ext3 and ARM

Hi, i would like to install debian on ARM with ext3. i guess i need bf2.4 floppies, but i cannot find them on the official debian site. where to find those bf2.4 flavour floppies for ARM? thank you -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [

konqueror is slow

Hi all. On my laptop, konqueror takes, sometimes, tens seconds to access pages. Since character terminal 'links' web browser quickly navigates across the internet, network setting should be ok. Any hints? What to check for mis-configuration? thank you for your help -- Po

Re: konqueror is slow - X issue?

you help -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

kmail and imap

not identify itself anymore. Yet Mutt works properly through dovecot, as always. Any ideas? thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

k3b mesure of dir size across nfs

is running, returs about 0.5 gb only . That is the probable correct value, being the same that is found by 'du -s' on the remote machine. How to fix that strange k3b behaviour? thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: k3b mesure of dir size across nfs - no symb links

pol wrote: > K3b has just reported the selected remote directory to be more than 2 gb > large. Yet the same mounted directory, as measured by 'du -s' on the local > station, where k3b is running, returs about 0.5 gb only . That is the > probable correct value, being the sam

pacakges installation report

i would like to log installation and uninstallation of the deb packages: i mean a time ordered list of the admin operations. Any ideas? thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Installing on hp tablet laptop from a pen drive

e terminal prompt? As a last resource, I would try lilo as loader, which i have successfully been using for a dozen years, now. Would anybody suggest a suitable configuration for lilo? Thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Tro

xorg overloaded

ue? thank you -- pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: xorg overloaded

ing 'top' is not a reliable program? -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

file modification time

s: 100664, succesfully exiting with wq. I have checked that modification date had changed. As i try 'touch -m 12302007' i get: 'Operation not permitted' What is wrong? thank you for you seggestions -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of &

hard disk spin down

? Thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

editing avi files

How to edit video files (especially avi files) to select a short piece from the whole? thanks -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

system heavy load

i can infer from the hard disk monitoring led). So what can i do to inderstand iwhat s happening? Is 'top' a reliable application? thank you --pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

copying ms-windows

I am planning to change my hard disk, where linux will be re-installed. I would like to move my ms-windows/xp bootable partition to the new disk, without re-installing. Is that possible? Any suggestions? Thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of

cannot install openoffice

not installable Depends: libstlport4.6 but it is not installable Depends: openoffice.org (> 1.1.2+1.1.3) but it is not going to be installed E: Broken packages Same result, trying debian/stable Any help? thank you --pol -- To UNSUBSCRIBE, email to

Cannot install openoffice

ble Depends: libstlport4.6 but it is not installable Depends: openoffice.org (> 1.1.2+1.1.3) but it is not going to be installed E: Broken packages Same result, trying debian/stable Any help? thank you --pol -- To UNSUBSCRIBE, email to [EMAIL PRO

using lirc

I would like to install lirc, but i am using a custom kernel (i.e. not 'debianized'). Should i get the original lirc tar file or it it possible to adapt the deb package? thank you --pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Tro

Using lirc

I would like to install lirc, but i am using a custom kernel (i.e. not 'debianized'). Should i get the original lirc tar file or it it possible to adapt the deb package? thank you --pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Tro

can't install sl-modem

** [all] Error 2 make[2]: Leaving directory `/usr/src/modules/sl-modem/drivers' make[1]: *** [binary-modules] Error 2 make[1]: Leaving directory `/usr/src/modules/sl-modem' make: *** [kdist_build] Error 2 Any hints? thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECT

udev not working properly

- is it normal? thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

konqueror crash

, any new konqueror instaces start flawlessly. Any idea? thank you for your help -- Pol enc. (no debugging symbols found) Using host libthread_db library "/lib/tls/libthread_db.so.1". (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debuggi

disk temp monitoring

ry minutes? Are the disk and the cpu the only possible causes of heating? What facilities to use to tell whether the disk is spinning? thank you for your help -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: disk temp monitoring

s between 40 C and 50 C are > usually fine. So it the cpu that is overheating Thank you for your suggestions about laptop-mode-tools and hdparm -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: disk temp monitoring

from the ground, just to not overheat, but it shuts down anyway. > What about an external laptop cooler (a cold pad that it sits on)? it would be my last resort, but what when i am travelling? Morever i woudl like to undersand what is happenening to my laptop thank you -- Pol -- To UNS

Re: disk temp monitoring

und in > Unstable and Experimental), and see if that helps. Some popular laptops > need at least 2.6.21 to work properly. i am running k/ubuntu, for which 2.6.21 is not yet available. If needed i can compiile it by myself but it woudl take me a lot of time. thank you -- Pol -- To UNSUBSC

