On Sun, Aug 03, 2014 at 04:54:21PM +0200, Martin Kepplinger wrote:
> @@ -447,6 +457,13 @@ static uint8_t as102_fe_get_code_rate(fe_code_rate_t arg)
> static void as102_fe_copy_tune_parameters(struct as10x_tune_args *tune_args,
> struct dtv_frontend_properties *params)
> {
On Fri, 1 Aug 2014, Dexuan Cui wrote:
> With this patch, we can move the mouse to wake up the VM after the VM executes
> "echo freeze > /sys/power/state".
>
> This addresses part of https://bugzilla.redhat.com/show_bug.cgi?id=1086100
>
> Cc: K. Y. Srinivasan
> Signed-off-by: Dexuan Cui
Applie
remove dprintk() and replace it with dev_dbg() in order to
use the common kernel coding style.
Signed-off-by: Martin Kepplinger
---
Thanks Dan. And since it continues to succeed if (dev == NULL),
differntiate if (dev) or not.
drivers/staging/media/as102/as102_drv.c | 15 +++---
drivers/st
On thinking about it some more the proper way to redo this would have
been to remove the bogus check. Also a couple trivial things below.
On Mon, Aug 04, 2014 at 12:17:14PM +0200, Martin Kepplinger wrote:
> @@ -82,10 +83,17 @@ static int as102_fe_get_tune_settings(struct dvb_frontend
> *fe,
>
On 2014-08-01 20:50, H Hartley Sweeten wrote:
[snip]
diff --git a/drivers/staging/comedi/comedidev.h
b/drivers/staging/comedi/comedidev.h
index 58e58a3..73e5fd3 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -502,7 +502,7 @@ struct pci_driver;
struc
On 2014-07-31 21:28, Hartley Sweeten wrote:
On Thursday, July 31, 2014 6:48 AM, Ian Abbott wrote:
The "amplc_pci224" driver retains a "legacy" attach mechanism via the
`COMEDI_DEVCONFIG` ioctl and the comedi driver "attach" hook, but
usually attaches PCI devices automatically via the comedi driv
On Mon, 2014-08-04 at 13:40 +0300, Dan Carpenter wrote:
> On Mon, Aug 04, 2014 at 12:17:14PM +0200, Martin Kepplinger wrote:
[]
> > + if (dev) {
> > + dev_dbg(&dev->bus_adap.usb_dev->dev,
> > + "tuner parameters: freq: %d bw: 0x%02x gi: 0x%02x\n",
> > + par
remove dprintk() and replace it with dev_dbg() or pr_debug()
in order to use the common kernel coding style.
Signed-off-by: Martin Kepplinger
---
Thanks for looking at it. So this doesn't add anything and actually does
what it says. If I haven't understood what you meant, or if I should try
to ad
The `driver_data` member value from the matched entry of the PCI module
device table `amplc_pci224_pci_table[]` is passed through to our comedi
"auto_attach" handler, `pci224_auto_attach()`. Use that to index
directly into our static board data array `pci224_boards[]` instead of
calling `pci224_fi
On 2014-08-01 21:07, H Hartley Sweeten wrote:
This member of the boardinfor is only set for the PCIE boards. For
aeshetics, rename it to 'is_pcie'.
For clarity, use this flag in the (*auto_attach) to determine if the
dio200_pcie_board_setup() function needs to be called instead of using
the swit
On 2014-08-01 21:06, H Hartley Sweeten wrote:
Remove some cruft leftover from when this driver was a single module that
include support for both the ISA and PCI boards.
Do a bit of additional cleanup.
H Hartley Sweeten (13):
staging: comedi: amplc_dio200: remove private data
staging: come
On 2014-08-01 22:18, H Hartley Sweeten wrote:
The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.
Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (dioP2ExpansionIO8Bit)
On 07/31/2014 07:14 PM, DaeSeok Youn wrote:
Hi, Mark
2014-07-31 21:44 GMT+09:00 Mark Hounschell :
On 07/31/2014 12:02 AM, Daeseok Youn wrote:
When a configration file is parsed with dgap_parsefile(),
makes nodes for saving configrations for board.
Making a node will allocate node memory and
On 2014-08-01 22:18, H Hartley Sweeten wrote:
The drivers that use this module with memory mapped io all have the
ioremap'ed base address stored in the comedi_device 'mmio' member.
Modify subdev_8255_io() to handle the memory mapped io. This allows
removing the private callbacks from some of the
This patch set does some cleanup; no functional change.
