On 04/07/2015 06:50 AM, David Halls wrote:
Dear All,
For some experiments I would like to transmit using N210s with
XCVR2450 with maximum transmit gain.
I can see Ettus website that the XCVR2450 board in the transmit path
has a gain of:
VGA: 0-30 dB range
BB: 0-5 dB range
Can I just s
?Dear All,
For some experiments I would like to transmit using N210s with XCVR2450 with
maximum transmit gain.
I can see Ettus website that the XCVR2450 board in the transmit path has a gain
of:
VGA: 0-30 dB range
BB: 0-5 dB range?
Can I just set the gain via GNU Radio/UHD to 35, or do I ne
n...@ettus.com]
> Sent: Friday, July 29, 2011 7:59 PM
> To: Burak Kelleci
> Cc: discuss-gnuradio@gnu.org
> Subject: Re: [Discuss-gnuradio] N210 XCVR2450
>
> On Fri, 2011-07-29 at 19:40 +0300, Burak Kelleci wrote:
> > Hi,
> >
> > I am trying to send data
On 08/03/2011 12:09 PM, Burak Kelleci wrote:
> Hi,
>
> I have replaced XCVR2450 with LFTX and checked the output using an
> oscilloscope. I have applied an AM signal with 100KHz carrier
> frequency and 10KHz message signal frequency. I selected the
> amplitudes so that total signal amplitude is
Sent: Friday, July 29, 2011 7:59 PM
To: Burak Kelleci
Cc: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] N210 XCVR2450
On Fri, 2011-07-29 at 19:40 +0300, Burak Kelleci wrote:
> Hi,
>
> I am trying to send data from a N210+XCVR2450 to another N210+XCVR2450.
> Both equipm
On 29/07/2011 12:40 PM, Burak Kelleci wrote:
Hi,
I am trying to send data from a N210+XCVR2450 to another N210+XCVR2450.
Both equipment have antennas connected at J2 antenna input and they are
connected to the same computer using 2 gigabit ethernet ports. I have
assigned different ip addresses a
On Fri, 2011-07-29 at 19:40 +0300, Burak Kelleci wrote:
> Hi,
>
> I am trying to send data from a N210+XCVR2450 to another N210+XCVR2450.
> Both equipment have antennas connected at J2 antenna input and they are
> connected to the same computer using 2 gigabit ethernet ports. I have
> assigned dif
