Re: [Elecraft] The next generation KAT500

Alpha was "close" to making this device : https://www.alpharfsystems.com/?p=1494 Unfortunately it is a dream until this moment. 73's Evert PA2KW -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Al Lorona Sent: Thursday, 1 July 2021 19:09 To: Ele

[Elecraft] Different focus

software solutions (algorithms etc.) Just wondering if during the K4 design this “chance” was considered and if so, how this was implemented ? 73, Evert PA2KW (waiting for the K4 kit) __ Elecraft mailing list Home

[Elecraft] K3 : strange behaviour

. 73, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help

[Elecraft] K3 Rotary encoder

I think I have a defect rotary encoder on a K3. It is the one used for setting the bandwidth (Hi/Width). Anyone out here who knows the manufacturer / type number of this rotary encoder? 73. Evert PA2KW __ Elecraft mailing list Home

Re: [Elecraft] K3 Rotary encoder

all as they are in a nasty place (most probably have to remove the LED board but will have to look into it carefully). 73, Evert PA2KW From: Kimo Chun Sent: Sunday, 21 May 2023 18:48 To: David Pratt ; ev...@pa2kw.com Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Rotary encoder

[Elecraft] Knobs

Anyone here who knows the Mouser/Farnell/Digi part number for the knobs (centre and outer) for AF/SUB on the K3? Having several K3’s (not K3S) here for updates/mods/repair and want to replace the broken ones. 73, Evert PA2KW

Re: [Elecraft] K3 Rotary encoder

EFORE soldering the new encoders !!) - put the encoders in place one by one with abt 1.4 mm distance to the front PCB (nylon washer, I used a piece of ty-rap) and solder them. Thanks all for the on-list and off list help and suggestions. 73, Evert PA2KW -Original Message- From: elecraft

[Elecraft] K3 SUB-RX audio

? Any help appreciated. 73, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

Re: [Elecraft] K3 SUB-RX audio

Tnx Joe! That was the solution. 73, Evert PA2KW -Original Message- From: Joe Subich, W4TV Sent: Saturday, 6 January 2024 15:23 To: ev...@pa2kw.com; Elecraft Subject: Re: [Elecraft] K3 SUB-RX audio In Windows Sound Control Panel ... select the Recording tab then select "micro

Re: [Elecraft] K4D for bargain price on eBay

If someone could tell what manufacture/type/model these cores are, I'm sure you can get this done for $20 73, Evert PA2KW / 5T2KW / W8S -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of G4GNX Sent: Tuesday, 12 March 2024 16:13 To: Elecraft Reflector Su

[Elecraft] ptt-key

I changed the PTT-KEY setting in my K3s (K3+KIO3B) to DTR-RTS, but powering off it returns to OFF-OFF. Can this be stored permanent or am I missing something? 73, Evert <https://www.qrz.com/db/PA2KW> PA2KW / <https://www.qrz.com/db/5T2KW> 5T2KW / <https://www.qrz.

Re: [Elecraft] ptt-key

Hi George, Using the power button of the K3s first. 73, Evert PA2KW / 5T2KW / W8S -Original Message- From: ev...@pa2kw.com Sent: Thursday, 4 April 2024 22:58 To: 'George Fremin III' Subject: RE: [Elecraft] ptt-key Hi George, Using the power button of the K3s first.

[Elecraft] K3 reveiver max input voltage

visible on a scope …… that’s not gonna work. 20 mVpp (that’s what I still can reasonably visualize on my scope) is quite a bit more than 50uV. Is that going to be a problem? I wonder what maximum Vpp I’m allowed to inject in the antenna connector without damaging stuff? 73, Evert

[Elecraft] AGC Alignment

ething is wrong here and if not, why was the alignement procerdure setup like this (it could heve been something like: Set RF-Gain full CW, R1 full CCW and check the voltage at pin 5 of U2 to be close to3.80V)? Or did I miss some errata info? Please help. Thanks in advanc

[Elecraft] S-meter alignment

oing wrong (or even worse)? Evert, PA2KW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] Receiver problem

oblem, which I didn't have when I had my first alignment. I checked the boards for short circuits and cold solder joints but didn't see anything (I might oversee something). Unfortunately I have no signal generator available at the moment. Who has got an idea ????

[Elecraft] SN 4836 Alive

ouple off weeks. Thanks for info, help (thanks Don) and the designers. Evert, PA2KW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.

