Hello Adam,
On Mon, Oct 6, 2008 at 8:40 AM, Adam Zaleski <[EMAIL PROTECTED]> wrote:
> Ivan "Rambius" Ivanov pisze:
>
>> # /sbin/md5 -s newpassword
>> and then I passed the output to chpass. I tried to use the new
>> password for the next login but it failed - so I believe this is
>> wrong.
>> Can
On Mon, Oct 06, 2008 at 06:07:17AM +, dhaneshk k wrote:
> People ;
> I installed freebsd-7.0 in a p4 machine , after installation when I reboot
> the machine , I am getting the message
> acpi_tz0: _TMP value is absurd ignored (-269.7C) in every 3 seconds ..
> intel p4 3.0 GHz
> Intel 8291
Ivan "Rambius" Ivanov pisze:
# /sbin/md5 -s newpassword
and then I passed the output to chpass. I tried to use the new
password for the next login but it failed - so I believe this is
wrong.
Can you please show me how to generate the password hashes?
You can add new account with one command li
People ;
I installed freebsd-7.0 in a p4 machine , after installation when I reboot the
machine , I am getting the message
acpi_tz0: _TMP value is absurd ignored (-269.7C) in every 3 seconds ..
intel p4 3.0 GHz
Intel 82915G (915G GMCH )
How can i get rid off this ...
Ivan "Rambius" Ivanov pisze:
# /sbin/md5 -s newpassword
and then I passed the output to chpass. I tried to use the new
password for the next login but it failed - so I believe this is
wrong.
Can you please show me how to generate the password hashes?
You can add new account with one command li
Hello,
According to man pages of chpass(1) and vipw(1) I can create and
modify users by supplying a user database entry in passwd(5) format.
The only problem I face is that I do not know how to generate the
password hashes for the password field.
Following section 14.4
[http://www.freebsd.org/do
FreeBSD a écrit :
matt donovan a écrit :
On Sun, Oct 5, 2008 at 12:58 PM, FreeBSD <[EMAIL PROTECTED]>
wrote:
There is my situation:
I want to be able to use freebsd-update to update a FreeBSD 7.0-Release
installation to the latest security patches (I want an update and
not an
upgrade if I
[Mel, the last time I replied to your @rachie address, I got a bounce.
I'm still including it here on the CC list. Should I remove it and just
reply to you via this list? --rdh]
Diane, Mel, thanks for your suggestions so far.
Mel> If upgrading ports is a possible solution, then you have the
Hi Matthew
That did the trick, have accidentally been using an old pre-carp set of
firewall rules for the last few days. After your response, I went back and
updated to the new rule-set. It's always the simple things.
Thank you, your response was greatly appreciated.
Frank
> > I have CARP run
On Sun, Oct 05, 2008 at 12:53:03PM -0500, Scott Bennett wrote:
> I'm getting a lot of messages like this:
>
> Oct 4 14:30:00 hellas kernel: Limiting closed port RST response from 250 to
> 200 packets/sec
>
> Is there some rule I can insert into /etc/pf.conf to reject these apparently
> inv
matt donovan a écrit :
On Sun, Oct 5, 2008 at 12:58 PM, FreeBSD <[EMAIL PROTECTED]> wrote:
There is my situation:
I want to be able to use freebsd-update to update a FreeBSD 7.0-Release
installation to the latest security patches (I want an update and not an
upgrade if I understand correctly
Over the past four days I've managed to get my FreeBSD server running
KDE
up by installing kde4. Now, for some reason, konqueror fails to
conntect
anywhere.
How can I free up my old kde3 files and get konqueror working again?
gary
--
Gary Kline [E
On Sun, Oct 05, 2008 at 08:19:01PM +0200, Mel wrote:
> On Sunday 05 October 2008 18:07:30 Dale Hagglund wrote:
> > > "Mel" == Mel <[EMAIL PROTECTED]> writes:
>
...
