ptest dovecot: imap(chris): delete:
box=MailingListen/test125, uid=180,
msgid=<740a9ba3-d637-3fa0-1b87-ff8d79491bf0@ hyp.postbox.xyz>,
size=1509 Oct 2 10:18:03 hyptest dovecot: imap(chris): expunge:
box=MailingListen/test125, uid=167,
msgid=<740a9ba3-d637-3fa0-1b87-ff8d79491bf0 @hyp.postbox.x
s sending close:
::1.38247-::1.00143: MALP9 CLOSE
::1.00143-::1.38247: MALP9 OK Close completed.
::1.38247-::1.00143: MALP10 LOGOUT
::1.00143-::1.38247: * BYE Logging out
MALP10 OK Logout completed.
- Chris
extract below, this has already been reported a while back but still
no new patch, so this email is to serve as a reminder, if someone
manually fixes it for the ports tree, I dont consider that a fix,
ideally we need this fixed in the source code, as not everyone will
install it from ports.
Chris
The url http://www.dovecot.org/doc/NEWS has not been updated for a
while, I suggest either killing it or updating it again.
Chris
All,
I'm using Maildir. Is it possible to move all (or only some) maildirs with
softlinks to another partition?
- Chris
Steffen Kaiser wrote:
> On Wed, 28 Sep 2016, Chris wrote:
>> I'm using Maildir. Is it possible to move all (or only some) maildirs
>> with
>> softlinks to another partition?
>
> I did this, but be prepared that you have left-overs when the user deletes
> the ma
sort through hundreds of duplicated emails?
Chris
course the pop email accounts still had the duplicates I have had to
advise the user to clean out there email folders and apologised for the
inconvenience.
Chris
On 22/08/2015 5:42 PM, chris wrote:
Hi
I am trying to migrate from a Centos dovecot 1.0.7 install to a debian
dovecot 2.1.7
Hi Daniel,
> in doveadm_set_mailbox_acls() and imap_set_mailbox_acls() the attributes
> are read and used to set them on the folders.
thank you. That's interesting. They're calling doveadm directly. I
probably would have tried to use an IMAP-Client library. The former seems
easier.
- Chris
do you use for user management and ACLs?
Is there any way to extend permissions? Are there any scripts available
that set permissions or grant them when logging in?
- Chris
Hugh Bragg wrote:
> I've been trying this for weeks and never managed to get my mail client
> to see shared folders.
> Apparently imap_acl works fine as I can see these entries in the
> dovecot-acl-list files and the correct entries persist in the client.
> This is my first dovecot setup so I hope
l if it is defined in global ACLs?
For Cyrus there are perl modules which have the same functions as cyradm.
Is there something like this for dovecot? Are there any modules available?
Haven't found anything in CPAN.
- Chris
nly, that users can still delete
mails.
Thank you in advance.
- Chris
Dear All,
I'd like dovecot-lda (deliver) to post a message to a public mailbox.
It doesn't seem to work when I just use the -m parameter with the
IMAP-Mailbox path, e.g. Public/info .
What parameters are required? Do I have to change the headers with formail
in any way?
TIA!
- Chris
ailboxes/%{ldap:sAMAccountName}/Maildir, \
> =mail=maildir:/home/mailboxes/%{ldap:sAMAccountName}/Maildir
>
> in the dovecot-ldap.conf.ext, but it seems to ignore them...
Have you tried override_fields?
- Chris
All,
I've to set ACLs in public namespace for more than 5000 folders. That
takes some hours. I'm calling doveadm by a perl script. Is there any way
to speedup doveadm? Is it possible to set ACLs for multiple folders or
users in a single call?
- Chris
===
> 2 .Entw&-APw-rfe
> 9 .Entw&,,0-rfe
> 91 .Entw&APw-rfe
>
Use something like "Entwuerfe" and not "Entwürfe".
--
Chris
2012/2/18 Luigi Rosa :
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Ralf Hildebrandt said the following on 18/02/12 20:04:
>
>> I'm not sure which program insists on creating "Entwürfe"
>
>
> Outlook? ;)
Yes... M$ Outlook crap do this :)
--
Chris
2012/2/18 René Neumann :
> Am 18.02.2012 19:59, schrieb Chris:
>> Use something like "Entwuerfe" and not "Entwürfe".