Re: disk temp monitoring

hether these data can be correlated with others, to spot the hardware involved in overheating. thank you -- Pol --- enc. uname -a inux ambhi 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686 GNU/Linux cat /proc/cpuinfo | grep model model : 13 model name : Intel(R) Penti

Re: disk temp monitoring - critical temperature reached

pol wrote: > After ms-windows xp has been running for hours, the lapto is mildly warm > on the lower side, so the overheating issue seems to rise only when linux > is running. > I have updated the bios and now things are getting better with linux. > Until my laptop is plugged i

filtering processes

I would like to display running processes together with their time elapsed since they were launched (real time, not the time spent by the cpu) and sort them with time. Any hints? thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe"

xterm hanging

conversion encountered errors xterm window cannot accept any input. Any ideas? thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

unable to boot from memory stick

deas? Thank you for your help -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: unable to boot from memory stick

pol wrote: > I have followed instructions from http://d-i.pascal.at/ > and used 1gb 'dikom' memory stick. The memory stick has been read, at last - i do not know how did i succeed, but i did. Now my problem is that the installer cannot find the iso image, which is in the memor

dialing phone numbers

Any hints about dialing numbers by your laptop keyboard to a phone connected through modem? Thank you ---P -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

my system packages list

I would like to install on a new station the same applications currently installed on my laptop. Any hints to run a script? Thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

monitoring swap i/o

hat swapping. Any hints? Thank you -- Pol -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Tuning access to the internet

How to tune access to the internet, to allow only certain users, or to limit access to certain hours of the day? Thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

re-using a damaged disk

I would like to re-use a physically crashed disk. My guess is that its surface has been damaged. I would like to re-install debian (or kubuntu). How is it possible to reformat the disk, without using the damaged area? Thank you - Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a

Re: re-using a damaged disk

the drive. > No noise from the drive. I'll give GRML a try thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: re-using a damaged disk

David wrote: > Andrei Popescu wrote: >> On Sun, Jan 06, 2008 at 04:04:10PM +0100, pol wrote: >>> I would like to re-use a physically crashed disk. My guess is that its >>> surface has been damaged. I would like to re-install debian (or >>> kubuntu). How is it po

Re: re-using a damaged disk

is running now, yet less than half partition has been scanned. My /usr partition is 2 GB. Is it possible to pause the process, so as to be able to restart fsck later? Thank you -- Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

[semi-OT] create playlist for android

my pc works I don't understand the problem I also used vlc and save, next modified the path of playlist: on vlc always works, with android not always :-( what is the correct way to create working playlist? thanks -- Pol

/dev/pts/

Hi folks, I'd like use write and talk(d) in jail env. When an user is logged, his don't have any tty (tty: not a tty). I assume it's a /proc/ problem. In /proc/self/fd/ every users had a symblic links to own pts How can I create this in jail env? I did many and many attempt..

Re: web proxy settings

information. Hi, i'm not sure, but u should see in /etc/apt/sources.list and remove proxy references. Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: apt-get trying to install new packages in floppy disk

1 mounted on / , > and a swap partition. > Thank you for your help in advance! Which motherboard u using? Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: problem with smartmontools

> Having trouble getting my SATA WD raptor 150G drive smart enabled. Have u abilitated bios smart feature? Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Kernel 2.4 on Etch

rs?) The only thing that u can do is try! Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: trouble detecting my network card

do correctly detect it. But I want to use > Debian. So is there any way to fix this? Easily? Install whole debian os and ricompile the kernel with correct ethernet module. Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

samba and files rename

y the file (all letters) the renamed is correct (Readme.txt) Why? I remember that old version of samba doesn't have this problem. Can anyone help me please? Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: samba and files rename

it changes the name in the server when I change really the name (from "x" to "othe name"). Ok, if i try to rename (from win host) the whole file then the rename is correct (i rewrite whole file) but if i rename only some letters don't happen. Thanks Pol -- To UNSUBSC

Re: need good file explorer

program(s). I run Debian testing but if something is not packaged I can always compile and install in /usr/local. Try kommander Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

(sftp) Received message too long 540096314

Hi folks, On my server I using debian stable. When I try do sftp [EMAIL PROTECTED], I can insert the password but I see: Received message too long 540096314 How can I resolve this problem? Thanks Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe"

Re: which videcard for dual-monitor setup?

which videocard is recommended if I want a system with 2 screens attached? I always used nvidia video card (with vga+dvi) or even 4 screens if that's at all possible. yep! it's possible :-) with 2 graphics card (vga+dvi) Regards Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTE

