Can we use one daughter card as sender > and the other as receiver, rather using two USRP for this purpose. >
USRP1 may have 2 transmitter and 2 receiver frontends. You may transmit from either frontend and receive from either frontend. Any combination should be OK. Cheers, -josh > Best Regards. > > ----- Forwarded Message ----- From: Sajjad Safdar > <engrsajjadsaf...@yahoo.com> To: "discuss-gnuradio@gnu.org" > <discuss-gnuradio@gnu.org> Sent: Thursday, September 20, 2012 6:46 > PM Subject: Using two daughter boards in USRP1. > > > Hello, I am trying to use two daughter boards in one USRP1. I have > RFX400 on one side A and TVRX on side B. When i try to use two > seprate terminals to test the daughter cards in such a way that > RFX400 is transmitting and TVRX is recieving on the same USRP1 device > using uhd_fft and benchmark_tx.py for sending data, but this does not > work. when i run uhd_fft the scanning works but when i try to run > benchmark_tx in another window, it gives some error tha can not find > usrp device, how can i make it possible to work with both cards on > the same device rather than using two different devices. > > > > _______________________________________________ Discuss-gnuradio > mailing list Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
