netbeans available for freebsd 5.3? If not has anyone
> > > succ
I'll try this on FreeBSD-Questions first, then FreeBSD-Stable if I
don't get an answer here; not sure which is best. I run
FreeBSD-Stable (4.10) with two sound cards: a SoundBlaster AWE64 and
a Turtle Beach Santa Cruz. I use two because I can't get full duplex
with one.
I've always had several
I see two ways you can go about this:
1. Get your radius conf file, and your /etc/master.passwd file. Build a
new FreeBSD 5.4 server.
Install the following from ports:
- portinstall
- portmanager
- portupgrade
- portdowngrade
- freebsd-update
Update your ports and src via cvsup. Install your r
Timothy Smith wrote:
./configure gets
*** The libIDL-config script installed by libIDL could not be found
*** If libIDL was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the LIBIDL_CONFIG environment variable to the
*** full path to libIDL-config.
checking for orbit-config..
Hello,
Any suggestions? I have been using ctorrent, but I am getting a lot of
files it shows that it has downloaded 100%, but if I start it again (to
seed) it was fully completed.
thanks,
Paulo
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the
Azureus
http://azureus.sf.net
On Fri, 13 May 2005, Paulo Roberto wrote:
Hello,
Any suggestions? I have been using ctorrent, but I am getting a lot of
files it shows that it has downloaded 100%, but if I start it again (to
seed) it was fully completed.
thanks,
Paulo
_
At 13 May 2005 it looks like Lowell Gilbert composed:
> Bill Schoolcraft <[EMAIL PROTECTED]> writes:
>
> > So, while kde3 is still building from ports I copied both full
> > iso images to my new FreeBSD box in hopes of maybe mounting them
> > in loopback and offering the two ISO images up via
> >
What's the best way to setup the repository of files from 5.4-RELEASE
for NFS installation purposes?
In earlier releases, because we usually had CDs/ISOs laying around,
we'd simply dump the entirety of -disc1 onto the NFS server's exported
filesystem and the right thing happened during installs.
On Thu, 12 May 2005 22:03:40 -0500
"Kelly D. Grills" <[EMAIL PROTECTED]> wrote:
> On Fri, May 13, 2005 at 02:52:52AM +0200, Pietro Cerutti wrote:
> >
> > Kelly D. Grills wrote:
> > >
> > >Have a look at section 23.3.5 of the handbook. -r=1024 cured my
> > >problems.
> > >
> >
> > Thank you, this
At 13 May 2005 it looks like Lowell Gilbert composed:
> Bill Schoolcraft <[EMAIL PROTECTED]> writes:
>
> > So, while kde3 is still building from ports I copied both full
> > iso images to my new FreeBSD box in hopes of maybe mounting them
> > in loopback and offering the two ISO images up via
> >
Hello Family,
Was installing 5.4 and decided to pick some packages from the
sysinstall menu and found myself being prompted every 2 or 3
packages to take out disk-1 to install disk-2 then take out
disk-1 and install disk-2 etc
Yes, I've installed ports and will work off that now.
In hindsigh
Hello Family,
Well, it's been two days now of watching both from work and from
home the building of "/usr/ports/x11/kde3" and I started this
thinking it would be an hour or two adventure for after about 19
"inserting/reinserting" of disks 1 then 2 then 1 then 2 etc of
just trying to do what I've a
On Friday 13 May 2005 11:19 am, Lowell Gilbert wrote:
> Matt Navarre <[EMAIL PROTECTED]> writes:
> > This is with FreeBSD 4.11-RELEASE with no atkbd or psm drivers in the
> > kernel and a SiS 5571 USB controller.
> >
> > Anybody have any idea how to get this working, or have a
> > recommendation fo
> mount /dev/md1 /mnt/loop1
> mount: /dev/md1 on /mnt/loop1: incorrect super block
>
> mount /dev/md2 /mnt/loop2
> mount: /dev/md2 on /mnt/loop2: incorrect super block
>
Hello,
I think you have to add "-t cd9660" (like when mounting a normal CDROM,
otherwise FreeBSD tries to mount it as a normal
This message appears after building amd installing world and kernel
using the NOINET6=true in /etc/make.conf.
sendmail[1579]: NOQUEUE: SYSERR(root): /etc/mail/sendmail.cf: line
279: Unknown address family inet6 in Family=option
No one uses the Server for sending mail, so I don't know if it is a
p
Is there a hidden file attribute in FreeBSD as there is in Windows?
If so how do I unset it?
Or allow certain users to be able to view the files without unsetting
it.
Sincearly,
Joshua Lewis
[EMAIL PROTECTED]
mobile: 951-637-9190
___
freebsd-questio
Hi, Thanks for the questions. I am using Sendmail as
an MTA:
> *) is your mailserver a public service or a local
> one ?
I can't figure out how to configure this. How do I do
it?
I've tried modifying my /etc/mail/hostname.mc and
running:
make
make install
make restart
...but I can't find clea
On 5/14/05, Abu Khaled <[EMAIL PROTECTED]> wrote:
> This message appears after building amd installing world and kernel
> using the NOINET6=true in /etc/make.conf.
>
> sendmail[1579]: NOQUEUE: SYSERR(root): /etc/mail/sendmail.cf: line
> 279: Unknown address family inet6 in Family=option
>
> No on
1 - 100 of 108 matches
Mail list logo
