[Elecraft] In the words of the song :-)

For it's a long, long time, from May to December And I haven't got the time, for the waiting game And the days dwindle down, to a precious few September, November And these few precious days, with my old K2... Tra la la ... ___ Elecraft maili

[Elecraft] K3 Shipping Status Update on Web Site

The K3 shipping status on the web site was last updated on December 27th, 2007 that was 19 days ago. Hoping not to slow down the production line, but when can we expect a new shipping status update soon? Charles - M0BIN K2/100 5901 K3 awaited

[Elecraft] SN 5901

hen I did the inventory check :-) charles ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] SN 5901

s anyone have any comments or suggestions? It's not that I need the power because I'm getting very good on air reports and enjoying myself with QRP. It's just that I want to get the K2 to do what I know it can do. Charles - M0BIN __

[Elecraft] DSP/KPA100 combination

I would like to make contact with any builders who are currently putting together the above combination, or any builders who have recently built such a combination. Thanks in advance, Charles - M0BIN ___ Elecraft mailing list Post to: Elecraft

Re: [Elecraft] DSP/KPA100 combination

On Thursday 01 February 2007 14:21, Lyle Johnson wrote: > Hello Charles! > > > I would like to make contact with any builders who are currently putting > > together the above combination, or any builders who have recently built > > such a combination. > > I'm an

Re: [Elecraft] DSP/KPA100 combination

tie restraint where possible will help in this respect. The one to watch out for is the miniature coax where the joint is easily stressed. Charles - M0BIN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post

Re: [Elecraft] DSP/KPA100 combination

at has the right length of pins, you had better ask Elecraft support that question. 73 from Charles, M0BIN, K2 Nr 5901 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change

Re: [Elecraft] You will no longer the grind enamel when winding toroids (Michel / F6DUL)

On Thursday 08 February 2007 20:44, Michel wrote: > Little tool for the winding of toroids > > During the building of my K2 I was facing some troubles to wind toroids > which had sharp edges grinding the enamel of the copper wire. > I would like to suggest you following trick which I used with succ

[Elecraft] ti adapter cabel

in the paper work for my t1 adapter cable it says that there was a problem with some off that older ft817s .Does any one know off and problems with the ft817nd . thanks Charlie m3xxc ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must

[Elecraft] KAT/100 not working

see no obvious signs of damage. I would be most grateful for any helpful advice. The K2/100 is still working perfectly but through a manual matching unit :-) Charles - M0BIN - K2/100 Nr 5901 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net

Re: [Elecraft] KAT/100 not working

just been my imagination - the thing had been working very hard clattering the relays while I was testing it on all bands (low power into the dummy load) just to make sure. Is there a good reason why it should still be working just on 40m ? Thanks again for your comments Tom. 73 from Charles -

Re: [Elecraft] KAT/100 not working

eek end and keep up the good work. It's the BERU contest this week end which requires a bit of band hopping/search and pounce so the auto atu back in service will be a great help. Many thanks and best regards 73 from Charles - M0BIN - K2/100 Nr 5901 _

[Elecraft] Side Tone

better side tone. If this is so then I may consider building the K2/100. Could some one please help me with this decision? Charles ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr

Re: [Elecraft] K2 circuit breaker

hipped after last December, it already has the upgrade, > but if it is earlier, it is wise to add it. Nr 5901 was shipped on 13th December 2006. Would it contain the upgrade? Charles - M0BIN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.ne

Re: [Elecraft] K2 circuit breaker

On Friday 08 June 2007 09:46, charles wrote: > On Friday 08 June 2007 01:18, Don Wilhelm wrote: > > If you are seeing erratic HI SWR on your antenna, consider that the > > KPA100 could be oscillating (especially if it happens on 40 meters) - if > > that is suspected, I recom

Re: [Elecraft] K3's internal cw keyer

On Monday 30 July 2007 01:39, George wrote: > I don't see anything listed anywhere on the K3's internal CW keyer > features. How many memories, speed range, actuation, etc. > Anyone have this info? One further question - is the weighting adjustable on the K3 CW internal keyer

