,0
(cd0:ahc0:0:6:0): Medium not present
cd0 at ahc0 bus 0 target 6 lun 0
cd0: Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
--
Sun Microsystems Oy PL 102, Niittymäentie 9, 02201 Espoo,
ed it
completely and now mouse works without problems. It's quite strange
this switch will broke mouse if I don't use it and switch just sits
between these wires. It also works with other operating systems.
Tomppa
--
Sun Microsystems Oy PL 102, Niittymäentie 9, 02201 Espoo, Finl
device ID 0-51, 3 buttons
psm0: config:0100, flags:, packet size:3
psm0: syncmask:00, syncbits:00
sc0: fb0 kbd0
--
Sun Microsystems Oy PL 102, Niittymäentie 9, 02201 Espoo, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: [EMAIL PROTECTED]+358
ters mouse won't work either. Probably
this switch is just badly designed so it will drain all needed voltage
from wire.
Tomppa
--
Sun Microsystems Oy PL 102, Niittymäentie 9, 02201 Espoo, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: [EMAIL PROTECTED]
00 -> 1a000
pcm: setmap 1c000, 2000; 0xc5cfc000 -> 1c000
Tomppa
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: [EMAIL PROTECTED]+358 9 52556252 fax
To Unsubscribe: send mail to [
02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: [EMAIL PROTECTED]+358 9 52556252 fax
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
et 15), Tagged Queueing Enabled
da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: [EMAIL PROTECTED]+358 9 52556252 fax
To Unsubscribe:
_scan_lun: can't
allocate path, can't continue
Apr 29 01:34:13 cat last message repeated 43 times
Apr 29 01:36:02 cat last message repeated 322 times
Tomppa
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556
Invalidating pack
Apr 29 14:44:31 cat /boot/kernel/kernel: (da1:ahc0:0:2:0): Invalidating pack
Apr 29 16:34:04 cat /boot/kernel/kernel: (noperiph:ahc0:0:2:0): xpt_scan_lun: can't
allocate path, can't continue
Tomppa
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ES
Apr 25 22:23:04 phb /boot/kernel/kernel: ltmdm0: unable to activate interrupt in fast
mode - using normal modeltmdm0: type Virtual 16550A
Tomppa
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
e
n up and running 21 hours since world rebuild and
reboot. During this time I have stopped and started disk multiple
times and these errors are history now.
Tomppa
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556
.
>
I tried your package with Toshiba Portege 3440CT and 5.0C cvsupped
last weekend. Still the same problems, no connect though it dials and
ATI3 gives hard hang.
Tomppa
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358
ge over 10 ms: 3 x 100mA, ext = 0x46
Power down supply current: 2 x 1mA
Tuple #12, code = 0x14 (No link), length = 0
Tuple #13, code = 0xff (Terminator), length = 0
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer)
SB128 sound support has been broken over a week now. I don't who has
made changes on 26th Oct but after these changes I can't get any sound
out of my machine. Sources cvsupped 25th Oct still worked fine.
Tomppa
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Fi
eplaced. The same rules also
apply to non disk SCSI devices connected to any of the DAC960P Series
SCSI channels.
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: [EMAIL PROTECTED]+358 9
-
mode = 0100644, inum = 720391, fs = /uu
panic: ffs_valloc: dup alloc
syncing disks... 82 40 16 2 2 1 1 1
done
Uptime: 29m30s
mlx0: flushing cache...done
mlxd0: detached
mlxd1: detached
mlxd2: detached
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio
motherboards are used with standard settings and older Intel PPro
system don't support overclocking or other kludge stuff.
Tomppa
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: [EMAIL PROTE
datapath from the
> disks through the driver. I'm not aware of any bugs in the driver that
> could cause this. 8(
>
I think old PPro system even supported ECC memory. We are getting out
ideas. Maybe small 3 disk raid5 with little newer disks than we use
now.
Tomppa
--
Tomi Vainio - Sun Finland - writes:
>
> We got old Mylex DAC960PD-Ultra-raid-adapter and have tried to use it
> with FreeBSD 4.2-stable and 5.0-current. Adapter is configured with
> three luns 5+5*9G, 8+8*9G (raid5) and 1+1*2G (mirrored boot disk).
> All 9G disks are qu
driver to current
so it get updated?
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: [EMAIL PROTECTED]+358 9 52556252 fax
To Unsubscribe: send mail to [EMAIL PROTECTED]
with
don't know if it works with
> any changes made. Rather than send the patch to the list, I'll e-mail it to
> anyone that asks.
>
Your modification worked just fine and my laptop is back in business.
Tomppa
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Something has changed during last week because my Fxtv stopped working
in DGA mode. I'm back running old kernel so any clues what might
cause this?
Tomppa
FreeBSD 5.1-CURRENT #3: Sun Aug 10 00:57:18 EEST 2003
FreeBSD 5.1-CURRENT #4: Sat Aug 16 21:17:19 EEST 2003
***clip clip***
Copyright (c)
I've used my Cisco WLAN with Toshiba Portege 3440 couple years but now
it's broken. I just upgraded to new Toshiba Tecra M1 and reinstalled
FreeBSD there and now I get "an0: record length mismatch -- expected
430, got 440 for Rid ff68" errors. I already tried with old laptop
with latest kernel an
Peter Radcliffe writes:
>
> Have you got recent firmware on the cisco card ? The newer windows
> driver will "helpfully" upgrade it for you silently. If it has
> upgraded, downgrade it. The freebsd driver doesn't yet work with the
> new firmware.
