On Sat, 3 Jan 2004 03:47, Eric F Crist wrote:
> On Thursday 01 January 2004 11:46 pm, Malcolm Kay wrote:
[snip]
[not Malcolm Kay]
> > > > $ df -h
> > > > FilesystemSize Used Avail Capacity Mounted on
> > > > /dev/ad0s3a 1008M92M 835M10%/
> > > > /dev/ad0s2 1020M19M 100
in message <[EMAIL PROTECTED]>,
wrote parv thusly...
>
> # Should work w/ the force
...
> pkg_add -f
I meant to write "should work withOUT the force [option]".
- Parv
--
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listi
vegeta# cd /usr/share/example/cvsup
vegeta# cvsup -g -L2 standard-supfile
vegeta# cd /usr/src/sys/i386/conf
vegeta# config VEGETA
vegeta# cd ../compile/VEGETA
vegeta# make depend
vegeta# make
[lots of output snipped]
linking kernel
if_em.o: In function `em_process_receive_interrupts':
if_em.o(.text
in message <[EMAIL PROTECTED]>,
wrote Mauricio thusly...
>
> daffy# pkg_add libiconv-1.9.1_3.tgz
> pkg_add: package 'libiconv-1.9.1_3' or its older version already
> installed
> daffy#
>
> Ok then, I force it to be installed (-f option). All I get in the end
> is *two* entries of libiconv accordi
On Friday 02 January 2004 08:32 pm, Trey Sizemore wrote:
> T Kellers wrote:
> >On Friday 02 January 2004 06:49 pm, Trey Sizemore wrote:
> >>Eric F Crist wrote:
> >>>On Friday 02 January 2004 02:06 pm, T Kellers wrote:
> Don't use both device pcm and the .ko modules. The sound won't work at
> >
Hello List,
I am having some difficulty in getting my xl0 and xl1 3com cards to work
the way I'd like. I'm running 5.1 Release and I'm basically trying to
have one interface with no IP address(specifying it as such in
/etc/rc.conf as ifconfig_xl1="up")
And I'd like to have the other(xl0) to have
On Jan 1, 2004, at 9:33 AM, Peter Ulrich Kruppa wrote:
I have got the same problem, only the other way round:
Last week I managed to get my standalone print server with samba
and cups working, but I can't exactly tell how I did it, so you
can help me there :-)
This is my smb.conf
Hey, thanks. I w
> For the kernel configuration you can even optimize the compilation for
> such processors (5.x only) :
>
> options CPU_ATHLON_SSE_HACK
> options CPU_ENABLE_SSE
These are also valid kernel options for 4.x.
___
[EMAIL PROTECTED] mailing list
http://list
My 2600+ overclocked doesn't complain on the 5.2 (worked also with
4.9) Don't worry I don't use it a production server ;)
For the kernel configuration you can even optimize the compilation for
such processors (5.x only) :
options CPU_ATHLON_SSE_HACK
options CPU_ENABLE_SSE
and also a special
David Bear asked on Wednesday Dec 31, 2003:
> the NIC selection at the local store was terrible. I ended up buying a
> netgear FA311. I cannot tell what chipset this has.. It is the
> numbers VS318AG in it..
>
> anyone used a netgear nic with fbsd 4.9?
>
I've got 3 of these in one box and 1 i
Here are the 4.9 hardware specs:
http://www.freebsd.org/releases/4.9R/hardware-i386.html
Here are the 5.1 specs:
http://www.freebsd.org/releases/5.1R/hardware-i386.html
--- Sal Aldana <[EMAIL PROTECTED]> wrote:
> I was wondering which AMD Processors are compatible
> with FreeBSD. I have a
> At
Lowell Gilbert wrote:
Trey Sizemore <[EMAIL PROTECTED]> writes:
I am running 5.2-CURRENT on my PII-400 desktop. I have done 3
installs of FreeBSD each time cvsupping to 5.2 current (using ISOs for
5.1 and 5.2) to do the initial install.
EVERY time I get the following problem. When I try to l
T Kellers wrote:
On Friday 02 January 2004 06:49 pm, Trey Sizemore wrote:
Eric F Crist wrote:
On Friday 02 January 2004 02:06 pm, T Kellers wrote:
Don't use both device pcm and the .ko modules. The sound won't work at
all or, if it does, not properly. You may not even have any key
I am running FreeBSD 4.3 on an old laptop.