[Elecraft] K3S RS232 "Y" Connector causing port conflict

ut-of-band frequency over 2 Mhz away. 2. The pandapter frequency readout ceases to function. I assume there is a port conflict, and I wonder if anyone knows the correct pin-out of the RS232 line to the OM amp so that it will be a passive listener on the DB9 cable? T

[Elecraft] K3S RS232 "Y" Connector causing port conflict

Hi Josh, I'm not sure I understand your post. Are you saying use a single line from the K3S RS232 port to the OM2500A RS232 port labelled "TCVR", then a second line from the OM2500A RS232 port labelled "PC" back to the compute

[Elecraft] K3S RS232 "Y" Connector causing port conflict

he OM2500A to _RECEIVE_ signals from the K3S/PC _BUT NOT SEND_ signals to the K3S/PC. Does that make sense? Would like to receive comments on these three possibilities. Thanks for all who responded. Charles K5UA __ Elecraft mailing

[Elecraft] K3S RS232 "Y" Connector causing port conflict

most promising solution since I am using LP-Bridge anyway for Na3P. Thanks for your post. Charles K5UA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] K3S RS232 "Y" Connector causing port conflict

everyone. Charles __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

[Elecraft] K3S RS232 "Y" Connector causing port conflict

that setting AUTOINF to AUTO 1 will send band data on its RS232 port!! That should solve my problem! Will try it. Thanks for your post Eric. Charles __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] K3S RS232 "Y" Connector causing port conflict

One more question Eric. If I need to block the TX lines from the amplifier to the K3, which pins should I break off of the male DB-9 connector? Thanks again for your help. Charles K5UA __ Elecraft mailing list Home: http

Re: [Elecraft] New release of Win4K3Suite...set your clocks!;

I also want to thank Tom for the new release; I just upgraded to 64 bit Win7, and all sorts of mischief ensued. Tom helped sort out driver problems with Com0Com, and with the new Win4K3 I'm back remoting my station. Great support and excellent software. 73, Chuck, N8CL ___

[Elecraft] K3 loses transmit power

I was using the K3 at low power on PSK, and suddenly had no transmit power. Zip. Receive worked fine. All modes/bands/attempted power levels gave no power out. The rig was not in test mode, Config showed Tx inh=off, and KXV3=nor. Unfortunately the K3 is remote--about 250 miles, so an in per

[Elecraft] Chronic loss of KPA-1500 USB and Ethernet Connection Within 60 seconds

typically takes a couple of times to reconnect, but once it reconnects it stays connected until I am ready to shut the station down. I would like to know if anyone else is experiencing this phenomena and if so, is there a solution? Charles K5UA

[Elecraft] PX3 keyboard locking

part of the screen. The only way to recover from a lock is by turning the PX3 off and on. Has anyone duplicated these symptoms, or is there an obvious cause? Otherwise, the new software is VFB! Aloha Charles KH6CS Sent from my iPad

[Elecraft] Has anyone Interfaced a K3S and OM2500A

? 3. If the OM2500A does have to reposition the stepper motors for every band on the way to the intended band, is there some workaround using the K3S memories to go directly to the desired band without stepping through every band on the way to the desired band? Thanks for the helkp, Charles

[Elecraft] K3S DSP filter plots

ch IF shift can be achieved before the filter skirts of the DSP filters interact with the filter skirts of the fixed roofing filters. Charles K5UA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] K3S DSP filter plots

the little signal generator and report my findings on the reflector. If anyone reading this thread has plotted out the 50, 100, 150, or 200 hz DSP filter response curves, please let me know. Charles K5UA __ Elecraft mailing list

[Elecraft] K3S DSP filter plots

the roofing filter skirts. If you have any data on the narrow DSP filter plots, please let me know. Charles K5UA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] K3S DSP Filter Plots

g filter. Thanks to all that replied to my inquiry. Charles K5UA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] M1 - M4 per band quick memories

detail on this as I scan the manual. Can someone help with the procedure to establish M1 - M4 mode specific memories with a band? Also, my K3S Config menu does not have a BAT MIN position. Has it been removed from the Config Menu system? Lots to learn.

