groups.io; l...@nuviainc.com; Kinney, Michael D
>
> Cc: pedro.falc...@gmail.com
> Subject: Re: [edk2-devel] GSOC 2021 EXT4 driver Project
>
> I had done some of the early work in moving content to
> edk2-platforms/Features. Just wanted to add my support for maintaining
> this
some of that content up a level, so an
alternative path would be:
edk2-platforms/Features/Ext4Pkg
Best regards,
Mike
From: devel@edk2.groups.io On Behalf Of Pedro Falcato
Sent: Monday, May 24, 2021 12:27 PM
To: devel@edk2.groups.io
Subject: [edk2-devel] GSOC 2021 EXT4 driver Pr
e:
>
> edk2-platforms/Features/Ext4Pkg
>
> Best regards,
>
> Mike
>
>
> From: devel@edk2.groups.io On Behalf Of Pedro Falcato
> Sent: Monday, May 24, 2021 12:27 PM
> To: devel@edk2.groups.io
> Subject: [edk2-devel] GSOC 2021 EXT4 driver Project
>
: [edk2-devel] GSOC 2021 EXT4 driver Project
Hi everyone,
Me and my project have been selected for GSoC this year, under Michael Kinney
and bret. Thank you for the opportunity to collaborate with you and improve
Tianocore!
If anyone has any questions, please fire away :)
How do I get started? I&#
On 28/05/2021 18:16, Pedro Falcato wrote:
2) Although I'd love to avoid journaling, which is a matter I'm not too
familiar with, I'm not entirely sure what simplifications may be done
because for one,
what happens if the power cuts during a write? It's unclear to me how a
FW filesystem driver m
Hi Michael,
Sorry for the delay, I've been quite busy with work these past few days.
Yes, it sounds good, I'll keep it on a separate repo until it's actually more
or less mature.
As for your questions,
1) I'm planning to make this read-write, but most importantly, I want it to be
solid. If I
On 24/05/2021 20:26, Pedro Falcato wrote:
Me and my project have been selected for GSoC this year, under Michael
Kinney and bret. Thank you for the opportunity to collaborate with you
and improve Tianocore!
If anyone has any questions, please fire away :)
How do I get started? I'd like to find
-II-Draft-Specification
Best regards,
Mike
===
From: devel@edk2.groups.io On Behalf Of Pedro Falcato
Sent: Monday, May 24, 2021 12:27 PM
To: devel@edk2.groups.io
Subject: [edk2-devel] GSOC 2021 EXT4 driver Project
Hi everyone,
Me and my project have been selected for GSoC this
Hi everyone,
Me and my project have been selected for GSoC this year, under Michael Kinney
and bret. Thank you for the opportunity to collaborate with you and improve
Tianocore!
If anyone has any questions, please fire away :)
How do I get started? I'd like to find some easier tasks as to start
ilto:devel@edk2.groups.io>
mailto:devel@edk2.groups.io>>; Schaefer, Daniel
mailto:daniel.schae...@hpe.com>>;
gaolim...@byosoft.com.cn<mailto:gaolim...@byosoft.com.cn>
mailto:gaolim...@byosoft.com.cn>>;
kaaira7...@gmail.com<mailto:kaaira7...@gmail.com>
mailto:kaa
behalf of Michael Kubacki
Sent: Friday, May 21, 2021 00:32
To: Oram, Isaac W ; devel@edk2.groups.io
; Schaefer, Daniel ;
gaolim...@byosoft.com.cn ; kaaira7...@gmail.com
; Ni, Ray
Subject: Re: 回复: [edk2-devel] GSoC 2021 Qemu OpenBoardPkg Project
Daniel,
You will specifically find attempts to
, Ray ;
mikub...@linux.microsoft.com
*Subject:* Re: 回复: [edk2-devel] GSoC 2021 Qemu OpenBoardPkg Project
Hi,
that sounds like a great project!
I'm currently trying to create an equivalent of OvmfPkg for the RISCV64
generic QEMU virt machine.
I don't like how much of my DSC and FDF file h
additional applications.