>
> Cisco have changed the operation of the
Peter Radcliffe writes:
> Tomi Vainio - Sun Finland <[EMAIL PROTECTED]> probably said:
> > Peter Radcliffe writes:
> > > Cisco have changed the operation of the card with newer firmware and
> > > havn't released docs on working with the newer firm
Doug Ambrisko writes:
>
> I assume you are using a pccard version.
>
> It only a problem newer firmware. It works ... just noisy!
>
> You can try this patch to -current that should make it quiet.
> There is a bug with -current and setting the TX speed that I need
> to work on. Looks li
Martin Blapp writes:
>
> How old is your CURRENT installation ? Can you run dhclient in verbose
> mode and in foreground (-d -v) and maybe compile if with -DDEBUG ?
>
I've supped current on last Saturday.
Here are debug logs and how Cisco sees the situation. Windows XP
debug from Cisco is qu
Martin Blapp writes:
>
> Why don't you get an IP here ? Does the server see your requests ?
> If not, the an0 driver is broken for your card.
>
> IMHO it's not dhclient fault here.
>
> Martin
Did you look Cisco's dump where Windows DHCPDISCOVER appears as
0100.4096.3856.e7 but FreeBSD is
Martin Blapp writes:
>
> Hi,
>
> > DHCPREQUEST on em0 to 255.255.255.255 port 67
> > DHCPACK from 212.226.167.254
> > bound to 212.226.167.247 -- renewal in 228123 seconds.
>
> So the first time it works ? You get an IP here ...
>
> > an0: Found Link on interface
> > DHCPDISCOVER on
Martin Blapp writes:
>
> Hi,
>
> > Now I tested this at work with ISC DHCPD V3.0.1rc9 and it works just
> > fine.
>
> with the freebsd dhclient, or a unmodified V3.0.1rc9 one ?
>
> > For some reason Cisco dhcp server doesn't like FreeBSD anymore
> > if connect comes from an0 driver :-
Our system died when using iozone -a to ~300G vinum partition made
from four disks. Sources were cvsupped 7.9.2003.
Tomppa
kmem_malloc(8192): kmem_map too small: 28229632 total allocated
db> trace
Debugger(c03cc728,c0429ce0,c03db0bd,ca6c4800,100) at Debugger+0x54
panic(c03db0bd,1000,1aec000,
Tomi Vainio - Sun Finland writes:
> Our system died when using iozone -a to ~300G vinum partition made
> from four disks. Sources were cvsupped 7.9.2003.
>
Second panic an hour later. Any good ideas how to fix this?
Tomppa
panic: kmem_malloc(4096): kmem_map too small: 28229
Doug White writes:
> On Tue, 9 Sep 2003, Tomi Vainio - Sun Finland wrote:
>
> > Tomi Vainio - Sun Finland writes:
> > > Our system died when using iozone -a to ~300G vinum partition made
> > > from four disks. Sources were cvsupped 7.9.2003.
> > >
Dag-Erling Smørgrav writes:
> Tomi Vainio - Sun Finland <[EMAIL PROTECTED]> writes:
> > First maxusers was 0 then when changed it to 8.
>
> That's a regression. Keep it at 0.
>
I understood that there is a bug on new kmem allocator and this was an
attempt to r
Dag-Erling Smørgrav writes:
>
> The backtrace you showed seems to indicate that the panic happened
> somewhere in the softupdates code, but IIRC that code has a fairly
> conservative built-in limit on memory consumption and degrades
> gracefully when it hits that limit. It's likely that some
Dag-Erling Smørgrav writes:
>
> It would be really useful to know where the fault lies. We might even
> (God forbid!) figure out a way to fix it. You can easily force the
> system to boot with less than the full amount of memory by setting
> hw.physmem to e.g. "64m" in /boot/loader.conf or
Once again our current platform is unstable. Two weeks ago we had
problems with kmem allocator and this was "fixed" by adding more
memory and Dag-Erling Smørgrav still investigating those panics. Now
we got different looking panic and there is core available if someone
wants to take a peek on it.
After adding more disks to this system it dies continously. Last two
traces look quite the same.
Tomppa
---clipclip---
login: kernel trap 19 with interrupts disabled
NMI ... going to debugger
kernel: type 19 trap, code=0
Stopped at rtcintr+0x57: callrtcin
db> trace
rtcintr(0) at rtc
Dag-Erling Smørgrav writes:
>
> An NMI almost certainly indicates a hardware failure.
>
Lucas James writes:
>
> It could be a power supply on the way out. I had an old dual P-166 that
> rebooted misterously until I took out two CD-ROM drives I wanted
> for another
> machine. (replace
Once again our vinum build failed. This time it could do over 90% of
14 hours of work and we didn't got a panic just a "hang". Only we
could do while system was printing ata error messages was to press
reset button. Difference to earlier situation is that we put back old
3c905 xl-card and remove
Hi,
I'd like to give a try for this new code solving lost interrupts but
current code still doesn't find all my slave disks. Is there anything
what might help on this?
