what do i need to add to this information to get some help? >> You forgot to tell us WHICH model of ThinkPad concerns you. Modems in >> older ThinkPads, such as a T21 or A20m may be supported by the >> comms/ltmdm port. > > ok... i have the ltmdm installed. i run the ltmdm.sh. nothing happens. > i load the ltmdm module manualy with kldload. it's loaded. now what? > > here is what i have for a modem: > > [EMAIL PROTECTED]:31:6: class=0x070300 card=0x051a1014 chip=0x24868086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller' > class = simple comms > subclass = generic modem > > the machine is a t30 thinkpad. > > i also have a pcmci 3COM modem card that shows up as: > > sio4: <3Com 3CXM/3CCM556> at port 0x2f8-0x2ff irq 11 function 0 config 33 > on pccard0 > sio4: type 16550A > sio4: unable to activate interrupt in fast mode - using normal mode > > not sure what normal mode is. and i don't see it in the pciconf. > > i have a ppp.conf which looks exactly as the one in the handbook. when is > start ppp after a while i get the propmpt and after that if i type: dial > _tag_ the machine freezes... > > the pci irqs in the bios are all 11. i guess i have to make them all > auto?! > > i just need one of these modems... just one.... > > thanks for any help... > > > > > _______________________________________________ > [email protected] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" >
_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
