.26 MB/sec
Timing buffered disk reads: 64 MB in 1.33 seconds = 48.12 MB/sec
sarge:
Timing cached reads: 196 MB in 3.38 seconds = 57.98 MB/sec
Timing buffered disk reads: 130 MB in 3.01 seconds = 43.22 MB/sec
Seems to directly relate to the issue? I dont know.
Thanks,
Simon
--
To U
Roberto C. Sanchez wrote:
Step 1. Switch to Postgres.
Life's far too short to waste time reading replies like that.
Why. I was serious. He has a database that is approaching 1 million
records. MySQL simply does not perform as well with large databases.
Thus, the most logical thing to d
unless I'm mixing previous facts about the servers). But maybe
somebody else here will have some more clues.
Thanks
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Marty wrote:
Again, I think you are searching in the wrong direction. Your 'hdparm
-tT' results clearly showed that the great difference between your
servers doesn't lie in hard disk performance (48 to 43 MB/s), but in
Memory/CPU performance (278 to 58 MB/s).
That would be a very gross miscon
Ron Johnson wrote:
The readahead on the Woody box is 8, it is 256 on the sarge box.
That's one difference.
Are both boxes only MySQL servers, and are you *sure* that the
Sarge box is quiescent when you run the test?
The sarge box is a production box, which runs the standard LAMP setup.
So it
Hi There,
Running Debian woody as a LAMP(PHP) server, on a AMD 1.5GHz, 512MB RAM
with software RAID1...
I have noticed high(ish) load averages (currently 2.08, last week it was
17!!), but there is no processes hogging the CPU, nor are we using any
swap... any ideas where to start with this o
Adam Garside wrote:
I have noticed high(ish) load averages (currently 2.08, last week it was
17!!), but there is no processes hogging the CPU, nor are we using any
[snip]
Check the output of ps(1) and look for processes in the 'D' state.
Nothing there. All seems fine.
Also,
check I/O wit
he same three lines below and makes no reference to the 2610sa)?
thanks for any help,
simon
excerpt from aacraid 1.1.5-2326's linit.c
...
{ 0x9005, 0x0285, 0x9005, 0x0290, aac_rx_init, "aacraid", "ADAPTEC
", "AAR-2410SA SATA ", 1 }, /* AAR-2410S
post, just to mention that please?
thanks for any info and much appreciated,
simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ontrolled by an adaptec 2?10SA controller, or knows that this has
actually been done (ie. the debian-installer recognized the card or you
loaded a driver), would you reply to this post, just to mention that
please?
thanks for any info,
simon
Simon wrote:
hi,
I'm hoping to install sar
ing, but only
write to htdocs/.
Does anyone have any suggestions on how to get around the above problem?
How do i allow users to create files (with PHP) with the user of
www-data, but still restrict some other directorys from writing?
Is this a bad thing in the first place?
Simon
--
T
new install?
Thanks
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Simon wrote:
Hi There,
Im installing a new server to replace one of our old ones. Its a
LAMP(PHP) server, so i am installing a nice fresh version of sarge. The
old server was running sarge as well...
Is there an easy place to get a list of installed packages... To make
sure that i dont
://www.nzlocal.com/simon/screen.jpg
Otherwise, ANY IDEAS?
Thanx
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Kent West wrote:
Simon wrote:
I remember seeing a thread some years ago about a "stuck" shift key.
Turns out there was some command or keystroke that caused the terminal
to interpret everything in upper-case. The purpose of this capability
was to work with some older (antiquate
Simon wrote:
Kent West wrote:
Simon wrote:
I remember seeing a thread some years ago about a "stuck" shift key.
Turns out there was some command or keystroke that caused the terminal
to interpret everything in upper-case. The purpose of this capability
was to work with some older (
loaded
Jun 24 12:39:56 web1 input.agent[3950]: evdev: already loaded
Jun 24 12:41:53 web1 kernel: psmouse.c: Wheel Mouse at
isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
Thanks for any insight...
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Running sarge (2.6.8-2-k7-smp) on a dual athlon MP on a tyan tiger
mobo... I am getting this error every now and then...