Something (maybe Mozilla) stepped on something. Trying to run netscape-
communicator (with wrapper and remote) results in the following error:
$ /usr/local/bin/netscape
/usr/libexec/ld.so: warning: /usr/X11R6/lib/libXt.so.6: minor version -1
older than
On Friday 02 January 2004 03:53 pm, Sal Aldana wrote:
> I was wondering which AMD Processors are compatible with FreeBSD. I
> have a Athlon XP 2700 and wanted to know if it would work. I was
> also going to build a Dual Processor machine using Athlon MP
> Processors. If any of these work could you
"Aeden" <[EMAIL PROTECTED]> writes:
> How can i connect two windows machine togehter using freebsd and
> securing them with a vpn and even suply them with internet. i have a
> pentium 3 pc running freebsd 4.x and it has 5 pci ehternet cards one
> for internet two for the other machines can you ind
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception. Inev
How to get the best results from FreeBSD questions.
===
Last update $Date: 2003/03/09 22:09:31 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that at
Rob <[EMAIL PROTECTED]> writes:
> I'm following the instructions in the handbook for diskless boot.
> In Chapter 19.6.1.4 "Building a Diskless Kernel", it says:
>
> "Build the kernel (See Chapter 9), and copy it to the tftp directory ..."
>
> I have two problems here:
> 1. Chapter 9 only explain
At 06:52 PM 1/2/2004, Lowell Gilbert wrote:
"J.D. Bronson" <[EMAIL PROTECTED]> writes:
> I have noticed that when building apps (via gcc for example) that my
> free RAM (seen via 'top') is diminishing down to almost nothing...
"Free RAM is wasted RAM."
> Is it going to buffer space?
>
> it looks
Trey Sizemore <[EMAIL PROTECTED]> writes:
> I am running 5.2-CURRENT on my PII-400 desktop. I have done 3
> installs of FreeBSD each time cvsupping to 5.2 current (using ISOs for
> 5.1 and 5.2) to do the initial install.
>
> EVERY time I get the following problem. When I try to logout, reboot,
"J.D. Bronson" <[EMAIL PROTECTED]> writes:
> I have noticed that when building apps (via gcc for example) that my
> free RAM (seen via 'top') is diminishing down to almost nothing...
"Free RAM is wasted RAM."
> Is it going to buffer space?
>
> it looks like at this rate, I will start swapping s
Hi Martin,
> I agree: I experienced X11 freezes on 5.2 with both a nvidia card as
> well as a card using the i740 chipset. The nv freezed the computer as
> soon as I started X, the i740 happend to freeze it when I killed the X
> server
I also have nvidia - Geforce 256. And for me it also freezed
On Friday 02 January 2004 06:49 pm, Trey Sizemore wrote:
> Eric F Crist wrote:
> >On Friday 02 January 2004 02:06 pm, T Kellers wrote:
> >>Don't use both device pcm and the .ko modules. The sound won't work at
> >> all or, if it does, not properly. You may not even have any keyboard
> >> beeps (^
I have noticed that when building apps (via gcc for example) that my free
RAM (seen via 'top') is diminishing down to almost nothing...
Is it going to buffer space?
it looks like at this rate, I will start swapping soon...
Any comments or any way to change this behavior?
..I dont remember this
I was wondering which AMD Processors are compatible with FreeBSD. I have a
Athlon XP 2700 and wanted to know if it would work. I was also going to
build a Dual Processor machine using Athlon MP Processors. If any of these
work could you let me know before I decide to use FreeBSD. Thank you for
Eric F Crist wrote:
On Friday 02 January 2004 02:06 pm, T Kellers wrote:
Don't use both device pcm and the .ko modules. The sound won't work at all
or, if it does, not properly. You may not even have any keyboard beeps
(^G's) if both are loaded.
I find I only add the device pcm line to m
Will Prater <[EMAIL PROTECTED]> writes:
> List,
>
> sshd seems to be crashing my server. I am looking for any help
> regarding why this could be happening. I am running sshd version
> OpenSSH_3.6.1. Here is the output from dmesg:
>
> the machine crashed every time when running
>
> #ipfw show
>
Martin Brecher <[EMAIL PROTECTED]> writes:
> John Mills wrote:
> [...]