[Elecraft] K2 160 mtr Allignment

rforming, after 2 seconds I get the message "Info 232". In the K2 manual is stated that the procedure most probably is performed on the wrong band (the first lineairization was on 7 Mc isn't it?) Now what to do? Thanks for info in

Re: [Elecraft] K2 160 mtr Allignment

Hi Bob and Jim, Thanks for info! I forgot to read the errata page (ai ai ai)! No one to blame at Elecraft but just myself. This will clear up my "cloudy" mood (hi). Thanks so far. Evert [EMAIL PROTECTED] wrote: Hi Evert, The answer is that you should not align the PLL on 160m

Re: [Elecraft] Re: Stranger than real life

I do! The power of my K2 is mentioned in Watts instead of HP Evert K2 #4836 Paul Gates wrote: I am wondering if we are not getting off topic... I am not sure all these metric stuff has to do with Elecraft radios. Paul Gates Elecraft K1 #231

[Elecraft] KSB2

don't have any idea what to do with this. I checked for a short circuit but it looks like that's not the case. What to do? any suggestion is welcome. Evert, PA2KW (K2 #4836) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.ne

[Elecraft] S-meter / NB

beat the TR7 NB as well. Is there a good way to check if the NB is working properly or as intended? Thanks for answer(s) Evert, PA2KW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. S

Re: [Elecraft] K2, Noise Gen and Spectrogram

Hello James, The noise generator and spectrogram will do the job! Look at the www.n0ss.net webpage and you will find the article and downloadable software including instructions! With me, it worked. Good luck, Evert, PA2KW, K2 #4836 James Kern wrote: I need to set my K2 Filters. After I

[Elecraft] K3 - MKII

ed several things, but I guess I need a hint now. Did not change any settings (as far as I know). Any suggestion? 73's, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://

Re: [Elecraft] K3 - MKII

"none" and back again. After that all seem to work. I forgot to say in the first message that the "Test signal" button did work (K3 > TX and modulating so giving output) I remember trying to click the LED's next to "TX VOICE/DIGITAL" as they were not gr

Re: [Elecraft] K3 - MKII

to homebrewing and DX-ing, not to MS $$$ versions. If I buy a new system, I will get the next generation of MS possibilities and problems. Anyway, I do appreciate the help of an expert! Thanks. 73's, Evert PA2KW __ Elecraft mai

[Elecraft] off topic

Just a short question, Anyone around here who has got the manual of the G800SDX Yeasu Rotor? PLease respond off list 73's, Evert PA2KW Sri for the bandwidth . __ Elecraft mailing list Home: http://mailman.qt

Re: [Elecraft] off topic

Thanks for all responses. Great! -Oorspronkelijk bericht- Van: Elecraft [mailto:elecraft-boun...@mailman.qth.net] Namens Evert Bakker Verzonden: woensdag 6 augustus 2014 10:32 Aan: elecraft@mailman.qth.net Onderwerp: [Elecraft] off topic Just a short question, Anyone around here who has

Re: [Elecraft] Sensitivity - Was K4 Observations

We all now (i guess) that decoding below the noise floor needs: Time, timing and repetition.. no formulas needed . 73's, Evert PA2KW -Oorspronkelijk bericht- Van: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] Namens Joe Subich, W4TV Verz

Re: [Elecraft] band decode/antenna switch controller

A Q abt the KRC2: Is it possible two switch to two different antennes within one band but based on frequency span ? Example: 3.500 - 3.650 Mc Antenna 1 3.650 - 3.800 Mc Antenne 2 73's, Evert PA2KW __ Elecraft mailing list

Re: [Elecraft] K3 VFO-B knob replacement notes

Hello Geert, I guess the VFO-B knob for the K3S will fit, doesn't it? The K3S is still available. Most probably available with a different part number. Just verify if the diameter of the ax K3 vs K3s is the same. 73's, Evert PA2KW / 5T2KW -Oorspronkelijk bericht- Van: ele

RE: [Elecraft] KPA100 R 19 R20 question

Werner, The inductive resistors are light-blue/grey. I replaced mine as well. They should have a reddish-brown colour now. Also a capacitor C31 should be replaced (was 0.033uF and should be 0.22 uF) 73's, Everet PA2KW ___ Elecraft mailing list Post t

[Elecraft] K2 Remote KPA100

Hello all, Before I start to look in the manuals... Do I need the KIO2 module when I want to use my KPA100 in a separate enclosure? Do I need more then that? Thanks in advance 73's, Evert PA2KW ___ Elecraft mailing list Po

