You are probably ok, but you might also want to use bandpass filters to keep the excess TX power out of the RX.
Matt On Wed, Jan 4, 2012 at 2:59 PM, Ed Criscuolo <edward.l.criscu...@nasa.gov>wrote: > I'm working on an application that will do full-duplex using an RFX2200 > daughterboard in a USRP1. > > The transmit frequency will be about 2.055 GHz, and the receive freq > will be about 2.255 GHz. > > Up until now, we've been working with only the transmit or the receive > flowgraph separately. Now we're about to integrate the two and I have > concerns. > > In the lab, the transmit and receive sides will be hooked to separate > antennas. I am aware that the input to the receiver should not exceed > -10dBm in order to avoid damaging it. I'm concerned that the transmit > antenna will be a short distance away, blasting out 100mW (+20dBm). > > Am I right to be concerned? By my rough back-of-the-napkin > calculations, with 3dB antennas, and about 1 1/2 meters separation, > I should be between -20 dBm and -10 dBm at the receiver. > > > @(^.^)@ Ed > > ______________________________**_________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/**listinfo/discuss-gnuradio<https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
