Dear list,
the audio software I use sometimes seems to handle unappropriately its
input and leave the sound system in a strange state. When this happens,
the lowest frequencies of the played sound are very attenuated and what
is still audible sounds unpleasantly metallic. Rebooting the machi
Leonidas Tsampros wrote:
I'm pretty sure that a small difference in execution time does not mean
that the produced code is different.
Actually, execution time of a process is very sensitive to the
environment of this process. See for instance:
http://www-plan.cs.colorado.edu/diwan/asplos09.p
> Message du 25/12/09 17:06
> De : "Anton Shterenlikht"
> A : "Uwe Laverenz"
> Copie à : freebsd-questions@freebsd.org
> Objet : Re: freebsd for children
>
> On Fri, Dec 25, 2009 at 04:56:21PM +0100, Uwe Laverenz wrote:
> > Anton Shterenlikht schrieb:
> >
> > > Can somebody recommend a graphical p
Peter Steele wrote:
Can anyone recommend a quick and dirty way to sort a device list? For example,
if I do this:
I need to skip the device prefix before applying the -g option. Something like
this works:
ls /dev/ad*|sort -g -k 1.8
/dev/ad4
/dev/ad6
/dev/ad8
/dev/ad10
but this assumes the de
Hello David,
thank you for your comments,
David N wrote:
2009/10/29 Michaël Grünewald :
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_DescriptionStatus Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline
Polytropon wrote:
On Tue, 27 Oct 2009 21:05:39 +0100, Michaël Grünewald
wrote:
I have however a question: How do I verify that
a hard-drive is accurately working if its firmware will hide the bad
sectors as long as possible?
I think the smartctl program from ports/smartmontools is
a good
Many thanks to the contributors of the list for their input on this
question! I always got quick and detailed answer to my questions on this
list, which is very appreciable in this time of (small) trouble.
(I feel sorry for the very poor english I demonstrated in the message I
wrote this morni
I have set up a FreeBSD access point, it is equipped with a ralink based
card and works most of the time. I would appreciate some help for
troubleshooting ``the rest of the time''. Thanks!
First there is nothing fancy about my wirelesse setup, I merely use the
ralink card as an ethernet switch
per...@pluto.rain.com wrote:
Mel Flynn wrote:
However, thinking about this inquiry and JPEG in the same sentence
has given me an idea that might help the OP: JPEG is a "lossy"
compression, with the degree of loss related to the chosen image
quality, so two "similar" images might become identic
Gary Kline a écrit :
If this were only true! ...But as I understand it, corporations like
the RIAA forbid me from making a backup of a CD or DVD that I *own*.
(E.g, a 6-CD set of Shostokovich).
While this thread is off-list and is probably annoying many people here, I
cannot refrai
prad a écrit :
i need greek letters for math work.
latex has the fonts of course, but i don't have the \mu \ro etc on
regular programs such as inkscape.
i've installed texcm-ttf, but only go a couple of greek letters.
Most commonly, Type1 (read ``PostScript vector'') TeX fonts are present
on
Polytropon wrote:
On Mon, 15 Sep 2008 10:31:57 -0400, John Almberg <[EMAIL PROTECTED]> wrote:
I am working on some software that must, as it's final output,
produce a printout of a directed graph... nodes, connected by
directed links.
The printout could be generated by a postscript file, jp
istory, so it is best to
avoid top-posting.)
- Original Message -
From: "Michaël Grünewald" <[EMAIL PROTECTED]>
To: "EdwardKing" <[EMAIL PROTECTED]>
Sent: Wednesday, August 13, 2008 1:46 PM
Subject: Re: How to visit U disk?
EdwardKing wrote:
I want to
Hi all,
I am planning to distribute some of the makefiles I wrote on various
platforms, including FreeBSD. I need the help of some insightful soul to
take a few decisions:
--- Where to install? I think /usr/local/share/mk is fine;
--- How to install? Users should put a
`.MAKEFLAGS: -I/usr/lo
Seth Brundle wrote:
Hallo Liste,
Hallo Freund,
nach Update auf RELENG_7 und Update der Ports ist nun mein Scrollrad
verschwunden... :-(
Ein wenig gegurgle zeigt mir hier, daß ich nicht der einzige bin --
allerdings habe ich keine Lösung finden können.
moused(8) läuft bei mir, zusammen mit f
Robert Huff a écrit :
=?ISO-8859-1?Q?Micha=EBl_Gr=FCnewald?= writes:
> when checking /usr/ports/emulators/linux_base I find different versions:
>
> - linux_base-f7
> - linux_base-fc4
> - linux_base-fc6
> - linux_base-gentoo-stage1-3
>
> what is the right version to apply to avoid iss
Bernd-Michael Ruhe a écrit :
Hi all,
when checking /usr/ports/emulators/linux_base I find different versions:
- linux_base-f7
- linux_base-fc4
- linux_base-fc6
- linux_base-gentoo-stage1-3
what is the right version to apply to avoid issues?