[Elecraft] K2 : quite 7 Mc

t? No idea. I do have the KXV60 installed as well for the 144 Mc / 28 Mc transverter job. Who has got a bright idea. I guess it must be something simple but... 73's, Evert PA2KW ___ Elecraft mailing list Post to: Elecraft@mailman.qth

RE: [Elecraft] K2 : quite 7 Mc

Problem solved. I Just removed the KIO2 and the KXV2, tested the K2 (all OK) reinserted the KXV2 (all OK) and finally reinserted the KIO2 (all OK) Magic hands I suppose :-). Have a nice weekend. 73's, Evert PA2KW >>>> After installing my KIO2 module in the K2 (I want my KPA

[Elecraft] KPA100 power levels

capacitor on J15 (pins 1 and 3) 73's, Evert PA2KW K2 SN4836 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/ma

[Elecraft] VHF and NB

ve my K2 with it's extreme good Price/Quality performance. I think even Elecraft itself won't be able to beat this P/Q factor. But at the end, we are all like little kids; we want more.. a K3. 73's, Evert PA2KW Happy owner of: Elecraft K2/100 (SN4836) Drake TR7/R7

RE: [Elecraft] VHF and NB

Thanks Waye! If you need additional info on sequencing, I'm most willing to help. Just let me know when you're ready (this will take a while I guess hi). On the NB: when the season starts, I will try to make the NB pics on the scope. GL. Evert PA2KW -Original Message- F

[Elecraft] SO2R

Hello, May be a stupid question from a VHF-er. What does SO2R mean? I thought that was a Polish call, but that doesn't make any sense here hi 73's, Evert PA2KW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a

RE: [Elecraft] K3/100 antenna connector(s)

I would prefer the BNC. Quick, good and easy. What else do you want? Evert PA2KW -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of JACrux Sent: Friday, May 04, 2007 22:16 To: elecraft@mailman.qth.net Subject: [Elecraft] K3/100 antenna connector(s) It

RE: [Elecraft] Neurotic about Toroids

fe. I did it this way, and none of the wires broke. If you do, there is plenty of spare wire to rewind the core. Success and have fun. Evert, PA2KW K2 : SN4836 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lee Sent: 23 October 2005 10:37 To

[Elecraft] KPA100

t might need this 8T line? Thanks in advance. Evert, PA2KW K2 : sn 4836 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman

RE: [Elecraft] KPA100

Hello Don, Thanks for info and practical solution. I will do it right away. Thanks. Whish you and all others a prosporous 2006. Evert, PA2KW -Original Message- From: Don Brown [mailto:[EMAIL PROTECTED] Sent: 29 December 2005 21:58 To: [EMAIL PROTECTED]; Elecraft e-mail reflector

[Elecraft] K2 Contest

mperature changes. It also stresses the solder point on the PCB. In general: Is the K2 designed to operate at full specs during contests/expeditions under any normal environmental condition (0 deg C to 40 deg C) without cooling down periods? Evert, PA2KW K2 : SN4836 _

[Elecraft] K2 contest

ty sure it did when I aligned the KPA100. I also tightened the screws of the final and driver transistors after the contest (first 14 hours of operation), and it was necessary! Conclusion up to now: I'm a very happy user so far! Thanks and 73&#

RE: [Elecraft] alignment K2

Hello Peter, I can help if necessary. Send me a personal mail to [EMAIL PROTECTED] 73's, Evert -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Boereboom Sent: 06 March 2006 21:21 To: elecraft@mailman.qth.net Subject: [Elecraft] alignment K2

[Elecraft] KNB2

ely I had no result in my specific case. I just wanted to let you know. Still story will continue unless.. Evert, PA2KW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info

[Elecraft] High Cur

10 Mc bothers me as there are the currents excessive in relation to the other bands.. What could be wrong? Thanks in advance, 73's, Evert PA2KW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post t

[Elecraft] PWR control

rect pick-up from the K2. It seems that the power control circuitry is rather HF sensitive (for 144 Mc). The power LED-bar of the K2 (S-meter) showed the change in power accordingly. Anybody else with this experience? And a remedy may be (to prevent re-inventin

RE: [Elecraft] Delay between key in, key out on XV

e the antenna. If you use the relay this way, a failure is easily detected as your receiver is "dead". 73's and Good luck Evert PA2KW I've been searching around and I can't seem to locate any infor