Tomppa
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinf
Hi,
Current ATA code is still unusable unstable. We cvsupped latest
source yesterday and tried our standard stress test copy between two
vinum volumes. Once we even got 12 hour uptime but today it won't
take longer than couple minutes before system freezes. Situation is
even worse if we replace
Hi,
Once again we cvsupped latest ATA code changes and nothing much
changed. Only after couple minutes of stress testing system will
freeze. Though error message is little different than before.
Tomppa
ad5: TIMEOUT - READ_DMA retrying (2 retries left)
ata2: resetting devices ..
ata2: reset t
My old MSI-6120 SMP system has been unusable quite a while with ACPI.
I've got these so far:
- Couldn't get vector from ISR
- vmstat -i shows high interrupt rates and system is very slow
- kernel trap 12 panic
Latest problem is something like this:
pfs_vncache_unload(): 2 entries remaining
curr
Tomi Vainio writes:
> My old MSI-6120 SMP system has been unusable quite a while with ACPI.
> I've got these so far:
> - Couldn't get vector from ISR
> - vmstat -i shows high interrupt rates and system is very slow
> - kernel trap 12 panic
>
> Latest
John Baldwin writes:
>
> Ok, your BIOS is buggy, but I think I can work around it.
> http://www.FreeBSD.org/~jhb/patches/acpi_irq.patch
>
Thanks, now it's working much better!
New dmesg and vmstat-i at http://tomppa.iki.fi/~tomppa/FreeBSD/
Tomppa
__
Hi,
I have had this same problem couple months already. Last time I asked
about this I didn't get any answers. I'am running latest current
cvsupped during the weekend and XFree86-4.2.0 is also compiled couple
hours ago. xdm and startx are otherwise just fine but I can't write
anything. Everyt
ng I/O window 0, start 0x300, size 0x20 flags
0x5
Jun 30 16:30:06 phb pccardd[131]: Assign ed-1, io 0x300-0x31f, mem 0x0, 0 bytes, irq
11, flags 8
Jun 30 16:30:06 phb pccardd[131]: ed0: Linksys (/Ether[Ff]ast 10/100 PC Card
\(PCMPC100.*\)/) inserted.
--
SUN Microsystems Oy PL 112,
Glenn Gombert writes:
> I get the following error when trying to rebuild the last couple of
> days...
>
> ../sys/kern/syscalls.master
> syscall.master : line 55: syscall number out of sync at 7 ...
>
> line is: struct rusage * rsuage ) ; } wait4 wait_args int
>
I've seen this and if I
Is anyone using IBM microdrive with latest current? Should it work?
My laptop is Toshiba CT3440 running current cvsupped last weekend.
My Cisco Aironet and Linksys network cards are working just fine with
this new card concept.
pccard0: Allocation failed for cfe 0
ata2 at port 0x100-0x10f irq 11
I've used Windows NT boot menu for years to boot FreeBSD from the
second disk on my machines. I've used bootpart DOS program to do this
but now I can't find correct way to do FreeBSD boot block for it.
Earlier there was a diskid definition in some Makefile to change. How
should I do this now?
Giorgos Keramidas writes:
>
> I have FreeBSD installed on two primary slices of my machine, as you
> can see from the df(1) output below. I can boot FreeBSD fine, if I
> copy the boot record of the slice my root partition lives in:
>
> # df /
> Filesystem 1K-blocksUsedA
00
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x1
===
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: [EMAIL PROTECTED]+358 9 52556252 fax
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
ff
SMP: CPU1 apic_initountinialg roize(ot ):
from lint0: 0x00010700 lint1: 0x00010400 TPR: 0x0010 SVR: 0x01ff
SMP: AP CPU #1 Launched!
Tomppa
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotli
Manfred Antar writes:
> Here it is:
> CPU: Overdrive Pentium II/Pentium II Xeon/Celeron (331.11-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x1632 Stepping = 2
>
>Features=0x183fbff
> Programming 24 pins in IOAPIC #0
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu
I haven't been able to build new world since Apr14 or so. I have
cvsupped sources multiple times and buildworld always fails on neqn.
If I remove this next it fails on grog and so on. Any good ideas
what's wrong?
Tomppa
c++ -O -pipe
-I/f/local/sup/5.0/gnu/usr.bin/groff/src/prproc/eqn/../..
Steve Kargl writes:
> On Wed, Apr 24, 2002 at 02:19:29AM +0300, Tomi Vainio - Sun Finland - wrote:
> > I haven't been able to build new world since Apr14 or so. I have
> > cvsupped sources multiple times and buildworld always fails on neqn.
> > If I remove this ne
I'm running current cvsupped two days ago. This time my X broke
down. It don't accept anything from keyboard. Situation is same when
using xdm or startx. I think last working world build was done two
weeks ago. XFree86-4.2.0 was built 30.3.2002 and I already tried to
built X-server from scrat
58 matches
Mail list logo
