(To recap: I'm having ACPI problems on a DFI CD70-SC, with both 5.1-R and
5-CURRENT. Booting GENERIC doesn't show any problems, however, so there's a
good chance it's a misconfiguration issue.)
Thus spake Damian Gerow ([EMAIL PROTECTED]) [15/09/03 17:34]:
> It's attached. There's no APM in there. I did some more testing -- GENERIC
> works for the -CURRENT date I stated before, and 5.1-R. As soon as I
> compile my own kernel, it breaks.
>
> I'm working on compiling this with debugging, so I can take a closer look at
> what's going on.
Okay, here's a backtrace with debugging. Unfortunately, when dropped to the
debugging prompt, I don't know what to do. Attached is the kernel config I
used to generate this on 5.1-R, I can re-do this on -CURRENT if need be.
Here's a snippet of boot, and the stack backtrace:
...
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04b8000
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04b81f4
...
real memory = 536870912 (512 MB)
avail memory = 516313088 (492 MB)
panic: pmap_mapdev: Couldn't allocate kernel virtual memory
Stack backtrace:
backtrace(c035b0cc,c03baea0,c0372994,c04dabbc,100) at backtrace+0x17
panic(c0372994,c036f000,0,0,0) at panic+0x93
pmap_mapdev(1fff3000,c036ec14,c04dac48,c04dabcc,c048e880) at pmap_mapdev+0x4b
AcpiOsMapMemory(1fff3000,0,c036ec14,c04dabbc,c04dabc4) at AcpiOsMapMemory+0x1e
AcpiTbGetThisTable(c04dac48,c04dac00,c04dac58,c04dac48,c04dac48) at
AcpiTbGetThisTable+0xf0
AcpiTbGetTableBody(c04dac48,c04dac00,c04dac58,c0387ebc,c036ec14) at
AcpiTbGetTableBody+0x4c
AcpiTbGetTable(c04dac48,c04dac58,9,1fff3000,0) at AcpiTbGetTable+0x38
AcpiTbGetTableRsdt(c04daca0,c04daca0,c04dacb4,1,f6010) at AcpiTbGetTableRsdt+0x23
AcpiLoadTables(c04a8bc0,c04a49ac,0,0,0) at AcpiLoadTables+0xa6
acpi_identify(c04a7528,c151cb00,c0379a14,c1506190,c151cb00) at acpi_identify+0xb4
DEVICE_IDENTIFY(c04a7528,c151cb00,c151cb00,c151cb00,c04dad18) at
DEVICE_IDENTIFY+0x50
bus_generic_probe(c151cb00,c3fcc098,c04dad34,c01da1b8,c151cb00) at
bus_generic_probe+0x2e
nexus_attach(c151cb00,c3fcc098,c0379a1c,c151cb00,c151d000) at nexus_attach+0x14
DEVICE_ATTACH(c151cb00,c151cb00,0,c14ea5d8,1) at DEVICE_ATTACH+0x48
device_probe_and_attach(c151cb00,c14ea5d8,c04dad80,c0321635,c151d000) at
device_probe_and_attach+0x7d
root_bus_configure(c151d000,c0371fdc,0,c04dad98,c01960a5) at
root_bus_configure+0x28
configure(0,4d7000,4d7c00,4d7000,0) at configure+0x35
mi_startup() at mi_startup+0xb5
being() at begin+0x2c
Debugger("panic")
Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0
db> print
c01c08b0
db> show pcpu
cpuid = 0
curthread = 0xc03b4640: pid 0 "swapper"
curpcb = 0
fpcurthread = none
idlethread = 0xc151f850: pid 11 "idle"
currentldt = 0x28
db> show map
Task map 0xc01c08b0: pmap=0x4de80574, nentries=604293056, version=742228750
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x4c70500
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc02f3a40
stack pointer = 0x10: 0xc04da940
frame pointer = 0x10: 0xc04da960
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = resume, IOPL = 0
current process = 0 (swapper)
kernel: type 12 trap, code=0
Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0
db>
Given that I caused a panic while in the debugger, and that I don't know
what I'm looking for, I stopped here. (Further 'show map's didn't result in
a panic, however.)
Note that if I /don't/ boot with ACPI, I can boot just fine, with no power
management.
ident pandora
machine i386
cpu I686_CPU
maxusers 0
makeoptions DEBUG=-g
options DDB
options DDB_TRACE
options KTRACE
options DIAGNOSTIC
options INCLUDE_CONFIG_FILE
options CPU_FASTER_5X86_FPU
options CPU_UPGRADE_HW_CACHE
#options CPU_WT_ALLOC
options MAXMEM=(512*1024)
options DEVICE_POLLING
options HZ=1000
device isa
device pci
device agp
device speaker
device random
device pty
device md
device npx
device sio
options CONSPEED=115200
options GEOM_BDE
options GEOM_BSD
options GEOM_VOL
options SCHED_4BSD
options COMPAT_43
options COMPAT_FREEBSD4
options SYSVSHM
options SYSVSEM
options SYSVMSG
options INET
options INET6
options IPSEC
options IPSEC_ESP
device ether
device loop
device bpf
device disc
device gif
device faith
device stf
options IPFILTER
options IPFILTER_LOG
options IPFILTER_DEFAULT_BLOCK
options PFIL_HOOKS
options RANDOM_IP_ID
options ACCEPT_FILTER_DATA
options ACCEPT_FILTER_HTTP
options TCP_DROP_SYNFIN
options FFS
options NFSCLIENT
options NFSSERVER
options PROCFS
options PSEUDOFS
options SOFTUPDATES
options UFS_DIRHASH
options UFS_EXTATTR
options UFS_EXTATTR_AUTOSTART
options UFS_ACL
options _KPOSIX_PRIORITY_SCHEDULING
options P1003_1B_SEMAPHORES
#options MAC
#options MAC_BSDEXTENDED
#options MAC_SEEOTHERUIDS
# These are worth looking into, but require configuration
#options MAC_BIBA
#options MAC_LOMAC
#options MAC_MLS
# These two are also worth looking at, and take less configuration
#options MAC_PARTITION
#options MAC_PORTACL
device atkbdc
device atkbd
options KBD_INSTALL_CDEV
device vga
options VGA_ALT_SEQACCESS
device splash
device sc
#device daemon_saver
#device fade_saver
device fire_saver
#device green_saver
#device logo_saver
#device rain_saver
#device star_saver
#device warp_saver
device ata
device atadisk
device miibus
device fxp
device smbus
device ichsmb
device smb
device iicbus
device iicbb
device iicsmb
#device crypto # core crypto support
#device cryptodev # /dev/crypto for access to h/w
#
#device rndtest # FIPS 140-2 entropy tester
#
#device hifn # Hifn 7951, 7781, etc.
#options HIFN_DEBUG # enable debugging support: hw.hifn.debug
#options HIFN_RNDTEST # enable rndtest support
#
#device ubsec # Broadcom 5501, 5601, 58xx
#options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug
#options UBSEC_RNDTEST # enable rndtest support
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
