> On 2007-10-25 kalin mintchev wrote:
>>
>> hi all...
>>
>> i noticed that when i take my laptop to work and change the network
>> settings in rc.conf before starting xorg after i do startx the whole
>> xorg/gnome experience gets slowed down. first xorg ta
hi all...
i noticed that when i take my laptop to work and change the network
settings in rc.conf before starting xorg after i do startx the whole
xorg/gnome experience gets slowed down. first xorg takes it's time to
start and then load gnome, window manager etc.
and then all applications in gnom
hi all...
having trouble to get the wi0 interface up with WPA. below is the relevant
information. can somebeody explain what the problem is? thanks...
device = 'PRISM 2.5 802.11b 11Mbps Wireless Controller'
wi0: flags=8843 mtu 1500
inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255
> On Tue, 18 Sep 2007 20:37:46 -0400 (EDT)
> "kalin mintchev" <[EMAIL PROTECTED]> wrote:
>
>> motherboard: Supermicro X7DVL-L Xeon 5000V Server Board(MB4284)
>>
>> with:
>>
>> INTELĀ® CPU PROCESSOR 1 Intel Quad-Core Xeon E5335 Proces
hi all...
some input about this hardware on fbsd 6.2 would be appreciated. just
would like to know if anybody has tried successfully something like this
before:
motherboard: Supermicro X7DVL-L Xeon 5000V Server Board(MB4284)
with:
INTELĀ® CPU PROCESSOR 1 Intel Quad-Core Xeon E5335 Processor 2.
hi all
i wanted to put linux-firefox because i read somewhere it can use the
flash plugin. so i got the the linux-firefox on. the thing downloaded and
installed the plugin through the browser plugin interface. now every time
i go to youtube (or any other flash site) the browser crashes
immediately
;t run anything else - like mplayer, xmms, etc - the skype worked
fine. now when i run nothing but skype i still can hear the ring or what
people are saying to me
>
> I have 8 on mine (Intel HDA) and it works fine.
>
> You can set this in /etc/sysctl.conf so it's reset on
hi all..
got skype installed. can't get sound of off it. when i talk people hear me
but i can;t hear rings. sound works fine otherwise - i can listen stuff
with xmms.
in the skype options for hand/headsets the Ringing points to /dev/dsp
same as Calls one but the one for ringing is dimmed and i ca
> On Sun, 1 Jul 2007 18:42:13 -0400
> Robert Huff <[EMAIL PROTECTED]> wrote:
>
>>
>> RW writes:
>>
>> > If you install www/nspluginwrapper, and follow the instructions,
>> > the flash plugin will work with native firefox and opera browsers.
>>
>> This is flash-9, and not flash-7?
>>
>
> Yes
>
> If you install www/nspluginwrapper, and follow the instructions, the
> flash plugin will work with native firefox and opera browsers.
thanks... i'll try that. see what happens
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.
>>
>> ___
>
> I installed linux-firefox and linux-flashplugin9, from the ports.
>
> They compiled flawlessly and work fine.
thanks... but i'm running freebsd. already stuffed this machine with a
lot of linux 'extra'-ware when installing java. i was loo
and which port do i exactly install to be able to whach flash video?
i did the /usr/ports/www/flashplugin-mozilla - didn't work. the other one
is marked as broken...
now that cnn moved to that i can't watch it anymore and i have never been
able to see any of the videos on youtube what do i nee
hi all...
what wold be the the device that is equivalent of /dev/dv1394/0?
it's for kino's install...
thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[E
> I do not know how you installed diablo-jdk it but it definitely takes
> time when installed from ports. First it asks you to download the
> sources for diablo-jdk from
> http://www.freebsdfoundation.org/downloads/java.shtml. Due to
> licensing issues you have to manually download it to
> /usr/po
>> Hello Kaline,
>
> hi there Ivan...
>>
>> What I did was to install the native freebsd jdk,
>> that is diablo-jdk (port java/diablo-jdk) and then I installed
>> java/jdk-15 port.
>
> i'll try that. thanks... will report how it went...
didn't do much. it installed very quickly but after i run th
> Hello Kaline,
hi there Ivan...
>
> What I did was to install the native freebsd jdk,
> that is diablo-jdk (port java/diablo-jdk) and then I installed
> java/jdk-15 port.
i'll try that. thanks... will report how it went...