>
> Come on ... software having problems with non-ASCII-stuff in 2012 is
> just broken by design. Hence there should be no reason to use
gt; ...but when looking at the subscription file AFTER the removal, that file
> contained an empty line. I don't think that's correct.
Is that fixed?
--
Chris
had bugged
You are using packages compiled against debian sources under ubuntu???
--
Chris
2012/4/25 Robert Schetterer :
> Am 25.04.2012 16:47, schrieb Chris:
>> 2012/4/25 Robert Schetterer :
>>>> That's totally broken.. You sure you recompiled Pigeonhole correctly
>>>> against the same Dovecot version?
>>>>
>>>
>>>
2012/7/19 Ralf Hildebrandt :
> Right now we're migrating mailboxes from dovecot -> Exchange, and
> Exchange cannot handle leading and trailing spaces in Folder names.
You're migrating to M$ exchange??? :o
--
Chris
icrosoft are paid for their "products" thousands of dollars?
>
> Does it make sense?
Do you think Ralf is migrating just for fun to M$ exchange? Ralf is
certainly no friend of M$ software.
I think he's freaked out when he heard about it.
--
Chris
On Sep 15, 2010, at 10:07 AM, Jerry wrote:
>
> Out of morbid curiosity, why do you feel the need to convert the user
> names to lower case?
>
Because %L in a config file is better than a user on the phone?
If there are no upper-case letters in user names, there is no reason a login
should fa
ceive them in /var/vmail/%d/%n/Maildir
But the login works fine (pop and imap).
How can I figure out, why there are no mails comming?
Thank you
Bye, Chris
dovecot --version
1.0.15
dovecot -n
# 1.0.15: /etc/dovecot/dovecot.conf
base_dir: /var/run/dovecot/
log_path: /var/log/dovecot.log
info_log_path:
ou in advance
Bye, Chris
Am 05.10.2010 11:59, schrieb Chris:
Hello everyone,
I installed postfix and dovecot (imap + pop) on a debian server.
I can send emails via postfix and I could receive emails via dovecot
before. Yesterday my server got shutdown and restarted and since then, I
somehow have
Dovecot is able to create the other directories after the main home
folder is created, it might be having issues creating the parent directories
On 09/03/2013 10:49 AM, Chris Lasater wrote:
Hi,
I have just set up a new dovecot server with Dovecot 2.2.5. When I
create a new user and try to
Hi,
login_log_format_elements does not seem to change the login logs. I
have it set to the below setting and the word "home" does not even
appear. Is there something I have to do to for this? Also I use ldap
for authentication.
[user@MB1 logs]$ doveconf -n | grep -i log
debug_log_path = /h
I upgraded to 2.2.6 yesterday and was one 2.2.5 before.
On 09/26/2013 07:06 PM, Daniel Parthey wrote:
Hi,
this bug should have been fixed by Timo in some 2.1.x release. The
issue should be in the list archives too. Which version are you using?
BTW: I'm still using
doveadm -c /etc/dovecot-dir
= continue
result_internalfail = continue
result_success = return-ok
}
from [1].
The error message is:
Jan 25 14:02:03 post1 dovecot: lda(chris): Error: user chris:
Initialization failed: Namespace '': stat(/home/vmail/chris/Maildir)
failed: Permission denied (euid=1000(chris) egid=1000(chris) missing
Sorry, there's another issue with this configuration, not in the part I
quoted. Please ignore this thread. If there are further questions, I'll
ask again.
- Chris
On 01/25/2014 05:28 PM, Chris wrote:
> Dear All,
>
> I'm using version 2.1.7 which currently ships with debi
Dear All,
can I expose Dovecot's Manage Sieve port to the internet or should I
restrict access (e.g. by IP address or VPN)?
--
Christian
tions? I’ve built it locally (via ports), so if
there are compiler options I can/should try, I certainly can try.
Thanks…
- Chris
gdb on auth (from build dir, compiled -g -O2) shows something similar.
- Chris
# gdb work/dovecot-2.2.33.2/src/auth/.libs/auth
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to
0004022a380 in ?? ()
(gdb)
Cannot find bounds of current function
(gdb)
Next step I’ll stop before that and be more careful about n’ing things, but.
Just passing on context while I have it.
Thanks. More later.
- Chris
> On Feb 22, 2018, at 02:25, Aki Tuomi
might be running in another process.
