Hi,
Make release on current is broken. It dies with:
--
>>> Filesystem is 1440 K, -52 left
>>> 4000 bytes/inode, 10 left
touch release.9
0 blocks
Setting up CDROM distribution area
0 blocks
0 blocks
0 blocks
0 blocks
...
0 blocks
0 blocks
0 blocks
cp: /usr/src/rel
Hello,
I first made 50MB primary partition (MS-DOS's meaning)
on my 20GB IDE disk and tried to use the rest for FreeBSD current.
But boot.flp/mfsroot.flp made from current snapshots doesn't recognize
dos partition.
Anyone has any idea ?
--
Keizo SHIMIZU (清水惠三) <[EMAIL PROTECTED]>
On Wed, 19 Jan 2000, Terje Elde wrote:
> Because of copyright issues OpenSSL is being built with -DNO_IDEA. IMHO
> it's bad to do this for all systems, as it's only limited in some
> countries.
>
> What I'm wondering if we could do is to add a COUNTRY=whatever, which
> could be used to look up a
Of all the gin joints in all the towns in all the world, arnee had to walk
into mine and say:
> FreeBSD 4.0-CURRENT-2118-08:18 #4: Tue Jan 18 13:17:49 PST 2000
> root@groovinit:/usr/src/sys/compile/GROOVINIT
> Timecounter "i8254" frequency 1193182 Hz
> Timecounter "TSC" frequency 249
that's very accurate. you'd be better off getting a SNAP image and
upgrading your system from that.
that is, if you really need to do it now.
i'd just wait, untill the final release, since it's coming up Real Soon
Now.
-- jan
On Thu, 20 Jan 2000, Matt M. wrote:
> Just wondering what potentia
:> Hmm. If possible I would try backing away from the ata driver entirely
:> and going back to the 'wd' driver. This isn't to say that the ata
:> driver is the problem, but it *could* be the problem. A number of peopl
:e
:> have had problems with the ata driver. There isn'
Just wondering what potential problems I am facing by going from
3.4-release to -current. I was told on irc that my chances may not be
well.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Matthew Dillon wrote:
>
> :Thanks for the help matt. Here is the 'dmesg'...
> :
> :arnee
>
> Hmm. If possible I would try backing away from the ata driver entirely
> and going back to the 'wd' driver. This isn't to say that the ata
> driver is the problem, but it *could* be the pro
:Thanks for the help matt. Here is the 'dmesg'...
:
:arnee
Hmm. If possible I would try backing away from the ata driver entirely
and going back to the 'wd' driver. This isn't to say that the ata
driver is the problem, but it *could* be the problem. A number of people
have ha
On Thu, 20 Jan 2000, Poul-Henning Kamp wrote:
> In message <[EMAIL PROTECTED]>, Matthew Dillon writes:
>
> >I am still getting 'R/W mount of / denied' failures when rebooting a
> >crashed -current machine. It thinks / is dirty but the fsck on it ran
> >just fine. If I immediately /
On Thu, 20 Jan 2000 18:53:12 CST, Raul Zighelboim wrote:
> the last 3 days of current 'make buildworld' have ended with:
>
> speed.o(.text+0x60a): undefined reference to `RSA_PKCS1_RSAref'
So you haven't been reading your -current mail for 3 days? Bad
pussycat. :-)
As stated several times o
"joanra" <[EMAIL PROTECTED]> wrote:
> I have done all what you have told me to do, but it still doesn't work. Now
> i have another problem, i have removed the DEVICES WD* (as you told me) and
> i can't mount partitions. It mounts WD on / but just as READ-ONLY and i
> can't do anything, How could
Matthew Dillon wrote:
> :Fatal trap 12: page fault while in kernel mode
> :fault virtual address = 0x8bc93139
> :fault code = supervisor read, page not present
> :instruction pointer= 0x8:0xc018aa5f
> :stack pointer = 0x10:0xc437be0c
> :frame pointer
* Jim Bloom <[EMAIL PROTECTED]> [000120 18:02] wrote:
> In you fix below, shouldn't the second block of NTOHx actually be HTONx. I
> realize that this works because the functions are the same, but it should be
> coded correctly.
>
> Jim Bloom
> [EMAIL PROTECTED]
>
> + NTOHL(th->th_seq);
>
In article <[EMAIL PROTECTED]>,
Warner Losh <[EMAIL PROTECTED]> wrote:
>
> I hit this problem as well. Put 'delete' in your cvsup file.
