Check the menu setting? Not Inst?
73,
Rick nk7i
On 4/17/2024 8:39 PM, Robie Elms wrote:
Dave,
Mark sure you do not have the AUX antenna selected for your sub receiver.
Push and Hold the RX ANT button and change it from Main to AUX or vice
versa. This selection is band sensitive.
Robie AJ4F
On Wed, Apr 17, 2024 at 10:07 PM H D Barr <hdb...@comcast.net> wrote:
My K3 (non-S) is equipped with the second rx, which I rarely use. After
infrequent use (got a K4) the sub rx seems to have stopped functioning;
no signal or noise can be heard from it. When the "Sub" button is
tapped, "No Sub" appears in the display. The main rx and tx functions
seem normal. Before I open up the K3 to see if any cables have come
loose, I am searching for more obvious (or easier to check) possible
reasons, including operator error. Any ideas are welcome.
Thanks and 73.
Dave, K2YG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rule...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rick.n...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