Jun 23 21:27:55 web1 kernel: APIC error on CPU0: 00(02)
Jun 23 21:27:55 web1 kernel: APIC error on CPU1: 00(02)
Is this something to sorry about?
Simon
--
To UNSUBSCRIBE
Hi There,
I have a debian sarge box with 2 network card as eth0 and eth1 (funny
enough!).. eth0 is the default on one subnet (a single IP) and eth2 on
another (listening to multiple IPs).
The problem is that i can ping eth0's IP, but not eth1's... but it shows
up on the box as up and i can p
Jacob S wrote:
What is the chipset on eth1 and what driver are you using for it? (Not
saying that I have the answer, but you are more likely to get one if you
include that information.) You might also copy/paste the output of "cat
/proc/interrupts".
You may have a driver that a) is buggy b) d
Bob Proulx wrote:
Simon wrote:
I have a debian sarge box with 2 network card as eth0 and eth1 (funny
enough!).. eth0 is the default on one subnet (a single IP) and eth2 on
another (listening to multiple IPs).
s/eth2/eth1/ ??
Should have been eth1. Sorry.
The problem is that i can
Michael Bellears wrote:
tcpdump -n -i eth1
This is pinging from my home IP address to the offending
server behind our router... The packets are clearly getting
to the box, but i get no ping back to home.
Your linux box is using the other NIC for gw.
Add a static route for your home net t
want to make sure i have it correct.. can
someone confirm for me?...
iptables -F
iptables -A INPUT -i lo -j ACCEPT
iptables -N SPOOF
iptables -A SPOOF -i eth1 -j SPOOF
Is this correct - or have i got it ALL wrong.
Thanks
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Marcelo Chiapparini wrote:
Hi all,
I want to install sarge in a Sony Vaio PCG V505 EX laptop. I didn't find
anything about it in the list. Besides, in the site
http://www.linux-laptop.net/ there is only information about woody and
gentoo on a Vaio PCG V505 BX... Does anybody in this list hav
need to install Sun's jdk1.3/jre1.3 (http://java.sun.com) from
the tarball and set up your $JAVA_HOME, and maybe $PATH, to point to it
(mine is in /usr/local/sun-java/).
HTH,
Simon
t to try and remove
then re-install Gnome (I don't want Helix back) and if so, how can I
do this.
Any suggestions would be very welcome.
ThanksSimon.
--
Simon Hooper
GnuPG 1024D/F3D1353A 64AF 1419 4B67 CE13 E312 7C80 CFB0 9414 F3D1 353A
pgpwz6dYID0Iw.pgp
Description: PGP signature
ng apt-get -f install just produces the error I posted
before.
I think I need to do some reading on apt... any help in the mean time
would be most welcome :)
Simon.
--
Simon Hooper
GnuPG 1024D/F3D1353A 64AF 1419 4B67 CE13 E312 7C80 CFB0 9414 F3D1 353A
pgpM1I4ZNZNhw.pgp
Description: PGP signature
#x27;ll try Windowmaker now.
Simon
--
Simon Hooper
GnuPG 1024D/F3D1353A 64AF 1419 4B67 CE13 E312 7C80 CFB0 9414 F3D1 353A
pgpQKd1kSOClj.pgp
Description: PGP signature
x27; is what you're looking for.
Simon.
--
Simon Hooper
GnuPG 1024D/F3D1353A 64AF 1419 4B67 CE13 E312 7C80 CFB0 9414 F3D1 353A
pgpcZk3orkDRb.pgp
Description: PGP signature
7;t time to
try it myself but this may be your answer.
Otherwise, you can use 'loadkeys uk' replacing uk with the country
code you desire.
I hope this helps.
Simon.
--
Simon Hooper
GnuPG 1024D/F3D1353A 64AF 1419 4B67 CE13 E312 7C80 CFB0 9414 F3D1 353A
pgpff48zpxjLB.pgp
Description: PGP signature
's wrong.
I haven't used the kernel drivers, but I have used the snapshot
drivers via ftp from opensource.creative.com. This work perfectly with
2.2.18 and 2.4.2 kernels. I would recommend you follow these drivers
to get more functionality out of your sound card in the future.