Further execution is probably impossible.
0x4022a380 in ?? ()
(gdb)
Any ideas here? I’m not sure where to look next…
- Chris
> On Feb 22, 2018, at 10:10, Chris Ross wrote:
>
> Fancy, while not fun. :-) But thanks, tha
something wrong with running
in gdb? I notice this is a SIGTRAP, where the binary when run out of gdb gets
a SIGSEGV, and that’s what a loaded core shows.
Thanks for any assistance.
- Chris
Breakpoint 3, master_service_exec_config (service=0x4103,
input=0x7fdf5a8) at
the alignment
> requirement before doing a quick sanity check and generating SIGSEGV to
> begin with, but that's my theory based on the info available so far.
> Hopefully, a stack trace from a core file will help.
Unfortunately it seems not to have. But, good catch on the pointer value
there
being ASCII data. Let me know if you have any other ideas.
- Chris
wrong here?
Thanks.
- Chris
wrong here?
Thanks.
- Chris
working before
things stopped for other reasons last month. I think I may’ve overlooked
something in my hand-coded replacement for libc functionality. I’m testing
that now.
[time goes by]
Yup. My error. Sorry for the noise on the list, it’s running now.
- Chris
d be greatly appreciated. Please let me know if you
need any more details regarding the replication steps, though I hope
that I didn't miss anything.
Thank you!
--
Chris Dillon
Technical Analyst III
Migrations Specialist
cPanel, Inc.
smime.p7s
Description: S/MIME Cryptographic Signature
error that I have not yet attempted to resolve, but I used
an internal binary build of 2.3.2 which has a few (though probably not
affecting this particular issue) patches applied to it.
--
Chris Dillon
Technical Analyst III
Migrations Specialist
cPanel, Inc.
Register Now for cPanel Conference
I’ve had the opportunity to test the same configuration with a fresh build of
the git master branch (2.4.devel) and the issue also occurs there. I see that
"mailbox_list_index = yes" is now enabled by default. It can still be disabled
via "mailbox_list_index = no" which allows the quota to be
#x27;t appear to be just me. I've also selectively edited the above
to avoid leaking data.
We're running on the following
# 2.2.34 (874deae): /etc/dovecot/dovecot.conf
# Pigeonhole version 0.4.22 (22940fb7)
# OS: Linux 4.9.0-7-amd64 x86_64 Debian 9.5 ext4
If you need a full copy of the config, please let me know and I'll talk
to my client, however, I don't think this is config related.
Thanks in advance.
Regards,
Chris Malton
--
Delta V Technologies Limited
0 402 402www.deltav-tech.co.uk
Office: 17 Elm Close, Southampton, SO16 7DT
Company No. 11006104 Registered in England and Wales
Thanks Aki,
We'll see if we can backport this internally to the version we're
currently running as a temporary fix until we can do a proper upgrade.
Regards,
Chris
On 19/09/18 07:57, Aki Tuomi wrote:
Yeah. This is a bug, there is a fix pendi
upstream or it is in upstream
already, but not up to date? Other reasons?
Just curiosity, as I'll be in similar position soon, trying to
maintain own package.
Best regards,
Chris Narkiewicz
December 2018 at 16:42 cpblpublic+dove...@gmail.com wrote:
> >
> >
> > Hi Aki,
> >
> > Thanks. I put that in the .conf file I mentioned, and it made no
> > difference.
> >
> > Chris
> >
> > > Hi!
> > >
> > > In
in as meuser
Thanks!
Chris
On Mon, Dec 31, 2018 at 10:27 AM Aki Tuomi wrote:
Did you remove the service section before taking doveconf -n? 'cos I
can't see it here..
Also, did you restart dovecot after config change?
Aki
> On 31 December 2018 at 1
dovecot
would be using a different .conf file, so I was hoping I just had to know
how to make my custom one (-c flag) work.
Thanks,
Chris
On Mon, 31 Dec 2018, Aki Tuomi wrote:
> Am I assuming correctly that you are not, in fact, running anything but imap
> process from Dovecot?
>
>
know what to do without asking a lead developer?
Thank you very much.
I hope you had a great start to the New Year!
