likely it's going to
be said if I don't anyway :-)
If it's because of stability, you *could* give NetBSD or OpenBSD a try
perhaps? I had even 4.x panic'ing and locking up on my machine, where
NetBSD 3 is totally stable. I *think* NetBSD 3 supports ICH7 at least.
--
Mark C
ECTED]"
I *think* GAG can do this, though I have never actually personally tried
it. If I ever use a boot loader though, GAG is my first choice. It's
incredibly simple to install and configure.
http://gag.sourceforge.net/
--
Mark Cullen <[EMAIL PROTECTED]>
BSc (Ho
;
I've always had good luck with 'mbmon'. I think you can find it in
ports, possibly under 'xmbmon' -- in which case I think you'll need to
specify the option to build the console version, not the X version.
--
Mark Cullen <[EMAIL PROTECTED]>
___
Tom Grove wrote:
Over the past few months I have noticed that our mail server is flat out
locking up. I monitor it via Nagios and about once every two months I
get emails saying it is down and when I go over to the console the
server is totally unresponsive. I've gone through logs every time
Hello :-)
I've come across a deal where by I can either buy two identical 20GB
drives, or a 20GB drive and a 40GB drive for the same price as the two
20GB's. I was intending to use the drives for a RAID 1 array and have
read that ideally the drives should be identical, but it is do-able with
Drew Tomlinson wrote:
Sorry to be such a pest today. I'm working on a sh script that uses a
for loop. To test, I've written the following:
for i in `/usr/bin/find /multimedia/Pictures -iname "*.jpg" -or -iname
"*.gif" -print`
do
echo -e "\n$i"
done
The first line 'find' retur
Drew Tomlinson wrote:
Sorry to be such a pest today. I'm working on a sh script that uses a
for loop. To test, I've written the following:
for i in `/usr/bin/find /multimedia/Pictures -iname "*.jpg" -or -iname
"*.gif" -print`
do
echo -e "\n$i"
done
The first line 'find' retur
Micah wrote:
Siriphan Brigder wrote:
This page from the handbook will hopefully help you:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-troub
le.html
Good luck!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Sudheer Gupta
Se
Charles Swiger wrote:
On Oct 6, 2005, at 5:44 PM, Brian E. Conklin wrote:
I am getting ready to switch a FreeBSD 4.11 machine from IPFW to
IPFILTER for better FTP and NAT support.
Hmm. Is there something natd doesn't handle for your case...?
I currently have IPFW compiled into the
Lowell Gilbert wrote:
Jakob Breivik Grimstveit <[EMAIL PROTECTED]> writes:
My entire system stops completely while unpacking large tar files, like when
building OpenOffice2.0-devel. Sound goes into a loop with a timeframe of
0.001 seconds, mouse pointer stops responding, everything goes to a h
Mike Jeays wrote:
On Tue, 2005-09-27 at 11:34, Kevin Kinsey wrote:
Kirk Strauser wrote:
On Monday 26 September 2005 22:54, Ted Mittelstaedt wrote:
Here you are, I'm sure this sort of thing is what you are really
dying to have on there;
You owe me a new keyboard, preferably a spewed
Good morning :-)
I've recently switched ISP and got a static IP. However, my ADSL modem
is a bit dense it seems. With a dynamic IP things worked reasonably
well. With my new static IP, however, whenever the connection drops - I
don't have the worlds highest quality phone line or something - e
Good morning :-)
I've recently switched ISP and got a static IP. However, my ADSL modem
is a bit dense it seems. With a dynamic IP things worked reasonably
well. With my new static IP, however, whenever the connection drops - I
don't have the worlds highest quality phone line or something - ei
Hi, I decided to install tightvnc and during the X stuff I got this error..
-
[...snip...]
rm -f xdpyinfo
cc -o xdpyinfo -O -pipe -march=pentium -ansi -Dasm=__asm -Wall
-Wpointer-arith -Wundef
-L/usr/ports/x11/XFree86-4-clients/work/xc/exports/lib xdpyinfo.o
-lXtst -lXi -lXrende
Chad Leigh -- Shire.Net LLC wrote:
On May 21, 2005, at 8:52 AM, Lowell Gilbert wrote:
"Chad Leigh -- Shire.Net LLC" <[EMAIL PROTECTED]> writes:
I was wondering if there was any way to tell the memory configuration
of a server running FBSD 5 (while running). By this I mean: can I
tell if
Lowell Gilbert wrote:
Mark Cullen <[EMAIL PROTECTED]> writes:
Lowell Gilbert wrote:
Mark Cullen <[EMAIL PROTECTED]> writes:
Right, I have this weird annoying issue with my modem which I have
finally got around to looking in to. Basically, it's all good and
works fine (obvio
Lowell Gilbert wrote:
Mark Cullen <[EMAIL PROTECTED]> writes:
Right, I have this weird annoying issue with my modem which I have
finally got around to looking in to. Basically, it's all good and
works fine (obviously, otherwise I wouldn't be here!), except when I
reboot the inter
Right, I have this weird annoying issue with my modem which I have
finally got around to looking in to. Basically, it's all good and works
fine (obviously, otherwise I wouldn't be here!), except when I reboot
the internet computer the IP will change, the connection DOESN'T drop,
but the IP does
Eugene M. Minkovskii wrote:
Hi!