Regards,
Isaac
From: devel@edk2.groups.io On Behalf Of Daniel Schaefer
Sent: Wednesday, May 19, 2021 8:40 PM
To: devel@edk2.groups.io; gaolim...@byosoft.com.cn; kaaira7...@gmail.com; Ni,
Ray ; mikub...@linux.microsoft.com
Subject: Re: 回复: [edk2-devel] GSoC 2021 Qemu
oft.com.cn
; kaaira7...@gmail.com ; 'Ray
Ni'
Subject: Re: 回复: [edk2-devel] GSoC 2021 Qemu OpenBoardPkg Project
I also wanted to add that I will be setting up weekly video calls
including Ray that we can use to supplement mailing list communication.
I suggest the primary communicat
22:42
收件人: Ray Ni ; devel@edk2.groups.io
主题: Re: [edk2-devel] GSoC 2021 Qemu OpenBoardPkg Project
On Tue, May 18, 2021 at 08:01:57PM +0530, Kaaira Gupta wrote:
Hey everyone,
I have been selected as a student developer for the project MinPlatform
Qemu OpenBoardPkg under the mentors Ray Ni and Micha
rward to working with you.
Regards,
Michael
On 5/18/2021 6:05 PM, gaoliming wrote:
Include Michael Kubacki.
Thanks
Liming
-邮件原件-
发件人: devel@edk2.groups.io 代表 KAAIRA
GUPTA
发送时间: 2021年5月18日 22:42
收件人: Ray Ni ; devel@edk2.groups.io
主题: Re: [edk2-devel] GSoC 2021 Qemu OpenBoardPkg Project
O
@edk2.groups.io; kaaira7...@gmail.com; Ni, Ray
Cc: mikub...@linux.microsoft.com
Subject: 回复: [edk2-devel] GSoC 2021 Qemu OpenBoardPkg Project
Include Michael Kubacki.
Thanks
Liming
> -邮件原件-
> 发件人: devel@edk2.groups.io 代表 KAAIRA GUPTA
> 发送时间: 2021年5月18日 22:42
> 收件人: Ray Ni ; de
> On May 18, 2021, at 9:14 AM, Ethin Probst wrote:
>
> Greetings everyone!
>
> I've been selected as a student coder for the audio output protocol
> project with Ray Ni and Leif Lindholm as my mentors. This is my first
> time doing GSoC and working on EDK II so this will be very enjoyable
> a
Include Michael Kubacki.
Thanks
Liming
> -邮件原件-
> 发件人: devel@edk2.groups.io 代表 KAAIRA
> GUPTA
> 发送时间: 2021年5月18日 22:42
> 收件人: Ray Ni ; devel@edk2.groups.io
> 主题: Re: [edk2-devel] GSoC 2021 Qemu OpenBoardPkg Project
>
> On Tue, May 18, 2021 at 08:01:57PM +
Greetings everyone!
I've been selected as a student coder for the audio output protocol
project with Ray Ni and Leif Lindholm as my mentors. This is my first
time doing GSoC and working on EDK II so this will be very enjoyable
and a wonderful learning opportunity for me. (It'll also give me
someth
On Tue, May 18, 2021 at 08:01:57PM +0530, Kaaira Gupta wrote:
> Hey everyone,
>
> I have been selected as a student developer for the project MinPlatform
> Qemu OpenBoardPkg under the mentors Ray Ni and Michael Kubacki. Thankyou
> for this opportunity. I have been over the major chapters of Beyond
Hey everyone,
I have been selected as a student developer for the project MinPlatform
Qemu OpenBoardPkg under the mentors Ray Ni and Michael Kubacki. Thankyou
for this opportunity. I have been over the major chapters of Beyond BIOS
as recommended by Nate DeSimone. I want to get familiar with the c
Hi Nate, Andrew,
Sounds great! I'll finish up my proposal and submit it tonight.
Thank you all for your advice!
Hopefully we'll see each other again in the summer :D
Thanks,
Pedro
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#73735):
:50 AM
To: "Desimone, Nathaniel L" ,
"devel@edk2.groups.io"
Subject: Re: [edk2-devel] GSoC 2021 (MinPlatform, Ext2, ACPICA, etc)
Hi,
Sounds great! You may be right about that, although I believe I read somewhere
that you need to set a milestone for each evaluation? If so,
> On Apr 4, 2021, at 3:50 AM, Pedro Falcato wrote:
>
> Hi,
>
> Sounds great! You may be right about that, although I believe I read
> somewhere that you need to set a milestone for each evaluation? If so, I'm
> out of ideas as to what can be tangible enough to be a milestone; if not,
> spec
Hi,
Sounds great! You may be right about that, although I believe I read somewhere
that you need to set a milestone for each evaluation? If so, I'm out of ideas
as to what can be tangible enough to be a milestone; if not, specifying a
read-only driver as project's objective and having write sup
.groups.io
Subject: Re: [edk2-devel] GSoC 2021 (MinPlatform, Ext2, ACPICA, etc)
Hi Nate,
Everything you said sounds great :))
I did end up going with ext4 as a target, as I find it's the more useful and
more interesting project, the only thing I'm not too sure of is whether or not
to add write
Hi Bret,
I've shared the project's draft with Tianocore, take a look and give out some
feedback if you want to :)
Thanks, it's great to work with you folks too!