HTH Simon.
specific, and I haven't tried it myself but it seems a good
explanation of the process.
HTH
Simon.
--
Simon Hooper
GnuPG 1024D/F3D1353A 64AF 1419 4B67 CE13 E312 7C80 CFB0 9414 F3D1 353A
pgphKZ17jqrBj.pgp
Description: PGP signature
to the Howto's and software required.
http://lhd.datapower.com
You should also check out the SANE website for further information
http://www.mostang.com/sane
HTH
Simon
--
Simon Hooper
GnuPG 1024D/F3D1353A 64AF 1419 4B67 CE13 E312 7C80 CFB0 9414 F3D1 353A
pgpujQSX8tlEu.pgp
Description: PGP signature
/dpkg returned an error code (2)
Is there a command to clear this or something? Thanks
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi There,
Is there a way to set network cards to full duplex at boot time?
Thanks Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi There,
We are trying to install debian etch onto our Inspiron 530 that has a
SATA DVD drive, but the installer cannot detect the CD drive once it
is booted. How do i move forward here?
Thanks
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe"
On 9/26/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> Quoting Simon <[EMAIL PROTECTED]>:
>
> > Hi There,
> >
> > We are trying to install debian etch onto our Inspiron 530 that has a
> > SATA DVD drive, but the installer cannot detect the CD drive on
Hi There,
We have a sarge box that we have just installed php4-cli on, but there
seems to be no mysql support? Can anyone confirm this? I have
php4-mysql installed.
What can i do here?
Here is the Configure Command from phpinfo() with the command line client.
Configure Command => '../configure
ks for any input
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On 6/28/06, Jo Shields <[EMAIL PROTECTED]> wrote:
You've run out of RAM.
Hmm... Could this be some sort of memory leak or something? Would
anyone be able to offer any path of checking or solving this issue?
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
On 6/28/06, Derek Martin <[EMAIL PROTECTED]> wrote:
On Wed, Jun 28, 2006 at 09:37:07AM +1200, Simon wrote:
> On 6/28/06, Jo Shields <[EMAIL PROTECTED]> wrote:
>
> >
> >You've run out of RAM.
> >
>
> Hmm... Could this be some sort of memory leak or
On 6/28/06, Derek Martin <[EMAIL PROTECTED]> wrote:
On Wed, Jun 28, 2006 at 09:52:42AM +1200, Simon wrote:
> OK, i had to restart the server as there was critical services running
> on it... After rebooting and running the commands above:
Unfortunately it's too late... To se
Kernel 2.6.8-12-em64t-p4-smp
On 6/28/06, Hemlock <[EMAIL PROTECTED]> wrote:
On Wed, 28 Jun 2006 09:07:02 +1200, Simon wrote
> Hi There,
>
> Can anyone have a look at this screenshot and give me a glimmer of
> what is going on here?
>
> This server is responding to pin
Am 15.07.2008 um Uhr haben Sie geschrieben:
> Where can I get this for sid?
you can get the gnomepanel 2.22 from experimental
the nautilus 2.22 is there, too
regards
simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe".
Trouble? Contact [EMAIL PROTECTED]
Hio,
[EMAIL PROTECTED]
REQUEST
regards
simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
- Integrated Light Path Diagnostics
- Integrated Ultra160 SCSI controller
- 1x 10BASE-T/100BASE-TX Intel Ethernet controller
- PS/2 Mouse & Keyboard ports
- VGA Port 8 MB SDRAM
- 2x 100 MHz/64-bit PCI-X
- 4x 66 MHz/64-bit PCI-X
- Six hot-swap fans
- 3x 370 Watt Hotswap power supplies
Thanks
S
Wulfmann,
No, not the mainframe :)
http://www-132.ibm.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=-840&storeId=1&categoryId=2344267&langId=-1&dualCurrId=73
On 7/25/06, Wulfy <[EMAIL PROTECTED]> wrote:
Carl Fink wrote:
> Quick poll: how many people here are old enough to read that
think).
Im wondering if this could be done with netfilter somehow? or some other way?
