uter you can assign static
IP addresses to your computers on your network. Even though your ISP
is DHCP but I am sure you are very aware of that.
My ISP does not support Linux, but I really do not have any problems
with it working straight out of the box. If it is a problem it usually
is with m
post her
vital info so it wil be worth my time, those new AMD 64 boards look
good.
Anyway I get a kick out of what some people post by mistake, or is their
such a thing as posting a mistake to a Mailing list? It might be nice
to see what some peoples thought process is.
I guess I have wasted enou
od to have more than one way to search for Debian packages.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
pass when using modconf? If you want all of Dmesg, or other log
files I will be more than happy to supply them.
Thanks;
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Wednesday 01 October 2003 01:10 am, rthoreau wrote:
> Dear: fellow Debian users;
>
> I am having a problem setting up my Atapi Iomega Zip drive under
> Debian. I have followed the Zip disk howto, and have done all its
> suggestions but I am still not able to have the device work
ght with my hardware detection.
With all the custom kernels I compile I should at least have it show up
in dmesg. So in a way it makes sense if the kernel does not see the
drive no mater what modules I try to load at boot time then I am unable
to use the drive. I know that I could just install knoppix to my
harddrive and be done with it, but I should not have to due this as
both are based on Debian.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
bug.
http://www.theinquirer.net/?article=11994
I don't know if I should laugh, or cry, or laugh myself to crying.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
sample group. It just shows that most people
who visit their site make good decisions, or like OSS and Debian is
more inline to FSF than a lot of other distro's.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
velopers will
reply with the inn's and out of why you need the patch. If your
going to be using Debian source, change your etc/apt/source.lst to
include testing so you can pull in the proper software.
Anyway tell us how you like the Kt400 chipset under Debian, a buddy of
mine is look
on, I would like to hear a little more than , its faster I
would like to get some fine details.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
in I
will take the Linksys back for a refund. I have read good reviews
about this brand, and products which seem to be industrial quality,
for reasonable prices. You can check out the webpage and a few other
sites that cater to Wifi.
http://store.zyxel.com/usshopcat/product_info.php?cPath=24&products_id=133
http://wifinetnews.com/
Good luck with your decision;
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
things better. I also thought it
was a no/no to refer to a name within a name without a definition?
How can I understand RMS when I don't even understand GNU?
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
put a midtower case and
a WiFi card next to the TV but my wife wouldn't want a beige case
sitting next to the TV, also WiFI will be slow to move files on the
network. But once again the wife does not like cables, or anything
extra by the TV that looks out of place.
Rthoreau -> d
houldn't be two hard to accomplish.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
of Gentoo vs Debian, I would be more than happy to put
Gentoo on a box.
But I won't hold my breath!
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
a box make sure your tv card supports Linux,
also it wouldn't hurt to search out PVR on the net, and also DVR
becasue they are called different things by some people.
Anyway good hunting and good luck with your project.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
6 Gig
Pentium M Centrino. But that is only on when my wife is plugged in,
and the laptop is off most of the time.
catch you later;
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
u time, and is a ton easier than having to switch between
workspaces, or minimize windows.
If you want to know more about dual or more monitors you might want to check
this site out.
http://www.realtimesoft.com/multimon/gallery.asp
This points to the gallery of people who sent in pictures of their
do
search on google pass it along the pdc 20269 search line, it seems like some
people have a love hate relationship with this card. I do have this card but
my dual motherboard hates it, and is now in windows only system.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
code:0) 66.61.123.234 66.61.118.206 ACCESS BLOCK
17
If this is common would someone please point me to a source to get more
information.
Thanks;
Rthoreau at iwon dot com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I keep
getting those recorded in my log.
I could understand if the destination was my router, or a machine under the
subnet but it is not. Also the source machines seem to change unlike the
destination machine.
That is the reason I wanted to ask all of you, I really do not know why this
is
shown. I would certainly make sure soundcore module was loaded as
to the 3 procs I really couldn't tell you as I am unsure exactly what the
soundcore module does.
Hope you get it sorted out, as the sound card is great, I just wish it was as
good as under the other OS.