> > I have an installation I'm comfortable with, between those ports I
> > chose to install, those I chose _not_ to install, and those I went
> > around and added individually. Now I want to install the same set in
> > a number
--- Drew Tomlinson <[EMAIL PROTECTED]> wrote:
> - Original Message -
> From: "David Bear" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, December 30, 2003 8:36 PM
> Subject: netgear nic
>
>
> > the NIC selection at the local store was terrible.
> I ended up buying a
> >
On Fri, Jan 02, 2004 at 10:45:51AM -0800, Nate Lawson wrote:
> Not to mention it's impossible to find clock frequencies on amd.com.
Agreed, the easiest public way I've found is:
goto http://ask.amd.com/
select Desktop, Server, Workstation Processor Products
search "CPU specs"
John Mills wrote:
[...]
I have an installation I'm comfortable with, between those ports I chose
to install, those I chose _not_ to install, and those I went around and
added individually. Now I want to install the same set in a number of
other systems.
[...]
The machines have 3.5" diskettes, _
- Original Message -
From: "David Bear" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, December 30, 2003 8:36 PM
Subject: netgear nic
> the NIC selection at the local store was terrible. I ended up buying a
> netgear FA311. I cannot tell what chipset this has.. It is the
>
On Jan 2, 2004, at 9:26 AM, Eric Rescorla wrote:
I'm finally getting to the point where my disk capacity massively
outruns my tape capacity, so I'm thinking of converting to removable
disk-only backup. I could just use Amanda to backup to disk, but I'm
intrigued by Plan 9's archival filesystem whe
Freebies -
I have an installation I'm comfortable with, between those ports I chose
to install, those I chose _not_ to install, and those I went around and
added individually. Now I want to install the same set in a number of
other systems. I know I can get a list of installed options with
'pk
On Friday 02 January 2004 02:06 pm, T Kellers wrote:
> Don't use both device pcm and the .ko modules. The sound won't work at all
> or, if it does, not properly. You may not even have any keyboard beeps
> (^G's) if both are loaded.
I find I only add the device pcm line to my kernel and everythin
On Friday 02 January 2004 02:06 pm, Dru wrote:
> Is anyone aware of a tutorial/documentation available for creating a
> hardware profile? I'm thinking of something that allows the user to
> choose to either configure a wireless or a wired NIC during bootup. I
> could script it after bootup, but I'd
Jaroslaw Nozderko wrote:
[...]
Yes, see my post from earlier today called "Can't shutdown, logout,
or restart cleanly."
[...]
thanks, I've read it - I have Asus P3B-F motherboard :))
But seriously, I'm not sure it's hardware-related - I don't remember
a single occurence of this problem in 5.1 and 5
On Friday 02 January 2004 07:19 am, Francisco Reyes wrote:
> On Fri, 2 Jan 2004, Jason Bacon wrote:
> > Well, I'm in a position to provide some comparison data with not-too-many
> > variables,
>
> Thanks much for sharing the results.
>
> They seem close enough that someone who is price concious or
In the last episode (Jan 02), Toomas Aas said:
> However, when I umount /backup and remove the drive, the da0 device
> somehow remains active (can be seen with 'camcontrol devlist'). When
> I then plug in the second drive, it becomes da1, which spoils all my
> beautiful backup plans. I would prefer
Hello!
OS version: 4.9-RELEASE-p1.
'device firewire' and 'device sbp' compiled into kernel.
I've bought two external FireWire drives (Maxtor 5000DV) as a cheap
backup media. The idea is to use Amanda, define 5 "virtual tapes" on
each disk, and swap the disk at the end of every week, keeping one
On Fri, Jan 02, 2004 at 03:03:39PM -0500, Marius Kirschner wrote:
> > > Also, if I get a certificate for www.whatever.com will I be able to
> > > refer to it via http:// and https://?
> >
> > Well, ish. When you compile the port, you will be given the
> > option to generate several flavours of
Don't use both device pcm and the .ko modules. The sound won't work at all
or, if it does, not properly. You may not even have any keyboard beeps
(^G's) if both are loaded.
Get rid of the device pcm and just load the modules.