Moving mail and DNS is easy as i can use pedrition for the mail proxey
and just run dual name servers until they are sorted as they are low
overhead anyway.
Any input is appreciated.
Simon
--
To UNSUBSCRIBE
On 7/26/06, Brent Clark <[EMAIL PROTECTED]> wrote:
Simon wrote:
> I need to move our web server to a new IP range. This is hosting
> around 300 websites, about 250 on 2-3 IPS (standard name based virtual
> hosts) and the rest on their own IPs (SSL hosts). All running on
> apa
-1121516.html
Thanks
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
/TIPS0054.html?Open
I would really appreciate any input here, esp from anyone from IBM on this list?
Thanks
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
! Simon
sda: Current: sense key: Aborted Command
Additional sense: No additional sense information
end_request: I/O error, dev sda, sector 390721792
ata1: EH complete
ata1.00: speed down requested but no transfer mode left
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: tag 0
Hi There,
How do i configure syslog to only log mail to mail.log. The default
debian postfix logs to mail.log and syslog at the same time with the
same data.
Thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
OK.. So i was in my /root/ directory and put just one too many "."s in
the line... Now i have a lot of files that i own!!
I think the term is "DOH!".
Is there any way to fix these?
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe&
istance is VERY VERY much appreciated! a we are trying to migrate off
this server and its holding everything up.
Thanks
Simon
Hi There,
We have a fresh install of lenny on a VM and tried to perform the initial
apt-get update/upgrade but are having issues with dependency problems. Can
someone point me in the correct direction here please?
Thanks
Simon
# apt-get upgrade
Reading package lists... Done
Building dependency
your trying to target , so that I
can send you more information.
Looking forward to hear from you.
Best Regards,
Simon Lee
Marketing Manager
Tel: 302-251-8219
To remove from this mailing: reply with subject line as "leave out."
ely, I now
realise that the dir I created gets removed upon a reboot.
Could someone let me know the correct way create an application-specific
directory in /var/run (if that is the right thing to do).
Thanks,
Simon
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, Oct 25, 2015 at 04:27:10PM +, Simon wrote:
Hi All,
Using Debian 8 and I'd like to run rsnapshot as a regular (non-root)
user but it doesn't have permissions to drop the pid file in
/var/run.
I created a directory called rs
, I've always viewed Linux as 'the peoples' choice for
an OS but watching these responses has made me think/realise that it's not
really. Its development is driven by the biggest financial contributors - which
will always be the corps. Due to it's open nature it is perhaps more
susceptible to abuse/conflict in this area too. I guess I've been a little
naive to that till this whole sysd thing.
--
Simon
oot to restart (ctl-alt-del dosnt work). Here is a
screenshot of the stuck screen (no ping, nothing at this point):
http://gremin.orcon.net.nz/console.jpg
Would someone be able to take a look and give me a clue here?
Simon
On 4/6/06, listrcv <[EMAIL PROTECTED]> wrote:
> Simon wrote:
> > Hi There, We have a mail server (postfix>amavis>dbmail) running debian
> > sarge (2.6.8-9-em64t-p4-smp) running dual xeons with a tyan
> > motherboard and 3ware hardware raid5. Everything has been r
! I suppose i would want:
1stly: Central reporting for all servers (updates etc)
2ndly: A way to then apply those updates
With a bit of thought, i could get something up and running myself i
supose, but i just wondered if there is anything already before i do.
Simon
Hi there,
Im trying to debootstrap ubuntu from debian (for a Xen domU)... how do
i go about this? Is it possible?
Simon
card kicking back in after it has been in dpms powerdown
mode.
Thanks
Simon
Hi There,
We are seeing a large spike in load average on our web server (from
0.xx to 10-15.xx) but there does not seem to be anything hogging the
CPUs or anything... Am i missing something here? What can i do to
check other issues.
Thanks
Simon
top - 15:33:25 up 5 days, 5:28, 1 user
someone be able to give me an example of running two or more
instances of mysql nicly on debian?
All boxes are running sarge.
Ta
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi There,
Can someone please point me in a godd direction to create a ramdisk in
debian sarge?
