The wifi improvements are going into -HEAD. _I_ have no plans to
backport them to -9 as there's just too much changing/improving.
So I hate to say it, but I think you're going to be short of luck.
FreeBSD-10 needs testing sooner rather than later, so I do really
suggest you just bite the bullet an
On Wed, Jul 17, 2013, at 11:05, sbre...@hotmail.com wrote:
> To make the smallest upgrade possible and minimize potential reconfig
> issues etc. 8.1 was the first release supporting WG111v3.
>
> Could give a try with 8.4 if there was any major fix to WPA and WLAN
> drivers since 8.1? With minor ve
., correct?
Still the other quesion: What is the WLAN (PCI/PCIe) card most people use
HAPPILY in FreeBSD? Support for 802.11n would not be bad.
Cheers
Balazs
> From: f...@freebsd.org
> To: freebsd-net@freebsd.org
> Subject: Re: WG111v3 + 'urtw
On Wed, Jul 17, 2013, at 10:36, sbre...@hotmail.com wrote:
> Hello
>
> Just recently upgraded to 8.1 and installed the 'urtw' driver for my
> Netgear WG111v3 USB WLAN card.
Is there a reason why you specifically upgraded to 8.1 instead of
choosing 8.3 or 8.4? FreeBSD 8.1 has been EoL since July
connection moves from 'status: associated' to 'status: no
carrier' and stays stuck there.
Is there any way to prevent this? (WLAN signal is OK, put the box next to the
AP to test.)
Or, can you recommend a PCI/PCIe card that is proven to work reliably?
Regards
Balazs
---
Hi Folks,
I have a dell R900 - it came with a quad card Broadcom NetXtreme II
BCM5708 and I installed the 8.1 release amd64.
The bce connected to a switch foundry says 'no carrier', another bce
connected to a
router (juniper) works fine. I found some old threads about the bce driver.
http://ww
I'm trying to get this Netgear 662T Gigabit card to work in my file server.
As soon as the interface is flagged "UP" with "ifconfig nge0 up" or
"ifconfig nge0 inet x.x.x.x netmask x.x.x.x", the carrier is lost and the
media type (set to auto) changes from "1000baseTX " to
"". Manually forcing the
On Mon, 30 Apr 2001, Marcel Lemmen wrote:
> Try setting the media to autoselect:
> ifconfig fxp1 netmask media auto
Yes it is working. Thanks a lot.
Regards,
Christophe.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-net" in the body of the message
Jean-Christophe Varaillon wrote:
> Date: Mon, 30 Apr 2001 10:28:47 +0100 (BST)
> From: Jean-Christophe Varaillon <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Status: no carrier
>
> Hi all,
>
>
> I installed a Network Internet Card on a FreeBSD machine.
&
Hi all,
I installed a Network Internet Card on a FreeBSD machine.
>From the ifconfig command, I have got "status: no carrier".
--
fxp1: flags=8843 mtu 1500
inet 194.207.253.2 netmask 0xfff8 broadcast 194.207.253.7
inet6 fe80::202:b3ff:fe13:e596%fxp1
10 matches
Mail list logo