[Elecraft] M1 - M4 per band quick memories

Thanks to all that helped me get the memories working. Quite a powerful tool. Charles K5UA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] KPA500 Sporadic Power Hi/Lo

Yeah - it was OK but maybe the Spring Win10 Update changed some settings. Thanks! Best regards, Bret C. Bret Jessee -- Original Message -- From: Grant Youngman To: MaverickNH Cc: elecraft@mailman.qth.net Sent: June 6, 2018 at 1:54 PM Subject: Re: [Elecraft] KPA500 Sporadic Power Hi/

[Elecraft] KPA-1500 Efficiency

% 40M SSB: 59% 20M CW: 52% 20M SSB: 52% 17M CW: 55% 15M CW: 64% 15M SSB: 62% 12M CW: 68% 10M CW: 56% 10M SSB: 58% Does this compare favorably with other KPA-1500 owners? Charles K5UA __ Elecraft mailing list Home: http

[Elecraft] KPA-1500 Efficiency As A Function of Input Power

amount of heat at low power output as at high power output, if I am interpreting the data correctly. I would like to know from Elecraft if this is normal behavior. Charles K5UA __ Elecraft mailing list Home: http://mailman.qth.net

[Elecraft] KPA-1500 Efficiency As A Function of Input Power

Thanks to all that commented. Just wanted to make sure this was normal operating behavior. Seemed counter-intuitive but now I think I understand it. Maybe will run a "Time to Temp" test running low power vs. high power. Just curious. Cha

[Elecraft] No Communication with USB Port on KPA-1500

must we use a virtual COM port? If I remember correctly, I think I use a Flex Virtual COM port before the power surge? Or did the power surge zap the USB port on the KPA-1500? Any help appreciated. Charles K5UA __ Elecraft mailing

Re: [Elecraft] [KPA500] K3S/KPA500/KAT500 - Adjusting TX Power

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http

Re: [Elecraft] [KPA500] K3S/KPA500/KAT500 - Adjusting TX Power

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http

Re: [Elecraft] [KPA500] K3S/KPA500/KAT500 - Adjusting TX Power

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http

[Elecraft] CQRLOG and K3

I've installed CQRLOG logging software on a laptop running Fedora 14 and using the KUSB cable to link to the K3. However I have not yet succeeded in getting the link to work. I suspect that I am guilty of failing to correctly install the KUSB driver. Is there anyone who has

[Elecraft] CQRLOG and K3

driver. Please, can anyone with relevant experience give me some helpful advice? 73 from Charles - M0BIN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] test

test - please ignore __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

Re: [Elecraft] OT Linux for Elecraft K3 use - Which Distribution to use?

ng Windows behind :-) Charles __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help su

Re: [Elecraft] K3

On 14/06/11 13:28, Don Wilhelm wrote: > Switched means that it is powered when the K3 is turned on, no power > when the K3 is off. The P3 and the PR6 both need to use that 12v socket. Charles - M0BIN __ Elecraft mailing list Home

[Elecraft] Kat500

Can we have an indication as to when the KAT500 will become available? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] KPA Utility

When will there be a Linux version? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Pleas

Re: [Elecraft] [K3S] mW TX for WSPR

Hi Frank, I think I see what you are suggesting - matching the power transmitted by each transceiver over a common antenna to assure I'm feeding two different antennas with the same TX power? I'm finding a Magic-T RX Splitter/Combiner https://www.dxengineering.com/parts/svp-sv-rsc-50 Can I u

Re: [Elecraft] [K3S] "Hardware Sequencer" WSJT-X?

OK - looks like I've no hardware "health" issues. Thanks! Bret/N4SRN - Original Message - From: "Don Wilhelm" To: "MaverickNH" , elecraft@mailman.qth.net Sent: Tuesday, July 4, 2017 7:55:30 AM Subject: Re: [Elecraft] [K3S] "Hardware Sequencer" WSJT-X? Bret, If you are running w

Re: [Elecraft] [K3S] K3S High SWR Shutdown on FT8?

