Hi,
What's your machine configuration? I've used Linux with Kernels 2.4.18 and
2.2.17 on a Pentium 133MHz machine with 48MB RAM (and before that 32MB) and
128MB Swap (and before that it had 64MB Swap) and I've used KDE and other
WindowManagers and memory monsters such as StarOffice and multipl
On Thursday 13 Feb 2003 6:03 am, S Yuval wrote:
> Hello,
> Can anyone suggest a good C/C++ IDE? I've tried Anjuta, KDevelop,
> KStudio and have been disappointed. The only somewhat useful IDE I could
> find was QIDE, which is a trial product and only supports C.
Hi there,
I'd really like to k
Hi ppl,
I've been reading up on Windows Server 2003 and though I realize that most of
what i'm reading is just wat MS wants me to read,anyways some of the features
seem to be of good potential,Linux has been holding the upper hand in the
Server segment so far, was wondering bout steps being tak
Hello,
Again this may be way too trivial, but I recently did a mkswap on my root
partition instead of the space set aside for swap. I noticed the prob just as
you and switched off the machine and restarted with similar results as you.
To recover I rebooted from my Debian CD and did a fsck /dev
Hello ppl,
I have a Debian 3.0 installation on my P4 2.2 512MB with 256MB Swap system. I
use KDE 3.1.
For sometime, I've been feeling that there's a memory leak in one of the apps
because after quite a few days of use KDE becomes slow. Apps I typically use
are KMail,Konqueror,KMerlin,Konsole,K
Hello,
I'm looking for a Hex Editor, kinda along lines of Norton's NDiags (or
better). Something that will give me access to the different segments of the
Hard Disk and memory and preferably across different partitions.
Would appreciate if you guys could tell me what's the best and where I coul
Hello,
I'm looking for a Hex Editor, kinda along lines of Norton's NDiags (or
better). Something that will give me access to the different segments of the
Hard Disk and memory and preferably across different partitions.
Would appreciate if you guys could tell me what's the best and where I cou
Hello guys,
Someone I know recently got his partition table destroyed by misusing Norton's
Rescue. Anyways, I was able to recreate his partition table using gpart and
Fdisk and Debian's installable CD. The partitions are Win95 Fat32 (LBA)
partitions. I've setup the Id's on the partitions to ref
at 09:05:24PM +0530, Jeetu Golani wrote:
> > Hello,
> >
> > I'm looking for a Hex Editor, kinda along lines of Norton's NDiags (or
> > better).
>
> The only one I've ever used is hexl-mode in emacs. Got the job done...
>
> > Something that will giv
Hey ppl,
I have KDE 3.0.4 running at the moment, had installed the debs of this. I
wanna upgrade to KDE 3.1. I've read that an apt-get upgrade doesn't do the
trick and causes problems. Would appreciate if someone here could tell me
what's the right way to upgrade.
Thanks
--
To UNSUBSCRIBE, e
Hi there,
Your fdisk doesn't show the last ext3 partition, therefore your partition
table is messed up (nothing new in that). Gpart seems to think that there're
two other partitions apart from the ones being detected by fdisk i.e. one
partition more than what you suggested in your earlier mail
them and your total hard disk capacity.
Bye for now
On Wednesday 29 Jan 2003 4:06 pm, you wrote:
> On Wed, 29 Jan 2003 10:41:51 +0530
>
> Jeetu Golani <[EMAIL PROTECTED]> wrote:
> > Hi there,
> >
> > Your fdisk doesn't show the last ext3 partition, ther
530
>
> Jeetu Golani <[EMAIL PROTECTED]> wrote:
> > Hi there,
> >
> > Your fdisk doesn't show the last ext3 partition, therefore your
> > partition table is messed up (nothing new in that). Gpart seems to
> > think that there're two other partiti
Hey guys,
I know someone on this list warned me to wait for
sometime before upgrading to KDE 3.1 however...wat can I say.am an impatient
fool :)
Anyways, I removed my old version of KDE :(.and
I then added the following to my apt sources.list file
deb http://download.kde.org/pub
;... do you mean to:
> - use, for example, the GNU parted to try to create a new partition in
>the place I suppose it was before;
> - try to reboot the system;
> - try to mount the partition;
> - delete the partition
> - [ . . . ]
>
> until it works?
>
> On Wed,
itical operation (I would like not to use window$ in any
> operation at all but I'm a computer sciences student and my school is
> "microsofted" :)))
>
> Thanks everyone.
>
> On Thu, 30 Jan 2003 01:06:57 +0530
>
> "Jeetu Golani" <[EMAIL PROTECTED]&g
Hello,
Lemme first express condolences and grief with regards the tragic loss of the
crew members aboard Columbia. I think they were a very courageous lot to
undertake the risks for the advancement of mankind. Pray that God looks after
them and their families.
I've noticed a behaviour within K
Hi there,
I have a Debian 3.0 with KDE 3.1 and am using KPilot to sync with my Palm m505
over the USB cradle. Have also installed the hotplug package. The USB
interface and modules seem to be in order and lsmod shows everything
expected.
When I press the HotSync button the console shows the ri
Hi ppl,
I'm using Debian 3.0, kernel 2.4.18,KDE 3.1 on a P4 2.2 with 512MB RAM and 256
MB Swap.
I've noticed that in a few days time or weeks the system slows down i.e screen
refresh takes longer, apps may take longer to launch,etc.
The apps I typically use are KDevelop,K3B,Kmail,KMerlin,Wine,
Hi there,
Just been fiddling with Kernel 2.6.0-test2 myself,trying to get sound to work
on my Creative SB Live card. Finally got it to work by using the OSS modules
instead of ALSA. Maybe that'll work for you too.
Good luck.