>
>> after waiting for about 12 hours of compiling i got this awesome
hi all...
very frustrating experience trying to build the jdk15 from ports on 6.2.
after waiting for about 12 hours of compiling i got this awesome crap:
Note: * uses or overrides a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe
>
> cd /usr/ports/multimedia/win32-codecs && make install
yea... i did that... it broke somewhere.. or yea.. right here:
=> Couldn't fetch it - please try to retrieve this
=> port manually into /usr/ports/distfiles/win32 and try again.
i just don't have the patience for this ports thing anym
hi all...
just installed mplayer - pkg_add - and it can not play a simple wmv file
yet. so i got the codecs and apparently the codec for wmv has to be here:
/usr/local/lib/win32/
what about the other ones - like quicktime, *.acm, *ax?! do they all go in
the same directory?
thanks
>
>
>> -Original Message-
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] Behalf Of kalin mintchev
>> Sent: Thursday, May 24, 2007 4:11 PM
>> To: freebsd-questions@freebsd.org
>> Cc: [EMAIL PROTECTED]
>> Subject: Re: raid or not ra
> On Fri, 25 May 2007 04:37:25 -0400 (EDT)
> "kalin mintchev" <[EMAIL PROTECTED]> wrote:
>
> replying to your email down the thread...but using this content...
>
>> L(q) ops/sr/s kBps ms/rw/s kBps ms/w %busy Name
>> 0 6
>> how come there is ad4s1b and ad4s1c when those names don't appear in the
>> fstab or df?
>
> Very often ad4s1b will be the swap and ad4s1c the full slice.
>
> That is not an absolute rule, but it is very much recommended (at
> least for ad4s1c) to keep it equivalent to the full slice.
but there
> On Thu, 24 May 2007 19:11:27 -0400 (EDT)
> "kalin mintchev" <[EMAIL PROTECTED]> wrote:
>
>> unless "at device 31.2 on pci0" points to some RAID evidence - which i
>> think it's false - than i read this as the ad6 disk sits there unused.
>
> On Thu, May 24, 2007 at 06:30:06AM -0400, kalin mintchev wrote:
>>
>> so nobody on this list knows anything about raid?
>> wrong list?
>>
>> > hi all..
>> >
>> > i have a box in a remote hosting facility that claims that the machine
>>
> Also what type of RAID? If it's Hardware RAID _and_ it's using a 3ware
> card,
doubt it. i don't see anything that ponts to that in the pciconf output..
> you can install tw_cli from /usr/ports/sysutils. It's a nice
> little utility and will show you the status of your units/ports/drives
> a
>> >
>> > i have a box in a remote hosting facility that claims that the machine
>> has
>> > two discs raided in it but df and fstab show only one disc with a
>> bunch of
>> > slices.
>> > under devices there is another name - ad6 - but it's not mounted
>> anywhere.
>> > the one i see both in df an
so nobody on this list knows anything about raid?
wrong list?
> hi all..
>
> i have a box in a remote hosting facility that claims that the machine has
> two discs raided in it but df and fstab show only one disc with a bunch of
> slices.
> under devices there is another name - ad6 - but it's not
hi all..
i have a box in a remote hosting facility that claims that the machine has
two discs raided in it but df and fstab show only one disc with a bunch of
slices.
under devices there is another name - ad6 - but it's not mounted anywhere.
the one i see both in df and the fstab is ad4 with one b
hello...
how painful is to upgrade srcs from 6 to 6.2? all backup and stuff?
thanks...
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
> Hi,
> I would want a suggestion for an antispam for my email.
> I use getmail-procmail-mutt in order to receive the mail.
> Thanks.
dspam.
> --
> Isaia Luciano
> FreeBSD user
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd
> hi all..
>
> is it possible to limit access for certain users only to a certain
> directory tree - other then his/her home directory?
so... can i do that or not?
> for example joe logs into his home directory where there is a symbolic
> link to some other directory on the system but he can n
hi all..
is it possible to limit access for certain users only to a certain
directory tree - other then his/her home directory?
for example joe logs into his home directory where there is a symbolic
link to some other directory on the system but he can not go up a level
(to /home or / ) or anywhe
>>>make -V REINPLACE_CMD
>>
>>
>> a new line absolutly nothing.
>>
>>
>>> in the Ghostscript port directory? It should look like this:
>>>
>>> happy-idiot-talk:...ports/print/ghostscript-afpl:% make -V
>>> REINPLACE_CMD
>>> /usr/bin/sed -i.bak
>
> OK. That's what is causing the prob
> On Wednesday 24 January 2007 1:10 pm, kalin mintchev wrote:
>
>> options screen!!! i'd love an option screen
>> whats the command line option to ignore options??