Pedro
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#73582): https://edk2.
Hi Nate,
Everything you said sounds great :))
I did end up going with ext4 as a target, as I find it's the more useful and
more interesting project, the only thing I'm not too sure of is whether or not
to add write support as one of the project's targets.
Anyway, I've just shared my draft with T
devel@edk2.groups.io<mailto:devel@edk2.groups.io>
Subject: [EXTERNAL] Re: [edk2-devel] GSoC 2021 (MinPlatform, Ext2, ACPICA, etc)
Hi Pedro,
No problem, I’ve been really busy recently too 😊. I definitely recommend
setting up filtering rules for the edk2 mailing list(s) because there i
mone, Nathaniel L ; devel@edk2.groups.io
Subject: Re: [edk2-devel] GSoC 2021 (MinPlatform, Ext2, ACPICA, etc)
Hi Nate!
Sorry for taking so long to get back to you, I've been a bit busy and I'm not
too used to so many emails in my inbox :)
So, if I'm getting this right, essential
Hi Nate!
Sorry for taking so long to get back to you, I've been a bit busy and I'm not
too used to so many emails in my inbox :)
So, if I'm getting this right, essentially what is proposed in the MinPlatform
board ports is to refactor the existing board code into an OpenBoardPkg that
uses MinP
ve a better idea of it than I do 😊.
Sorry for the long email, but I hope it helps. Finally I'd like to reiterate...
Welcome to the project!
With Best Regards,
Nate
From: devel@edk2.groups.io On Behalf Of Pedro Falcato
Sent: Friday, March 12, 2021 5:08 AM
To: devel@edk2.groups.io
Subject: [ed
Hi Andrew,
Thanks for the quick response! I'll be sure to check out the training, it looks
very interesting and useful. I'll also keep reading the specs, the details
might be important to know.
Thanks again,
Pedro Falcato
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent
> On Mar 12, 2021, at 5:07 AM, Pedro Falcato wrote:
>
> Hi everyone!
>
> I'm Pedro Falcato, a student from FCT Nova in Lisbon, Portugal. I've gotten a
> bunch of experience over the years with C/C++, x86 in general and UEFI/ACPI
> with my hobby OS/kernel development, and I've got to say, I'm
adding Nate
On 03/12/21 18:15, Pedro Falcato wrote:
> Hi everyone!
>
> I'm Pedro Falcato, a student from FCT Nova in Lisbon, Portugal. I've gotten a
> bunch of experience over the years with C/C++, x86 in general and UEFI/ACPI
> with my hobby OS/kernel development, and I've got to say, I'm quit
Hi everyone!
I'm Pedro Falcato, a student from FCT Nova in Lisbon, Portugal. I've gotten a
bunch of experience over the years with C/C++, x86 in general and UEFI/ACPI
with my hobby OS/kernel development, and I've got to say, I'm quite interested
in some of the projects you've got here. Please i
Hi everyone!
I'm Pedro Falcato, a student from FCT Nova in Lisbon, Portugal. I've gotten
a bunch of experience over the years with C/C++, x86 in general and
UEFI/ACPI with my hobby OS/kernel development, and I've got to say, I'm
quite interested in some of the projects you've got here.
So, a few
Hi Kaaira,
Great to meet you and welcome to the TianoCore project! Glad you hear you are
interested! The MinPlatform QemuOpenBoardPkg project would be an excellent GSoC
project! I was hoping that someone would pick that one! I would be happy to
answer any questions you have about it.
With Best
Hey everyone! My name is Kaaira Gupta. I am a junior at IIT Roorkee, India.
I am experienced in C, C++ and Linux kernel. I have gone through the ideas
list and I find the idea of building MinPlatform board port for Qemu very
interesting. Currently I am reading the information of this task posted
wi
40 matches
Mail list logo