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http

Re: [Elecraft] KPA500/KAT500 & K3S 2nd Subreceiver Diversity

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http

[Elecraft] KAT500

Any news? Charles - M0BIN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help

Re: [Elecraft] KAT-500

On 03/28/2012 07:01 AM, Gary Gregory wrote: > *Um, what happened to the KAT-500? > > guess with all the excitement with the KX3 nobody left to finish the > ATU...:-( > > Sigh. > > Gary > * When will it

Re: [Elecraft] KPA500 and KAT500 Ports

t closer to release. Unfortunately there is a small degree of ambiguity. Some readers may be keen to interpret "more" as meaning more inputs/outputs. I hope the reality is that we all know what you meant :-) Charles - M0BIN __

[Elecraft] Test

Excuse the bandwidth, but I have recently sent messages to the reflector and not seen them appear on the list. 73 from Charles - M0BIN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] Test again :-)

I am sending this again - as a further test. Excuse the bandwidth, but I have recently sent messages to the reflector and not seen them appear on the list. 73 from Charles - M0BIN __ Elecraft mailing list Home: http://mailman.qth.net

Re: [Elecraft] Test

On 17/07/11 18:53, Don Wilhelm wrote: > Charles, > > If you see this response but not your own --- > > There is an option on your subscription profile to not receive your own > messages - "Receive your own posts to the list?". If you set that to > No, you will

Re: [Elecraft] Test again :-)

On 17/07/11 22:12, Sam Morgan wrote: > how are you sending the email? > from the gmail account web page? > > from an email program on your computer? > (if so which email client?) Sending via Thunderbird. 73 from

Re: [Elecraft] Just joined this list - 5B4AZ

ater after I finish some upgrade work on some of my Ham radio Linux software > (upgrading from OSS to ALSA sound API). I beleive I will need 32-bit > compatibility for Skype also. Why not install a 32 bit distro? Charles - M0BIN _

[Elecraft] Failure to connect with Elecraft server

Error message: Unable to connect to Elecraft server. Error: 127 Can someone please tell me why this should happen? Charles - M0BIN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] Failure to connect with Elecraft server

get the latest update installed for the KPA. Thanks again for your advice. 73 from Charles - M0BIN On 8 November 2011 01:52, Ian Kahn wrote: > ** > Charles, > > What OS are you using? I run Ubuntu Linux v11.04 and had to install > cURL from my repository. It sounds like you ne

Re: [Elecraft] Failure to connect with Elecraft server

Many thanks Nate - I now have the three utilities running:-) Thanks to you curl is now installed and Ario is deleted. With the KPA Utility running I now get the message that the KPA is not responding, I have checked the menu and all appears to be OK. 73 from Charles - M0BIN * On 2011 08 Nov

Re: [Elecraft] Failure to connect with Elecraft server

ot echo "D" Remove KPA power and retry firmware load KPA programming failed. Remove power and re-try the firmware load. KPA firmware load failed I have checked the menu on the KPA and cannot see what needs to be changed. Thanks for your offer of help. 73 from Charles - M0BIN On 8 Nove

Re: [Elecraft] Failure to connect with Elecraft server

e the firmware. The alternative is to take the advice of Fred Cady on page 247 of his excellent manual. Many thanks once again for your valuable help Don. 73 from Charles - M0BIN On 8 November 2011 20:07, Don Wilhelm wrote: > If you must operate with a laptop, may I suggest you look around (

Re: [Elecraft] [K-Line] The size of things to come...

remote version in the future. > > Some of the competing products we evaluated had serious RFI or > component-rating deficiencies that caused them to fail in our test > suite. That won't happen with the KAT500. > So, will we have the opportunity to buy a KAT500 before t

Re: [Elecraft] [KX2] WSJT-X & Win10 Volume Mixer

. Best regards, Bret aka Charles Jessee N4SRN -- Original Message -- From: Jim Rhodes To: Charles Jessee Cc: elecraft@mailman.qth.net Sent: June 14, 2019 at 11:06 AM Subject: Re: [Elecraft] [KX2] WSJT-X&Win10 Volume Mixer What is the power level set at? The level controls and

Re: [Elecraft] [KX2] WSJT-X & Win10 Volume Mixer

aka Charles Jessee N4SRN -- Original Message -- From: Don Wilhelm To: Charles Jessee, elecraft@mailman.qth.net Sent: June 14, 2019 at 11:20 AM Subject: Re: [Elecraft] [KX2] WSJT-X&Win10 Volume Mixer Bret, I am confused by the first and second sentences of your post. In the f