>
> What version of FreeBSD are you using?
on that machine 4.10. i know its old but also the gh
> kalin mintchev wrote:
>>> Forget about src. Try updating your ports. Try
>>> ghostscript-afpl.
>>
>> ok... same crap:
>>
>>>>> extracting gs6.0.lexmark7000.patch ...
>> ===> Patching for ghostscript-afpl-8.54,1
>> ===>
> On 2007/01/24 7:35, kalin mintchev seems to have typed:
>>
>> all the nox11 ones are breaking at the same place - the freakin'
>> gs6.0.lexmark7000.patch
>>
>> i don;t want all this drivers... i just need cli utility to turn a
>> postscript file int
all the nox11 ones are breaking at the same place - the freakin'
gs6.0.lexmark7000.patch
i don;t want all this drivers... i just need cli utility to turn a
postscript file into an image - jpg or png.. it seams its only doable
with ghostscript...;
> On 1/24/07, kalin mintchev
>
> Forget about src. Try updating your ports. Try
> ghostscript-afpl.
ok... same crap:
>>> extracting gs6.0.lexmark7000.patch ...
===> Patching for ghostscript-afpl-8.54,1
===> Applying FreeBSD patches for ghostscript-afpl-8.54,1
-e: not found
*** Error code 127
Stop in /usr/ports/print/g
> On 1/24/07, kalin mintchev <[EMAIL PROTECTED]> wrote:
>> hi all...
>>
>> i have a problem compiling ghostscript...
>> no mater what version i am using and using the newest port i always get:
>>
>> gcc: ./src/genconf.c: No such file or directory
>&
hi all...
i have a problem compiling ghostscript...
no mater what version i am using and using the newest port i always get:
gcc: ./src/genconf.c: No such file or directory
gcc: No input files specified
*** Error code 1
apparently that happens only on freebsd...
any ideas to solve this...
hi all..
can i run freebsd 6.* on a dual duo core xeon machine using full cpu
capacity?
does freebsd run on duo core Intels - i know it does on amds...
thanks...
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/f
thanks a lot for all the replies so much help on this list
$ mozilla
(Gecko:79673): GLib-GObject-WARNING **: cannot register existing type
`GConfClie nt'
(Gecko:79673): GLib-GObject-CRITICAL **: g_object_new: assertion
`G_TYPE_IS_OBJE CT (object_type)' failed
(Gecko:79673): GLib-GObje
hi all
i just wanted to install gaim. did update the ports and then went on to
install gaim wich installed a new pango that toally f-ed up my x. now i
can not use it anymore. sorg starts and then when it comes to fire up
gnome xorg crashes with some thread errors.
i think the issue is the new p
>> ===> Patching for pdflib-6.0.3
>> -e: not found
>> *** Error code 127
>>
>> Stop in /usr/ports/print/pdflib.
>>
>>
>> what is not found?!!??!?!?!
>
> Are you sure patch is working?
no. how do i know that? wasn't there something like a work log somewhere -
i can't find it under this port...
th
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of kalin
> mintchev
> Sent: Wednesday, June 14, 2006 5:38 PM
> To: freebsd-questions@freebsd.org
> Subject: error 127
>
>
>
> i'm getting a lot of this crap latle w
i'm getting a lot of this crap latle with the ports... what is going on?!!
===> Patching for pdflib-6.0.3
-e: not found
*** Error code 127
Stop in /usr/ports/print/pdflib.
what is not found?!!??!?!?!
___
freebsd-questions@freebsd.org mailing li
hi.. i'm trying again to make my wepkey work..
i load manually wlan_wep. then do this in order:
ifconfig wi0 ssid here-and-now channel 6
ifocnfig wi0 wepmode on
ifconfig wi0 wepkey 1:0x7924092374273503745WEPKEYSTUFF
dhclient wi0
using bind dhclient
i get:
wi0: timeout in wi_cmd 0x0002; event s
> here:
> # make install clean
> ===> eclipse-3.1.2 depends on executable: ant - found
> ===> eclipse-3.1.2 depends on executable: zip - found
> ===> eclipse-3.1.2 depends on executable: unzip - found
> ===> eclipse-3.1.2 depends on executable: mozilla - found
> ===> eclipse-3.1.2 depends
>
> /usr/ports/databases/mysql50-server/
> /usr/ports/databases/mysql51-server/
>
> I suggest you familiarize yourself with the search feature at
> http://www.freebsd.org/ports/
thanks. familiar with it... doesn't always work... look for
mplayer-plugin for example... i've tried to build this fo
> On Thursday, 23 March 2006 at 0:52:18 -0500, kalin mintchev wrote:
>>
>> hi all...