>
> If upgrading ports is a possible solution, then you have the fine task of
> finding out, which library in everything that's be
On Sunday 05 October 2008 19:53:03 Scott Bennett wrote:
> I'm getting a lot of messages like this:
>
> Oct 4 14:30:00 hellas kernel: Limiting closed port RST response from 250
> to 200 packets/sec
>
> Is there some rule I can insert into /etc/pf.conf to reject these
> apparently invalid RST p
On Sun, Oct 05, 2008 at 12:53:03PM -0500, Scott Bennett wrote:
> I'm getting a lot of messages like this:
>
> Oct 4 14:30:00 hellas kernel: Limiting closed port RST response from 250 to
> 200 packets/sec
>
> Is there some rule I can insert into /etc/pf.conf to reject these apparently
> inv
On Sunday 05 October 2008 18:07:30 Dale Hagglund wrote:
> > "Mel" == Mel <[EMAIL PROTECTED]> writes:
> Mel> It's not a 'standard answer', btw, but an educated guess, since
> Mel> utmx is (simplified) the kernel equivalent of
> Mel> pthread_(rwlock|mutex)_* and looks like it's hang
On Sun, Oct 05, 2008 at 10:07:30AM -0600, Dale Hagglund wrote:
> > "Mel" == Mel <[EMAIL PROTECTED]> writes:
>
> Mel> Can you change scheduler to ULE and rebuild kernel?
> Mel> Or better yet, try 7.1-PRERELEASE, since it's good to know if
> Mel> this bug persists with 7.1 being clos
Hello,
I installed FreeBSD 7.0r in a Clevo tablet.
I works great, but i am missing the touchscreen.
Did someone make it work or got any idea where can i start to try?
I got the pciconf -lv and scanpci -v info:
Thanks in advance for any help you can give me.
pciconf:
[EMAIL PROTECTED]:0:0:0:cl
I'm getting a lot of messages like this:
Oct 4 14:30:00 hellas kernel: Limiting closed port RST response from 250 to
200 packets/sec
Is there some rule I can insert into /etc/pf.conf to reject these apparently
invalid RST packets before they can bother TCP? At the same time, I do not
want
On Sun, Oct 5, 2008 at 12:58 PM, FreeBSD <[EMAIL PROTECTED]> wrote:
>
> There is my situation:
> I want to be able to use freebsd-update to update a FreeBSD 7.0-Release
> installation to the latest security patches (I want an update and not an
> upgrade if I understand correctly). Where this gets
On Thursday 02 October 2008 17:11:52 DAve wrote:
> Good morning all,
>
> We have a cronjob we need to run as nobody from /etc/crontab and it
> seems to be not working. The job runs, but not as user nobody.
>
> I noticed two things,
>
> 1) the job to update the locate DB runs as nobody, because the
Hi everyone,
I'm totally new to freebsd-update. I used to recompile the kernel and
the world when I wanted to update. But I think it's now time to take
advantages of the binary update possibility. I looked at the man pages
and some googling couldn't answer my questions properly. I need to roll
On Thursday 02 October 2008 21:00:54 Matthew Seaman wrote:
> Andrei Brezan wrote:
> > Hello list,
> >
> > I wanna do a
> > mysqldump -u user -ppasswd --all-databases > backup.sql
> >
> > and all I get is
> > mysqldump: No match.
> >
> > This happens either i put --all-databases or I specify any of
On Thursday 02 October 2008 19:38:21 kalin m wrote:
> hi all...
>
> i have openssh 5. i want to jail the users to their home directories so
> they can go down but not up.
>
> i didn't see a directive that does that in the man or in the sshd_config.
On RELENG_7 (aka -stable, aka 7.1-PRERELEASE), is
> "Mel" == Mel <[EMAIL PROTECTED]> writes:
Mel> Can you change scheduler to ULE and rebuild kernel?
Mel> Or better yet, try 7.1-PRERELEASE, since it's good to know if
Mel> this bug persists with 7.1 being close to release.