Christoph Jaeger (10):
staging: ozwpan: Add module parameter description
staging: ozwpan: Fix typo in typedef
staging: ozwpan: Remove unused OZ_MAX_TIMER_POOL_SIZE
staging: ozwpan: Remove redundant initialization
staging: ozwpan: Re
Signed-off-by: Christoph Jaeger
---
drivers/staging/ozwpan/ozmain.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/ozwpan/ozmain.c b/drivers/staging/ozwpan/ozmain.c
index d1a5b7a..7d6ef4c 100644
--- a/drivers/staging/ozwpan/ozmain.c
+++ b/drivers/staging/oz
Signed-off-by: Christoph Jaeger
---
drivers/staging/ozwpan/ozproto.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/ozwpan/ozproto.h b/drivers/staging/ozwpan/ozproto.h
index cb38e02..378b737 100644
--- a/drivers/staging/ozwpan/ozproto.h
+++ b/drivers/stagi
Member 'ops' has already been initialized by calling cdev_init().
Signed-off-by: Christoph Jaeger
---
drivers/staging/ozwpan/ozcdev.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/staging/ozwpan/ozcdev.c b/drivers/staging/ozwpan/ozcdev.c
index 10c0a96..f82e12c 100644
--- a/drivers/s
Use a slab cache rather than rolling our own free list.
Signed-off-by: Christoph Jaeger
---
drivers/staging/ozwpan/ozhcd.c | 70 --
1 file changed, 12 insertions(+), 58 deletions(-)
diff --git a/drivers/staging/ozwpan/ozhcd.c b/drivers/staging/ozwpan/ozhc
Use a slab cache rather than rolling our own free list.
Signed-off-by: Christoph Jaeger
---
drivers/staging/ozwpan/ozpd.c| 43 +++-
drivers/staging/ozwpan/ozpd.h| 3 +--
drivers/staging/ozwpan/ozproto.c | 8
drivers/staging/ozwpan/ozproto.h
Use a slab cache rather than rolling our own free list.
Signed-off-by: Christoph Jaeger
---
drivers/staging/ozwpan/ozeltbuf.c | 70 +++
drivers/staging/ozwpan/ozeltbuf.h | 5 ---
drivers/staging/ozwpan/ozpd.c | 2 --
drivers/staging/ozwpan/ozpd.h |
OZ_MAX_TIMER_POOL_SIZE is not used anywhere; remove it.
Signed-off-by: Christoph Jaeger
---
drivers/staging/ozwpan/ozproto.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/staging/ozwpan/ozproto.c b/drivers/staging/ozwpan/ozproto.c
index 1102055..4aebe16 100644
--- a/drivers/stagin
No need to return a value from elt_buf_init().
Signed-off-by: Christoph Jaeger
---
drivers/staging/ozwpan/ozeltbuf.c | 3 +--
drivers/staging/ozwpan/ozeltbuf.h | 2 +-
drivers/staging/ozwpan/ozpd.c | 5 +
3 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/ozwp
Simplify the somewhat overcomplicated application interface; improves
readability and saves a bunch of lines.
Use designated struct initializers for clarity.
Signed-off-by: Christoph Jaeger
---
drivers/staging/ozwpan/ozcdev.c | 30 +++
drivers/staging/ozwpan/ozpd.c | 151
Make use of the various list helper functions to improve readability.
Signed-off-by: Christoph Jaeger
---
drivers/staging/ozwpan/ozeltbuf.c | 60 +++--
drivers/staging/ozwpan/ozhcd.c| 96 +++---
drivers/staging/ozwpan/ozpd.c | 106 +++
On 2014-08-01 22:18, H Hartley Sweeten wrote:
This driver currently duplicates the functionality of the 8255 module.
The only difference is in how the i/o access is handled.