>>
>> i can't see the mysql 5 version for freebsd 6.0 on the mysql developer
>> site?
>> am i blind or it's on purpose?!?!
>
> No, it's on its
hi all...
i can't see the mysql 5 version for freebsd 6.0 on the mysql developer
site?
am i blind or it's on purpose?!?!
curious... and actually need it...
thanks...
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/m
>>
>> You need to make sure this command works:
>>
>> pkg-config --exists firefox-plugin
>>
>> If you're building against seamonkey, then this command must succeed:
>>
>> pkg-config --exists seamonkey-plugin
>>
>> These commands check for the existence of a -plugin.pc file in
>> /usr/X11R6/libdata/
> kalin mintchev wrote:
>
>>===> eclipse-3.1.2 depends on shared library: cairo.2 - not found
>>===>Verifying install for cairo.2 in /usr/ports/graphics/cairo
>>===> cairo-1.0.2_1 is marked as br
what do i need to add to this information to get some help?
>> You forgot to tell us WHICH model of ThinkPad concerns you. Modems in
>> older ThinkPads, such as a T21 or A20m may be supported by the
>> comms/ltmdm port.
>
> ok... i have the ltmdm installed. i run the ltmdm.sh. nothing happens.
>
> You forgot to tell us WHICH model of ThinkPad concerns you. Modems in
> older ThinkPads, such as a T21 or A20m may be supported by the
> comms/ltmdm port.
ok... i have the ltmdm installed. i run the ltmdm.sh. nothing happens.
i load the ltmdm module manualy with kldload. it's loaded. now what?
> Have you tried /usr/ports/comms/mwavem ?
thanks David... i'll try it but this one is way newer - it's a t30...
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send a
hi all...
is there a win modem driver in 6.0 that can be used with the build-in
modem on ibm thinkpads?
thanks...
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mai
>
> I noticed you CC'd freebsd-java & freebsd-questions but didn't CC
> freebsd-eclipse@ Have you searched their archives? Tried the
> WITHOUT_CAIRO=yes knob? What kind of system are you trying to build
> this on?
thanks Micah.. i'm not sure if i want to exclude cairo from the build.
i'm not
i realize that there are more important discussions here but the eclipse
port is still looking for cairo.2 and apparently cairo.2 doesn't really
exist.. the latest one is 1.0.2 which i installed from scratch...
>
> hi all...
>
> eclipse build breaks with:
> ===> eclipse-3.1.2 depends on sha
hi all...
eclipse build breaks with:
===> eclipse-3.1.2 depends on shared library: cairo.2 - not found
===>Verifying install for cairo.2 in /usr/ports/graphics/cairo
===> cairo-1.0.2_1 is marked as broken: Unknown component ltverhack.
*** Error code 1
Stop in /usr/ports/graphics/cairo.
hi all...
in 5.4 there used to be a fader that controlled the recording level under
Sound & Video > Volume Control.. now in 6.0 is gone and i need to turn it
up so skype people can hear me - i can hear them just fine...
when i try the recorder it doesnt record anything either...
where to look
> which port is gnome-config part of? somewhere underl devel?!
nevermind. now if i installed firefox 1.5 where firefox-plugin?!
what do i need to get it?
> thanks...
>
>
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.or
hi...
i have gnome installed but gnome-config is missing
which port is gnome-config part of? somewhere underl devel?!
thanks...
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscri
>
> You need to install a mozilla browser and have the headers available
> for mplayerplug-in.
i know. but i'm using the port. and have 2 mozilla browsers installed...
i'll get the src later and i gess look for gecko libraries...
> -Garrett
> ___
> fr
i just realized that the attached log might not have been received by
anybody... i didn't it gets filtered.. awesome...
here is the end of it:
## --- ##
## confdefs.h. ##
## --- ##
#define PACKAGE_BUGREPORT "[EMAIL PROTECTED]"
#define PACKAGE_NAME "mplayerplug-in"
#define PACKA
> How exactly are you trying to build mplayer-plugin? Did you use FreeBSD
> port (www/mplayer-plugin)?
hi Adi... yes, i used the port...