I'll rebuild with ULE first, and let you and the list kn
Ludovit Koren пишет:
Hi,
I would like to buy HP servers DL 320 G5p or DL 360 G5p. I googled but
did not find clear answer if the NICs and disk controllers are
supported in FreeBSD 7.x. I read about some problems with NIC in DL
360 but it was not actual and I am not sure about disk controller
in
Hello
I post the questions several months a go but I find until now no solutions. If
I use portupgrade -fa I get the folowing error:
/usr/local/lib/ruby/site_ruby/1.8/pkgversion.rb:41:in `initialize': ,2: Not in
due form: '[_][,]'. (ArgumentError)
from /usr/local/sbin/portupgrade:638:in
We also have DL380's and I can't remember what generation my FreeBSD test
server is, but it too has the Broadcoms in it which work fine with FreeBSD 7.0.
Ours is recognized as bce however.
Gavin Spomer
Systems Programmer
Brooks Library
Central Washington University
>>> "H.fazaeli" <[EMAIL PRO
Hello all,
I resolved my earlier problem ("ipfw: getsockopt(IP_FW_ADD): Invalid
argument" when trying "ipfw add nat") by upgrading to 7.1-BETA which
includes ipfw_nat as a kernel module; however, it still doesn't seem
to work.
When I'm directly ping'ing another box, I can see packets arriving at
On Wednesday 01 October 2008 22:36:51 Peter Thoenen wrote:
> The Thinkpad series has always had strong FreeBSD support with the two
> digit models (Xnn) but I am a bit iffy on Lenovo's attempts to morph the
> Thinkpads into something else via the three digit series (Xnnn).
> Anybody own a X200s and
On Sunday 05 October 2008 02:12:44 Dale Hagglund wrote:
> I can reproduce this reliably with
>
> $ python -c "import wx"
>
> I'm running 7.0-RELEASE-p2 with "uname -a" giving the following output,
> suitably wrapped.
>
> FreeBSD ponoka.ab.hsia.telus.net
> 7.0-RELEASE-p2 Fre
On Sun, Oct 05, 2008 at 03:42:53AM -0700, Jeremy Chadwick wrote:
> On Sun, Oct 05, 2008 at 11:07:58AM +0200, Wojciech Puchar wrote:
> >>>
> >>>
> >>> I tried using fdisk first, same problem, won't let me write to the disk.
> >>
> >> Do you will use the entire disk in one partition ? If so, just do
On Sat, 4 Oct 2008, Redd Vinylene wrote:
> On Sat, Oct 4, 2008 at 9:22 PM, George Hartzell <[EMAIL PROTECTED]> wrote:
> > Redd Vinylene writes:
> > > On Sat, Oct 4, 2008 at 9:02 PM, George Hartzell <[EMAIL PROTECTED]>
> > wrote:
> > > >
> > > > If you do an ls -lo /home/jail/box/usr/bin/c
Yes, this worked perfectly. Thank y'all so much. May this post be of
help to others in the future as well.
--
http://www.home.no/reddvinylene
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To u
On Sunday 05 October 2008, WATANABE Kazuhiro wrote:
> I've used Canon MP810 with CUPS and "IJ Printer Driver" for Linux
> (supplied by Canon) on FreeBSD.
>
> Canon doesn't supply the printer driver for MP810, but I've been able
> to use the printer with the driver for MP610. These printer specs
>
On Sun, Oct 05, 2008 at 03:42:53AM -0700, Jeremy Chadwick wrote:
> On Sun, Oct 05, 2008 at 11:07:58AM +0200, Wojciech Puchar wrote:
> >>>
> >>>
> >>> I tried using fdisk first, same problem, won't let me write to the disk.
> >>
> >> Do you will use the entire disk in one partition ? If so, just do:
On Friday 03 October 2008, Roland Smith wrote:
> I can't spot anything suspicous in that. Maybe you should try a
> gutenprint mailing-list/forum.
I've tried a couple of gutenprint and CUPS lists but no responses yet
apart from a recommendation to use Linux Turboprint.
Out of curiosity I've trie
On Sun, Oct 05, 2008 at 11:07:58AM +0200, Wojciech Puchar wrote:
>>>
>>>
>>> I tried using fdisk first, same problem, won't let me write to the disk.