I'm confusing now: about a month ago I have upgrated from FreeBSD
5.2.1 to stable 5.3. Since this moment strange things have been
happens on my PC. Usually system works Ok, and can be run as long
as I need without errors. But sometime, (after a little time
after the
Kevin D. Kinsey, DaleCo, S.P. wrote:
Chuck Swiger wrote:
Jerry Hoover wrote:
I would like to learn FreeBSD 4.8 (I think I have a copy)
What I need to know, what does it require?
CPU?
RAM?
Hard Drive Space?
A 486-grade CPU or later, 16MB of RAM, and 1 GB of disk space is
something resembling a
Nothing bad has happened.. yet. But the high memory usage column for
routetbl on vmstat -m looks like it got close to limits.
high limit
routetbl 29192 3953K 8681K 10210K 160873650 0 16,32,64,128,256
Suppose it did reach the limit, what would happen? Would it
Jerry McAllister wrote:
Jeff Lawlor wrote:
On Fri, 2004-12-10 at 09:07, Ruben de Groot wrote:
On Fri, Dec 10, 2004 at 08:49:50AM -0600, Jeff Lawlor typed:
For programs that require linux kernel source code what about copying
the linux kernel source files from a linux box on to the FreeBSD
machine
Jeff Lawlor wrote:
On Fri, 2004-12-10 at 09:07, Ruben de Groot wrote:
On Fri, Dec 10, 2004 at 08:49:50AM -0600, Jeff Lawlor typed:
For programs that require linux kernel source code what about copying
the linux kernel source files from a linux box on to the FreeBSD
machine? Has anyone tried this?
Just to tell you I got the newest version of lcdproc to compile (0.4.5).
I don't have an LCD ready yet, so I don't know if it works.. but it
compiles now.
Attached is a tar of the patches in the 'files' directory. It seems
there was no need for patch-port anymore, so I removed that and fixed
t
Just wondering if anyone knows if this has the same 'bad design' as the
8139 cards. I'm looking at an embedded board computer which can either
have 3xRealtek 8100B's or 3xIntel 82559's.
The Realtek version is £170 and the Intel version says to contact them
for a price, I think it's going to be
Gordon Freeman wrote:
Well, After upgrading a very vanilla 5.2.1 to 5.3 a lot of things are
just broken.
ipfstat doesn't run. The error:
openkmem:open:no such file or directory
My RAID card (Adaptec 2150 using asr driver) is inaccessible because
the rasr control device no longer exists. Making raid
Mark Cullen wrote:
Artem Kazakov wrote:
Mark Cullen wrote:
Ok, I am having a bit of trouble setting up a serial console login. The
cable is attached to com1, heres my /etc/ttys
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyd0 "/usr/libexec/getty std
Artem Kazakov wrote:
Mark Cullen wrote:
Ok, I am having a bit of trouble setting up a serial console login. The
cable is attached to com1, heres my /etc/ttys
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyd0 "/usr/libexec/getty std.115200" dialup
Ok, I am having a bit of trouble setting up a serial console login. The
cable is attached to com1, heres my /etc/ttys
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console noneunknown off secure
#
ttyv0
Mike Hauber wrote:
On Sunday 24 October 2004 12:04 pm, Mark Cullen proclaimed:
Hi there,
I was just wondering what the state of 4-STABLE is these
days? I have just installed 4.10-R on a machine and was
going to update it to STABLE.
What sort of changes have there been in STABLE since
4.10-R was
Hi there,
I was just wondering what the state of 4-STABLE is these days? I have
just installed 4.10-R on a machine and was going to update it to STABLE.
What sort of changes have there been in STABLE since 4.10-R was
released? UPDATING just stops at "4.10 released".
--
Internet Explorer? Try Fir
Nathan Kinkade wrote:
On Tue, Oct 19, 2004 at 10:18:18PM +0100, Mark Cullen wrote:
I have a rather old machine acting as a home server. According to dmesg
it has a:
--
atapci0: port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
--
However, both hard disks attached
I have a rather old machine acting as a home server. According to dmesg
it has a:
--
atapci0: port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
--
However, both hard disks attached are running in PIO mode.
--
ad0: 4103MB [8894/15/63] at ata0-master BIOSPIO
ad2: 6194
33 matches
Mail list logo
