On Sun, 14 Sep 2003, Ruslan Ermilov wrote:
RE>On Thu, Sep 11, 2003 at 02:44:55PM +0200, Harti Brandt wrote:
RE>>
RE>> Hi,
RE>>
RE>> I just tried to upgrade one of my systems from a static root from july to
RE>> an actual dynamic root. The installworld went fine 'til the place where
RE>> /bin/test
On Sun, Sep 14, 2003 at 07:13:09PM -0700, Doug White wrote:
>Incidentally, if you are getting wrapping even without this, you can use a
>serial console to capture the output. I've had to do this for doing nasty
>ACPI debugging with lots of the options enabled.
For kernel spew, you can also increa
It seems Dario Freni wrote:
> > Could you please boot verbose and mail me the output of dmesg ?
>
> Sure. That's in attachment.
Okies, you need to update as there has been changes since this that
should fix the problem.
-Søren
___
[EMAIL PROTECTED] mai
On Friday, September 12, 2003, at 06:26 pm, Suleiman Souhlal wrote:
I was wondering if it would be a good idea to modify devd and devctl
for them to handle other events than attaching and detaching devices..
For example, they could be used to mark a network interface as down,
when the network
(...)
> >> unexpected soft-update inconsistency, unable to write block, etc.
> >>
> >> going back to my 9/9/2003 "good" kernel, it works.
> >
> > i tried to use my old kernel; build with sources from fbsd 5.1 release).
> > i rebooted the system and started fsck -y /usr again but the same
> > probl
This is an automated bi-weekly mailing of the FreeBSD 5.2 open issues list.
The live version of this list is available at:
http://www.FreeBSD.org/releases/5.2R/todo.html
Automated mailing of this list will continue through the release of
FreeBSD 5.2.
FreeBSD 5.2 Op
Terry Lambert wrote:
Wesley Morgan wrote:
It's also unfortunate that this protection does not seem to extend to
libaries. I've had some in-use X libraries get overwritten with some very
colorful results.
So send patches.
I did a year ago :-) See PR 37554. (Not the original patch, the
s
With a recent version of -current (09-14-2003) I can no longer write to
a floppy drive with mtools commands. I get the following when trying to
delete a file:
plain_io: Bad address
buffer_flush: write: Bad address
plain_io: Bad address
buffer_flush: write: Bad address
plain_io: Bad address
buffe
As reported on Fri, 05 Sep 2003, I am seeing a hang on boot when I
have the CD-RW/DVD installed in my T30's ultrabay. When I remove
the drive the system boots fine. Having a CD in the drive does not
help. The system hangs hard enough that I have to hit the power
button to get it's attention.
Is
bad block 8239054478774324592, ino 3229486
bad block 7021770428354685254, ino 3229486
panic: Negative bio_offset (-15050100712783872) on bio 0xc7725d50
Debugger("panic")
Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0
db> trace
Debugger(c043aa25,c04ac1c0,c0435bc2,cd1d1980,100) at Debugge
8239054478774324592 = 0x72570065646F4D70 = "rW\0edoMp"
7021770428354685254 = 0x617257006C6C6946 = "arW\0lliF"
That looks suspicious to me...
In message <[EMAIL PROTECTED]>, Kris Kennaway writes:
>
>--OgqxwSJOaUobr8KG
>Content-Type: text/plain; charset=us-ascii
>Content-Disposition: inline
>
>ba
On Mon, Sep 15, 2003 at 08:24:24PM +0200, Poul-Henning Kamp wrote:
>
> 8239054478774324592 = 0x72570065646F4D70 = "rW\0edoMp"
>
> 7021770428354685254 = 0x617257006C6C6946 = "arW\0lliF"
>
> That looks suspicious to me...
Suspicious as indicating a kernel bug, or suspicious as in this panic
is sp
At the start of the weekend, I made a typo in a commit that changed
vmapbuf() to use a new pmap function. The result was that raw disk
access sometimes failed. I recognized and fixed the problem last
night. Simply update your vfs_bio.c to the latest version and
you should be fine.
Sorry for the
> i recently switched from mandrake to freebsd. i used a second system,
> to install freebsd 5.1 (release) on a 15 gb western digital disk. i
> installed the whole system without problems and managed to start gdm and
> gnome2. everything worked fine and performance (launching gdm, gnome2
> and fir
Hi today, cvsup'ed my source and build world ...
and now get an so called
Bus error
while i want to su, anyone know about it (or fixed it)
tnx
wasa
there is a fine line bet
As a status report, a recent CVSup fixed the phantom ad3 issue, but...
ATAng is failing to allow my DVD+RW to cut DVD+R's. growisofs fails
with 'permission denied' as it's penultimate error ... even when run
as root. It also seems to coaster the DVD ... which is getting
expensive.
This is all u
Thus spake Nate Lawson ([EMAIL PROTECTED]) [13/09/03 14:42]:
> The post you reference shows the user with a kernel that has both APM and
> ACPI installed, apparently. This is not valid.
>
> Please report your kernel config. If GENERIC in 2003/9/6 booted fine with
> ACPI and then your rebuilt ker
Hi There.
Someone knows why the Freebsd wireless Access Point work so bad on
Freebsd 5.1??