Thanks
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
enough to
detail how or point me to any good resources?
Thanks
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi There,
We have a one of our servers producing a "sensord: Sensor alarm" in the
syslog. Its a dual athlon box and here is the output of #sensors:
(Any idea of whats happening here? Im sure that there is no case sensor
web1:/proc# sensors
w83627hf-isa-0c00
Adapter: ISA adapter
VCore1:
1000 MHz. WTF?
Thanks in advance.
=
---
Simon Tod
[EMAIL PROTECTED]
__
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com
--
To UNSUBSCR
>
> check the results with
>
> > cat /proc/cpufreq
>
> If you have multiple processors, you should find
> them under
> /proc/sys/cpu/[0-9]+
>
> by the way, you can also cat speed, speed-min and
> speed-max
>
>
>
> > -Original Message-
tput in the attached file. How
does this help?
--- Russell Shaw <[EMAIL PROTECTED]> wrote: >
Simon Tod wrote:
>
> >Thanks. Got the cpu speed bit solved.
> >
> >Looking through the PCMCIA HowTo I've checked to
> see
> >that /etc/pcmica/config, /et
tput in the attached file. How
does this help?
Opps. Forgot to attach the file last time :-0
--- Russell Shaw <[EMAIL PROTECTED]> wrote: >
Simon Tod wrote:
>
> >Thanks. Got the cpu speed bit solved.
> >
> >Looking through the PCMCIA HowTo I've checked to
> se
oblem... the same comment appears
again and again in the output
Hint: insmod errors can be caused by incorrect module
parameters, including invalid IO or IRQ parameters.
What's that all about?!
--- Russell Shaw <[EMAIL PROTECTED]> wrote: >
Simon Tod wrote:
> > Surel
--- Russell Shaw <[EMAIL PROTECTED]> wrote: >
Simon Tod wrote:
> > So why can't modprobe find any of the modules - if
> > indeed that's the problem - cause they're
> certainly
> > where they're supposed to be.
> >
> > Looki
anyone the same problem or has
> anyone some hints to solve this problem?
Yes, I have the same problem...
wmweather works perfectly,
but the new kweather does not.
Greets,
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
if
the version number has changed? Or do I need to do something special
after installing the from-source package? This happens with every
package, I tried 9. I am using an up-to-date sid.
Thanks, Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe"
ir page and get a 2nd copy of that page. For example when I
> run pinfo and scroll towards the bottom of the page I can get the
> following:
less /usr/share/info/dir
Is it duplicated within? If so, you may want to hand-hack it.
Simon
--
To UNSUBSCRIBE, email to [EMA
On Thu, Feb 20, 2003 at 05:48:18PM -0300, Julio Diaz wrote:
> Can anyone recomend a good program to pkzip and pkunzip files in kde?
Use ark. It ships with KDE.
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ite happy with removing all
KDE... but is it actually going to work?!
Why do I need xlibs from testing when it hasn't been
mentioned in any dicussion of this backport (I think)
and might it be something to do with having the
*wrong* version of xfree86 4.2.1?
Thanks.
Simon.
=
--- "Harley D. Eades III" <[EMAIL PROTECTED]> wrote: >
Simon Tod wrote:
>
> > --- James Strandboge <[EMAIL PROTECTED]>
> >wrote: > The mirrors listed at DebianPlanet.org and
> >
> >
> >>gnomedesktop.org have now
> >
--- James D Strandboge <[EMAIL PROTECTED]>
wrote: > On Fri, 2003-03-14 at 05:32, Simon Tod wrote:
> >
> > Depends: libgtk2.0-0 (>= 2.2.1) but 2.0.9-1 is to
> be
> > installed
> > Depends: libpango1.0-0 (>= 1.2.1) but 1.0.5-3 is
> to be
> &
sions of mozilla have a switch for that, and maybe some prefs.js
editing could do it on 1.0.
Simon
* Dave Sherohman ([EMAIL PROTECTED]) [030321 17:42]:
> On Fri, Mar 21, 2003 at 10:57:19PM +0100, Torquil Macdonald wrote:
> > Does anybody know how I can, without having root privilege
miserably.