>>
>> Do you will use the entire disk in one partition ? If so, just do:
>> newfs /dev/ad4
>>
> yes you can. i actually do this
Isn't this what's ca
On Sun, Oct 05, 2008 at 01:26:37AM -0700, Carl wrote:
> On Thu Oct 2 06:59:47 UTC 2008 Jonathan McKeown wrote:
>> On a system running 6.2-RELEASE, with a 6.2-RELEASE Disc 1 in the CD
>> drive but not mounted:
>>
>> mkdir serialcd
>>
>> tar xvfC /dev/acd0 serialcd
>>
>> These two commands created a
HP servers usually have NICs with broadcom or intel chipsets which are
recognized
as bge and em under freebsd and work great.
We have the following configurations and they work fine:
- freebsd 6.3 on dl320G5 with on-board broadcom network chipset and SATA
HDDs. We had
problems with hardwar
Ian Smith wrote:
On Sat, 4 Oct 2008, Redd Vinylene wrote:
> On Sat, Oct 4, 2008 at 9:22 PM, George Hartzell <[EMAIL PROTECTED]> wrote:
> > Redd Vinylene writes:
> > > On Sat, Oct 4, 2008 at 9:02 PM, George Hartzell <[EMAIL PROTECTED]>
wrote:
> > > >
> > > > If you do an ls -lo /home/jai
[EMAIL PROTECTED] wrote:
I have CARP running on a master and a slave server and for some unknown reason
the slave continues to classify itself as a master, even though the advskew is
higher than on the master.
It appears that queries sent to the CARP ip address go to the master 50% of the
tim
Hi
I have CARP running on a master and a slave server and for some unknown reason
the slave continues to classify itself as a master, even though the advskew is
higher than on the master.
It appears that queries sent to the CARP ip address go to the master 50% of the
time and the slave 50% of
I tried using fdisk first, same problem, won't let me write to the disk.
Do you will use the entire disk in one partition ? If so, just do:
newfs /dev/ad4
yes you can. i actually do this
___
freebsd-questions@freebsd.org mailing list
http://lists.f
Use tar. Simple FreeBSD tar, it's good for everything.
--
Edwin Groothuis Website: http://www.mavetju.org/
[EMAIL PROTECTED] Weblog: http://www.mavetju.org/weblog/
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/ma
Today I mirrored my new harddisk with the instructions at
http://www.freebsddiary.org/gmirror.php
Right now I'm synchronized up to 65% :-)
Edwin
--
Edwin Groothuis Website: http://www.mavetju.org/
[EMAIL PROTECTED] Weblog: http://www.mavetju.org/weblog/
__
Hello,
At Wed, 1 Oct 2008 15:46:29 +0100,
Mike Clarke wrote:
> I've just installed a Canon Pixma iP4500 on a 6.3 system using CUPS and
> gutenprint. Black printing is fine but I've got problems with colours.
> The colour wheel on the CUPS test page comes out as a psychedelic
> collection of bri
Hi,
I would like to buy HP servers DL 320 G5p or DL 360 G5p. I googled but
did not find clear answer if the NICs and disk controllers are
supported in FreeBSD 7.x. I read about some problems with NIC in DL
360 but it was not actual and I am not sure about disk controller
in DL 320.
Any personal
On Thu Oct 2 06:59:47 UTC 2008 Jonathan McKeown wrote:
On a system running 6.2-RELEASE, with a 6.2-RELEASE Disc 1 in the CD drive but
not mounted:
mkdir serialcd
tar xvfC /dev/acd0 serialcd
These two commands created a directory tree in serialcd containing most of the
contents of the CD. The
--- On Sat, 10/4/08, Unga <[EMAIL PROTECTED]> wrote:
> I'm getting following compile error for
> /usr/src/sys/i386/i386/genassym.c :
> cc1: error: unrecognized command line option
> "-mno-align-long-strings"
> cc1: error: unrecognized command line option
> "-fformat-extensions"
> *** Error code 1
Jeremy Chadwick wrote:
On Fri, Oct 03, 2008 at 01:37:56AM -0700, Jeremy Chadwick wrote:
2) BIOS: Thermal monitoring
I should be more precise: I'm referring to things like fan speed
auto-slowdown or PWM. These boards often offer numerous methods of
throttling fans and other features.
I *did*
51 matches
Mail list logo