Rthoreau
--
To
idered a bug, and should I submit a bug report if their is no
way to set map function in menu.lst.
Thanks,
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
nd process, then change user,
or close xterm window. I would like to fix this problem if it is
fixable, also I do not use any other mp3, or wav player, as xmms does
all that for me.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
disk. As stated early in
this thread K3b uses growisofs, so a little cmd line should not hurt
anyone. I must admit the dd method is very slick, but what I really
need is something that can join two bin/cue files, or more, to fit on
a dvd+-rw media disk, and be played in a stand alone dvd p
t
totally screwed up my /etc/fstab file, once I fixed it by hand, and
did not let K3b setup use it again, still could not detect my cdrw
right, even though I used the other options in K3b.
Rthoreau
(>=
2.7.1), liborbit2 (>= 1:2.10.0), libpango1.0-0 (>= 1.6.0), libpopt0
(>= 1.7), libsm6 | xlibs (>> 4.1.0), libtasn1-2 (>= 0.2.8), libx11-6
| xlibs (>> 4.1.0), libxml2 (>= 2.6.11), zlib1g (>= 1:1.2.1),
mkisofs, cdrecord, nautilus
Dang thats a lot of depends,
.233.161.104/search?q=cache:lwmxIKqlJjwJ:applications.linux.com/print.pl%3Fsid%3D04/11/16/1555246+growisofs+%2B+bin/cue&hl=en
http://fy.chalmers.se/~appro/linux/DVD+RW/
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
r files as a general
backup, against corruption. Unless you make a backup copy of the rar
files, or keep good back ups. Most people that I find do not do this,
they assume that their archive will be intact, and forget to backup.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subje
er KDE, if you make an icon you can choose the
application associated with that file. So every time you open the
file it will use that application. Check the control center see if
you can set it globally, if not then set it per application.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
l begin anew. So if you already
have Sarge in your source list you won't need to worry. That is
unless you want to follow testing, then it will be some time yet.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ndreas, Karsten, ie all you die hard users. I know I have
left of some the old timers out, sorry, I haven't been around that
long, going on a year, just a spring chic to some of ya.
Thanks;
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ic. Usually if the Linux kernel will support it Debian will too, you might
have to
update your kernel to do it, but it usually works. If you find woody lacking you
might want to try some
packages from testing, or unstable, most new kernels can be found their.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
y can be installed if you do not have your drives on the card,
then you can upgrade the kernel.
www.debian.org/devel/debian-installer/
Will get you started with the testing, or Sarge information.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Tue, Jan 20, 2004 at 09:11:04PM -0800, David wrote:
> Any reccomendations for wireless router hardware. Went to Costco today
> and they had both D-link router+wireless card (802.11g) as well as a
> netgear package. Both packages advertised being compatible with linux.
>
> Any input/advice/opi
get Ati working
you need to download the latest XFree86 build, go to certain sites for certain drivers
other such things. While Nvidia you visit their site download their latest driver,
make sure you have kernel-headers and run their script.
Be that as it is, I still give Nvidia a big edg
ime,
--> though.
>
> --
--> Colin Watson [EMAIL PROTECTED]
That is great news, so Gnome 2.4 will be a full meta package, does it include
everthing?
What about kde 3.1.4 will it be next?
Keep up the good work, how long until a proper freeze in testing?
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
thing, you might
be better off getting the source from CVS and building your own packages, or
installing it yourself. In fact at the rate of kernel development a release
candidate is out almost every week or so. I hope you have good backups of your
software, so you know exactly what breaks you
e the DRI section.
If you can not unset the framebuffer you might need to rerun the base config
setup again. This should get you up and running, if not give google groups a
try, it has a lot of information about this.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subje
nd it.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
more rare because most people use windows for the
reviews. use googles linux page for a start. www.google.com/linux it gives
you a little tux and is specific to linux.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
. Some Fax drivers are spotty, that is if your getting an all in
one with fax support.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
, and other support sites that cater to linux device
support.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
what the
difference is?
I would like to see a basic Debian package vs Gentoo Emerge package on the
same system comparision.