Any ideas on how I get the network to function
under 2.4?
Simon
Simon WindsorEmail: [EMAIL PROTECTED]Tel:
01454 617689Mob: 07720 447385--
This message has been scanned for viruses and
dangerous content by
MailScanner, and is
believed to be clean.
Mailscanner thanks transtec Computers
10)
01:00.0 VGA compatible controller: S3 Inc.: Unknown device 8d04
- Original Message -
From: "Rus Foster" <[EMAIL PROTECTED]>
To: "Simon Windsor" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, October 15, 2003 11:36 PM
Subject: Re: Up
Hi
Thanks to all who helped, networking is working, all I had to do was add
8139too to /etc/modules.
Many thanks,
Simon
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Mailscanner thanks transtec Computers for their support
, and checked
the settings against another debian server outside the firewall, and still no
joy.
FTP, ssh and ping all report
No route to host.
Any ideas ?
Many thanks
Simon WindsorEmail: [EMAIL PROTECTED]Tel:
01454 617689Mob: 07720 447385--
This message has been scanned for viruses
Hi
Many thanks for all the advice. The cause of the problem was a typing
error, writng 82 as 83. I only spotted this when a preparing a reply.
Many thanks
Simon
Monique Y. Herman wrote:
On Sat, 18 Oct 2003 at 20:42 GMT, Simon Windsor penned:
This is a multi-part message in MIME format
Me too. I usually use Meta-Left and Meta-Right to shift workspaces, so
it's not to much of a problem. I noticed that if I click at the very top
left of the left workspace the windows go back to normal. It's a bit
annoying though.
-- simon
On Mon, 2003-10-20 at 09:07, Ryan Nowako
problem. Even worse, german education has
dropped so much during the last 2 decades, that many natives have
severe difficulties in choosing the right tense or declination. On the
other hand, an interested student can master most of german grammar
within 6 to 12 months, from where on german actuall
he two?
Thanks!
=
---
Simon Tod
[EMAIL PROTECTED]
Want to chat instantly with your online friends? Get the FREE Yahoo!
Messenger http://mail.messenger.yahoo.co.uk
--
To UNSUBSCRIBE, email to [EMAIL P
r what alternative approach I could
take would be much appreciated...
Thanks!
=
---
Simon Tod
[EMAIL PROTECTED]
Want to chat instantly with your online friends? Get the FREE Yahoo!
Messenger ht
whether or not this may be a
safe thing to do or what alternative approach I could
take would be much appreciated...
Thanks!
=
---
Simon Tod
[EMAIL PROTECTED]
Want to chat instantly with your online
5hbnl_JnBfY2F0X2x2bDE9fmFueX4mcF9zb3J0X2J5PWRmbHQmcF9wYWdlPTE*&p_li=
Works well for me.
-- simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--- David Z Maze <[EMAIL PROTECTED]> wrote: > Simon
Tod <[EMAIL PROTECTED]> writes:
>
> > After a hdd install from knoppix 3.2 I tried to
> dist-upgrade to
> > Debian unstable. It all seems to work fine but my
> debian_version is
> > still reported as t
riously mess your
system up...
If you think you might want to upgrade other packages
in the future - and why not, Woody is *old* and most
people happily run Sid on their desktops - you should
look at dist-upgrading to Sid
HTH.
> --
> Joe Rhett
> Chief G
py the old
config to /usr/src/linux/.config, run 'make oldconfig'
then 'make-kpkg --append-to-version=.my_kernel
kernel_image'.
You might want to look at using 'make xconfig' to get
pop up a GUI to help with the configur
sic?
> Old Rockers still on tour are pathetic, but old
> Country singers
> are still great.
>
Yep, that'll do fine. It'll create the dir
/usr/src/modules if it doesn't already exist and stick
the source code in it, so that make-kpkg module_imag
r/cache/apt/archives/ftape-util_1%3a1.09.2002.03.21-0.3_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code
(1)
How do I fix this??
Thanks.
=
---
Simon Tod
[EMAIL PROTECTED]
Want to chat instan
1 - 100 of 1345 matches
Mail list logo
