Dear Tom,
I backtraced this call and there is no implementation of gnuradio
preference file. When it is called the architecture, it returns
gr_prefs::singleton()->get_string("audio", "audio_module", "auto");
Thus, get_string is implemented as this:
const std::string
gr_prefs::get_string(const std:
Hi All,
I have USRP N210 but I cannot probe it using usrp2_probe.
when I am trying capture packet, it is said "No USRPs found on interface
eth0"
*
*
*sudo usrp2_rx_cfile.py -f 94400 test*
*Traceback (most recent call last):*
* File "/usr/local/bin/usrp2_rx_cfile.py", line 139, in *
*tb =
Hi all
I've had success compiling gnuradio from source on OS X 10.8.2[1].
Now I'm facing the issue mentioned in the subject.
There is already an open bug @
http://sourceforge.net/tracker/?func=detail&aid=3526361&group_id=5988&atid=105988
It's the same with my installation, but I'm using OS X 1
Hi Tom & All,
I am now doing consume_each(noutput_items) but my problem is not solved yet. I
have also made sure that my code effectively sends one sob tag and one eob tag
per burst of samples.
Questions about new experiment:
Now, I have created yet another simple experiment whose flow-graph is
Can i use my own system as both a source as well as sink to test the same ?
It is because i do not have two terminals at my disposal for the time being.
I am proposing the following model :
TX FlowGraph:
vlc Streaming(UDP) (My PC?) -> GR UDP Source -> GR TX
blocks
RX FlowGraph:
I contacted Ettus Tech support. They said that basicRx card samples
at higher Nyquist region. So, it requires external RF gain and filtering
component.
Can someone suggest such a RF component which I can buy off-the-shelf
which can work with basicRx card?
Thanks.
-Original Message-
Fro
I contacted Ettus Tech support. They said that basicRx card samples
at higher Nyquist region. So, it requires external RF gain and filtering
component.
Can someone suggest such a RF component which I can buy off-the-shelf
which can work with basicRx card?
Thanks.
One of these:
http://www.
Hello,
I have read in your frequently ask questions that we may record data from two
daughter boards in one USRP. But i have the same question but in different way.
Can we use one daughter card as sender and the other as receiver, rather using
two USRP for this purpose.
Best Regards.
- For
Hello community,
I am trying to use the uhd_rx_cfile command to capture some rx samples in
the hope of recovering what I see as streaming samples in the uhd_fft Scope
mode display. Since I am really new to GR+USRP, I have a couple of
difficulties:
1. The uhd_rx_cfile command help menu does not pr
Can we use one daughter card as sender
> and the other as receiver, rather using two USRP for this purpose.
>
USRP1 may have 2 transmitter and 2 receiver frontends.
You may transmit from either frontend and receive from either frontend.
Any combination should be OK.
Cheers,
-josh
> Best Rega
On 09/25/2012 07:29 PM, LD Zhang wrote:
> Hello community,
>
> I am trying to use the uhd_rx_cfile command to capture some rx samples in
> the hope of recovering what I see as streaming samples in the uhd_fft Scope
> mode display. Since I am really new to GR+USRP, I have a couple of
> difficulti
CALL FOR PAPERS
ACM/IEEE ICCPS 2013
Philadelphia, USA
April 8-11, 2013
http://cesg.tamu.edu/iccps2013/
Cyber-physical systems are systems with a coupling of the cyber aspects
of computing and communications with the physical aspects of dynamics
and engineering that must abide by th
Hi,
I've just finished my block that generates PSDUs and then, it transmits
downstream subscribers using message passing mechanism. I am using as a
sink "Extras: Blob to Socket", but when I run my flowgraph in GNU Radio
Companion (after connect my new block and the sink), I got the following
error
On 09/26/2012 12:47 AM, Jose Torres Diaz wrote:
> Hi,
>
> I've just finished my block that generates PSDUs and then, it transmits
> downstream subscribers using message passing mechanism. I am using as a
> sink "Extras: Blob to Socket", but when I run my flowgraph in GNU Radio
> Companion (after
Hi Josh,
I've attached the xml file for "my_block.xml". I don't have a .i file (like
"my_block.i"), because it is using the "extras_blobs.i" file. I've attached
for you extras_blob.i and I added some lines to that .i file in order to
include "my_block".
All the example is based on blob to stream
Hi,
I did try and made a GRC example of using a USRP Source and a fft sink,
scope sink, and a file sink to test out the idea.
When looking at the scope sink, the data is about +/- 2x10^-4. I changed
the gain of the USRP source block to 20 dB. But nothing happened to the
signal amplitude. How is t
I m using USRP2,I have configured usrp2 and tested
uhd_usrp_probe,uhd_siggen_gui and uhd_fft all works fine.
Now i want to make my own program like uhd_fft but there is a problem that
the terminal prompt returns right after i execute the program with
notification
root@aqs-desktop:/home/aqs/Deskto
Internship opportunities in GNU software-defined radio application development
(Stipend AU$600 to AU$1,200 per week)
CSIRO's Autonomous System lab is a premiere research centre in pervasive
computing and field robotics. AS lab is seeking a couple of talented
individuals to join us for a 6-month
18 matches
Mail list logo
