Good day :-)
I've 8 sata disk on raid 6 software (debian stable).
For purpose test I stopped 3 disks of the array.
Now I rebooted and I tring to re-assemble the array but without successful..
mdadm -A /dev/md0
mdadm: /dev/md0 assembled from 5 drives and 3 spares - not enough to
start the array.
cat /proc/mdstat
Personalities :
md0 : inactive sdb[0](S) sdi[10](S) sdk[9](S) sdj[8](S) sdf[4](S)
sde[3](S) sdd[2](S) sdc[1](S)
3907091968 blocks
unused devices: <none>
Consider the data there are on the raid, and there aren't any disks
failure, is there a way to re-assemble the same raid and maintan the data?
Thanks
Pol
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