Re: MSI nVidia NX7600GT-T2D256E

Hello! I have this video card and set up the X Window to use the nvidia modul. Which nvidia's driver u used? I've the same problem with my nvidia geforce 5200fx, but if I use nv driver my X system is ok. Try to read on nvidia's forum. Pol -- To UNSUBSCRIBE, email to [

Re: problems installing etch: no HD detected

mmand. Or try daily netinstall snapshot. U might try with ubuntu live 6.10 (it doesn't install anything on hard disk) and check if ubuntu's kernel check your controller (and disk). So, u could understand what's the problem. Best r. Pol -- To UNSUBSCRIBE, email to [EMAIL

iptables (maybe) lan+ieee1394

1994 Client: eth0: --> lan1 --> server's nat --> internet eth1: firewire I hope I explain it in clear mode my problem. Thanks for any suggestions :-) Best R. Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Disk access.

> How I can find what processes access harddisk frequently, periodically > from ~20sec to ~20sec ? Hi, I'm not sure, try with lsof or fuser /dev/xxx Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Startup problem: sda/sde

e the password) , but often debian probe boot disk on sde and the startup stop :- In the bios of mb I see an option like this: "allow bios discover device - allow os discover device". I tried both but I've the same.. enervating.. problem.. Can I will do?! Thanks! Pol

raid 5/6 with different controller

Hi folks! I need some information about the raid 5 (or 6) using 2 different controller (one integrated in the mother board: 6 sata disks, and other pci controller with 4 disks support). Is there any problem about data security and/or performance? Is it a bad idea? Thanks :-) Pol -- To

Looking for howto/info about raid (5 and 6)

Hi all :-) I looking for howto/infos about raid software 5 and 6 :-) Now I've 6 disks on controller of mb and 4 on pci controller. If I'll change the controller with other (not same) can I've any problems? How raid known which disks are raid if linux change the address of /sd

Test with raid 6 software

e the same raid and maintan the data? Thanks Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Test with raid 6 software

o make a new raid and restore from backup. Is there another way to increase the security data? Thanks Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Error en la instalacion de Lenny

> La imagen de instalacion de lenny se cuelga al 65% en el punto de.. > Instalando " ssl-cert " try to kill the process that run ssl-cert Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Ipw2200 on Debian Etch

> Hi everybody, > There is someone that use the ipw2200 wireless interface with Debian > Etch that > can help me to install it? Hi Marco :-) look here: http://ipw2200.sourceforge.net/ i have a vaio laptop with the same your ipw2200 wireless port :-) Pol -- To UNSUBSCRIBE, ema

Kill tcp connection

Hi all :-) sometimes i see (with netstat -putan) a courier tcp connect active for several time i need kill this tcp-connect which tool i could use? Thank! ;-) Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Installation

on 250Mb drive?! > Also, the website is slightly confusing (I'm a first time Linux user). read the documentation, its written in several languages ;-) Best R. Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: hda: lost interrupt

Best R. Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

adduser (limit resource)

Hi everyone :-) i need add several user with limit resource as example: a user can use until 10% of cpu, 10% of ram how do this thing?! thanks :-) Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Debian Hardware Compatibility list for 3.1 r2

r_kernel and read the documentation about linux's support. > I need to know if a RAID controller > is supported before dishing out $1000 for 2 > of them. If u want know hardware support, u can search with google or read on the homepage of your raid controller Which hardware r

Re: eth0: flipped to 10baseT appears on login prompt

u read? Which kernel do u using? Try to update it. > You can get the login > prompt displayed again by pressing enter and everything works. Which ethernet speed go your system? Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Support for Intel 915GM 910GML Chipset Family

ade the desktop disappear altogether. Hi, try this: 915resolution - resolution modify tool for Intel graphic chipset Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Force kill a process?

art) or use tcpkill utility :-) Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

openvpn with debian stable

s for production of work. How can I resolve this problem? Thanks! Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: debian-40r3-i386-netinst.iso

> (163,392KB), but it fails to boot on any of the follwoing computers: dd if=debian.iso of=/dev/hdX (where hdX is cd-burn device ;-) Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

courier pop and losted mails

ptime. How can I probe where is the problem? Thanks! Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

spamassassin and signatures

Hi folsk :-) I've two questions: 1) Have you done a script for update the signatures of spamassassin? and 2) Is it usual (after an update of today) that the dir of signatures, has date febraury 25? thanks :-) Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "u

Re: Open Source Video Codec and Container (alternative to Xvid)

changing videos with Win, Mac > and Linux users? mhmh.. xvid/divx/mp3/ogg Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: 2.6.25 kernel on D820