KDE comes with artsd as it's sound server; some people love it, som
Is anyone aware of a tutorial/documentation available for creating a
hardware profile? I'm thinking of something that allows the user to
choose to either configure a wireless or a wired NIC during bootup. I
could script it after bootup, but I'd prefer to do it during loader.
Will this require lea
> > Also, if I get a certificate for www.whatever.com will I be able to
> > refer to it via http:// and https://?
>
> Well, ish. When you compile the port, you will be given the
> option to generate several flavours of test key. These will
> permit the HTTPS server to work, but visitors will
I run KDE, Gnome, and occasionally IceWM (although I haven't yet
installed this on my FreeBSD machine). Coming from a linux background,
I'm a little confused about sound servers. I have a SoundBlaster Live
Value PCI card on my machine running 5.2-CURRENT.
I have compiled my kernel with 'devi
>
> Hi,
>
> This problem even appears when installing the OS though
> sysinstall. Disabeling acpi was the solution.
>
I just did a "buildworld" from 5.2-CURRENT and haven't had any problems. I
did install by putting 5.1-RELEASE on the 8100 via ftp and then cvsup'ing
sources. The only boot er
This question has been asked yesterday.
Try using "shutdown -p now" instead of -h and you system should turn his
power off automatically.
DAny
dc wrote:
>Hi,
>
>I have just build a freeBSD box with some parts I had lying around. I was
>wondering what I need to do to make the machine shutdown
I just got this failure on a
FreeBSD freepuppy.bellavista.cz 4.8-STABLE FreeBSD 4.8-STABLE #3: Tue Aug 26 12:34:53
CEST 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/FREEPUPPY2_5 i386
in a buildworld of freshly updated /usr/src.
UPDATING, marc.theaimsgroup.com, and google are quiet about the
Hi,
I have just build a freeBSD box with some parts I had lying around. I was
wondering what I need to do to make the machine shutdown completely. When I
run the shutdown -h now command the machine starts the process and than I
get the message that I need to press any key to reboot. I would like t
Hi,
With Nate Lawson's help, I have my FC/SCSI target mode operations working;
now I need to make things work on the initiator side.
A camcontrol rescan 1 causes the new target to become visible on the
initiator-side card. But the target is listed as
at scbus1 target 0 lun 0 (pass1)
At 01:08 PM 1/2/2004, T Kellers wrote:
For 4.x it's defined in /boot/defaults/loader.conf:
##
### Loader settings
##
#autoboot_delay="1
For 4.x it's defined in /boot/defaults/loader.conf:
##
### Loader settings
##
#autoboot_delay="10"# Delay in seconds befor
"J.D. Bronson" <[EMAIL PROTECTED]> writes:
> What do I have to do to lower (or remove) the typical
> 10 second delay:
>
> "Hit [Enter] to boot immediately, or any other key for command prompt."
>
> ..I need this machine to boot ASAP and cant see to find anywhere to
> adjust this?
I seem to reca
What do I have to do to lower (or remove) the typical
10 second delay:
"Hit [Enter] to boot immediately, or any other key for command prompt."
..I need this machine to boot ASAP and cant see to find anywhere to adjust
this?
thanks in advance!
--
J.D. Bronson
Aurora Health Care // Information
On Fri, Jan 02, 2004 at 01:09:17PM -0500, Marius Kirschner wrote:
> Thanks, Matthew, much appreciated. I assume I'll be able to use my current
> httpd.conf file, but just rename it to httpsd.conf?
No, it's still called httpd.conf. There's a whole passel of extra
configuration stuff to do with
On Fri, 2 Jan 2004, David O'Brien wrote:
> On Tue, Dec 30, 2003 at 12:06:06PM -0800, Nate Lawson wrote:
> > AMD, Cyrix. The amd64 arch is for the new 64 bit Opterons (i.e. FX64).
>
> What is "FX64"???
>
> "Opteron" is the server 64-bit CPU
> "Athlon64 FX51" is the high-end desktop CPU
> "Athlon64"
On Fri, 2 Jan 2004, Jason Bacon wrote:
> Well, I'm in a position to provide some comparison data with not-too-many
> variables,
Thanks much for sharing the results.
They seem close enough that someone who is price concious or on a limited
budget may want to consider the 3Ware.