Happy 2019,
Chris
On Mon, 31 Dec 2018, Aki Tuomi wrote:
> If your client directly executes imap binary, it is not mandatory for dovecot
> to be running, but you need to p
? The second
(askubuntu.com) link you give is my own question (and answer, based on Aki
Tuomi's earlier responses).
Thanks and best wishes,
Chris
On Sun, 6 Jan 2019, Stephan Bosch wrote:
>
> Op 31/12/2018 om 16:53 schreef Chris Barrington-Leigh:
> > I then followed the instr
Hit a little problem when I upgraded a system from FreeBSD 10.3 to 11.2. I did
not receive any errors in the upgrade. The system is running 4 jails and
everything seems to work except in Dovecot dovecot-2.3.4_5 where when using the
exact same configuration which worked in 10.3 with the same pass
I had to move off of a server to this one too fast.
Having problems
If this goes through, if someone could reply to
ch...@bennettconstruction.us instead of on-list.
Thanks,
Chris Bennett
I've got a mix of some receive only, some send only.
I tried to slam together two different configs really fast.
This helped.
I'll look things over and post some configs after a bit.
Thanks again!
Chris Bennett
I'm having some problems. I'm using virtual users with real domains.
That is working, but the folders are not showing up properly in neomutt,
for both virtual users and system users.
When I use K9 on Android, the folders show up correctly.
Sending is working, but I don't have auth setup right on O
do to guess what
> the right answer is.
> --
> Olivier
>
>
Some projects just can't get around the lack of compliance from vendors,
whether it's from incompetence or their not needing/desiring to do it.
Several years ago, I wanted to move lpd forward.
After weeks of looking at the hardware with non-compliance, I finally
just had to drop the project because it was truly a vast and
hopeless situation.
It was an excellent, but frustrating lesson.
I wish you luck, but you might be in the same spot I found myself.
Chris Bennett
adding the old mail from system user home Maildir folders to the virtual
users folders I'm using?
Thanks for any help,
Chris Bennett
tion.
Isn't sslv3 disallowed in the default config???
If it's only for reading and not sending mail, then just manually set it
up as sslv3 allowed.
Hopefully this is helpful. Debug logs can be helpful \o/, or just confusing
:-[ but they are long to read through.
Good luck!
Chris Bennett
> Honestly, I do not main HTML per se, it is when the HTML specifies font size,
> colors, background colors, and other garbage like that that I despise it. A
> well formed HTML message is is fine, but those are very rare.
+1
Thanks for the great software and long hard work to find the most
miniscule hidden bugs!
Chris Bennett
>> Dovecot
>> # startup and passed down to all of its child processes. You can also give
>> # key=value pairs to always set specific settings.
>> #import_environment = TZ
>>
>> ##
>> ## Dictionary server settings
>> ##
>>
>> # Dicti
5 on secure cookies for that very
reason. Website software, not dovecot.
Hopefully that's helpful. I dropped one of my bare metal servers because
the company couldn't keep other spammers off of the IP block I was in.
They refused to do anything to clean up their blacklist, which included
me unfortunately.
Chris Bennett
owners
wanted it done.
-
As far as 2FA over a phone, I hate it.
When traveling, my phone only works in USA, Canada and Mexico.
If I were in Guatemala, I'd have no access to my DNS server company.
Ugh!
--
Chris Bennett
another career.
--
Chris Bennett
my past experience.
Secure today is wide open tomorrow. File, memory, etc. all get broken
eventually. I'm much more worried about my own mistakes than that of
others. :-*
--
Chris Bennett
files".
Corrupt your mbox file and bad things happen!
I also like being able to throw in some older backed up email when I
find I need a few more to fill out that important thread from 3 years
ago with Maildir.
Maildir does not have the relational database problem of needing to keep
up with updates to the database software.
And nothing works very well when you suddenly discover that the company
you are renting servers from decides to close up and turn everything
off. While you are in another country with internet cafes only and don't
even have a laptop with you! Happened to me once. 8-{
--
Chris Bennett
h I could.
There are many other methods to block spam.
IMHO, blocking by tld is a bit harsh.
But you have the right to do whatever method you wish.
I will only point out my thoughts. SPAM sucks! :-)
--
Chris Bennett
are
problem.
Does anyone have any method to do that? I'd love to know that if it
exists.
I love Maildir, but the backups are very large. I don't have a huge set
of emails, but downloading a copy to home instead of my other server is
a big task.
