You are probably ok, but you might also want to use bandpass filters to
keep the excess TX power out of the RX.
Matt
On Wed, Jan 4, 2012 at 2:59 PM, Ed Criscuolo wrote:
> I'm working on an application that will do full-duplex using an RFX2200
> daughterboard in a USRP1.
>
> The transmit frequenc
I'm working on an application that will do full-duplex using an RFX2200
daughterboard in a USRP1.
The transmit frequency will be about 2.055 GHz, and the receive freq
will be about 2.255 GHz.
Up until now, we've been working with only the transmit or the receive
flowgraph separately. Now we're
Hi,
1) I removed tx_io[15] from my design
2) Change fifo_not_full signal to fifo_almost_full
3) I tried to follow most of your suggestions to achieve better timing
4) I use minimum cable length.
Now I'm observing strange behavior. I grounded Virtex board and USRP2 board
t
Hi all,
Using RFX1800 daughterboard and two computer, I sent a signal from one usrp
to the other. The signal's frequency is 100KHz and usrp sink at 1.7GHz.
Also usrp Source is at 1.7Ghz. Sample Rate is chosen 1M so decimation 64
and interpolation 128. Usrp sink gain is useles I guess, because I cha
Did you solve the seg fault problem on uhd_fft ?
Vanessa
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