Re: [Elecraft] [KX2] WSJT-X & Win10 Volume Mixer

restored! Best regards, Bret aka Charles Jessee N4SRN -- Original Message -- From: Don Wilhelm To:CharlesJessee, elecraft@mailman.qth.net Sent: June 14, 2019 at 11:46 AM Subject: Re: [Elecraft] [KX2] WSJT-X&Win10 Volume Mixer Bret (AKA Charles), Back down the computer level cont

[Elecraft] KPA-1500 ATU operation

After saving my KPA-1500 ATU impedance matching parameters on 80M at 20 Kc intervals (3.510, 3.530, 3.550, 3.570, etc, etc), I expected that the KPA-1500 ATU would automatically switch to the next set of L/C values at the midpoint of the 20 Kc segments (like 3.520, 3.540, 3.560, etc, etc), but

[Elecraft] KPA-1500 ATU operation

I should have checked for a new manual since the manual that came with my KPA-1500 has 20 Kc bins which I see are now 10 Kc bins. In addition, the tuning frequencies have been changed to 10 Kc increments. I think that is why I was getting unexplained results from the tuner as I tuned across t

[Elecraft] KPA-1500 ATU operation

Thanks to Dick for the detailed explanation of the tuner. I didn't know about the 8 Kc resolution limitation of the tuner. Even with plus or minus 8 Kc I should still be with a segment or two of the actual frequency, so I should be lower than 1.5:1 SWR. Thanks everyone. Charles

Re: [Elecraft] AF-1 Rev A - J2 AF Out Looks Different?

Hi Ron, Now that I look, I guess the PCB change has the same circuit once I solder the jumper. Thanks for the keen eyes! 73, BRET/KC1CJN - Original Message - From: "Ron D'Eau Claire" To: "MaverickNH" , elecraft@mailman.qth.net Sent: Saturday, June 11, 2016 12:50:29 PM Subject: R

Re: [Elecraft] KX2 - Option Pre-Installed?

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: htt

Re: [Elecraft] New K3S/P3 Set Up - The Essentials?

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: htt

Re: [Elecraft] P3 - Center/Top Spectrum Frequency Stays Zero?

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: htt

Re: [Elecraft] KX2 KXUSB Cable

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: htt

Re: [Elecraft] WSJT-X and K3S Tx

Hi Don - I'm running on a K3S rather than a KX3 so working with the internal sound card.. I switched to DATA Mode and Data A but WSPR-2 shows no Rx, there is no signal apparent on the waterfall. BRET - Original Message - From: "Don Wilhelm" To: "MaverickNH" , elecraft@mailman.qth

[Elecraft] KPA-1500 Pure Signal Output

Does anyone know if the RF coupler output in the KPA-1500 is functional yet? Charles K5UA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] Question on K3S and Winlink Express

Thanks Lyn - just joined up on Slack and will check in soon. Day job getting in the way of my hobbies again! Best regards, Bret aka Charles Jessee N4SRN -- Original Message -- Brett - I'm not Bob ... but I might be able to help with your Winlink issues. I am quite active o

Re: [Elecraft] K3S - Set Mode Across All Bands?

OK - thanks! Bret -Original Message- From: donw...@embarqmail.com To: cbjesse...@comcast.net, elecraft@mailman.qth.net Sent: 2020-12-28 11:49:24 AM Subject: Re: [Elecraft] K3S - Set Mode Across All Bands? Bret, No way that I know of, Mode is a per band setting. 73, Don W3FPR On

[Elecraft] Remote Elecraft tranceivers

I am one of many amateurs who have been using the K3-K3/0 mini-Remote Rig setups. Having moved around the country several times in the past few years I have maintained my station on a relative's farm for several years, and find that the above equipment works flawlessly on RTTY FSK, CW, and audi

Re: [Elecraft] To: Elecraft- Suggestions

On Monday 02 March 2009 14:57:08 -.-. --.-N3TU -.-. --.- wrote: > Is it possible to have the radio go down to .100 khz instead of where > it is now which is 500 khz? I second this request. Charles - M0BIN __ Elecraft mailing lis