Provide a private (*io) callback for the 8255 module to handle the
differences. We can then use that module and initialize
On 2014-08-01 22:18, H Hartley Sweeten wrote:
Now that the comedi_device has a 'mmio' and a 'iobase' member, this module
can detect if the (*io) operations need to use readb/writeb for memory mapped
I/O or inb/outb for port I/O. This can be use to cleanup a lot of the code
duplication in the driv
On Monday, August 04, 2014 3:49 AM. Ian Abbott wrote:
> On 2014-08-01 20:50, H Hartley Sweeten wrote:
> [snip]
>> diff --git a/drivers/staging/comedi/comedidev.h
>> b/drivers/staging/comedi/comedidev.h
>> index 58e58a3..73e5fd3 100644
>> --- a/drivers/staging/comedi/comedidev.h
>> +++ b/drivers/st
On Monday, August 04, 2014 4:14 AM, Ian Abbott wrote:
> The `driver_data` member value from the matched entry of the PCI module
> device table `amplc_pci224_pci_table[]` is passed through to our comedi
> "auto_attach" handler, `pci224_auto_attach()`. Use that to index
> directly into our static bo
On Monday, August 04, 2014 6:05 AM, Ian Abbott wrote:
> On 2014-08-01 22:18, H Hartley Sweeten wrote:
>> This driver currently duplicates the functionality of the 8255 module.
>> The only difference is in how the i/o access is handled.
>>
>> Provide a private (*io) callback for the 8255 module to h
On Monday, August 04, 2014 5:53 AM, Ian Abbott wrote:
> On 2014-08-01 22:18, H Hartley Sweeten wrote:
>> The drivers that use this module with memory mapped io all have the
>> ioremap'ed base address stored in the comedi_device 'mmio' member.
>>
>> Modify subdev_8255_io() to handle the memory mappe
On Monday, August 04, 2014 3:49 AM, Ian Abbott [mailto:abbo...@mev.co.uk] wrote:
>> diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c
>> b/drivers/staging/comedi/drivers/addi_apci_2032.c
>> index be0a8a7..d35998d 100644
>> --- a/drivers/staging/comedi/drivers/addi_apci_2032.c
>> +++ b/d
When the buffer is too small for a packet from VMBus, a bigger buffer will be
allocated in netvsc_channel_cb() and retry reading the packet from VMBus.
Increasing this buffer size will reduce the retry overhead.
Signed-off-by: Haiyang Zhang
Reviewed-by: Dexuan Cui
---
drivers/net/hyperv/hyperv_
On 04/08/14 17:53, Hartley Sweeten wrote:
On Monday, August 04, 2014 6:05 AM, Ian Abbott wrote:
On 2014-08-01 22:18, H Hartley Sweeten wrote:
This driver currently duplicates the functionality of the 8255 module.
The only difference is in how the i/o access is handled.
Provide a private (*io)
On 04/08/14 18:27, Hartley Sweeten wrote:
On Monday, August 04, 2014 3:49 AM, Ian Abbott [mailto:abbo...@mev.co.uk] wrote:
diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c
b/drivers/staging/comedi/drivers/addi_apci_2032.c
index be0a8a7..d35998d 100644
--- a/drivers/staging/comedi/dr
Add missing blank lines after declaration.
Signed-off-by: Quentin Lambert
---
drivers/staging/imx-drm/imx-drm-core.c | 2 ++
drivers/staging/imx-drm/imx-tve.c | 2 ++
drivers/staging/imx-drm/parallel-display.c | 2 ++
3 files changed, 6 insertions(+)
diff --git a/drivers/staging/im
Add 2 missing blank lines after declaration.
Signed-off-by: Quentin Lambert
---
drivers/staging/slicoss/slicoss.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/staging/slicoss/slicoss.c
b/drivers/staging/slicoss/slicoss.c
index b6227fb..cbeac3e 100644
--- a/drivers/staging/slico
From: "K. Y. Srinivasan"
Date: Sat, 2 Aug 2014 10:42:02 -0700
> Intel did some benchmarking on our network throughput when Linux on Hyper-V
> is as used as a gateway. This fix gave us almost a 1 Gbps additional
> throughput
> on about 5Gbps base throughput we hadi, prior to increasing the sendb
From: Haiyang Zhang
Date: Mon, 4 Aug 2014 12:33:45 -0700
> When the buffer is too small for a packet from VMBus, a bigger buffer will be
> allocated in netvsc_channel_cb() and retry reading the packet from VMBus.
> Increasing this buffer size will reduce the retry overhead.
>
> Signed-off-by: H
This is a patch to the rtl8188e_xmit.c file that fixes up a missing
blank line warning found by the checkpatch.pl tool.
Signed-off-by: Adrian Remonda
---
drivers/staging/rtl8188eu/hal/rtl8188e_xmit.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_xmit.
This is a patch to the hal/rtl8188eu_recv.c file that fixes up a "line
over 80 characters" warning found by the checkpatch.pl tool.