RE: [Elecraft] K3 and Sequencer

her with my homebrew transverter but a "quick and dirty" one. Let's keep in touch. 73's, Evert PA2KW _ I think many of us would use the K3 not only on HF but also for VHF because of the excellent phase noise

RE: [Elecraft] K3 and Sequencer

Sir, It's always good to exchange thoughts about the possible use and features of Elecraft products. I know the products of DEM but all of them doesn't prevent the exiter to give RF if one piece of the added hardware isn't working properly. 73's Evert PA2KW -Origin

RE: [Elecraft] K3 and Sequencer

re several thousands of serious VHF/UHF-ers. We are a market opportunity, not a thread :-). We are not buying Elecraft equipment because its appearance, but because it works so great and meets our expectations! 73's, Evert PA2KW For 144 Mc Ant: 2x16 el Preamp: NF 0.3 dB PA: YL1056 2.9 kW XVRT:

[Elecraft] Audio Keying with K2

again. (open and close PTT). I checked the audio with a Tek-scope but can't see anything strange. It looks like something is blocked inside of the K2... for some reason at a "specified" moment Is there anyone out there who uses CW audio keying? and has some experiences. Th

RE: [Elecraft] noiseblanker

ments that it should work well with ignition type of noise sources. So I was very surprised that I could not see any difference with or without the NB when having troubles with the electric fence. So, you are not the only one having doubts about this NB. Evert, PA2KW -Original Message- Fr

[Elecraft] XVRT sequencing

K2 which gives similar sequence procedures as with the Ten-Tec? Thanks in advance. Evert, PA2KW K2: #4836 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub,

RE: [Elecraft] XVRT sequencing

itching when using the Tune button. I decided to leave the K2 as is and will design my own interface to tackle the needs (starting in the autumn and keep my Ten-Tec running for the moment). Anyway, when finished I'll inform the reflector in case someone is interested. I wish you all a nice

RE: [Elecraft] KNB2 Performance

with different specs available. Evert, PA2KW K2, #4836 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Squarzini Sent: 17 July 2005 18:30 To: elecraft@mailman.qth.net Subject: [Elecraft] KNB2 Performance I too have found the KNB2 lacking in most real world

RE: [Elecraft] AGC Threshold voltage?

wer and maximum limits to give a proper feeling of being normal. Evert, PA2KW K2 #4836 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of NZ8J Sent: 25 July 2005 18:58 To: elecraft@mailman.qth.net Subject: [Elecraft] AGC Threshold voltage? The overall receiver ga

RE: [Elecraft] Looking for Spectrogram v7.x

Hello Piet, I've got version 5V17 which works fine for this purpose! Evert, PA2KW [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Piet Meindertsma Sent: 09 August 2005 15:44 To: elecraft@mailman.qth.net Subject: [Elecraft] Lo

[Elecraft] K3 keyer

ant and learn to coop with the new feeling. But after 2 years I feel ashame for my "bad" CW. I have to accept that I'm not going to learn it "the new way" anymore Can anyone tell me if there is a setting somewhere to solve this which I o

[Elecraft] K3 and Remoterig

listening. 73's, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Pleas

Re: [Elecraft] Sequencer keying with K3/XV-144 without rigblaster?

Lance, This is the only proper way for serious VHF stations. Use your feedback contact of the final RX/TX coaxial relay (which is most probably mounted in the top of your tower) as a final go for the RF out of the K3 by using the TX-Inhibit Line. 73's Evert PA2KW Cu -Original Me

[Elecraft] K3 KXV3 mode

Hello, During the initial calibration test, one is asked to set CONFIG:KXV3 to TEST. This one is not available (just NOT INST and NOR). What am I doing wrong? 73's, Evert PA2KW __ Elecraft mailing list Home:

Re: [Elecraft] K3 KXV3 mode

Thanks! It works! -Original Message- From: Gary Hvizdak [mailto:garyhviz...@cfl.rr.com] Sent: Friday, February 13, 2009 12:45 To: elecraft@mailman.qth.net Cc: ev...@pa2kw.com Subject: RE: [Elecraft] K3 KXV3 mode On Fri Feb 13 06:20:26 EST 2009 Evert Bakker (PA2KW) wrote ... During the