However, what a
At 09:50 AM 1/2/2004, stan wrote:
I'm still not able to get failover working on ISC dhcpd, and it looks like
this list is out of answers.
The REAME in the work directory of the port mentions a couple of mailing
lists dedicated to that project (great anoth mailinglist to subscribe to
:-(), but it do
On Thu, 1 Jan 2004, Scott Mitchell wrote:
> There no particular reason for an ATA RAID to be slower than SCSI, assuming
> similar disks in each. 10krpm 'server class' ATA disks are available these
> days, although I don't know that anyone has done a 15krpm one yet.
That is the point. SCSI disks
Thanks, Matthew, much appreciated. I assume I'll be able to use my current
httpd.conf file, but just rename it to httpsd.conf?
Also, if I get a certificate for www.whatever.com will I be able to refer to
it via http:// and https://?
---Marius
> -Original Message-
> From: Matthew Sea
I'm still not able to get failover working on ISC dhcpd, and it looks like
this list is out of answers.
The REAME in the work directory of the port mentions a couple of mailing
lists dedicated to that project (great anoth mailinglist to subscribe to
:-(), but it does not explain how to subscribe t
Hello,
I'm trying to get some help installing the tarball in the subject line because I do
not have an internet connection at home, and every time I have tried to build a binary
from source
I've have been unable to because of some missing dependencies. I'm new to asking for
help but I would lik
I had this problem and traced it down to the fact that the default
location where clamav puts its socket is wrong. After editing
/usr/local/etc/clamav.conf so that LocalSocket looked like:
# Path to the local socket. The daemon doesn't change the mode of the
# created file (portability reasons). Y
Hi Trey,
>
> Yes, see my post from earlier today called "Can't shutdown, logout, or
> restart cleanly." I have not run 5.1-RELEASE before, so I can't say if
> it didn't happen there, but it definitely happens with 5.2-CURRENT. I'm
> at my wit's end trying to find out why!
thanks, I've read it -
orlandina wrote:
Hello freebsd-questions,
I have one problem with system. Always after rebooting it says that
file systems was uncorrectly unmounted and i have no way to recovery
system without reinstallation. Can you help with solving this
problem? May be problem is in compatibility with pro
Hello,
We are IzyData Software Developping company from Switzerland. And
now, we are going to dedicated server. For our OS we choose FreeBSD
4.9. And one problem appeared. We can't make working sata raid disks which are
on mirroring, we simply do not see it in a system.
Is this feature avail
On Fri, Jan 02, 2004 at 06:03:21AM -0800, Kris Kennaway wrote:
> On Fri, Jan 02, 2004 at 08:43:35AM +, Matthew Seaman wrote:
> > On Thu, Jan 01, 2004 at 08:57:06PM -0700, Shawn Dillon wrote:
> >
> > > I am trying to install SpamAssassin and I get the following error.
> > >
> > > /libexec/ld-e
I'm finally getting to the point where my disk capacity massively
outruns my tape capacity, so I'm thinking of converting to removable
disk-only backup. I could just use Amanda to backup to disk, but I'm
intrigued by Plan 9's archival filesystem where backups from (say Jan 1,
1999) would go in /199
On Thursday 01 January 2004 10:15 pm, Scott W wrote:
> >>Here's my df -h readout:
> >>
> >>$ df -h
> >>FilesystemSize Used Avail Capacity Mounted on
> >>/dev/ad0s3a 1008M92M 835M10%/
> >>/dev/ad0s2 1020M19M 1001M 2%/dos
> >>/dev/ad0s3g 4.8G69M 4.3G
On Fri, Jan 02, 2004 at 11:10:56AM -0500, Marius Kirschner wrote:
> I currently have Apache 1.3.29 running and want to switch to the Apache
> mod-ssl version. My question is, do I need to deinstall the standard apache
> before building the mod-ssl one from the ports? And what would be the best
> p
On Thursday 01 January 2004 11:46 pm, Malcolm Kay wrote:
> > > $ df -h
> > > FilesystemSize Used Avail Capacity Mounted on
> > > /dev/ad0s3a 1008M92M 835M10%/
> > > /dev/ad0s2 1020M19M 1001M 2%/dos
> > > /dev/ad0s3g 4.8G69M 4.3G 2%/home
> > > /d
On Fri, 2 Jan 2004, orlandina wrote:
> Hello freebsd-questions,
>
> I have one problem with system. Always after rebooting it says that
> file systems was uncorrectly unmounted and i have no way to recovery
> system without reinstallation. Can you help with solving this
> problem? May be p
On Thursday 01 January 2004 07:09 am, Francisco Reyes wrote:
> On Thu, 1 Jan 2004, Scott Mitchell wrote:
> > As for RAID, we use Vinum, but only because I inherited a bunch of
> > machines with hot-swap SCSI bays and no hardware RAID. It works well,
> > once you have it set up, and I've even manag
In the last episode (Jan 02), Vahric MUHTARYAN said:
> I'm using FreeBSD 4.9 with UFS file system support . I gave to
> question . I saw that single file can only grow 2 GB How Can I grow
> it? Does it tunable from Kernel or File System ?