> But with that kernel, the machine doesn't boot anymore. He can't find the > disks (/dev/sda* in my case) anymore. Is there initrd? Have you tried with make oldconfig? Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: alsaconf says "No supported PnP or PCI card found"

> alsaconf says "No supported PnP or PCI card found" Hi :-) I'm not sure, but I can try with module-assistant and compile alsa-drivers by yourself and try again. Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Debian GNU/Linux 4.0 r3 "Etch" – Official i386 NETINST Binary-1 20080218-14:15

> There's nothing wrong with the disk, since it was fine for the first > installation. Is 64 MB just not enough memory? Yep :-) debian installer needs almost 128Mb of ram :-( U can try with old debian (potato?) and upgrade to actually stable. Pol -- To UNSUBSCRIBE, email to [EMAI

apache-ssl (clients authenticate certificates)

Hi all :-) I looking for handbook, howto, others or any idea about the build the certificate (with apache-ssl) to install to browser of clients for authenticate themselves to a server. Something like pki? maybe? Can somebody help me? Thanks :-) Pol -- To UNSUBSCRIBE, email to [EMAIL

Re: Debian GNU/Linux 4.0 r3 "Etch" – Official i386 NETINST Binary-1 20080218-14:15

> May be, sarge or woody? I found this: http://www.debian.org/releases/stable/i386/ch03s04.html.en can u append some options to boot debian with lower memory. Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Samba with High-Availability

> Is there some how-to using samba with High-Availability ? domain master = yes preferred master = yes os level = 65 Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Cannot install xmms on Debian testing

e from another source > E: Package xmms has no installation candidate > sparky:~# It has removed about several bugs never corrected, try: apt-get install audacious Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Installing Debian

, sector 0 > By the way, this computer doesn't have a floppy. How time have you waited after these messages? It's possible that is only timeout.. Also try with the last debian installer: http://www.debian.org/devel/debian-installer/ Pol -- To UNSUBSCRIBE, email to [EMAIL PROTEC

Re: How do I enable UUID in Debian?

> Do I have to install a special package? No > > root=UUID=dd4927a2-e1f4-4955-8aa7-76a11d8c3aca init=/linuxrc ramdisk=8192 > Is this correct? Thanks in advance! yep times ago I been have the same problem.. U can look do: ls -l /dev/disk/by-uuid Best R. Pol -- To UNSUBSCRI

Re: Off subject question.

n > with out big security risk. ftp over ssh? vpn? Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: StartUp

r/.kde/Autostart) Pol Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Network Bandwitch incremental and less

> I recently installed Lenny on my laptop, the strange thing is that I > have the speed sheet dynamics I went from 60 Mbytes a few KByte. We've need other info. The internet connection is direct or you using a modem/router? Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a

Re: USB mouse not working, after installation Kernel 2.6.17

n Kernel? maybe :-) try with lsmod (or modconf) 4 add the right modules ;-) Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

/etc/rc2.d/ several links

Hey all :-) I have several doubt about several script into /etc/rc2.d In /etc/rc2.d read: dbus-1, dirmngr, binfmt-support, stop-bootlogd Are they really useful (or however) essentials?! They are that since installation of os. Thanks :-) Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED

video file information

Hey all :-) i need a program (or script) to do a check of information of video file (resolution, which codecs uses, etc) which program i could use?! thanks! ;-) Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

mailserver backup (hardware change)

asswd and whores homes for each? (and /etc/courier/) or I forgotten something?! thanks! ;-) Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: debian install with promise tx4310

i hope anyone can help me - either to tell it' s just > fakeraid -, or help. Hi, U can try with debian-installer here: http://www.debian.org/devel/debian-installer/ Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: creating incomplete mirror

rror" (or the equivalent) for clarify your problem :-) Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Can't ping

> Any ideas what's wrong and how to solve this problem? try to ping a numeric ip (google.com has address 64.233.167.99) check the route tables too Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: DLink DFE-530TX network card slower than other computers

sn't is a wireless network card, really? Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Login problem

edit /etc/passwd and displace the line /bin/bash(or other shell) with /bin/nologin or u can edit groups/users in /etc/ssh/sshd_config Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Sound Configuration problem on clean Sarge install

> desktop under Gnome configuration these don't work either. Hi, i dont use gnome but u can use alsa sound driver ;-) i dont remember exactly package, but u can search it with: "apt-cache search alsa" and install it u can use lspci to view which audio hardware do u have. how is the

Re: cups problem

> of CPU and memory. what says the cups's log? add the ip's clients in /etc/cups/client.conf and cupsd.conf e then restart it /etc/init/cupsys restart ;-) Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: kmail won't send attachments.

new user and send a email from that account (only for exclude a kmail problem) or try apt-get install kmail --reinstall Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

  1   2   3   4   >