Add the following to /etc/apt/sources.list, either directly or add the
line in Synaptic:
deb http://gnuradio.org/ubuntu 3.2 main
Then just do:
$ sudo apt-get install grc
Muhammad Abrar wrote:
I have installed version of GNURadio is 3.04 on Ubuntu 8.10.
I want to get new version so that I can
Hi,
i have modified the benchmark_rx example.
- I moved the usrp part to the receiver_path und made the block 0
input 0 output.
- I also added another hierarchical block with a signal path which
just sends out a sinus signal on another frequency than the rx-freq.
when I connect both hier-
In addition to my above mentioned question, please also comment on what
should be the value of mux (I am setting 0x3210) and what should be the
value of fpga_filename,
Please again note that I want to use 2 RFX2400 cards with one USRP1, and 2
rx streams will be there each through RX2 antenna of 2
Hello every one,
I am using USRP1 + RFX2400.
I want to use 2 RFX2400 cards. Overall I will have 2 RX streams and 1 TX
stream from this system. Following are main parts of my RX_Path (complete
code for RX-Path is also attached, if you want please have a look on that,
TX-path is not here). I am un
Hi all
I'm trying to use the USRP1 as a beacon receiver i.e. measure the
amplitude and frequency of a signal then store the detected values to
file. I'm using the DBSRX daughter board to measure satellite beacons.
However I have ran into some problems. When viewing the FFT plot from
USRP_