Since I use a single ISP and once had a com
Amtrak train with connections fading in and out.
Someone shared some of their configs, but I still confused.
I may just scrap what Ie done and start fresh.
Would if be helpful if I followed up with each file inline
I was kirring then 40kb limit.
Thanks,
Chris Bennett
On Sun, May 17, 2020 at 01:00:53PM -0600, @lbutlr wrote:
> On 17 May 2020, at 11:08, Chris Bennett
> wrote:
> >
> > I realize that I dumpimg a lot of info out there.
>
> But not what we need.
>
> doveconf -n
> postfix -n (or equivalent)
>
> What MTA y
ssl = yes
protocol lmtp {
mail_fsync = optimized
}
protocol lda {
mail_fsync = optimized
}
protocol imap {
mail_max_userip_connections = 50
}
protocol pop3 {
mail_max_userip_connections = 20
}
--
Chris Wik
Anu Internet Services
www.anu.net | www.cwik.ch
From: Aki Tuomi
To: Dovecot Mailing List , Chris Wik
Sent: 18/09/2016 8:06 AM
Subject: Re: Panic: file auth-request.c
> Sep 17 19:34:57 mail dovecot: auth: Panic: file auth-request.c: line 1049
> (auth_request_lookup_credentials): assertion failed:
>
From: Tanstaafl
To:
Sent: 19/09/2016 5:44 PM
Subject: Re: Panic: file auth-request.c
On 9/17/2016 2:15 PM, Chris Wik wrote:
> So we upgraded to a new CentOS 7 server with SSD RAID, fast CPUs and
> tons of RAM. No more load problems. We compiled the latest dovecot
"home directory" files
and which files are "mail files"?)
Thank you,
Chris
Example home directory:
drwx-- .
drwxr-xr-x ..
drwx-- .Archives
drwx-- .Archives.2016
drwx-- .Archives.2017
drwx-- .Drafts
drwx-- .Junk
dr
h aptitude.
--
-------
Chris Hoogendyk
-
O__ Systems Administrator, Retired
c/ /'_ --- Biology & Geosciences Departments
(*) \(*) -- 315 Morrill Science Center III
~~ - University of Massachusetts, Amherst
---
Erdös 4
do a release upgrade this summer.
Any further guidance would be much appreciated. If any further information is
needed, I can provide it.
On 3/21/22 1:57 AM, Aki Tuomi wrote:
On 20/03/2022 22:36 Chris Hoogendyk wrote:
I'm posting to the list, but not on the list. I presume that means a
however, we do have an Ubuntu Advantage account for this server. So
we do get security patches and the hope is that we can do a release upgrade this summer.
Any further guidance would be much appreciated. If any further information is needed, I can
provide it.
On 3/21/22 1:57 AM, Aki Tuom
rvers this month. We have hundreds of accounts, so it
doesn't scale to try to copy over individual accounts using individual's passwords.
Thank you,
---
Chris Hoogendyk
-
O__ Systems Administrator, Retired
c/ /'_ --- Biology & Geosciences Departments
entication goes to ldap.
Any help very much appreciated.
My doveconf output is already included in this thread, so I won't repeat it. The only thing I've
changed is the debug levels. If there is anything else that would be useful to know, please let me
know.
---
Chris Ho
So this is resolved.
Turns out that getting rid of the "result_success = continue" fixed it. Which is odd, because I
thought from the documentation that that was required.
Anyway. Fixed.
On 6/20/22 2:53 PM, Chris Hoogendyk wrote:
Hoping that someone can help with this. It&#x
Over the last several months we have seen what seems like large delays in email
delivery as well, we get emails at 11AM that are time stamped at 9:10. I
thought it was a networking issue, but I can’t be sure. I wish I knew more
about coding, to look under the hood to examine things further.
this problem in my search. Is this a known issue, is there a way to force
the multi-line AUTHENTICATE, something else I'm missing ? Any help is
appreciate on this!
-Chris
--
---
====
Chris Candreva -- ch...@westnet.c
16:45:22
-0500 (EST)
SSL Banner on 993:
* OK [CAPABILITY IMAP4REV1 I18NLEVEL=1 LITERAL+ SASL-IR LOGIN-REFERRALS
AUTH=PLAIN AUTH=LOGIN] foo.com IMAP4rev1 2007e.404 at Wed, 8 Feb 2023
16:53:36 -0500 (EST)
> > On 08/02/2023 06:24 EET Chris Candreva wrote:
> >
> >
> >
re
situation hopefully they find this ! Of course if anyone knows why this
happens I'd love to hear it.
