Dave:
I've had a K3s without the subreceiver for years. When I pushed the
"Sub" button, "No Sub" appeared in the display just like you described.
A few months ago, I bought the subreceiver and installed it. When I
first turned the K3s on, the same "No sub" message appeared. I then
updated
As Rick said;
Go into config MENU KRX3, set it to BNC or ATU depending on how the rear
antenna coax is cabled, then exit the menu and cycle power.
Keith WE6R K3 / K4 Tech
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/lis
Check the menu setting? Not Inst?
73,
Rick nk7i
On 4/17/2024 8:39 PM, Robie Elms wrote:
Dave,
Mark sure you do not have the AUX antenna selected for your sub receiver.
Push and Hold the RX ANT button and change it from Main to AUX or vice
versa. This selection is band sensitive.
Robie AJ4F
Dave,
Mark sure you do not have the AUX antenna selected for your sub receiver.
Push and Hold the RX ANT button and change it from Main to AUX or vice
versa. This selection is band sensitive.
Robie AJ4F
On Wed, Apr 17, 2024 at 10:07 PM H D Barr wrote:
> My K3 (non-S) is equipped with the seco
My K3 (non-S) is equipped with the second rx, which I rarely use. After
infrequent use (got a K4) the sub rx seems to have stopped functioning;
no signal or noise can be heard from it. When the "Sub" button is
tapped, "No Sub" appears in the display. The main rx and tx functions
seem normal.
5 matches
Mail list logo