FreeBSD 4 does not have a 2gb filesize limit. I have cre
In the last episode (Jan 02), Daryl Chance said:
> I'm adminning some remote servers and I need to get the drive model
> numbers so the owner can buy more disks. I've tried dmesg, but the
> only thing that gives me is the raid volume and the raid adapter
> model. I can go to the server with ATA R
Hi Everybody,
I'm using FreeBSD 4.9 with UFS file system support . I gave to
question . I saw that single file can only grow 2 GB How Can I grow it?
Does it tunable from Kernel or File System ?
Secound question is How can I change files system for example turn
FreeBSD 4.9 UFS
Hello freebsd-questions,
I have one problem with system. Always after rebooting it says that
file systems was uncorrectly unmounted and i have no way to recovery
system without reinstallation. Can you help with solving this
problem? May be problem is in compatibility with processor (Athlon
I'm adminning some remote servers and I need to get
the drive model numbers so the owner can buy more
disks. I've tried dmesg, but the only thing that
gives me is the raid volume and the raid adapter
model. I can go to the server with ATA Raid and it
gives me all the drives and their model number
On Wednesday 31 December 2003 02:04 pm, Francisco wrote:
> On Wed, 31 Dec 2003, Jason Bacon wrote:
> > 3ware IDE RAID.
>
> Agree on the 3ware controllers.
>
> > No such thing as cheap tape backups. :-(
>
> If the amount of data can compress into a CD or DVD you could consider a
> burner.
>
> Moreo
I had another ACPI related problem on my asus (nvidia) a7n8x,
and posted to the 'current' mailing list. One of the replies
suggested how to disable acpi cleanly:
At 09:17 +0200 01/01/2004, Danny Braniss wrote:
>try adding in file /boot/device.hints:
>hint.acpi.0.disabled="1"
>
>danny
That worked
Hello,
I am trying to have sendmail used clamd in order to filter incoming mail for
viruses on my mail server.
I have configured clamav following the instruction found here :
http://linux-sxs.org/administration/clamav-milter.html
I have modified my settings in order to have sendmail parsed the
I currently have Apache 1.3.29 running and want to switch to the Apache
mod-ssl version. My question is, do I need to deinstall the standard apache
before building the mod-ssl one from the ports? And what would be the best
procedure to minimize the downtime? Thank you,
---Marius
__
Not knowing which compaq server you are referring to, perhaps this link will
help.
http://www.daemonnews.org/23/cpqraid.html
I used these instructions and had FBSD4.8 happily running on Compaq5000R
w/ 4x200MHz CPU, 1.2GB of RAM, the Compaq 2P raid controller. However,
even though it has a scs
On 01 Jan 2004 20:13:39 -0500
Lowell Gilbert <[EMAIL PROTECTED]> wrote:
> It's an artifact of the way the data structures get initialized at the
> daemon startup. I don't see any problem with it...