-Chris
On Wed, 8 Feb 2023, Chris Candreva wrote:
>
> On Wed, 8 Feb 2023, Aki Tuomi wrote:
>
> > Can you try setting imapc_sasl_mechanisms to login, maybe it works better?
On Sun, 26 Feb 2023, Ken Bass wrote:
> doc.dovecot.org does not have a DNS entry. It worked a few days ago, but not
> now.
[chris@newpop ~]$ host doc.dovecot.org
doc.dovecot.org is an alias for talvi.dovecot.org.
talvi.dovecot.org has address 94.237.105.223
talvi.dovecot.org has IPv6 a
king.
Any idea of how or why this would not be showing the correct date? I've
used this setup in the past on other servers with dovecot and it has
worked great, no idea why we would be seeing this issue now.
Thanks in advance.
Chris
___
doveco
On 2023-05-17 18:28, Joseph Tam wrote:
Chris Szilagyi writes:
Recently, I noticed that our expunge script is not working, and I
don't
think it ever has on this server. On further inspection, it looks
like
the saved date for emails in the folders we want to expunge is set to
a
recent
the actual sending.
All the logging is turned on there too. But I can't figure out what the
problem is.
Is there anything I can look for in the logs that will help me out?
chris
___
dovecot mailing list -- dovecot@dovecot.org
To unsubscribe send an email to dovecot-le...@dovecot.org
t;
> > Op 20 jul. 2023 om 14:26 heeft Chris Thomas
> het volgende geschreven:
> >
> >
> > Hi,
> >
> > I'm getting a curious problem where if I write a draft without an
> attachment and click save. It'll work without any issue at all.
> &
gt; Jul 20 15:06:21 imap(myu...@mydomain.com)<2181><7W6sfewAb8VfWumz>: Debug:
> maildir++: root=/mail/mydomain.com/myuser, index=, indexpvt=, control=,
> inbox=/mail/mydomain.com/myuser, alt=
> Jul 20 15:06:21 imap(myu...@mydomain.com)<2181><7W6sfewAb8VfWumz>: Debug:
Maybe this is over simplifying things but can you just open the pst file in
outlook and then rename the folder, then import?
Sent from my iPhone
> On Aug 3, 2023, at 9:03 PM, Scott wrote:
>
> Is this possible at all ?
>
> I am trying to import a PST file and it has a slash in the folder name
re people insist on mailing documents to everyone, and
using email as a document storage system, yes, it is very useful.
--
---
====
Chris Candreva -- ch...@westnet.com -- http://www.westnet.c
RHEL/CentOS
7).
Thanks. If there's not a way to do this directly in Dovecot, does
anybody have any suggestion that doesn't require several different VMs?
--
Chris Adams
ds to
the local IP address "almost everywhere". If that's available in the
userdb SQL expansion, I could write a (somewhat convoluted) SQL
statement that adds a domain based on the local IP. Does that sound
like it'll work? Not quite as "elegant" as just setting
auth_default_realm in separate listeners, but should work I guess.
--
Chris Adams
Once upon a time, Chris Adams said:
> All my users are in MySQL. Reading the docs, I see that "%l" expands to
> the local IP address "almost everywhere". If that's available in the
> userdb SQL expansion, I could write a (somewhat convoluted) SQL
> stat
Not quite as HA, but I
have my monitoring system doing SMTP AUTH (never have had a problem with
the setup); you could probably have HAProxy do it as well (IIRC it can
do some basic expect-style send/receive).
--
Chris Adams
h to
something else that is available in the base installation of FreeBSD as well
as the variety of Linux distributions.
I agree that it's not hard to install the bash port. But if you don't plan
to use
it for anything else, it's better not to have to.
- Chris
multiple From: and Subject: headers. Would that cause sieve to
"punt" on the message (but not log anything about it)?
--
Chris Adams
ourier; I made the switch a couple
of weeks ago (not my first time using Dovecot, just finally got a chance
to migrate this setup).
Thanks.
--
Chris Adams
1 - 100 of 385 matches
Mail list logo