[Elecraft] K3 836 noTX

ERR TXF error message received when attempting low power calibration. No power out on CW or SSB. I have studied the trouble shooting pages in the Owner's manual but cannot find the answer. Any suggestions please? Charles - M0BIN ___ Elecraft ma

[Elecraft] K3 836 noTX

ERR TXF error message received when attempting low power calibration. No power out on CW or SSB. I have studied the trouble shooting pages in the Owner's manual but cannot find the answer. Any suggestions please? Charles - M0BIN Sorry I should have stated that firmware revisions are:

Re: [Elecraft] K3 836 noTX

t 6 months! HI HI Thanks Larry, the TX filter for CW and SSB is set as 2.7 KHz. I also have the error code ERR TXG when attempting to set transmitter gain. Charles ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to

[Elecraft] Re: K3 836 - no TX

On Thursday 08 May 2008 21:05:59 you wrote: > OK Charles. Somewhere along the TX signal path is where the problem is. > The RF voltage tests I sent in that document should help narrow down where > it is. How can this be done without the detailed circuit diagram ? If a fault were found

Re: [Elecraft] K3 836 noTX

On Thursday 08 May 2008 12:24:22 Ian J Maude wrote: > Make sure you are in band Thanks Ian - I am definitely in band. Charles ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber I

Re: [Elecraft] K3 836 noTX

ted comments on the quality of the tone. It is a fine little rig that gives me great pleasure. I consider the the five month wait for the K3 has been well worthwhile but now I am faced with disappointment and worry as to how this issue is going to be resolved. Charles Rodgers - M0BIN ___

Re: [Elecraft] K3 836 noTX

this item on the Elecraft web site. Charles - M0BIN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] K3 836 noTX

yet seen the K3 move the needle on the Bird dial :-) I have the KAT3 ATU and when tapping ATU TUNE 5watts appears on the K£ RF watt meter but there is no movement on the Bird needle. I have the KPA3 but I presume that there is no point in installing it until thie problem is reso

Re: [Elecraft] K3 836 noTX

On Thursday 08 May 2008 12:38:18 Alexandr Kobranov wrote: > check TX filter for SSB/CW in config. Setting is must for TX. Thanks Alexa - see my reply to Larry Charles ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscri

[Elecraft] K3 with Yaesu FL-7000 Linear Amplifier

I would be pleased to know if anyone is using the K3 with the Yaesu FL-7000 Linear Amplifier and how well they work together. TIA from Charles M0BIN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the

Re: [Elecraft] K3 with Yaesu FL-7000 Linear Amplifier

On Friday 23 May 2008 15:08:02 Raj Dewan, N2RD wrote: > I am using it and they work together well. I have auto band > switching. Very easy to do. > Raj, N2Rd Thanks for the info Raj. Do you use QSK CW ? What connections do you have between the K3 and the FL-7000 ? Charles - M0BIN &g

Re: [Elecraft] K3 with Yaesu FL-7000 Linear Amplifier

til the > negative ALC modification is available for the K3. Thanks for the info Joe - unfortunately I don't have the FAS-1-4R Charles - M0BIN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subsc

Re: [Elecraft] K3 with Yaesu FL-7000 Linear Amplifier

on the FL-7000. They should work very well together. > > 73, > >... Joe, W4TV OK Joe - Now I understand. I guess you're saying that I need to buy the two plugs and wire them up or can someone provide such a cable cable with those connections ? Many tha

Re: [Elecraft] K3 noise reduction

yway it's only one button press to turn it back on... > > 73, Stewart Rolfe, GW0ETF (K3/100 145) I have read the FAQ on NR. So I cannot understand why when I tap NR in CW mode I get the message N/A. I used to be able to use NR in CW mode. Charles - M0BIN __

Re: [Elecraft] K3 noise reduction

w to drive it properly :-) Perhaps the requirement for AGC to be on could be included in the NR paragraph in the FAQ ? (Belt and Braces) Many thanks and 73 from Charles - M0BIN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a

  1   2   3   4   5   6   7   8   9   10   >