Anyway hope I haven't gone two much off topic, just curious.
Rthoreau
I like top posting, that is what headers are for!
--
To UNSUBSCRIBE, email to [EMAIL PROT
o /etc/modules so they get loaded
with the others.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ce I really do not want to use CVS .0.4.4 because it would have to be
installed by hand. I really would like to stick with an apt-get source. If
you need anything else let me know.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I do not know what version of Konqueror you are using, but in version
3.1.2 you can find popup blocking under JavaScript at the very
bottom. It does work well, I know its in a weird place but it does
work.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
e already done, I changed the
contrast and played with the config files again but to no avail.
I then used netstate -a |grep 13666 and watched the port 13666
conection, which took both connections. So I decided to download
another LCDproc client and ended up with netlcdclient which gave me
t
On Monday 21 July 2003 16:18, Rthoreau wrote:
> On Wednesday 16 July 2003 14:45, Rthoreau wrote:
> > On Saturday 12 July 2003 23:24, you wrote:
> > > I have a CrystalFontz 20x4 lcd without keypad, that I am trying
> > > to get LCDproc setup on.
> > > I am usi
mium on their boards, you might be able to find
the same chipset on an Aopen or MSI for less, sometimes for as much
as 20 US dollars less.
Anyway search the LKML for chipset support, and also google groups for
the same. But VIA does seem to be on the ball for linux support of
their chipsets.
se google and look up fdisk, cfdisk
howtos which might give you some ideas.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ve to wait until a future bus is implemented? Have any of
you played arround with cabling, and motherboads to solve this
problem?
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
at it might not work even if someone uses
the -immed flag. Does not figure verywell in my book, I understand
that this program is one of the corner stone applications of linux,
but maybe we need to question some of these programs to make sure
they become even better.
Thanks;
Rthoreau
--
To
ember to
fill out the installer report to give feed back to the installer team so we
can get closer to a final release.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
eck is going on,
doesn't murphy serve all the mailing list's? What makes digest so special if
it is murphy? Is it the collecting of the messages then posting them, ie the
digest aspect?
rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
r drivers. What does lsmod show under knoppix, then
compare this to what your says in Debian.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
use in a console
window. If that is the case search the list, or google for gpm setup.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
d you turn off frame buffering, I have an old Nvidia card that everytime I
use frame buffering it will crash with a similar message, even if the device
section is correct. Also look at the obvious Device section see if your
BusID is correct. Also try a regular Vesa driver, see if you get screen
worked in mine, but Tyan does not support the
FX series on my board. http://forums.pcper.com/showthread.php?t=265196 since
then I switched back to a geforce2, that I rebuilt, put that ultra in a
single cpu system, which is used to play Doom3.
As far as knowing a silver bullet for fixing DMA in 2.4,
ve cds are great to verify hardware
setup, so you could give them a try. It might just be eaiser to just apt-get
a kernel image and give it a try.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
or common files and
programs. It seems that you need to use the right tool for the job, and
frankly I don't see dpkg -S as a good solution. It works for packages that
dpkg knows about. But then that could be said of the same for rpm -qf.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
83.phil.east.verizon.net
[141.151.76.183]) by prdmx8.nwk.iwon.com (Postfix) with SMTP id
3BC193402A
for <[EMAIL PROTECTED]>; Mon, 30 Aug 2004 15:13:28 -0400 (EDT)
Date: Mon, 30 Aug 2004 15:30:21 -0500
To: "Rthoreau" <[EMAIL PROTECTED]>
From:"Debian-user" <[EMAIL
> On Wed, 2004-09-01 at 10:20, Richard Lyons wrote:
>> On Wednesday 01 September 2004 14:17, Rthoreau wrote:
>> I got this in one of my spam accounts, and thought it was a little
>> weird.
>> [...]
>>
>> Yes, I've had a few recently.
>>
at,
http://lcd4linux.sourceforge.net/.
Thanks;
Rthoreau
-
./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
ch
it likes.
lcd4linux, lcdproc are problem childs on this setup. I guess I need
to hit the mailing lists and see what I can dig up, so far its not
looking good. I did find another 634 user with simillar problems as
me but no solution.