[Elecraft] KPA3 Power calibration

nto a 50 Ohm dummy (using a professional one). And now: What to do if I have a difference between the commanded (5W) output and the measured output (say 7W) ??? Thanks in advance. 73's, Evert PA2KW __ Elecraft mailing

[Elecraft] CW to RTTY

I have firmware version 2.67/1.96. In this version it is still not possible to use CW to RTTY when using SPLIT. Has this been fixed in the newer firmware version? I now use XIT, but this is not so "powerfull". 73'

Re: [Elecraft] CW to RTTY

Hello Dave, I must have been sleeping ... I use FSK-D now and all works fine. I just use it for hunting DX-peds. Just wkd K5D on 18Mc RTTY using the internal CW to RTTY decoder. Thanks for waking me up. 73's, Evert PA2KW _ From: David Yarnes [mailto:w7...@cox.net]

[Elecraft] K3 CW/MIC problems

ter. I did a quick check on several config items, but didn't see anything strange. Please has any body a clue? Is it possible to copy all user parameters from one K3 to another (except calibration parameters off course)? 73

Re: [Elecraft] K3 CW/MIC problems

Subject: Re: [Elecraft] K3 CW/MIC problems VOX on ? Problem solved 73's, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] K3: CW - VOX

Disabling TX-ing can be done by TX-TEST mode, so which specific situation requires disabling the VOX in CW mode? Just curious, no more 73's, Evert, PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/lis

[Elecraft] K3 KRX3 ANT

e SUB-RX on the higher bands together with the main RX with the same antenna and accept an increase of the NF by 3 dB. Do I need the AUX RF BNC installed? 73's, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.n

Re: [Elecraft] "Hot" K3

Has one of you a good suggestion a-priori? 73's, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list h

Re: [Elecraft] "Hot" K3

Thanks Dave, Easy to forget something, but both are the same, ATT=OFF, PRE=ON I just tested it on all bands: same results on all bands. (May be only S-meter offset if possible ?) 73's, Evert PA2KW _ From: David Gilbert [mailto:xda...@cis-broadband.com]

Re: [Elecraft] Elecraft Sales service goes from bad to worse

In the contrary, Service is: SUPER .!. 73's, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list host

[Elecraft] K3 <> Hiel Proset

Later tonight I'll get my Drake TR7 running again and see if the effect is also there (I just guess not). Thanks in advance 73's, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/el

Re: [Elecraft] K3 <> Hiel Proset

Up to now I seem to be on my own with this problem. I did test it with my old TR7 and had no problem. I think I'll ask support to see if they have any clue. Thanks 73's, Evert PA2KW -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.q

Re: [Elecraft] K3 :: switching between data modes

This happens as well when you switch bands :-( 73's, Evert PA2KW I notice that if I select mode and set the bandwidth to, say, 1.5 kHz, then rotate the B VFO through the several data modes, upon returning to I have to readjust the bandwidth control once

[Elecraft] Vacation

Is Elecraft closed these days? (Vacation) 73's, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This

Re: [Elecraft] Vacation

Hi Don, Thanks. I understand, they need their rest to get ready for the next surprises :-) You know, when I've got vacation, I want to spend (a lot of) money . :-) I'll wait patiently then. 73's, Evert PA2KW -Original Message- From: Don Wilhelm [mailto:w3...@embarq

[Elecraft] K3 Data PSK 31

Just tried working PSK 31 (Data Mode) but can't work split. Used the A>B tap twice to copy all info to VFO B. Am I doing something wrong here or did I run into a firmware issue? I did use the XIT, which works. I used the paddles to generate PSK. FW = 3.66 73's

[Elecraft] K3 Mode

I was playing with HRD this afternoon and when swapping bands I ended up on 14 Mc in LSB mode.. I've been trying to get it on USB again but I'm missing something I guess (and didn't even have a beer this afternoon.) Where can set the proper mode again? 73

[Elecraft] K3 Mode

Problem solved. I think the LSB mode is somewhere disabled for 14 Mc. By toggling the mode (up) I didn't get the USB Mode. (For some unknown reason I'm always toggling up until I get what I want). By toggling down I did get back the USB mode. Wheird 73'

Re: [Elecraft] K3 Mode

Hello Don, It was the software (HRD) that did it for me. But it's good to see that at the end WE do have control over the radio :-) 73's, Evert PA2KW -Original Message- From: Don Wilhelm [mailto:w3...@embarqmail.com] Sent: Sunday, September 13, 2009 18:13 To: ev...@pa