> Otherwise you'll get screwed. This is a misfeature of cvsup, imho,
I'm sorry you think so. I did it that way for backward compatibility
with sup. If I ha
On Jan 20, 5:41pm, Alfred Perlstein wrote:
} Subject: half-fix for stream.c
} you can find it at:
}
} http://www.freebsd.org/~alfred/tcp_fix.diff
Don't you want to defer the checksum even further (after the bogus
packets have been dropped)? It doesn't look like the change you
made will save an
you can find it at:
http://www.freebsd.org/~alfred/tcp_fix.diff
--
-Alfred Perlstein - [[EMAIL PROTECTED]|[EMAIL PROTECTED]]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Hello there
the last 3 days of current 'make buildworld' have ended with:
speed.o(.text+0x60a): undefined reference to `RSA_PKCS1_RSAref'
/usr/local/lib/libcrypto.a(rsa_lib.o): In function `RSA_new_method':
rsa_lib.o(.text+0x91): undefined reference to `RSA_PKCS1_RSAref'
/usr/local/lib/libcrypto.
Bill Fumerola wrote:
>
> On Wed, Jan 19, 2000 at 03:50:49PM -0700, Wes Peters wrote:
>
> > Mmm... Good point. This means updating code and compiling a new kernel
> > every time Joe's hardware company sticks their own name on a generic OEM
> > PCI or PCCard, doesn't it? I love this industry.
>
I have done all what you have told me to do, but it still doesn't work. Now
i have another problem, i have removed the DEVICES WD* (as you told me) and
i can't mount partitions. It mounts WD on / but just as READ-ONLY and i
can't do anything, How could i mount it whith writing permisions to contin
In message <[EMAIL PROTECTED]> "David O'Brien" writes:
: On Thu, Jan 20, 2000 at 11:01:10AM -0800, Tim Moore wrote:
: > CVS'uped today:
: ...
: > gcc/version.c is "dead" in my CVS repository. Has my repository been
: > corrupted somehow?
:
: Please try again. Did you change release tags or som
It is almost done. A working and very lightly tested version of the code will
be made available on Monday (Jan 24). It should be considered alpha quality,
I would not recommend running important NFS servers with this code.
--
David Cross | email: [EMAIL PROTECTED]
In message <[EMAIL PROTECTED]>, Matthew Dillon writes:
>I am still getting 'R/W mount of / denied' failures when rebooting a
>crashed -current machine. It thinks / is dirty but the fsck on it ran
>just fine. If I immediately /sbin/reboot again the machine comes up
>normally.
metoaddr.po.tmp etherent.po.tmp savefile.po.tmp bpf_filter.po.tmp
bpf_image.po.tmp scanner.po.tmp version.po.tmp libpcap_p.a
rm -f grammar.So pcap-bpf.So pcap.So inet.So gencode.So optimize.So
nametoaddr.So etherent.So savefile.So bpf_filter.So bpf_image.So scanner.So
version.So grammar.so pcap-bp
At 19:44 20/01/00 +0100, Anton Berezin wrote:
>On Fri, Jan 21, 2000 at 04:11:24AM +1100, james wrote:
>
> > I was going to use sysinstall's disklabel to repartition/relabel one
> > of my drives, but when i went into it in the post-installation menu it
> > said:
>
> > No disks found!
>
> > BTW i'm
On Thu, Jan 20, 2000 at 11:01:10AM -0800, Tim Moore wrote:
> CVS'uped today:
...
> gcc/version.c is "dead" in my CVS repository. Has my repository been
> corrupted somehow?
Please try again. Did you change release tags or something? Possibly
checked out RELENG_3 on top of the HEAD or somethin
Hi when i run freebsd, display:
Mounting root from ufs: /dev/ad2s1a
no such device ad
setrootbyname failed
ffs_mountroot: can't find rootvp
root mount failed: 6
mounting root from ufs: wd2s1a
swapon: /dev/ad2s1b: device not configure
Automatic reboot in ptogress
can't open /dev/ad2s1a: device not
CVS'uped today:
cd /usr/src/gnu/usr.bin/cc/cc_tools; make build-tools
cannot open
/usr/src/gnu/usr.bin/cc/cc_tools/../../../../contrib/gcc/version.c: no
such file
"/usr/src/gnu/usr.bin/cc/cc_tools/../Makefile.inc", line 28: warning: "sed
-e 's/.*\"\([^ \"]*\)[ \"].*/\1/' <
/usr/src/gnu/usr.bin/cc
On Fri, Jan 21, 2000 at 04:11:24AM +1100, james wrote:
> I was going to use sysinstall's disklabel to repartition/relabel one
> of my drives, but when i went into it in the post-installation menu it
> said:
> No disks found!