Thanks;
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
n Testing/Sarge
with current updates.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
er
open source tools, to RAR.
If you did have the recovery volumes you could just use the r option
for repair, but as No Spam, PJ said you might have to download it
again. Or maybe No spam, PJ could create some recovery files, and
email them to you since he already has a working copy.
oes not work on that screen. But if you change to
a different VC you have total mouse control. Anyone notice this,
yes X is not running, I was configuring gpmconfig as root, thought I
had messed up the settings again. Maybe someone should file a bug
report, or is this a feature?
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
be better off installing Windows XP, or maybe, just maybe
installing Debian since this is a Debian mailing list.
Also Direct 3d is a Windows only graphics layer, Whats wrong with using Nvidia
Linux drivers, and OpenGL, do some research, a lot of people have gotten their Nvidia
Chipsets
to work in Linux.
You might also want to post to a VMWare mailing list about your VMware problems.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
headers and you
think it is comming from the list. Also did you do a whois search on the recieved from
IP?
This is also a Debian mailing list, maybe you have subscribed, and others are getting
hit
by Mydoom worm, and your getting off topic mail because of it?
Rthoreau
--
To UNSUBSCRIBE, ema
4.6% growth,
Redhat only had 17.8% growth.
We are behind total servers though, Redhat has 1,451,505 Debian has 442,752
which is not bad, third in the list.
Lets hope that more people will realize just how good Debian is as a server
and help out the community.
Rthoreau
--
To UNSUBSCRIBE, email to [EM
your local whitebox builder, and ask if you
could hear some of their case fans, HSF's in action. That way you will know what
to expect, maybe they could give you some idea's to what has worked for them.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ding
of the documents to get it just right, but it will be worth the effort.
I haven't had any problems at all with my MultiFunction HP printer after installing
the proper
Linux drivers. In fact scanning works better in Linux than in Windows.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ion Reform
> Act of 1995, including, but not limited to, statements concerning
> manufacturing, marketing, growth, and expansion. Such forward-looking
> information involves important risks and uncertainties that could affect
> actual results and cause them to differ materially from expectations expressed
> herein.
>
> 6 Eftute Ave
> Kingston 10
> Jamaca WI
>
What does this have to do with Debian? Why not post AMD's, or Intel's forecast?
Why not make a list of compaines that are friendly to Linux, and OSS so I might
be able to invest in them?
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ervers, such things. But its just easier to point
them to the Usenet and a paid Usenet server company. Chances are you might not have
the stuff
they want anyway.
So why would I need to be quiet? What is at risk, I can tell you its not Usenet!
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
then I am all for it. Is it right to
deprive a person who might not have the means for the tools, to make their life better?
Are the RIAA, MPAA others loosing tons of money in the process, I don't think so. Do
you
see Microsoft loose the shirt off their back, No.
Ok I am sorry for all the
h. Antec does a good job with PS bundles with their
cases, or
I like fortran which powers my dual rig. Otherwise everything looks good, if you went
AMD you
could save even more money, unless you went 64 which would be about the same.
I don't know if the Pat extensions are coded for linux yet, bu
I haven't noticed an elitist attitude on this list. If I follow the
list policy and post on topic posts most people are friendly and willing to help.
Maybe some people won't hold every ones hand about the most basic stuff. But if they
did
manage to locate Debian.org, we assumed they would know how to use google. Maybe that
assumption was wrong, I find that a little common sense goes a long way.
Good luck with your Gentoo adventure, I wish you the best of luck.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
cuments for wget. At one time I
was thinking about making a howto about wget. But seeing the gnu docs put
me off because they were that good.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
hese long threads get off topic so quick,
now I know! Its nothing against those who posted or anything else, just an
observation. I guess we have some passionate people in here, I just hope its
more toward Debian than anything else.
Rthoreau
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
take
advantage of the new graphics power. Otherwise you might not notice
that much of a difference. Also do you dual boot, you should not
have to change bios settings it should run at 4x, you might want to
see how it performs under Windows. If it works under Windows then
you know its a config p
81 matches
Mail list logo