> Please be more specific
there is a lot of information in the log attached to the first message.
updatetd the www ports. the plugin version is 3.20... on a
hi all...
mplayer-plugin build failure. here is where it stops and the log is attached.
what to do? thanks
configure: Determining mozilla/firefox packages to link against
checking for pkg-config... /usr/local/bin/pkg-config
checking for firefox-plugin... gnome-config: not found
gnome-config:
> not positive, but i think this no longer works...
ok.. thanks. i found it in the net-mnmt ports. why is it there if it
doesn't work?
is there anything else like it in the ports (or online)?
thanks..
> On Sat, 11 Feb 2006, kalin mintchev wrote:
>
> :
> : hi all
>> according to the man page of ifconfig in 6.0 the wepkey should be 5
or
>> 13 characters
> ^ascii
> comes out to a bit more in hex :-)
> just enter wepkey 309EFC5AB8
what do you mean?
i'm confused now... sorry. the key is generated by the point - wireless
router. and i get an hex st
hi all...
according to the man page of ifconfig in 6.0 the wepkey should be 5 or
13 characters. the wep key i always had is way longer than 13 characters
128 bit - one key only.. so when i try to set it up to the wi0 i get:
# ifconfig wi0 wepkey 1:0xWEPKEY128BITENCRYPTIONBLAHBLA
ifconfig: S
ody?!
i lost too much time on this... i mean it's dhclient its not even
trying to make RAID work... sorry to say i'm going back to 5.4...
unless somebody has a quick workaround...
thanks to the people that tried to help..
> thanks
>
>
>
>>
>> 2006/2/3
AIL PROTECTED]>:
>>
>> Hi there,
>>
>> kalin mintchev wrote on 2006-02-03 at 13:55:01 CET:
>> > > 2006/2/3, make stuff up <[EMAIL PROTECTED]>:
>> > >
>> > >> thank you... does that mean back to 5.4 for now?
>> > >
>&g
> 2006/2/3, make stuff up <[EMAIL PROTECTED]>:
>
>> thank you... does that mean back to 5.4 for now?
>
> Try install /usr/ports/net/isc-dhcp3-client/
without a connection?
>
> --
> Cris, member of G.U.F.I
> Italian FreeBSD User Group
> http://www.gufi.org/
> ___
vided here before i do that..
any input will be appreciated...
thanks you...
> thanks here:
>
> # pciconf -lv |grep multimedia
> # pciconf -lv | grep audio
> #
>
> and the dmesg is attached thanks..
>
>
>> kalin mintchev wrote:
>>
>&
what does the httpd log say?
> I'm entirely new to FreeBSD, but have a fair amount of Linux
> experience.
>
> I installed FreeBSD 6.0 (Production Release) on an oldish i386
> system. During the install, I asked to install "ALL". The
> install went flawlessly.
>
> I need Apache on this system fo
thanks here:
# pciconf -lv |grep multimedia
# pciconf -lv | grep audio
#
and the dmesg is attached thanks..
> kalin mintchev wrote:
>
> -Original Message-
> From: "kalin mintchev" <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Date: Th
rn red and say 'we are not
supporting your machine then. you have to reimage (?!?) it'. uhh..
reimage?!?... ok...
>
>>
>>
>> -Original Message-
>> From: "kalin mintchev" <[EMAIL PROTECTED]>
>> To: freebsd-questions@freebsd.org
rd where the ram slots are?!
>
>
> -Original Message-
> From: "kalin mintchev" <[EMAIL PROTECTED]>
> To: freebsd-questions@freebsd.org
> Date: Thu, 12 Jan 2006 02:13:41 -0500 (EST)
> Subject: missing /dev/dsp
>
>
>
> hi all..
>
> i sent my t30
hi all..
i sent my t30 to ibm to replace a not working ram slot and i got it back
in less then 48 hrs. pretty good. except the /dev/dsp is missing.
i don't see any cards in the dmesg but i know that the audio card is
"SoundBlaster compatible". my system is 5.4 and according to the handbook
d
ly a port as widely used and
popular as firefox..
>
> Teo
>
>
> On 12/21/05, kalin mintchev <[EMAIL PROTECTED]> wrote:
>>
>>
>> this is getting pretty retarded.. i rebuild nspr..
>>
>> nsCanvasRenderingContext2D.cpp:2040: error: `cair
this is getting pretty retarded.. i rebuild nspr..
nsCanvasRenderingContext2D.cpp:2040: error: `cairo_set_source_surface'
undeclared (first use this function)
nsCanvasRenderingContext2D.cpp:2041: error: `cairo_paint_with_alpha'
undeclared (first use this function)
gmake[4]: *** [nsCanvasRenderin
>
> Do you, perhaps, need to update your nspr port?