Bye for now
On Tuesday 05 Aug 2003 6:01 pm, Anthony Campbell wrote:
Hi there,
Please check if your sound drivers have loaded successfully. If you have root
access then do a cat /dev/dsp from root. You should see a flow of weird
chars. If it says device not found then your sound modules haven't loaded up.
If it works fine as root then there's a permission probl
Hello,
Yup did that for a pal once i.e. recover the partition. So long as u don't
play around too much, i.e. repartitioning or reinstalling, your data should
be valid.
Do you remember the approx sizes of all your partitions? Are the other
partitions intact? Do you remember the partition schem
Hey ppl,
I have a Debian 3.0 system with an ext3
partition. I recently installed Mandrake 9.0 on a different partition just to
check it out and therefore had to change the partition structure on my
drive, however Debs been my main workhorse.
I recently noticed a performance degrade on my
Hi,
Alan lemme thank you soo much :)...fsck did the trick
:).i'm currently mailing u from within my Debian system and it's good as
new :)
I really owe you one dude...thanks.
Thanks everyone on this list :)
Bye for now
On Sunday 29 Dec 2002 3:06 pm, Alan Chandler
Hello,
I do have k3b 0.7.5 installed however I installed it from the source. The
website recommends that to be the best way to install it. I know there are
rpm's available that come with Suse and I think the website has rpms too, not
sure of debs though.
I would recommend you install from sou
Hello,
First lemme thank all u guys for all the help u've provided me over time thru
this list.
I'm using a P4 2.2 with 512MB RAM and 256 MB Swap space. OS is Debian 3.0 with
KDE 3.0.4
I've got great uptime with my system lasting for weeks (a month usually) on
end and mostly it's been me who'
Hi,
I'm a novice to Linux and Unix in general. I've
installed Debian on my system - a 133MHz Pentium with 32MB RAM and 2 Hard Disks
with the Linux Swap partition being 8 MB and the core Linux Partition being
484MB.I dont have an idea as to the Debian version however at boot up the Linux
Hey all,I'm using Deb 2.2, with GNOME and Window Maker. I've
noticed that some =windows/dialog boxes seem to be larger than the screen
causing you to =move the window to see it completely.this I find to be
very =irritating and would prefer the Windows kind of approach wherein the
=scree
Hello,
I'm quite a newbie to Linux and emerge mainly from a MS background. I
love Linux and use it as my primary OS though.
I have a question with regards shutting down Linux. When I shutdown Linux
I go into tty1 and press Ctrl-Alt-Del. Now this shuts everything down
including X and it's appli
Hi there,
First, Seasons Greeting and may all of you have an awesome New Year ahead of
you.
I'm using Sarge and KDE 3.1.4 and have just dist-upgraded my system. Though my
system functions normally I don't have most of my fonts in KDE. The Helvetica
font is one such font that I can't locate in
Hello,
I just upgraded my system to Testing and I can no longer compile QT based
applications. ./configure reports lib qt-mt not found however I do have it on
my system. I have libqt3-mt libqt3-mt-dev libqt3-headers however none of my
QT based apps compile. These apps used to compile with Wood
Hi there,
I have a NVidia GeForce2 MX 400 card and I'm trying to use kernel 2.6.0-test2
with it. The kernel compiles fine but I don't have X. I tried recompiling the
driver I was using with kernel 2.4.18 but I get the message that the kernel
doesn't support 2.6.x and newer kernels. I downloade
rial support. By default this is switched to No.
Now all I need is Sound and the Scroll wheel on my mouse to work.
Thanks once again.
Bye
On Wednesday 30 Jul 2003 8:59 pm, [EMAIL PROTECTED] wrote:
> Le Mercredi 30 Juillet 2003 07:55, Jeetu Golani a écrit :
> > Hi there,
> >
> >
Hi there,
I had the same problem as you do. If you're using Mozilla 1.4, u need a java
plugin compiled with gcc-3.2 You can get the latest blackdown java plugin
from www.blackdown.org choose the gcc 3.2 variant there. Or download
unofficial debs by adding the line
deb http://jopa.studentenweb
Hey Chris,
Do you mean you're gonna be installing Terminal Services inside of the guest
OS and other clients should be able to remote use from this?
Am not sure how this will perform within a virtual environment since this uses
a virtual graphics adapter. Would appreciate it if you could write
Hi,
I'm not sure I understand correctly. Etch (Debian 4.0) doesn't include
gcc-4.3.0 (does it??...just did a cursory check on the packages at debian.org
but can't see it). So it can't be in the repository. how're you trying to
install it??.are you trying to compile gcc from source???
Bye
Hi,
I'm using Compiz v0.2.2 and everything works fine - the window decorations et
al. However when i move to a different terminal console - say vt0...when i
return back to my X on vt7, sometimes i lose all window decorations and at
other times I get a blank screen. The keyboard locks out and I
Hi,
I have gmail running on kmailhave been using it for quite sometime. Just
checked my config and I have encryption set to SSL and Authentication method
as Plain. The rest of your config seems alright.
Hope it works out for you :)
Bye for now
On Monday 13 November 2006 22:57, Kamaraju
Hey Ross,
Haven't tried this however I believe the Network Boot Howto is what you're
looking for
http://www.faqs.org/docs/Linux-HOWTO/Network-boot-HOWTO.html
Good luck :)
Bye for now
On Tuesday 23 Dec 2008, Ross Boylan wrote:
> I have an old machine without a working hard disk that I'd like
Hi,
I have a Debian system that I am trying to configure as a router for a MPLS
VPN setup. I'm having trouble setting up the iptables rules to forward
internet traffic from remote locations. Admittedly this isn't my forte
therefore I would sincerely appreciate any help :)
Network Description:
40 matches
Mail list logo