There's no problem. It's just I like normal things :) usually when you
count your fingers you do n
Trey Sizemore wrote:
Jaroslaw Nozderko wrote:
OS: FreeBSD 5.2-RC2 (MAC - biba,mls)
Hi,
I have problem with X on 5.2-RC2. Sometimes the whole
system hangs when I start X by startx or 'setpmac mls/equal startx'
(with MAC policies loaded). In about 30% of attempts it hangs on
XFree startup messag
From: "Poul-Henning Kamp" <[EMAIL PROTECTED]>
> In message <[EMAIL PROTECTED]>, "Willem Jan Withagen"
writes:
> >
> >I'm running this compiler which is rather heap intensive and it crashed
with
> >a SigFault
> >in calloc/malloc (I've tied both, but as expected calloc calls malloc)
> >What suggestio
Tried upgrading my php to the latest but 'make' fails with the following
error:
/usr/ports/lang/php4/work/php-4.3.4/ext/gd/libgd/gdft.c:1060: structure has
no member named `advance'
/usr/ports/lang/php4/work/php-4.3.4/ext/gd/libgd/gdft.c:1061: structure has
no member named `advance'
*** Error code
Freebies -
I just finished a fairly lightweight ftp installation of 5.1-Release and
want to offer an X11 login screen. Basic XF86 seems to work fine. I
followed the 'Configuring xdm' instructions in Greg Lehey's
_Complete_FreeBSD_, ch.17, but didn't get quite all the way home.
I get the X11 login
Hi freinds,
Wish you all a very Happy New year.
I am get some kind of error on my name server "nameserv1". FYI, TM25 system is laptop
of out side client and OS is Windows XP Home.
nameserv1.lan.mycompany.com kernel log messages:
> 31 10:47:32 nameserv1 dhcpd: if IN A TM25.dhcp.mycompany.com do
Malcolm Kay wrote:
On Fri, 2 Jan 2004 13:29, Trey Sizemore wrote:
I edited my /etc/ttys file in Easy Editor and then saved and exited (or
so I thought) to enable kdm. When I rebooted, my machine would hang. I
went back into /etc/ttys and noticed that the file is now empty!!
What is the best w
Jaroslaw Nozderko wrote:
OS: FreeBSD 5.2-RC2 (MAC - biba,mls)
Hi,
I have problem with X on 5.2-RC2. Sometimes the whole
system hangs when I start X by startx or 'setpmac mls/equal startx'
(with MAC policies loaded). In about 30% of attempts it hangs on
XFree startup messages and hard reset is r
On Fri, Jan 02, 2004 at 08:43:35AM +, Matthew Seaman wrote:
> On Thu, Jan 01, 2004 at 08:57:06PM -0700, Shawn Dillon wrote:
>
> > I am trying to install SpamAssassin and I get the following error.
> >
> > /libexec/ld-elf.so.1: Shared object "libutil.so.4" not found
>
> You seem to be install
5.1
I have a server with 5 public IP addresses, so I'm thinking I'll set it up with one IP
for the server (as a host) and the other 4 assigned to 4 jails. The jails are for
websites...
>From a security standpoint, wouldn't it be better to run four instances of ftpd (one
>in each jail), as oppo
On Fri, Jan 02, 2004 at 01:16:38PM +, niraj kumar wrote:
> i want to create shared objects (.so files) in freebsd what is
> the command and the parameters for that.
I think it's:
$ gcc -shared -o libname.so (object files)
Gautam
___
[EMAIL PROTECTE
On Fri, Jan 02, 2004 at 02:13:01PM +0100, Maarten wrote:
> I'd like to run Busybox (http://www.busybox.net/) or something similar on FreeBSD.
> Has anyone on this list succesfully managed to do so yet, or do you know about
> alternatives?
Take a look at the contents of the /stand directory. No
Maarten <[EMAIL PROTECTED]> writes:
> I'd like to run Busybox (http://www.busybox.net/) or something similar on FreeBSD.
> Has anyone on this list succesfully managed to do so yet, or do you know about
> alternatives?
Sounds like crunchgen(1).
--
Lowell Gilbert, embedded/networking software e
i want to create shared objects (.so files) in freebsd what is the command and the
parameters for that.
niraj
Yahoo! India Matrimony: Find your partner online.Post your profile.
___
[EMAIL PROTECTED] m
Hi,
I'd like to run Busybox (http://www.busybox.net/) or something similar on FreeBSD. Has
anyone on this list succesfully managed to do so yet, or do you know about
alternatives?
Ta,
--
http://unsavoury.net/
___
[EMAIL PROTECTED] mailing list
http:
Hi,
I have a prolinea compaq system, one with no real bios. And yes, I cant get the floppy
install method to see the IDE drive. Very annoying.
JP
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscr
1 - 100 of 114 matches
Mail list logo