> If possible, update all your other ports before trying to build the
> new firefox...
just did... the problem isn't there ... i got the same error. here:
nsDNSService2.cpp:116: error: `PR_EnumerateAddrInfo' undeclared (first use
this function)
thanks... but i'm not a huge fan of pkges... i prefer the ports..
i'd ratter build it then use builded stuff.
i tried tonight again. updated ports but the firefox or mozilla ports
were unchanged...
when will the port be usable? i miss firefox already...
thanks...
> k
i'm trying to build libxml2 from ports on a 4.10 machine...
i just get:
gmake: Makefile: no such file or directory.
that's not true - the file is where it shuold be. permissions are fine too...
?!?!??!
thanks.
--
___
freebsd-questions@freebsd
hi all...
trying to build firefox firefox-1.5 from ports.
machine: 5.4-RELEASE FreeBSD 5.4-RELEASE #0: Mon Aug 15 20:16:14 EDT 2005
upgraded www ports last night and today. mozilla port was updated today
agian. port build stops at the same place. pkg_add -r brings down 1.0.3. i
had 1.0.6... anyb
hi...
how long should take to build openofice2 from ports?!
it has been going on for almost 24 hours now...
--
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail t
hi all...
there used to be those freebsd builds for OO on the open office site but
i don't find them on the freebsd page now.. it takes a long time
to build from ports so i was wondering if those buids can still be found
somewhere...
thanks...
___
>
> # ls -la /tmp
also /var/tmp
look for netstat and rpcd under those...
if you run awstats or phpBB - upgrade...
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any ma
>
>> For finer-graines access control, you can try Mandatory Access Control,
>> see .e.g. mac(4) and ugidfw(8) or mac_mls(4) and setfmac(8).
>
> thank you.. will try those...
there is one problem:
HISTORY
Support for Mandatory Access Control was introduced in FreeBSD 5.0 as
part of the
> No you can't. But those directories cannot be written to by normal
> users.
aware of that...
> For finer-graines access control, you can try Mandatory Access Control,
> see .e.g. mac(4) and ugidfw(8) or mac_mls(4) and setfmac(8).
thank you.. will try those...
--
__
>
> chmod 750 directory/
>
thanks...
i can't do that to /etc or /usr..
--
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
i just saw this. just my opinion... i was going to keep to myself but...
i like freebsd a lot.
> The people who run the project decided to create a
> new logo.
ok...
> It sucks
big time... like, really. it looks like a pig head from the future or
something...
> but hey, it is better than
hi all...
i was reading the login.conf man to figure out a way to limit user from a
class to only certain directories. apparently that isn't possible there.
there is a path, but thats $PATH for the particular user... not really
what s/he can see or not...
if i can not restrict user cd-ing into
what happened to kate in 5.4. kde base isntalled. a lot of K* stuff but i
didn't find kate - what's up with that?
--
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any m
>
> My guess is SpeedStep.
but my laptop is always using ac not battery...
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "[EMAIL PROTECTED]"
>
--
hi all
just noticed this i the dmesg:
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz (1196.12-MHz 686-class CPU)
it says 2.20GHz but then only 1196.12MHz - it looks like it only uses half
of the cpu power.. why?
thanks
--
___
freebsd-ques
hi all...
suddenly today out of nowhere this happens (log below) and now i get
vchkpw core dumps every few minutes or so. vchkpw is authorization module
for vpopmail... does this mean the disk where vpopmail lives - ad2 - is
already craping up?! thanks...
here is the log:
Aug 31 22:53:33 c
got it. thanks...
> kalin mintchev wrote:
>>
>> hi all...
>>
>> i have a new 5.4R installation on t30 thinkpad. trying to get the sound
>> drivers in the kernel.
>>
>> adding:
>> device pcm
>>
>> doesn't work. it used to
hi all...
i have a new 5.4R installation on t30 thinkpad. trying to get the sound
drivers in the kernel.
adding:
device pcm
doesn't work. it used to work with 5.3. adding 'device sound' didn't do
much. when i start x i get 'No volume control elements and/or devices
found'
is there any other d
good advices... didn't know about the atacontrol thank you all...
> On Sun, 7 Aug 2005, kalin mintchev wrote:
>
>> can i just hook up a laptop hdd in a desktop machine?
>
> Yes, with a 40-to-44-pin IDE adapter. The pins on a 2.5-inch laptop
> drive are spaced
1 - 100 of 150 matches
Mail list logo