Signed-off-by: Adrian Remonda
---
drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c | 28 +-
1 file changed, 18 insertions(+), 10 deletions(-)
On Tue, 2014-08-05 at 00:45 +0200, Adrian Remonda wrote:
> This is a patch to the hal/rtl8188eu_recv.c file that fixes up a "line
> over 80 characters" warning found by the checkpatch.pl tool.
[]
> diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_recv.c
> b/drivers/staging/rtl8188eu/hal/rtl818
This member is set at the end of the driver attach and is only used to
verify that icp_multi_reset() can be called in the (*detach). The only
requirement for icp_multi_reset() to work is that the dev->mmio is valid.
Remove the 'valid' member from the private data and use 'dev->mmio' to
see if the
Factor the freeing of the dma buffers out of the (*detach).
Move the freeing of the buffers so that it occurs after the PCI device
has been disabled to avoid any race condition.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/gsc_hpdi.
For aesthetics, use comedi_pci_detach() instead of comedi_pci_disable().
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/adv_pci_dio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/ad
Currently the dma buffers are freed during the detach of the driver using
the function s626_close_dma_b(). The buffers are also freed while the
interrupt handler is still attached. This could result in a race condition.
Refactor the code so that the buffers are freed after the interrupt handler
is
This member is set at the end of the driver attach and is only used to
verify that pci_dio_reset() can be called in the (*detach). The only
requirement for pci_dio_reset() to work is that the dev->iobase is valid.
Remove the 'valid' member from the private data and use 'dev->iobase' to
see if the
Use comedi_pci_detach() to handle the boilerplate part of the (*detach)
for this PCI driver.
This also fixes a race condition where the interrupt handler is released
before the interrupts are disabled in the hardware.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
Use comedi_pci_detach() to handle the boilerplate (*detach) of this PCI
driver.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/amplc_dio200_pci.c | 11 +--
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/s
Use comedi_pci_detach() to handle the boilerplate part of the (*detach)
for this PCI driver.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/s626.c | 7 +--
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/stagin
Use comedi_pci_detach() to handle the boilerplate part of the (*detach)
for this PCI driver.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/daqboard2000.c | 10 +++---
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/d
Use comedi_pci_detach() to handle the boilerplate part of the (*detach)
for this PCI driver.
This also fixes a race condition where the interrupt handler is released
before the interrupts are disabled in the hardware.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
Use comedi_pci_detach() to handle the boilerplate part of the (*detach)
for this PCI driver.
Remove the unnecessary read/write of the PLC_INTRCS_REG. The rtd_reset()
function writes '0' to this register.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/stagin
Introduce a new helper function, comedi_pci_detach(), that can be used
as the (*detach) of a comedi PCI driver to handle the boilerplate code
of the PCI driver detach.
Use the the new helper to remove the boilerplate from most of the comedi
PCI drivers.
The jr3_pci and mite drivers (ni_660x, ni_p
Introduce a generic (*detach) function for comedi PCI drivers to handle
the boilerplate code needed to detach a PCI driver.
This function works similar to comedi_legacy_detach() where it will:
* free the dev->irq if it has been requested
* iounmap the dev->mmio addres if it has been ioremap'e
This exported function only does a free_irq() for the dio200 legacy and
PCI drivers. The ISA driver also calls comedi_legacy_detach() which
would also do the free_irq().
Remove the exported function and use comedi_legacy_detach() directly
in the legacy driver for the (*detach).
Add the free_irq()
Use comedi_pci_detach() to handle the boilerplate part of the (*detach)
for this PCI driver.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/icp_multi.c | 6 +-
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/st
Factor the freeing of the dma buffers out of the (*detach).
Move the freeing of the buffers so that it occurs after the PCI device
has been disabled to avoid any race condition.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/cb_pcidas
This driver does not use interrupts so it does not need to free_irq()
during the (*detach).
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/daqboard2000.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/staging/comedi/drive
> -Original Message-
> From: David Miller [mailto:da...@davemloft.net]
> Sent: Monday, August 4, 2014 6:09 PM
> To: Haiyang Zhang
> Cc: net...@vger.kernel.org; KY Srinivasan; o...@aepfle.de;
> jasow...@redhat.com; linux-ker...@vger.kernel.org; driverdev-
> de...@linuxdriverproject.org
> S
Hi, Mark and Greg.
Thanks for testing. :-)
Greg, is this patch possible to merge to your staging tree?