I try lot of thing but I couldn't make it work fine, the wireless card
crash the connection , the speed is very slow whan is working, is
imposible to use. but same setting , same wireless card, work perfe
On Mon, Sep 15, 2003 at 09:42:27AM +0200, Harti Brandt wrote:
> On Sun, 14 Sep 2003, Ruslan Ermilov wrote:
>
> RE>On Thu, Sep 11, 2003 at 02:44:55PM +0200, Harti Brandt wrote:
> RE>>
> RE>> Hi,
> RE>>
> RE>> I just tried to upgrade one of my systems from a static root from july to
> RE>> an actual
On Thu, Sep 11, 2003 at 02:44:55PM +0200, Harti Brandt wrote:
>
> Hi,
>
> I just tried to upgrade one of my systems from a static root from july to
> an actual dynamic root. The installworld went fine 'til the place where
> /bin/test is installed. At that point the installation stopped with "ELF
(To recap: I'm having ACPI problems on a DFI CD70-SC, with both 5.1-R and
5-CURRENT. Booting GENERIC doesn't show any problems, however, so there's a
good chance it's a misconfiguration issue.)
Thus spake Damian Gerow ([EMAIL PROTECTED]) [15/09/03 17:34]:
> It's attached. There's no APM in there
Hi There .
I have in comming a couple a Proxim 8480- pcmcia , with Atheros
Chipset and 8482- pci .
someone knows if this card work on Freebsd?
thanks
--
Marcos Biscaysaqu
Systems Administrator
ThePacific.Net Ltd.
___
[EMAIL PROTECTED] mailing lis
On Mon, 15 Sep 2003, Kris Kennaway wrote:
> bad block 8239054478774324592, ino 3229486
> bad block 7021770428354685254, ino 3229486
> panic: Negative bio_offset (-15050100712783872) on bio 0xc7725d50
> Debugger("panic")
> Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0
> db> trace
> Deb
On Tue, Sep 16, 2003 at 10:42:38AM +1000, Bruce Evans wrote:
> This is either disk corruption or an ffs bug.
Thanks. The disk this occurred on is a flaky IBM drive which
periodically experiences other kinds of FS corruption, so I'm inclined
to blame it.
Kris
pgp0.pgp
Description: PGP signa
All,
I'd like to give a status report for 4.x and 5.x for the developers and
users who didn't attend the DevSummit this past weekend.
4.9:
The 4.9 release is likely going to be pushed back for a few weeks while
the recent instability reports are tracked down. The target goal is two
weeks, but h
On Fri, Sep 12, 2003 at 08:54:59AM +0200, Morten Rodal wrote:
> A little bit of history first. I am having great trouble in running
> any of the Mozilla web browsers under -CURRENT with libkse. (If you
> are really interested see the thread on threads@)
>
> When I ran Mozilla Firebird with the -
I tried to install the 9/15 snapshot which looks like it now supports
Adaptec SATA and Adaptec 1200A Raid controllers. Unfortuneatly on two
systems I tried to install this on, both failed with the error /dev/ad4s1a
no device present.
Since devices are automatically created in 5.X is there any
On Mon, Sep 15, 2003 at 11:18:24PM +0300, Ruslan Ermilov wrote:
> You mean you upgrade to RELENG_5_1? Beware that this branch
> is currently not buildable: libpthread build is broken.
Eh? By `this branch' you mean RELENG_5_1? How is it broken? If
there is a problem (I don't know of any --- it
On Mon, Sep 15, 2003 at 03:54:09PM -0500, Jacques A. Vidrine wrote:
> On Mon, Sep 15, 2003 at 11:18:24PM +0300, Ruslan Ermilov wrote:
> > You mean you upgrade to RELENG_5_1? Beware that this branch
> > is currently not buildable: libpthread build is broken.
>
> Eh? By `this branch' you mean RELE
Try without the -j option.
-Mike
On Mon, 15 Sep 2003, Didier Rwitura wrote:
> Date: Mon, 15 Sep 2003 15:13:30 -0400
> From: Didier Rwitura <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: Upgrading to FreeBSD 5.1
>
> I am trying to upgrade my sysstem from 4.8-RELE
On Mon, Sep 15, 2003 at 03:13:30PM -0400, Didier Rwitura wrote:
> I am trying to upgrade my sysstem from 4.8-RELEASE-p4 to 5.1
>
> and i getting this error message when I run "make -j4 buildworld"
>
>
> [admin]/usr/src(101)#make -j4 buildworld
> Running test variables
> PASS: Test variables de
I am trying to upgrade my sysstem from 4.8-RELEASE-p4 to 5.1
and i getting this error message when I run "make -j4 buildworld"
[admin]/usr/src(101)#make -j4 buildworld
Running test variables
PASS: Test variables detected no regression, output matches.
Running test targets
PASS: Test targets de
On Mon, Sep 15, 2003 at 03:13:30PM -0400, Didier Rwitura wrote:
> I am trying to upgrade my sysstem from 4.8-RELEASE-p4 to 5.1
>
> and i getting this error message when I run "make -j4 buildworld"
Does it actually stop there, or does it go on to rebuild make as the message
suggests it will, and
33 matches
Mail list logo
