Tnx Joe!
That was the solution.
73, Evert PA2KW
-----Original Message-----
From: Joe Subich, W4TV <li...@subich.com>
Sent: Saturday, 6 January 2024 15:23
To: ev...@pa2kw.com; Elecraft <Elecraft@mailman.qth.net>
Subject: Re: [Elecraft] K3 SUB-RX audio
In Windows Sound Control Panel ... select the Recording tab then select
"microphone (USB Audio CODEC)" - the KIO3B ...
select the Advanced tab and make sure Default Format is to "2 ch, 16 bit, 48000
Hz (DVD Quality)"
73,
... Joe, W4TV
On 1/6/2024 2:11 AM, ev...@pa2kw.com wrote:
> Setup was:
>
> * K3 with SUB-RX and MicroHam MKII
> * ANT 1 = TX antenna, RX-ANT (BNC) = Receive antenna.
>
>
>
> When using the SUB-RX (I think even in Diversity mode), with JTDX I
> was able to “listen” to the Left audio channel which was the SUB-RX
> (receive antenna)
>
>
>
> A while ago I installed the KIO3B board. All seems to work fine but….
>
> Whatever I try to change, I’m not able to “listen” to the SUB-RX with JTDX
> anymore.
>
> I do hear both receivers in my headphone Main = Right ear, Sub = Left ear.
>
> Is the Audio Codec signal a MONO channel or is it a setting in the K3 I
> didn’t think of?
>
>
>
> Any help appreciated.
>
>
>
> 73, Evert PA2KW
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> li...@subich.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