Hi,
I installed linux_base-fc4 yesterday, and it s
Andrew Falanga a écrit :
Hi,
A few quick searches on freshports.org didn't turn up much so I'm
hoping that the knowledge here will eclipse it. Are there any good,
or workable, scriptable WMA to MP3 converter programs in ports?
Mplayer pretends it can handle WMA files, however I did not try th
Kelvin Woods a écrit :
On Tue, March 11, 2008 16:27, Michael Ross wrote:
Michaël Grünewald schrieb:
Hi,
I am looking for a program able to make a remote FTP site look like
a
copy of a local dir. I feel as if I were dunce-cap-awards(R)
nominated,
but I really did not find one!
In ports/ftp
Michael Ross a écrit :
Michaël Grünewald schrieb:
Hi,
I am looking for a program able to make a remote FTP site look like a
copy of a local dir. I feel as if I were dunce-cap-awards(R)
nominated, but I really did not find one!
In ports/ftp many programs say they do the reverse, and a few
Hi,
I am looking for a program able to make a remote FTP site look like a
copy of a local dir. I feel as if I were dunce-cap-awards(R) nominated,
but I really did not find one!
In ports/ftp many programs say they do the reverse, and a few say they
``mirror'' without more explanation. I gave
Catalin Miclaus wrote:
Hello guys,
What is the right way of building packages for non-ports applications?
AFAIK 'make package' and ' pkg_create -b name' are based on ports
installed packages.
Is there any way of using same commands or additional scripts to achieve
similar results?
If it m
Wojciech Puchar wrote:
/dev/ad10s1h or /dev/ufs/LIBRARY as special argument of mount).
Was this behavior remarked by others? I have not found a PR about
this, I maybe should do this, right?
this is right behaviour. you may use the device many times if read-only,
but not read-write.
Fine, t
Hi,
I have an UFS partition mounted read-only. There is a label on it, and
it appears twice under dev: as ad10s1h and as ufs/LIBRARY. Unlike
RW-mounted filesystems, the entry under ufs is not deleted after
mounting (either using /dev/ad10s1h or /dev/ufs/LIBRARY as special
argument of mount).
Le 7 févr. 08 à 23:01, Mel a écrit :
Hi,
On Tuesday 05 February 2008 13:05:12 Michaël Grünewald wrote:
I am seeking for a word in advice in how to automatically tweak some
applications, possibly making packages for them.
The current solution is: I have a post install shell script that
Dear FreeBSD folks,
I am seeking for a word in advice in how to automatically tweak some
applications, possibly making packages for them.
Long version:
The XDM software provides an example to illustrate the issues: I have
written scripts and configuration files that tweaked XDM to my fancy,
and
Javier Elizondo <[EMAIL PROTECTED]> writes:
> Last login: Sun Jan 20 14:32:18 on ttys001
> perl: warning: Setting locale failed.
> perl: warning: Please check that your locale settings:
> LC_ALL = (unset),
> LANG = "UTF-8"
> are supported and installed on your system.
> perl: warni
ann kok <[EMAIL PROTECTED]> writes:
> how about this
>
> cat file | sed 's/\/32//g' |tr -s "," "\n"
Hi, `cat' is an overused tool :)
--
Best regards,
Michaël
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freeb
"Kelly Jones" <[EMAIL PROTECTED]> writes:
> Months ago, I got a new USB drive for my Mac OS X, did "newfs
> /dev/disk1" on it, and it's been working fine.
>
> I then foolishly did "disklabel -create /dev/disk1", which broke
> it. How can I recover my data? I've tried fsck w/ alternate
> superblock
Darren Pilgrim <[EMAIL PROTECTED]> writes:
> I'm unable to unmount an idle filesystem (or even drop it to
> read-only):
>
> # umount /usr/ports
> umount: unmount of /usr/ports failed: Device busy
Do you have HAL daemon running?