[Elecraft] K3 SUBRX

the TX to the receive antenna causing damage. How can I use the Sub-RX connected to the receive antenna on the AUX-RF port and have the audio of the Sub-RX in both ears (without hearing the main receiver)? 73's, Evert PA2KW __ E

Re: [Elecraft] K3 1750Hz roger beep

e is. Liddish behavior is something done by a person, not by technological possibilities. Just my opinion 73's, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/m

Re: [Elecraft] Elecraft

Larry, If your ears go beyond 16 Kc, you won't be pleased. 73's, Evert PA2KW But then I saw the Pro Set K2 on the web site. Any body using one on a K3, as well? de K2GN/Larry K3 - S/N 3278 __ Elecraft mailing list

Re: [Elecraft] Elecraft

o are the most important points for me, not the bells and the whistles. I hope this audio issue will be solved once and the K3 will be perfect (for me). Some issues will be solved, some never. Nothing is perfect, but the K3 comes close. Do whateve

Re: [Elecraft] [K3] Elecraft

nd see what the result will be. Thanks for the reply! 73's, Evert -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of pd0psb Sent: Sunday, November 08, 2009 21:57 To: elecraft@mailman.qth.net Subject: Re: [Elecraft] [K3] Ele

[Elecraft] K3 : Unstable freq during TX

X 10.118,38 Mc Amplifier switched off, Running 80 W I used my second K3 to listen to my own signal. During transmitting (10.118) I turned the Main RX dial and when moving away from 10.114 the effect disappeared gradually. When moved 5Kc up or down it was gone. Any cl

Re: [Elecraft] K3 : Unstable freq during TX

Hello Julian, In the past (2x), but not lately. I might do this again. I'll first check it tomorrow and see if the problem is still there. Thanks for the reply! 73's, Evert PA2KW Julian wrote: Have you tried a VCO c

[Elecraft] K3 and MicroKeyer MKII

re with the MKII (I think..) I'm really puzzled. I thought I might give it a try here. If you feel it's OT, contact me direct. 73's, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listin

Re: [Elecraft] My K3's hissy and noisy audio

nal you are listening to. It's very tiring to listen to. I'm right now at the point of testing with an audio analyzing software tool and will report. The question now is, what can we do about it? 73's, Evert PA2KW __ Elecraft

Re: [Elecraft] My K3's hissy and noisy audio

Are we (dutch) all using the same version of Heil headset? I never noticed this high hiss with my old Telex headphones (with a smaller freq-response I guess) 73's, Evert PA2KW -Original Message- From: Steve Ellington [mailto:n...@carolina.rr.com] Sent: Sunday, April 05, 2009 19:

Re: [Elecraft] My K3's hissy and noisy audio

x27;ll have to wait and see if someone can help me (us) out. 73's, Evert PA2KW -Original Message- From: Jack Brindle [mailto:jackbrin...@earthlink.net] Sent: Sunday, April 05, 2009 21:55 To: ev...@pa2kw.com Cc: 'Maarten van Rossum'; 'Elecraft Group'; 'Gary Sur

Re: [Elecraft] K3 audio

x27;ve got 2 K3's and they both give me the same result. I played with all kind of controls (RX-EQ, AGC-SLP/THR, AGC-S/F, AGC ON/OFF) and there is no difference whatsoever! I apologize for being persistent in this. 73's, Evert PA2KW -Original Message- From: elecraft-boun...

Re: [Elecraft] K3 audio

ain what I hear, it gave me the idea that the word "hiss" may be not the right word for the phenomena I wont to share we you. But I'm not able to make it clearer then I tried so far. I can also say that it is not a pure additional sidetone but it's a combination of several

Re: [Elecraft] K3 audio

Hello Barry, I will try. I saw some recording programs lately on the reflector. I'll try to find them and install it. W'll keep in touch. 73's, evert PA2KW -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of

Re: [Elecraft] Dayton - Initial Reconnaissance

Great news about the K144XV! I just wonder if the K144XV has the possibility to "separate" the RX input and TX output and become available at the back panel? (A lot of VHF Dx-ers use only 1 relay, the one in top of the tower, where the preamp is installed as well.) 73'

[Elecraft] K144XV

Great news about the K144XV! I just wonder if the K144XV has the possibility to "separate" the RX input and TX output and are separately available at the back panel? (A lot of VHF Dx-ers use only 1 relay, the one in top of the tower, where the preamp is installed as well.) 7

  1   2   >