5.1r Bridge with one ip - no access from non-ip side

Hi I've set up a bridge between the lan in my flat an my isp's adsl modem/nat router to shape traffic and also provide some services to both the lan and 'wan' side. current setup: router --- (xl0) bridge (fxp0) --- switch w/ clients 10.0.0.1no-ip dhcp dhcp (10.0.0.2, 10.0.0.20-1

defect onboard broadcom causing boot hang

I've just changed to using freebsd on my desktop pc, my Asus A7V8X motherboad has a onboard Broadcom chip - this just stopped working under windows and turned into a unknown device. Asus or vendor's support never replied so I just picked up a new fxp card. However under FreeBSD it hangs for a while

Re: defect onboard broadcom causing boot hang

but I dont want to mess my new and shiny setup :) Bjorn Eikeland wrote: I've just changed to using freebsd on my desktop pc, my Asus A7V8X motherboad has a onboard Broadcom chip - this just stopped working under windows and turned into a unknown device. Asus or vendor's support never repl

Re: defect onboard broadcom causing boot hang

the phy :) So I think I'll ask the hardware list how to avoid probing the thing at all. Thanks for trying though!! (I've sure learned a bit from it!) Bjorn Eikeland wrote: Thanks for your reply Jon! I've checked the driver cd and it had the drivers under Drivers\LAN\4401\ an

dummynet = local taffic > 100ms - help!

I think I've made a mess of my attempt to shape my traffic, the traffic on my lan ip is getting delayed. (About 18ms idle and 100ms full load, load is the same as for internet traffic) Traffic to localhost and other lan hosts are not delayed, the delay only occurs from my box to my ip. I started wi

Re: dummynet = local taffic > 100ms - help!

På Tue, 10 Feb 2004 07:08:09 -0500, skrev Chuck Swiger <[EMAIL PROTECTED]>: Bjorn Eikeland wrote: [ ... ] DUMMYNET and HZ=1 is in the kernel. Any suggestions what can be causing this? (I've only got the one nic, and use a adsl router for internett) I seem to recall some issues w

vlan with its own ether / mac address?

is it possible to set up a vlan device with its own ether address? I've tried the following: ifconfig vlan0 create ifconfig vlan0 vlan 1 vlandev fxp0 up ifconfig vlan0 inet 10.0.0.10 netmask 255.255.255.0 \ ether 00:a0:c9:f1:4e:6e ifconfig: ether: bad value but changing the ether value afte

Re: wireless D-link DWL-G650 A1

Fabrizio Parrella (by way of Fabrizio Parrella<[EMAIL PROTECTED]>) <> scribbled on 16. februar 2004 15:40: HI! I have the wireless card D-Link DWL-G650 A1 wireless and I need the info to make it works with FreeBSD5.2.. any suggestions? All I needed for my D-Link DWL-AG650 to work was this: de

DWL-G520 (A3)

Couldnt find this card mentioned on the list, so I'm just letting you know that this card works with 5.2. Card details: D-Link DWL-G520 (802.11 b/g) h/w ver. A3 f/w ver. 2.36 pciconf: [EMAIL PROTECTED]:11:0: class=0x02 card=0x32031186 chip=0x0013168c rev=0x01 hdr=0x00 ve