> BTW i'm using 4.0-CURRENT (obviously), and i cvsupp'd and make world
I am still getting 'R/W mount of / denied' failures when rebooting a
crashed -current machine. It thinks / is dirty but the fsck on it ran
just fine. If I immediately /sbin/reboot again the machine comes up
normally.
The devices are all up to date (and in anycase couldn't be
Hi,
I was going to use sysinstall's disklabel to repartition/relabel one of my
drives, but when i went into it in the post-installation menu it said:
No disks found! Please verify that your disk controller is being
properly probed at boot time. See the Hardware Guide on the
Documentation me
["Brian J. Swetland" <[EMAIL PROTECTED]>]
>
> I'm interested in mucking about with the devfs stuff a bit -- is there
> currently any active developer/maintainer/docs? I grabbed the 4.0
> snapshot from the 17th, installed it, grabbed the kernel sources from
> CVS, got stuff building and figured
:Helllo,
:
:I am experiencing problems regarding the swap handler.
:
:I am running 4.0-CURRENT FreeBSD 4.0-CURRENT #10
:
:The box is running apache-1.3.9, cucipop v1.32, and sendmail 8.9.3, and
:also runs as an NFS client.
:
:Kernel is configured with 512 MAXUSERS, swap device is 400MB with
:real
On 20-Jan-00 Satyajit Das wrote:
> please note, i wrote email address: [EMAIL PROTECTED]
> and in body : subscribe freebsd-question
The list is called freebsd-questions not freebsd-question.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the b
Dear sir:
We are one of the largest Ceramic tiles and Sanitary ware
manufacturer in the China.specializing in producing wall and floor
tiles with large production scale, complete product varieties and
sizes and excellent prestige. our Group has introduced world advanced
technologies and equipme
do anyone help me subscribe freebsd-question.
I have so many question which i like to share with freebsd-question.
please help anyone , how can i subscribe in freebsd-question mailing list.
please note, i wrote email address: [EMAIL PROTECTED]
and in body : subscribe freebsd-question
may i d
-- Forwarded message --
Date: Wed, 19 Jan 2000 15:35:23 +0100 (CET)
From: chrw <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: swap_pager_getswapspace: failed (4.0-CURRENT)
Helllo,
I am experiencing problems regarding the swap handler.
I am running 4.0-CURRENT FreeBS
Subject says all! This evening i will try a patch for the ata driver so
maybe all my
hardware at home will work again with current when certain patches are
applied.
--
Fritz Heinrichmeyer mailto:[EMAIL PROTECTED]
FernUniversitaet Hagen, LG ES, 58084 Hagen (Germany)
tel:+49 2331/987-1166 fax:9
-On [2119 08:00], Warner Losh ([EMAIL PROTECTED]) wrote:
>In message <[EMAIL PROTECTED]> Chris Piazza writes:
>: I *thought* I noticed it was different. I actually find this pretty
>: annoying because it wraps almost all of the lines and makes it difficult
>: to read dmesg.
>
>I don't mind th
Hi all,
Because of copyright issues OpenSSL is being built with -DNO_IDEA. IMHO
it's bad to do this for all systems, as it's only limited in some
countries.
What I'm wondering if we could do is to add a COUNTRY=whatever, which
could be used to look up a value in a file which could provide inform
On Thu, 20 Jan 2000, Bill Paul wrote:
> Back up. You're leaving out some info.
>
> - When did you buy these cards? (The firmware rev may be an issue.
> knowing when you bought the card helps me figure out if your firmware
> is newer than mine.)
Cards were purchased in the past 6 months.
Of all the gin joints in all the towns in all the world, Paul Reece had to
walk into mine and say:
> Having a few problems trying to get an ISA Aironet 4800 card working under
> FreeBSD 4.0-CURRENT. I did try with 3.4-RELEASE first with the
> appropriate drivers, but had even less luck.
> Wh
42 matches
Mail list logo