Please check for me.
patch : https://lkml.org/lkml/2014/7/31/2
Thanks.
regards,
Daeseok Youn.
2014-08-04 21:40 GMT+09:00 Mark Hounschell :
> On 07/31/2014 07:14 PM, DaeSeok Youn wrote:
>>
>>
On Tue, Aug 05, 2014 at 08:33:16AM +0900, DaeSeok Youn wrote:
> Hi, Mark and Greg.
>
> Thanks for testing. :-)
>
> Greg, is this patch possible to merge to your staging tree?
> Please check for me.
> patch : https://lkml.org/lkml/2014/7/31/2
It's the middle of the merge window, I can't do anythi
2014-08-05 8:38 GMT+09:00 Greg KH :
> On Tue, Aug 05, 2014 at 08:33:16AM +0900, DaeSeok Youn wrote:
>> Hi, Mark and Greg.
>>
>> Thanks for testing. :-)
>>
>> Greg, is this patch possible to merge to your staging tree?
>> Please check for me.
>> patch : https://lkml.org/lkml/2014/7/31/2
>
> It's the
This patch adds missing blank line between declarations and code,
satisfying checkpatch.pl.
Signed-off-by: Murilo Opsfelder Araujo
---
drivers/staging/iio/accel/adis16204_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/iio/accel/adis16204_core.c
b/drivers/staging/iio/
This patch adds missing blank lines between declarations and code,
satisfying checkpatch.pl.
Signed-off-by: Murilo Opsfelder Araujo
---
drivers/staging/iio/accel/adis16203_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/staging/iio/accel/adis16203_core.c
b/drivers/staging/i
The following patches fix almost all warnings reported by
checkpatch.pl.
Changes from v1:
- Updated commit messages to better reflect changes.
Murilo Opsfelder Araujo (8):
staging: iio: accel: adis16203_core.c: Add blank lines between
declarations and code
staging: iio: accel: adis16201_c
This patch adds missing blank line between declarations and code,
satisfying checkpatch.pl.
Signed-off-by: Murilo Opsfelder Araujo
---
drivers/staging/iio/accel/adis16240_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/iio/accel/adis16240_core.c
b/drivers/staging/iio/
This patch adds missing blank line between declarations and code,
satisfying checkpatch.pl.
Signed-off-by: Murilo Opsfelder Araujo
---
drivers/staging/iio/accel/lis3l02dq_core.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c
b/drivers/staging/
This patch adds missing blank line between declarations and code,
satisfying checkpatch.pl.
Signed-off-by: Murilo Opsfelder Araujo
---
drivers/staging/iio/accel/adis16209_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/iio/accel/adis16209_core.c
b/drivers/staging/iio/
This patch adds missing blank line between declarations and code,
satisfying checkpatch.pl.
Signed-off-by: Murilo Opsfelder Araujo
---
drivers/staging/iio/accel/lis3l02dq_ring.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c
b/drivers/staging/iio/
This patch adds missing blank line between declarations and code, and
also fixes lines starting by space, satisfying checkpatch.pl.
Signed-off-by: Murilo Opsfelder Araujo
---
drivers/staging/iio/accel/adis16201_core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drive
This patch adds missing blank line between declarations and code, and
ajust code to fit 80-chars limit.
Signed-off-by: Murilo Opsfelder Araujo
---
drivers/staging/iio/accel/sca3000_core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/iio/accel/sca3000_cor
On Mon, 2014-08-04 at 22:47 -0300, Murilo Opsfelder Araujo wrote:
> This patch adds missing blank line between declarations and code, and
> adjust code to fit 80-chars limit.
[]
> diff --git a/drivers/staging/iio/accel/sca3000_core.c
> b/drivers/staging/iio/accel/sca3000_core.c
[]
> @@ -506,7 +506
> Lots of things in here, over 2000 patches, but the best part is this:
> 1480 files changed, 39070 insertions(+), 254659 deletions(-)
>
> Thanks to the great work of Kristina Martšenko, 14 different staging
> drivers have been removed from the tree as they were obsolete and no
> one
> was willing
On Tue, Aug 05, 2014 at 06:13:25AM +0200, Andreas Mohr wrote:
> > Lots of things in here, over 2000 patches, but the best part is this:
> > 1480 files changed, 39070 insertions(+), 254659 deletions(-)
> >
> > Thanks to the great work of Kristina Martšenko, 14 different staging
> > drivers have bee
75 matches
Mail list logo