I recently had the same problem, and it turned out that momentaneous
Chuck Robey <[EMAIL PROTECTED]> writes:
> As long as folks don't stop me from running whatever I want, I don't
> care if you use bash, but it really irks me, that most Linux systems
> are broken in that respect: Most of them break badly in random ways,
> if you don't run bash as your shell.
A fri
Predrag Punosevac <[EMAIL PROTECTED]> writes:
>> If I do understand, this seems a close analogue of PPL files in the
>> printing world, right?
> You meant PPD files?
Yes that's what I meant!
>> In fact, I have no serious reason to run amd64 since I use my amd64
>> computer as a ``user workstatio
Predrag Punosevac <[EMAIL PROTECTED]> writes:
> Let me clarify firstly some things.
Thank you very much for this very detailed answer, it's very nice
from you!
[SNIP]
> In essence your scanner uses this file to explain the Sane the page
> layout and graphics. So it is not a driver!
If I do u
Predrag Punosevac <[EMAIL PROTECTED]> writes:
> I use Epson Perfection 1670 and it works like a charm. Unfortunately
> it does require binary blob which might be something you want to
> avoid.
What is that binary blob stuff? Do you mean by this a binary image
that should be loaded in kernel --- a
"Saravanan Shanmugham (sarvi)" <[EMAIL PROTECTED]> writes:
> I have tried GNU Make 3.80 as well as pmake. And I can't seem to find
> bmake for Linux.
Hye,
I have found in my vaults a script that downloads pmake source from
your favorite FreeBSD's mirror and builds a binary that worked on (at
lea
"Saravanan Shanmugham (sarvi)" <[EMAIL PROTECTED]> writes:
> I installed/bootstrapped NetBSD pkgsrc on the linux box. This comes with
> bmake(which I think standas for bsdmake).
I use NetBSD pkgsrc on MAC OS X, and Makefiles of mine are
rejected by NetBSD's bmake, whereas they are accepted by M
Boris Samorodov <[EMAIL PROTECTED]> writes:
> On Mon, 26 Nov 2007 22:14:30 -0800 Ted Mittelstaedt wrote:
>
>> Fundamentally, you have to be educated to understand it. FreeBSD
>> is first and formost, for the educated computer user.
>
> Ted, you may exchange famous Hitler's quotes with your highly
"Aryeh M. Friedman" <[EMAIL PROTECTED]> writes:
> I have several "sub" accounts (for specialized purposes not really a
> part of an other account) which I do my work basically I have:
>
> aryeh -- my personal account
> web -- maintain my web site
> dev -- development/testing of software
> dep -- s
Martin McCormick <[EMAIL PROTECTED]> writes:
> I am ashamed to admit that I have been writing shell
> scripts for about 15 years but this problem has me stumped. $0
> is the shell variable which contains the script name or at least
> what name is linked to the script. The string in $0 may or
VeeJay <[EMAIL PROTECTED]> writes:
> Hello Gurus….
>
>
>
> I am running a status script written in Perl (*status.pl*) and want to have
> it *Always Running*.
>
> How can I check through CRON that "status.pl" is running and if NO, then
> start the script execution again?
Why don't you use the foll
Roland Smith <[EMAIL PROTECTED]> writes:
>> The second question is about ports that install TeX related stuff
>> (such as macro packages, like NOWEB do). I guess you edited texmf.cnf
>> to let /usr/local/share/texmf-local appear in TEXMF trees. Am I right,
>> and was this enough to let things run
Stephen Allen <[EMAIL PROTECTED]> writes:
> It's been drawn to my attention not to use bash from the ports
> collection, because if one of it's dependencies (gettext or libiconv)
> fails or is updated significantly, it could break, and prevent
> login. The suggested solution was to use a base shel
Predrag Punosevac <[EMAIL PROTECTED]> writes:
> ...
> Michaël
I have unintentionally (and automatically) put your address in the `From'
field of my last message. I am sorry for the annoyance.
--
All the best,
Michaël
___
freebsd-questions@freebsd.org m
Hi all,
I recently got a SATA INIC162x controller PCI card, and I am trying to
know if it is usable in a FreeBSD box. (See Hardware Note below, if
relevant.)
After few minutes of internet search, I am quite pessimistic about
this. I would however be very interested to hear from list members who
44 matches
Mail list logo
